Export Mailbox from Exchange 2010 and Import to Exchange 2007

Hello,
I exported mailbox (1GB in size) from Exchange 2010 to *.pst file; I need to import it into
Exchange 2007 mailbox. Is it supported ?
The operation completed successfully (no errors) but no items were imported; is it due to unsupported backward compatibility or some other issue ?
Thank you,
Luca
Disclaimer: This posting is provided AS IS with no warranties or guarantees, and confers no rights. Whenever you see a helpful reply, click on [Vote As Help] and click on [Mark As Answer] if a post answers your question.

I also have the same issue. Exported mailboxes on Exchange 2010 SP3 latest updates using
New-MailboxExportRequest and then tried to import into mailbox on Exchange 2007 SP3 with latest updates. The 32-bit client machine used for the import has Outlook 2010 SP1 (SP2 and later updates causes a different error). I used Outlook 2010 because the E2K10
New-MailboxExportRequest documentation states that you have to use Outlook 2010 or later. The PST files created can be opened and imported via Outlook but not with the
Import-Mailbox cmdlet (with no error as stated in this thread). Other PSTs, not created from E2K10 export do import just fine. I also ran ScanPST.exe against the exported PST and then ran the import again and it worked, everything got imported. Interestingly
the test mailbox PST file I was using was 761 KB but after the ScanPST it was 1,257 KB - must be some difference in the PST format that the Import-Mailbox cmdlet can't deal with.
Does anyone have any other solutions or
workarounds to this. I've got over 900 mailboxes I need this for due to an
acquisition? Has anyone tried using Outlook 2013 on the machine used for doing
the Exchange 2007 imports or does Outlook 2013 also have the same issue as later versions of Outlook 2010 (Exchange Mailbox import failed with error code 2147221233)?

Similar Messages

Exchange 2010 and UM on Exchange 2013

Hello,
We are going to migrate from Exchange 2010 to Exchange 2013 in a few month, but we want to add UM right now. Can I add UM 2013 now and build everything else later?
Thank you.
Thank you. Eric.

What I'm a little foggy on is if the mailbox needs to be on a 2013 mailbox server for the 2013 UM server to properly deliver the voicemail item.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
Once the SIP connection is pointed to 2013, it will handle both the 2013 and 2010 Mailboxes in the Dial Plan, yes.
and dont forget to move the System Mailbox to 2013:
http://technet.microsoft.com/en-us/library/dn169226(v=exchg.150).aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Export playlists from my iMac and import them to my MacBook Pro

Both computers have the same library, however I can not export my playlists from my iMac to my MacBook Pro. The name of the playlist imports into my library but the music doesn't. Any suggestions..

Export the playlist as an .xml file not .txt and it should work.
Cheers-

Export database from Oracle 8i and import to Oracle 10 g EX

Hi
I'm beginner Oracle user .Sorry for my english
I have server oracle 8i on Novell system. Now I installed Oracle 10 g Expres on Windows XP. How move data from Oracle 8i to Oracle 10 g EX.
Thanks for Your help

Pl see the documentation - http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/impexp.htm#CFHJAHAA
You will need to export from the 8i database, copy the file (in binary format) to the Windows server, then import into the 10g database
HTH
Srini

Export Data from Oracle 10g and import in SQL server

Hi Guys,
I have assigned a task in which I am required to transfer data from oracle database to SQL server. I have not done this before. Can anybody help me the easiest way to accomplish this. Thanks

One way of doing this is setup Heterogeneous Database connections
http://www.dba-oracle.com/t_heterogeneous_database_connections_sql_server.htm
I am sure there's other options out there.

Exporting from SharePoint 2010 to Import into SharePoint Foundation 2010

I have a need to Export several site collections from SharePoint 2010 and to import them to an isolated SharePoint Foundation 2010 server. Is it possible? What problems might I incounter?
Thanks for your assistance.

Hello, Here is the thread providing some options to move the site collections. Thanks,
http://social.technet.microsoft.com/Forums/sharepoint/en-US/23d7412c-efb8-47f9-9269-9375fdea7242/how-best-to-move-a-site-collection-to-a-new-server-sharepoint-server-2010?forum=sharepointadminprevious
Please mark as answer if this helps or vote as helpful if provides some help.

Create a visual web part which get data from excel sheet and import it into sql server database in sharepoint 2010 (development)

Hi,
I want to create a visual webpart which will read data from excel sheet and import it in to sql server database.(using sharepoint development)
I want to do it using visual webpart.
Please help to solve the issue.
Thanks in advance!
Regards
Rajni

Hi Rajni,
Microsoft.Office.Interop.Excel assembly provides class to read excel file data, in your web part solution, reference the assembly, and following blog contains samples about how to read the excel file data,
and import it to SQL database.
1.Create a Visual Web Part Project:Create
Visual Web Parts in SharePoint 2010
2.Read the excel workbook by using SPFile class:
http://alancejacob.blogspot.in/2012/06/read-data-from-excel-file-and-insert-in.html
http://stackoverflow.com/questions/14496608/read-excel-file-stored-in-sharepoint-document-library
3.Export the excel workbook to SQL Server:
http://www.c-sharpcorner.com/UploadFile/99bb20/import-excel-data-to-sql-server-in-Asp-Net/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Primary mailbox (on Exchange 2010) and Personal Archive (on Exchange 2013), possible?

Current environment is Exchange 2010 SP3 RU5 supporting 4,000 Users. Client estate is Outlook 2010 SP1 going on SP2.
We're pulling our Archiving solution away from 3rd party and back into Exchange. Implementing a new set of Exchange 2010 Servers (old DAG or in a new Archive DAG) would be easy. But is there Exchange 2013 stepping stone potential?
Can the Archive DAG / Archive mailboxes be on 2013? i.e. for any given User, leave their primary mailbox on Exchange 2010 and create new Archive mailbox on 2013.
I want to avoid implementing 2010 Archive Servers and then go 2013 Archive 6 months or a year later.
This article suggests 'no':
http://technet.microsoft.com/en-gb/library/dd979800(v=exchg.150).aspx
"Locating a user’s mailbox and archive on different versions of Exchange Server is not supported."
I've found little info but the odd statement here / there.
Is this the latest position? Is it that cut & dry? Anyone tried it? Why won't it work (or will it but it's not supported)?
Thanks!

<I had a response from MS>
Below is a summary of the case for your records:
Symptom:
=============
Is it possible to implement a 2013 environment to host the Archive mailboxes? i.e. for any given User, their primary mailbox is on Exchange 2010 and their Archive
mailbox is on 2013.
Resolution:
=============
It’s not supported to have a user’s primary mailbox reside on an older Exchange version than the user’s archive. If the user’s primary mailbox is still on Exchange
2010, you must move it to Exchange 2013 before or at the same time when you move the archive to Exchange 2013.
http://technet.microsoft.com/en-us/library/jj651146(v=exchg.150).aspx
as per the repro in our lab, having the archive mailbox in higher version of exchange would fail with the error above
<the scenario isn't completely relevant, looks like he's trying to put the Primary on 2013 and not the Archive, no matter, we've established there are problems, question is whether they are looking into this area / to patch, they go on...>
At this point in time we don’t have a conformation from the product team, if the above would change in the future exchange versions.
<MS did say on the call that they were not looking at fixing it, naturally this isn't a "never", as per previous statement - they can't commit 100% to the future, but they've provided me the answer - they are not currently looking at resolving/providing
this as a migration scenario, end.>

Hello i need a help about script to export translatable text strings from ai files and import them back

Hello i need a help about script to export translatable text strings from ai files and import them back after editing, thanks in advance

Lanny -
Thank you for taking the time to help with this problem. Can I just say however that as someone who has posted a first comment here and quite clearly never used a forum like this before, your comment unfortunately comes across as very excluding. It makes me feel there are a set of unwritten rules that I should know, and that I don't know them shows that the forum is not for me. In short, it's exactly the kind of response that stops people like me using forums like this.
I'm sure it's not intended to be received like this and I am sure that the way you have responded is quite normal in the rules of a forum like this. However, it is not normal for those of us who aren't familiar with forums and who only encounter them when they have a genuine problem. This is why I hope it is helpful to respond in full.
The reason I posted here is as follows. I was directed here by the apple support website. The original comment seemed to be the only one I could find which referred to my issue. As there is no obvious guidance on how to post on a forum like this it seemed perfectly reasonable to try and join in a conversation which might solve more than one problem at once.
Bee's reply however is both helpful and warm. This could in fact be a template for how new members should be welcomed and inducted into the rules of the forum in a friendly and inclusive way. Thank you very much indeed Bee!

Export from one version and import into another version

We have a customer database that accidently got updated to 10.2.x but our application only supports 10.1.5 What we are wondering can we export the 10.2 database and import it into a new system that is at our supported version of 10.1.0.5?
Will the import even work or will it fail with unsupported version? Any other things we should be aware of?

ro**** wrote:
We have a customer database that accidently got updated to 10.2.x but our application only supports 10.1.5 What we are wondering can we export the 10.2 database and import it into a new system that is at our supported version of 10.1.0.5?
Will the import even work or will it fail with unsupported version? Any other things we should be aware of?between versions export MUST ALWAYS be done with lowest version of export utility!

Exchange 2010 and Synchronizer Version 14.0.7108 (Sync Errors with Outlook and ActiveSync)

I have a user getting multiple emails (10-20) every day pertaining to Synchronizer Version 14.0.6109
Here is a sample:
11:09:31 Synchronizer Version 14.0.7108
11:09:31 Synchronizing Mailbox 'xxxxxxx'
11:09:33 Synchronizing server changes in folder 'zzzzzzz - Calendar'
11:09:34 Downloading from server 'xxxxxxlan.net'
11:09:35 Error synchronizing folder
11:09:35                  [80070005-508-80070005-560]
11:09:35                  You do not have sufficient permission to perform this operation on this object. See the folder contact or
your system administrator.
11:09:35                  Microsoft Exchange Information Store
11:09:35                  For more information on this failure, click the URL below:
11:09:35
http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=80070005-508-80070005-560
11:09:35 Done
9:26:06 Synchronizer Version 14.0.7108
9:26:06 Synchronizing Mailbox 'xxxxxx'
9:26:06 Synchronizing local changes in folder 'Drafts'
9:26:06 Uploading to server 'xxxxxx.net'
9:26:06 Synchronization of some deletions failed.
9:26:06           [0-130]
9:26:06     1 item(s) deleted in online folder
9:26:06 Done
14:10:01 Message class: {SU:IPM.Note}
14:10:01 Mail Conflict Resolution
14:10:01 Local subject: {SU:Modification Resolution}
14:10:01 Remote subject: {SU:Modification Resolution}
14:10:01 Local Message Entry ID: {CB:70, LPB:0x000000004C521F45AF387146A60CA3323B67D04707002BE9FDD1BCA97D40BA307827218DB8F000000B31DB240000A7551752DD78844FA0521ED41E1AF099005F6F9512450000}
14:10:01 Remote Message Entry ID: {CB:70, LPB:0x000000004C521F45AF387146A60CA3323B67D04707002BE9FDD1BCA97D40BA307827218DB8F000000B31DB240000A7551752DD78844FA0521ED41E1AF099005F6F9512450000}
14:10:01 Local Message ChgKey: {CB:20, LPB:0x25576F30D487BE419D9C9A7D544A035600003CB6}
14:10:01 Remote Message ChgKey: {CB:20, LPB:0x25576F30D487BE419D9C9A7D544A035600003CB6}
14:10:01 Local Message PCL: {CB:21, LPB:0x1425576F30D487BE419D9C9A7D544A035600003CB6}
14:10:01 Remote Message PCL: {CB:21, LPB:0x1425576F30D487BE419D9C9A7D544A035600003CB6}
14:10:01 Checking local modifications
14:10:01 Overwrite property: 0x10800003
14:10:01 Overwrite property: 0x10810003
14:10:01 Overwrite property: 0x10820040
14:10:01 Compare property: 0x3FDE0003
14:10:01 Getting remote properties
14:10:01 Checking remote modifications
14:10:01 Compare (conflict) property: 0x3FDE0003
14:10:01 Local: {I4:28591}
14:10:01 Remote: {Error (0x8004010F)}
14:10:01 Not equal (conflict) property: 0x3FDE0003
14:10:01 Local modification: {19:09:41.0274 11/11/2014 [DD/MM/YYYY]}
14:10:01 Remote modification: {19:09:41.0274 11/11/2014 [DD/MM/YYYY]}
14:10:01 Forcing Local item to win.
14:10:01 Conflict generated, local item is winner
The server is exchange 2010
The user uses outlook 2007, 2010 and 2013 on multiple work stations and laptops as well as active sync on a mobile device.
Any suggestions on how to start to diagnose exactly what is generating the issue?
networktec

Hi There,
it seems like some permisson issue and some folder/files been deleted already. Please refer to this link below
https://support.microsoft.com/kb/2606009?wa=wsignin1.0
For permission issue, is he using any shared folder on outlook and make sure he has proper access on that one too.
UMESH DEUJA MCP,MCTS,MCSA,CCNA
I saw that article, and I wasn't sure how to proceed as this user has multiple computers they log into, and I don't think it would be possible to apply these "hot fixes' on every device they use...
Outlook 2013
To improve functionality in Outlook 2013, install the Outlook 2013 hotfix package that is dated April 8, 2014. For more information
about this hotfix package, click the following article number to go to the article in the Microsoft Knowledge Base:
2878323 Description of the Outlook 2013 hotfix package (Outlook-x-none.msp): April 8, 2014
Outlook 2010
To improve functionality in Outlook 2010, install the Outlook 2010 hotfix package that is dated April 8, 2014. For more information
about this hotfix package, click the following article number to go to the article in the Microsoft Knowledge Base:
2878254 Description of the Outlook 2010 hotfix package (Outlook-x-none.msp): April 8, 2014
networktec

Error synchronizing folder [8004010F-501-8004010F-0] - Exchange 2010 and Outlook 2010, multiple users get dozens of these per day

15:27:30 Synchronizer Version 14.0.6025
15:27:30 Synchronizing Mailbox 'abc xyz'
15:27:30 Error synchronizing folder
15:27:30
[8004010F-501-8004010F-0]
15:27:30
The client operation failed.
15:27:30
Microsoft Exchange Information Store
15:27:30
For more information on this failure, click the URL below:
15:27:30
http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=8004010f-501-8004010f-0
15:27:30 Done
kbj

Hi,
Please try below steps:
- Remove all organizational forms libraries (subfolders under EFORMS Registry) if they are not needed, and re-create the Outlook profile of affected users.
- Alternatively, if the organizational forms libraries are needed, remove the replica from Exchange 2010 and re-add it
Best Regards!

Microsoft Exchange 2010 and Outlook 2013

My colleagues computer suddenly crashed yesterday and it wouldn't restart without a system restore.
Now when we try to open up Outlook it says that you must connect to Microsoft Exchange at least once before you can usse your Outlook Data file (.ost)
Also The PC has lost the trust relationship on the domain
We have exchange 2010 and the servers OS is Microsoft Windows Small Business Server 2011 and the Client PC is running off of Windows 8.
Can you please help me resolve this issue?
kind regards
Steve Bradshaw
[email protected]

It might be possible that the MAPI key (which enables Outlook to synchronize with Exchange) has been deleted due to the System crash. So, in order to establish the connection, you need to Reconnect the OST file to the original MAPI profile and then reconnect
then MAPI profile to Exchange Server.
If the above method fails to resolve the issue, then the best option for you would be to take the help of any professional OST to PST Conversion Software, which will help you to Extract data from your OST file and convert it to PST file which you can import
back to your Outlook to establish the connection with Exchange Server again.
You can check this
presentation for more info.

Single name space in between Exchange 2010 and 2013

Hi,
In my current environment I have 2 Exchange 2010 servers with DAG no CAS NLB. I installed Exchange 2013 with 2 CAS with WNLB and 2 Mailboxes with DAG. The main requirement is to configure Single name space to access in between Exchange 2010 and Exchange
2013. On Exchange 2010 DAG there is a URL using is owa.domain.com and I also configured in Exchange 2013 all the virtual directories with this name owa.domain.com but having an issue that when I open explorer and use the owa.domain.com URL the user on Exchange
2013 gets their mailbox but user on Exchange 2010 gets error HTTP 403 blank page.
I observed that in Exchange Organization settings CAS settings one server OWA, ECP etc shows their internal external URL but the other server unable to open the OWA, ECP URL and give error message that "An IIS directory entry
couldn't be created. The error message is Access is denied. HResult = -2147024891"
Please guide how to resolve this issue and use the same name URL in Exchange 2010 and Exchange 2013
Thanks,

Hi,
See the below brief:
User will connect to mail.contoso.com as his namespace endpoint. CAS2013 in Site1 will authenticate the user, do a service discovery, and determine that the mailbox version is 2010 and is located within the local AD site. CAS2013 will proxy the
request to an Exchange 2010 Client Access server which will retrieve the necessary data from the Exchange 2010 Mailbox server
Go through the full blog for better understanding of the redirection.
Client Connectivity with Exchange 2013
Hope you have changed your DNS records to direct connections only to your new Exchange 2013 server. You'll move the host names (for example, mail.contoso.com) users have been using to connect to Outlook Web Access, Autodiscover, and so on, from your
Exchange 2010 server to your Exchange 2013 server. When an Exchange 2010 user tries to open their mailbox, the Exchange 2013 server will proxy their request and communicate with the Exchange 2010 server on their behalf.
Configuring DNS includes the following:
Change the primary host names, such as mail.contoso.com, autodiscover.contoso.com, and owa.contoso.com (if used) to point to the external, publically-accessible, IP address of the Exchange 2013 Client Access server with your public DNS provider.
Change the primary host names, such as mail.contoso.com (or internal.contoso.com if you're using different internal host names) and owa.contoso.com (if used) to point to the internal machine name of the Exchange 2013 Client Access server on your internal
DNS servers.
NOTE- Go through the Exchange Deployemnt Assitant - Configure DNS Records section
Regards,
Satyajit
Please“Vote As Helpful”
if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Exchange 2010 and 2013 coexistence Internal and external URL

Hi all,
been reading alot of threads about Outlook anywhere and virtual directories in co-existence exchange 2010 and 2013.
Still i dont get any smarter.
Here is scenario:
Exchange 2010
Cas1
Cas2
Mailbox1
Mailbox2
Casarray is Exchange.casarray,com ( internal dns pointed to CAS1 in exchange 2010).Seems like by default both exchange 2013 cas servers are added to the casarray.
Exchange 2013
CAS+Mailbox
Cas+Mailbox
DNS
mail.exchange.com pointing to VIP (kemp loadbalancer)
Autodiscover ( pointed to same vip ,kemp load balancer)
Outlook anywhere on all servers (2010 and 2013)
Internal ( pointing to VIP on Kemp)
External ( pointing to external IP,then it passes firewall that again passes to kemp)
Problem we are having is when migrating users from Exchange 2010 - 2013.
Users using Outlook 2010
restart of outlook and mail works fine.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Users using Outlook 2013
Outlook in disconnected status,only fix is to create new profile.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Question is,what should be set for internal and external url (active sync,owa,ews)on 2010 and 2013 servers?
Where is the config wrong?
Thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Hi Martina,
did the test as mentioned,even tried both CAS 2013 servers.Flush and registerdns didnt help.
Still Outlook is Connected to the cas.exchange.as (which again Points to 1 of Exchange 2010 servers),
Tried repair Outlook profile,no og.Only fix is to setup New account.
Any more tips?
thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Export Mailbox from Exchange 2010 and Import to Exchange 2007

Similar Messages

Maybe you are looking for