Export-Mailbox, error code: -2147221219

Hi Guys
When I try to export a mailbox from our Exchagne 2010 Rollup 4 environment (not sp1 or sp2) I recieve the following error:
[PS] C:\Windows\system32>Export-Mailbox -Identity ad.local\user -PSTFolderPath c:\temp\user.pst
Error was found for USERNAME ([email protected] because:
Error occurred in the step: Approving object
. An unknown error has occurred., error code: -2147221219
+ CategoryInfo : InvalidOperation: (0:Int32) [Export-Mailbox], RecipientTaskException
+ FullyQualifiedErrorId : A0E4BB51,Microsoft.Exchange.Management.RecipientTasks.ExportMailbox
I have followed the instructions on the sites mentioned below without any success:
http://www.msexchange.org/articles_tutorials/exchange-server-2010/management-administration/exporting-importing-mailboxes-exchange-server-2010.html
http://www.techguy.at/2010/06/16/export-pst-von-exchange-2010/
If I run the command in verbose mode i can tell that it fails on
VERBOSE: [08:25:50.826 GMT] Export-Mailbox : [USER] Opening Exchange mailbox.
This means that I ofcourse have Outlook 2010 x64 installed on both the computer I try to run the command on and also the server that EMS connects
to. I have tro to tun the command as a domain admin but also as a common user without success.
Please, please help me solve this.

You can also check the below threads for your reference:
Article says that its a bug:
http://www.korneel.nl/?p=28
Try the below threads too:
http://www.telnetport25.com/2011/11/quick-tip-error-2147221219-occurred-in-step-approving-object-during-exchange-2007-export-mailbox-session/
http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/a5734963-b75f-4f92-8f65-b889360341c7/
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c475b553-ef41-4694-b636-83a29f386507
Best Regards, Kranthi-EX "Mark this answer it this is Helpful"

Similar Messages

Exchange 2007 Export-Mailbox Error Message on only certain mailbox

I have searched high and low for a solution to this, but no such luck. Hopefully someone has had the same issue and can help me out.
I am attempting to export and then remove a date range for mailboxes before I migrate to an Exchange 07 server. The mailboxes range in the 10 GB range. I am attempting to use the Exchange 2007 cmdlet to do this with due to it does not have a 2 GB limit like the Exmerge of past.
The command I am using is as follows:
[PS] C:\>Export-Mailbox -Identity User -StartDate "01/01/07" -EndDate "01/30/08"
-IncludeFolders "\Inbox","\Sent Items" -PSTFolderPath c:\PST\pst.pst
This command works fine on some of the mailboxes in the Exchange03 system. But on some of the mailboxes I am getting the following error.
Error occurred in the step: Moving messages. Failed to copy messages to t
he destination mailbox store with error:
MAPI or an unspecified service provider.
ID no: 00000000-0000-00000000, error code: -1056749164
Any ideas?

Hello Joe Rod (and others)
Thought I'd bring this over as a cross post because no-one seems to be picking it up in the 'admin' section. I believe I'm having a similar issue to yourself, as detailed below:
Hi all,
I've already posted this same question elsewhere, but if anyone here can resolve the issue or suggest a better way (without using archiving software - yet!), I'd be most grateful. I'd even be happy if someone can replicate the problem so I know I'm not going mad... I'm trying to set up a quick & dirty quarter year pst mail archive for one of our users on our Exchange 2007 (SP1) box. Using the command:
export-mailbox -id userA -pstfolderpath \\testpath\test.pst -enddate "01/03/2007"
I come up against this error:
Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000, error code: -1056749164
Which I understand is a fairly standard permissions error. Problem is that I know the permissions are set correctly, having tested the function by removing the -enddate parameter; and getting a successful export.
I worked out after a while that the command seems to fall over when it hits a subfolder, so I tested this by using the -includefolders parameter. The command:
export-mailbox -id userA -pstfolderpath \\testpath\test.pst -includefolders '\inbox' -enddate "01/03/2007"
will fail if there are any subfolders under '\inbox'. Add the names of the subfolders:
export-mailbox -id userA -pstfolderpath \\testpath\test.pst -includefolders '\inbox\subfolder1' -enddate "01/03/2007"
and as long as those subfolders don't have any subfolders, I will get a successful export.
Any help appreciated.
Cheers
Dan
If anyone is able to replicate this, please let me know, I'd love to get this sorted. If it is a known problem - can I use someone's PSS contact please?!

Can't publish or export project-error code -108.

I created a project with videos, photos, music etc. The lenght might be a bit long (1h.17) but I did not find any information about a specific limit...When I tried to publish in 1080 hd or any other resolution or even export to quick time after about 30 min it would fail I got the message with error code -108. I have enough space on the hard disk...is there a way to fix it?

I forgot to say that I tried to reboot my mac book Pro with no sucess...

Unable to export movie Error code = -2002

I am exporting using quicktime on my MacBook, Movie to MPEG4, options H.264, Data Rate 1700, image size 768x576 SD, frame rate 30, Key Frame Automatic.
iMovie opens a window that says Exporting project, the line shows progress until it gets to the end, then the error comes up.
Any idea what this error is and what is happening?
Thanks

No it is not answered, but since no one has any comment, just forget I ever posted it.
Bye.

Unable to Export Movie (Error code = -32766)

I get this error message when I try to export as .flv a short (10 sec) movie created in iMovie using three photographs (for use as flash slideshow on a website). Here's what I'm doing: Share>Export Using Quicktim>Export Movie to Flash Video>Save>Error Message.
Anyone got any ideas? Thanks!

No it is not answered, but since no one has any comment, just forget I ever posted it.
Bye.

Export-mailbox to PST file: unknown error in approving object

Hi
I'm trying to validate export/import of PST files with Ex2K7 SP1.
I have this error during export-mailbox, and didn't find anything about it on the Net:
[PS] C:\Documents and Settings\Administrator>Export-Mailbox user01 -PSTFol
derPath C:\temp\
Confirm
Are you sure you want to perform this action?
Exporting mailbox content from the mailbox 'user01' into .pst file
'C:\temp\user01.pst'. This operation may take a long time to complete.
Yes Yes to All No [L] No to All Suspend [?] Help
(default is "Y"):
Export-Mailbox : Error was found for user01 ([email protected]
) because: Error occurred in the step: Approving object. An unknown error has o
ccurred., error code: -2147221241
At line:1 char:15
+ Export-Mailbox <<<< user01 -PSTFolderPath C:\temp\
I'm doing test on one virtual machine hosting AD (win2K3SP2 En), Ex2k7SP1 En, Outlook 2007 Fr.
Could it come from the Outlook or user mailbox language ?
The mailbox have been "initiated", I opened it with OWA, select French language, self sent message. I also opened it with Outlook 2007 on the server.
Thanks.

Hello,
Details u needed.
SUMMARY
The Fixmapi.exe tool is included with Internet Explorer 5 & above to detect and aid in resolving conflicts with Messaging Application Programming Interface (MAPI) files that may affect your ability to send and receive mail and faxes from other programs.
FixMAPI ( What Exactly it does ?).....
Makes a backup copy of the current copy of mapi32.dll on the client computer, and restores mapi32.dll with the MAPI stub library, mapistub.dll.
Quick Info
Exported by:
mapistub.dll
Called by:
Client
Implemented by:
Windows
DWORD STDAPICALLTYPE FixMAPI(void);
Return Values
If the function succeeds, the return value is a non-zero value.
If the function fails, the return value is zero. To get extended error information, call the Microsoft Platform Software Development Kit (SDK) function, GetLastError.
Remarks
FixMAPI does not replace the current mapi32.dll file if the file is marked as read-only.
FixMAPI does not replace the current mapi32.dll if Microsoft Exchange Server is installed on the computer.
When FixMAPI makes a backup copy of the current copy of mapi32.dll on the computer, it assigns the backup copy a name different from "mapi32.dll". It then directs subsequent calls intended for that assembly to the backup copy
URL - > for u r more info. http://support.microsoft.com/kb/228457

Export mailbox from 2010 (sp3) and import into 2007 Sp3 rollup 10

I have no issue exporting the mailbox from 2010.
The issue is importing into 2007. I have a 2003 32 bit server with outlook 2003 sp2 running etc. Every time I try to import I get the below error. Is this even supported?
I've scoured the web, tried fixmapi, added permissions, different switches, etc. The pst attaches fine to the mailbox without issues.
[5/15/2014 8:15:51 AM] [0] [2007import2] Opening Exchange mailbox.
[5/15/2014 8:15:51 AM] [0] [ERROR] Error was found for 2007import2 ([email protected]) because: Error occurred in the step: Approving object. An unknown error has occurred., error code: -2147221219
[5/15/2014 8:15:51 AM] [0] [2007import2] The operation has finished.
Any help or sugesstions would be great!

Steve I see that Belinda suggests that this may be a bug and that you are on SP3, however it may be that you need to update your systems completely to see if the issue is resolved. To be able to find the actual patch level you are on you would need
to follow the steps below. Once you know your actual patch level you can either just update to the latest and greatest and try again OR read through the various fixes for each patch newer then what you have applied
1.   This is the link for the Exchange Server Build #'s including Service Packs
http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-builds-numbers.aspx
a.   Only thing you will not find in this list are the IU (Interim Update #’s) because they are unofficial patches to fix specific issues and then must be uninstalled before moving on to the next RU, CU or SP.
2.   To find the SP, RU, CU level that your server is on use this Powershell command.
GCM exsetup |%{$_.Fileversioninfo}
EXAMPLE 1: Below is the result from a server with 2010 SP1 RU6 installed and you will see this referenced in the above link
Product Version         File Version          File Name
14.01.0355.002           14.01.0355.002   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
EXAMPLE 2: Below is the result from a server with 2010 SP1 RU6 installed WITH an IU from MS and you will not see this version referenced in the above link but it is sequential, i.e. SP1 RU6 is .002 and the IU is 003. So in short by looking at this
and the above link you could easily infer that this system has SP1 RU6 with some type of IU installed.
ProductVersion   FileVersion      FileName
14.01.0355.003   14.01.0355.003   C:\Program Files\Microsoft\Exchange
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Export mailbox to PST - Exchange 2007

I ran this command on my Domain Admin Account from our 2007 Exchange Server 2007 w/ SP3:
[PS] C:\Users\jesse\Desktop>Get-Mailbox | Add-ADPermission -User "jesse.Sams" -
AccessRights GenericAll -ExtendedRights Send-As, Receive-As, MS-exch-store-admin
When I run the command:
Export-Mailbox –Identity <mailboxUser> -PSTFolderPath <pathToSavePST>
-StartDate "<//span>08/29/12" –EndDate "08/29/12"
-DeleteContent
I get the error:
Export-Mailbox : Error was found for First Name ([email protected]) because: Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider.
ID no: 00000000-0000-00000000, error code: -1056749164 At line:1 char:15 + Export-Mailbox <<<<
-Identity first.last -PSTFolderPath d:\archive -StartDate "08/29/12" -EndDate "08/29/12" -DeleteContent
+ CategoryInfo
: InvalidOperation: (0:Int32) [Export-Mailbox], RecipientTaskException
+ FullyQualifiedErrorId : 70397370,Microsoft.Exchange.Management.Recipient Tasks.ExportMailbox
Any help on this issue would be greatly appreciated.
Thanks, Jesse

Hello jwmms,
You can use this command to do that:
Get-mailbox| add-mailboxpermission -user "jesse.sams" -AccessRights fullaccess
Add-MailboxPermission
http://technet.microsoft.com/en-us/library/bb124097(EXCHG.80).aspx
Thanks,
Evan Liu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Evan Liu
TechNet Community Support

Export-Mailbox results in 'Error occurred in step: Approving Object'

Hello,
We have been encountering an issue trying to use the Export-Mailbox command to a .pst, specifically error code -2147221233. I have tried many of the solutions recommended in other threads, including checking installed KBs, verifying permissions, running
fixmapi, but so far none of addressed the problem.
Any help would be appreciated. The following is the log file output:
[10/17/2014 14:48:57.0777] [0] Executing Command: ' $scriptCmd = {& $wrappedCmd @PSBoundParameters }'
[10/17/2014 14:48:57.0793] [0] Trying to open registry key 'Software\\Microsoft\\Windows\\CurrentVersion\\App Paths\\OUTLOOK.EXE'.
[10/17/2014 14:48:57.0793] [0] The default value of the registry key is 'C:\Program Files\Microsoft Office 15\Root\Office15\OUTLOOK.EXE'.
[10/17/2014 14:48:57.0809] [0] The version of Outlook.exe is '15.0.4420.1017'.
[10/17/2014 14:48:57.0809] [0] Current ScopeSet is: {Domain Read Scope: {, }, Domain Write Scope(s): {, }, Configuration Scope: {, }, Server Configuration Scope(s): {, }, , Exclusive Scope: {, }}
[10/17/2014 14:48:57.0809] [0] Searching objects "[email protected]" of type "ADUser" under the root "$null".
[10/17/2014 14:48:57.0855] [0] Previous operation run on global catalog server 'DOMAINCONTROLLER'.
[10/17/2014 14:48:57.0855] [0] Processing object "Domain/Users/user".
[10/17/2014 14:48:57.0887] [0] Searching objects "Mailbox Database 1148204553" of type "MailboxDatabase" under the root "$null".
[10/17/2014 14:48:57.0902] [0] Previous operation run on domain controller 'DOMAINCONTROLLER'.
[10/17/2014 14:48:57.0918] [0] Exporting mailbox 'Domain/Users/user' from server 'EXCHANGE' to \\EXCHANGE\Export-PST\export.pst.
[10/17/2014 14:48:57.0918] [0] Searching objects "Mailbox Database 1148204553" of type "MailboxDatabase" under the root "$null".
[10/17/2014 14:48:57.0933] [0] Previous operation run on domain controller 'DOMAINCONTROLLER'.
[10/17/2014 14:48:57.0965] [0] Resolved current organization: .
[10/17/2014 14:48:57.0965] [0] Ending processing.
[10/17/2014 14:48:57.0965] [0] [name] The operation has started.
[10/17/2014 14:48:57.0965] [0] [name] Initializing MAPI; loading library.
[10/17/2014 14:48:58.0245] [0] [name] Approving object.
[10/17/2014 14:48:58.0417] [0] [name] Logging on to the MAPI profile.
[10/17/2014 14:48:58.0682] [0] [name] Opening Exchange mailbox.
[10/17/2014 14:48:59.0072] [0] [ERROR] Error was found for name @ email ([email protected]) because: Error occurred in the step: Approving object. An unknown error has occurred., error code: -2147221233
[10/17/2014 14:48:59.0072] [0] [name] The operation has finished.

Hi CFBM
Thank you for your question.
This is a permission related error. It means you have not permission to access user mailbox.
You can try to give yourself full access permission to user mailbox
You can refer to the following links :
https://social.technet.microsoft.com/Forums/en-US/60734a88-ac1e-441c-98c0-d150b08392fb/importmailboxexportmailbox-fails-on-approving-object-permissions-issue?forum=exchangesvradminlegacy
https://social.technet.microsoft.com/Forums/office/en-US/151b60d3-3045-471a-a717-71408e72e286/unable-to-export-a-pst-file-using-exchange-management-console-in-exchange-2007?forum=exchangesvrgenerallegacy
If there are any questions, please let me know.
Best Regard,
Jim

Error: The specified mailbox database [Mailbox Database Name] does not exist, when you try to export mailbox in Exchange 2007

[Symptom]
======================
In Exchange 2007, when you want to export mailbox to a .pst file, you should run the
Export-Mailbox cmdlet from a 32-bit computer that has the following installed:
The 32-bit version of the Exchange management tools
Microsoft Office Outlook 2003 SP2 or later versions
If not, you may encounter the following error message:
You check that you have these required installed, but you get the error below when you run Export-Mailbox in EMS.
“The specified mailbox database [Mailbox Database Name] does not exist.”
[Cause Analysis]
=======================================
This is because that the account you use to run Export-Mailbox cmdlet don’t have the Exchange Server Administrator role assigned.
You can check if this account has been delegated the Exchange Server Administrator role through the following path.
EMC -> Organization Configuration-> Check permissions in the result pane.
To delegate this Exchange Server Administrator role, right click on the
Organization Configuration node and choose Add Exchange Administrator,
you will see the Add Exchange Administrator window.
[More Information]
==============================
Export-Mailbox
http://technet.microsoft.com/en-gb/library/aa998579(v=exchg.80).aspx
How to Export and Import mailboxes to PST files in Exchange 2007 SP1
http://blogs.technet.com/b/exchange/archive/2007/04/13/3401913.aspx
Exchange 2007 cannot export pst files via its powershell
http://social.technet.microsoft.com/Forums/forefront/en-US/b3bc0dce-35f3-4a69-9a33-4f2a855b9f94/exchange-2007-cannot-export-pst-files-via-its-powershell?forum=exchangesvrgenerallegacy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Based on my test, if you make the user the owner of the database (rather than a user with the db_owner role), when you create a query, it creates it under the dbo schema rather than DOMAIN\username.
Steps to do so (in Management Studio):
Right click database, select Properties
Click File
Change Owner in the textbox
OK to confirm
Downside - other users under db_owner role will still have their username appended. So schemas have to be created for these users.
Jaynet Zhang
TechNet Community Support

I have been exporting lightroom webgaleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup. Stopped, disconnected and the project exported!

Error code = -50 every time I try and publish or export (except Quicktime)

When I try and do any kind of publish or export (other than "Export using Quicktime") it will say "preparing" then will immediately go to a dialog that says:
Unable to prepare the project for publishing. The project could not be prepared for publishing because an error occurred. (Error code = -50)
I have no idea what next.
Thanks,
Nate

Configuration error 16 | CC, CS

Site mailbox always throwing error code 0

Hello,
In our SharePoint environment I have configured site mailbox as per instruction given at technet site. While running the ps1 script to setup mailbox  I have not received any error. All setup has been ok.
But while I have added site mailbox app to one of the subsites and clicking on site mailbox I am always getting error like "We are facing troubled while contacting with the SharePoint Server and error code is showing as 0 "
I have checked the sharepoint log and found below error is throwing
The scale out database mappings cache has been refreshed for service id 275cb0da-777d-4f5f-aff5-78558afa3be3.
The new mappings are as follows:
For database Data Source=SQL12-3\INST3;Initial Catalog=AppMng_Service_DB_290fd9b502d34f07bb428a52788d4a36;
Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15:
range start 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00, range end NULL. b95d899c-c3a4-e04a-1a4b-6d2b28c555e5
04/21/2014 10:47:21.96 w3wp.exe (0x21B8)                       0x13D4 SharePoint Portal Server
Site Mailbox                  ajv81 Exception System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.Portal.CollaborationMailboxInternalService.ExchangeHasPermissionsToSiteSubscriptionInternal(SPWeb web, CollaborationMailboxErrorCodes& errorCode)     at Microsoft.SharePoint.Portal.CollaborationMailboxInternalService.<>c__DisplayClassf.<ExchangeHasPermissionsToSiteSubscription>b__e()
StackTrace: at Microsoft.Office.Server.Native.dll: (sig=678c0f87-966f-4d99-9c94-b49e788d2672|2|microsoft.office.server.native.pdb, offset=131CE) at Microsoft.Office.Server.Native.dll: (offset=21BE5) b95d899c-c3a4-e04a-1a4b-6d2b28c555e5
04/21/2014 10:47:21.96 w3wp.exe (0x21B8)
I am struggling to resolve this issue from last 7 days.
Any help to resolve this issue would be appreciated.
Thanks

Hi,
Please refer this one
http://www.scinaptic.com/support/0109.html
If its not helping you please let me know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

How do I export from IMovie when "not enough room in Heap Zone" error code appears? How can I correct, what to Do.."export movie" insteand of Media browser or IDVD? Finalize movie? I want to burn it to DVD!

How do I export from IMovie to Wondershare Creator to Make DVD and share hour long movie when I am unable to "publish" movie on Media Browser of IDVD because the error code "not enough room in heap Zone/ " appears and function is aborted.
I shortened the movie, that is no cure...Correcting date info on clips does not pertain. Why would Apple throw roadblocks in your way without solving problems they create?
A techie made an appointment on the phone and was totally incapable of addressing the problem.
What is a heap zone????

Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

Export-Mailbox, error code: -2147221219

Similar Messages

Maybe you are looking for