Export Media error

I am running Premiere Pro CS4 version 4.2.1
When I do file/export/media I get a warning dialog that says "An Adobe Media Encoder update is available for this version of Premiere Pro. To download the latest update, please run the Adobe Updater from the Help menu or visit http://www.adobe.com/downloades/updates" click OK
It then goes into the media export dialog but it will not export to any format. When I run Adobe Updator it does not find any for my system.
Any thoughts or suggestions?
Thanks,
Phil

I think I may have figured out what is causing the error. The other day, I was messing around in my MSCONFIG file to tweak some of the boot settings (see attached) under Advanced options.
You'll notice that the Debug option is checked. I'm not sure if it was that way as default or if I accidentally activated it when tweaking the Processors/Memory settings, but after UNCHECKING Debug and restarting, I'm no longer having that error.
Hope that helps anyone else...

Similar Messages

How can I export an iMove Project if the Event file was deleted? (Missing Media error message)

Deep iMovie question:
I accidentally deleted various EVENT files from my iMove EVENTS folder. Yes, they are really gone ... this is NOT a matter of restoring them from the trash.
The projects are still there ... I can still watch the projects as long as I am in iMovie ... but if I try to export the Project I get the MISSING MEDIA error message.
Logic tells me that if I can view the project ... the file has to be SOMEWHERE inside my computer ... else I couldn't be watching it ... right? I mean what am I watching if not some file somewhere which has moving pictures stored in it?
So HOW do I get to something I can export? What am I watching when I watch the project?
I have iMove 08 on iMac with OS 10.6.8
Normally works great for my simple needs ... except if you move or delete an event file ...
Can anyone out there help?
thank you,
Natasya

If you don't have the original files then I'm afriad you don't have anything to work with.
Regards
TD

Serious Error shutdown message while exporting media

I am encountering an odd error message (from which I have never seen) when trying to export a project from Premiere Pro CC.
The error message (Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project) shuts down Premiere about 11-25% into the export. If I remove all effects on the media, the file exports fine, but will not if the effects remain on the media.
I have checked the permissions (as per Adobe forum advice), and they all allow me to read and write files, so that is not the issue. I have also restarted my computer, uninstalled / reinstalled Premiere, and tried rendering in different outputs, none of which have worked.
I also have the error code, but am unaware of how to attach it to this question.
Set up:
Late 2012 iMac
Mac OSX 10.9.2
3.9 GHz Intel Core i7
8GB memory
NVIDIA GeForce GTX 680MX 2GB
Premiere Pro CC
Using H2.64 in .MP4 files
Installed Plug ins:
Red Giant Magic Bullet Color Suite (used DeNoiser II in media)
Has anyone any clue as to what I should do/try next?
Thanks for any input,
Michael

I apologize about the length, but I am unaware of how to attach the error
code, so I am just going to past them.
Error code 1:
Process: Adobe Premiere Pro CC Re: Serious Error shutdown message while exporting media!
Path: /Applications/Adobe Premiere Pro CC/Adobe Premiere Pro
CC.app/Contents/ MacOS/Adobe Premiere Pro CC!
Identifier:
Version:
Code Type:
Parent Process: launchd Re: Serious Error shutdown message while exporting media!
com.adobe.AdobePremierePro! 7.2.2 (7.2.2)!
X86-64 (Native)!
Responsible:
User ID:
Date/Time:
OS Version:
Report Version: 11!
Anonymous UUID: 8711E967-3395-F259-0577-C241B4768D8A! !
Sleep/Wake UUID: A31DF803-DBB0-48DE-800A-9076E03B5328!
Crashed Thread: 72 Dispatch queue: opencl_runtime!
Adobe Premiere Pro CC Re: Serious Error shutdown message while exporting media! 501!
2014-04-22 16:50:02.373 -0400! Mac OS X 10.9.2 (13C64)!
Exception Type: EXC_BAD_ACCESS (SIGSEGV)!
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008! !
VM Regions Near 0x8:!
--> !
__TEXT 0000000100000000-0000000100003000 Re: Serious Error shutdown message while exporting media r-x/rwx SM=COW /
Applications/Adobe Premiere Pro CC/Adobe Premiere Pro
CC.app/Contents/MacOS/Adobe Premiere Pro CC!
Thread 72 Crashed:: Dispatch queue: opencl_runtime!
   0 com.apple.GeForceGLDriver !
   1 com.apple.GeForceGLDriver !
   2 libGPUSupportMercury.dylib !
0x00001234402e3ec4 0x123440000000 + 3030724! 0x00001234402e4361
0x123440000000 + 3031905! 0x00007fff89e1f8f7 gldLoadBuffer + 80!
0x00007fff95dedb16
0x7fff95dbd000 + 199446! 0x00007fff95df9d61 0x7fff95dbd000 + 249185!
0x00007fff95ddca4a
0x7fff95dbd000 + 129610! 0x00007fff95de01f0 0x7fff95dbd000 + 143856!
   3 com.apple.opencl
   4 com.apple.opencl
   5 com.apple.opencl
   6 com.apple.opencl
   7 libdispatch.dylib !
   8 libdispatch.dylib !
   9 libdispatch.dylib !
   10 libdispatch.dylib
   11 libdispatch.dylib !
   12 libsystem_pthread.dylib
   13 libsystem_pthread.dylib
0x00007fff8b8a82ad dispatchclient_callout + 8! 0x00007fff8b8aa68f
dispatchqueue_drain + 451! 0x00007fff8b8ab9dd dispatchqueue_invoke + 110!
0x00007fff8b8a9fa3 dispatchroot_queue_drain + 75! 0x00007fff8b8ab193
dispatchworker_thread2 + 40!
================================
Error code trimmed down to essentials by moderator, with full report attached.

When sharing through the export media option as pro res 422 i get error code 108

when sharing through the export media option as pro res 422 i get error code 108 and message saying could not complete because an error occurred when encoding frame 3297 - error 108!!!
what is this frame...is it a jpeg file i have imported...how do i locate it... its a 40 minute movie and it will share to dvd just wont let me create a quicktime .mov file... any suggestions.

What frame rate is the project? Divide the 3297 by the frame rate to get an approximate location? What are the specs of the media at that location, video and audio?

Exported media file size issues Sometimes one size, Sometimes another without making any changes in FCPX?

Hi there
I'm having some strange issues with files sizes from
Share>Export Media
I'm not changing anything about the video (just moving an audio track forwards and backwards ever so slightly to try and get it to the correct timing), nor am I changing anything about the way I export the video.
I am always using the EXACT same settings
Sometimes finder states my video is 1.15GB, sometimes its states its 3.8GB
But then when I close Finder down and then go back into Finder again to find the file it states its gone from 1.15GB to 3.8GB
I'm not sure if this is a error with my system or Final Cut Pro X?
By the way I'm running 10.0.5
Thanks

Bob,
Well, the issue has gone to press and I have upgraded to Snow Leopard and CS5. Initial tests show that the problem still exists, and that it is related to the XML tags. The problem occurs both with legacy (CS4) documents and documents created from scratch in CS5. As I mentioned before, it only seems to happen when overrides are applied to paragraph styles.
Here is a sidebar as exported from InDesign. Overrides were applied to the two headlines to modify color, point size and baseline shift:
The file with XML tags, packaged and opened in InCopy CS5:
The same file with XML tags removed, packaged and opened in InCopy:
OK. Now is when things start to get really interesting.
I thought perhaps that exporting the InDesign file as an IDML document, then reopening it, might perhaps fix the problem. But, no. In fact, when I reopened the IDML file in InDesign, the font styles were broken in _exactly_ the same places as they were in InCopy. Apparently, whatever problem InCopy is having with the XML tags is being duplicated by the IDML export. (Do these processes share the same file format?)
For example, here is a title page from the magazine as a screen grab in InDesign. Overrides were applied to the top headline on a line-by-line basis:
The same file, exported as an IDML file and reopened in InDesign:
As with InCopy, when the XML tags are removed, the IDML file reopens in InDesign just fine. Unfortunately, removing the XML tags is not a option. We need them to repurpose the content after it goes to press.
This is a real bug, and for us it's a serious one. I'm surprised it hasn't come up before. Is there any way to draw this to Adobe's attention? I'd be more than happy to share any of these files if that would help.
Steve

Export Media in Premiere Pro CS6 ONLY produces an Audio File in Media Encoder

First, all the system info:
Windows 7 Home Premium Service Pack 1
Intel HD Graphics 3000 Display Adapter
I’m using Premiere Pro CS6 Version 6.0.5 (001 (MC: 264587)) “Mighty Kilt”
Version 6.0.3.1 (64 Bit) of Adobe Media Encoder CS6
Other Adobe applications installed: AIR, Creative Cloud, Download Assistant, Encore CS6 Library, Flash Player 12 ActiveX, Flash Player 12 Plugin, Help Manager, Premiere Pro CS6, Premiere Pro CS6 Functional Content, Reader XI
I’ve run check for updates on both Premiere Pro and Media Encoder and everything is up to date
I'm producing a two disc, dual layer DVD set for 100 families of my son's marching band.
I have a half hour "masterwork" of interviews, performance segments, rehearsal sequences, credits, etc that I've edited together complete with sound, etc.
I also then have various other video segments from the season, some high quality (1920x1080) and some lower quality.
Rather than import everything into Encore and have Encore transcode them all at the same quality, I wanted to ensure that the half-hour piece and certain other segments were transcoded as high quality as possible and given the largest file sizes I could and then transcode other segments at lower quality levels as needed so everything would fit on the discs.
The company I'm using to duplicate/replicate the 100 DVDs from my Master DVD advised me to encode them FIRST in Premiere Pro as desired, and THEN import those files into Encore.
I've used Adobe Media Encoder a lot to export the individual segments into files I could upload to Youtube and have had no problem for the last several months.
But now, two things happen:
1) AME automatically designates the "Output File" with an .aac extension (see attached)
2) When I do an "Import As" of the AME encoded file in Encore it only loads an audio file (obviously)
Huh?
Here are the settings I use in my Export Media dialogue in Premiere Pro CS6:
Format: MPEG2-DVD
Preset: NTSC Widescreen High Quality
Output Name (and filetype): ______ name with Save as Type of "Video Files(*.mpg)
BOTH the "Export Video" and "Export Audio" boxes are checked (see attached screen print)
Filters Tab: left as is, don't do anything here
Multiplexer Tab:
choose the "DVD" button (vs the "None" button)
Bitrate Type: left as Variable which is what is selected as a default
Video Tab:
Codec: Reads MainConcept MPEG Video
Quality: increase it to the max of 5
TV Standard: NTSC
Frame Rate: 29.97
Field Order: None (Progressive)
Pixel Aspect Ration: Widescreen 16:9
Render at Maximum Depth box checked
Bitrate Encoding: I choose CBR for my high quality segments and VBR 2-pass for my lower quality segments
Bitrate: kick it up to the max for high qulaity segments, adjust as needed to get the filesize I want for my lower quality segments
Audio Tab:
Audio Format: Dolby Digital
Codec: Dolby Digital
Bitrate: At least 320, sometimes higher for the segments I want to be the highest quality
I check the "Use Maximum Render Quality" box
I chose "Queue" for everything and then let it run overnight
And yes, the original media has BOTH a video track and an audio track that works (see Screenprint)
So... what am I doing wrong, helpful experts????

Larry, Mark, Jim & Bill -
It is 1 am Tuesday morning and I'd do a primal scream if my family weren't all sleeping upstairs.
Somewhere along the way, I either read or was given the advice to just skip AME, load my videos as timelines in Encore, and just do the transcoding there.
I spent almost a day trying to figure out how to get "buttons" for my menus I was building (they weren't appearing in Encore's library like they should) and eventually found a simply workaround.
So I then spent the last 24 hours or so building all my menus, creating small clips for my "motion menu" buttons, getting all that straightened away.
Got really excited earlier tonight since it seemed like I was nearly finished and coming down the home stretch.
I hit "build" in Encore, went away for a couple hours, and came back to find a big error message awaiting me telling me that "Encoding Failed."
I have read a lot of posts, and the outlook is not good, or at least the possible solution not simple or short from a time perspective.
I have a 100 families awaiting their DVD they've paid for that they initially were told they'd have by mid-February. I've been telling everybody that they would have it - guaranteed - by this weekend when there's a band festival that would be ideal for distribution. The DVD duplication company says they have to have it by Wed morning at the absolute latest. Meaning I've got about 24 hours to figure this out and burn my dual-layer masters of the two DVDs or once again tell people "I know I guaranteed you'd have it by this weekend, but I don't have it ready yet."
Almost as importantly, I can't afford to keep spending the hours and hours and hours on this that I have. It's impacting my personal and professional life.
Thus the primal scream.
The posts I read about the encoding failure all pretty much advise that I use AME to do all the transcoding work. Which of course brings me squarely back to my original problem: I cannot get a video file out of AME.
I'm embedding a screenshot of what I see when I click on the pull-down menu in the AME dialogue window. The problem: there is no MPEG2-DVD option listed to be chosen.
Although I'm relatively new to forums, I've read enough posts by now that it seems like most people are in crisis mode when they post. So I realize my situation is not all that unique. But from a newbie rookie in the field to you experts, I REALLY could use some assistance right now, because between this and the long, cold winter we've had, I'm about to lose it. :-)
P.S. Mark, in answer to your question about frame rates, I have 18 different videos/films/projects that I'm including in my two DVD-set. There have probably been nearly 6-7 different cameras that have contributed footage to one or more of those films by borrowing camcorders of different brands and types and quality levels from people. Nearly every one of those 18 films have multi-camera sequences in them. And many films are collections of sequences which themselves are "nested sequences" sometimes three deep. In otherwords, there is no way I can tell you all the various frame rates that may be represented among these 18 separate projects and I certainly can't go back and hope to change them all to the same one.
Help. Please. :-)

Premiere Pro CC crashes when trying to Export Media

I really hope someone can help me with this.
I bought a brand new Dell XPS 15 because I will be studying multimedia production next year. Next week I'm registering for the art school and I'll be able to buy a CC student license. I installed the Creative Cloud Trial Version because I couldn't wait to check out the new features in Photoshop and Premiere Pro. However after working on a Premiere Pro project for several hours, the program crashed when trying the Export>Media function.
As soon as I hit Export>Media in every project I make in Premiere Pro, the following dialog box pops up: "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.". I'm not able to export my project, not even by using the keyboard shortcut Ctrl+M.
I already tried reinstalling Creative Cloud, without any luck. Any idea what could be causing this? I really need this fixed before school starts, so help is much appreciated.
Here are my system specs:
- Intel Core i7-4712HQ processor
- 16GB DDR3L RAM
- Nvidia GeForce GT750M 2GB
- 500GB SSD
Thanks to everyone willing to take a look at my problem.

Hi John,
Thanks for your response. I checked all those links but I'm afraid none of those solves my problem. My GPU drivers are up to date and changing BIOS settings to fixed to disable Nvidia Optimus doesn't work as well.
I checked Windows Event Viewer and the error shows as following:
EventData
Adobe Premiere Pro.exe
8.0.0.169
536f4f89
MSVCR110.dll
11.0.51106.1
5098826e
c0000409
00000000000740c4
21b4
01cf994108252059
C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
C:\Windows\SYSTEM32\MSVCR110.dll
a2ad4021-0534-11e4-8260-e82aea8638f9

Stage 4 Multiplexing - Media error in Power calibration 0x73,0x03

Try to burn a DVD the project I made. Everything is fine until it goes to stage 4 Multiplexing & Burning - the system shows a Media Error in the Power Calibration 0x73,0x03 when this come up it will eject the dvd. I never had a problem like this. System always worked fine. Any help on this? Thank you, John

Hi
As I remember it - it used to be when using Cheap Brands of DVDs e.g. Memorex or NoName ec.
Else
Multiplexing Error
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Premiere Pro CC hanging on export media

Hello,
I've a project shot on P2 cards with a couple of MP3 audio tracks. Never been a problem before. Went to export media (Queue to Media Encoder) and as it's processing the request the application stops responding. (also realized at this time the auto-save wasn't so I lost 2hrs work)
After recreating and saving - same issue - hang on export media
Updated to Premiere Pro CC 2014 - managed to get to Media Encoder and then it failed with an unspecified H.264 error (I'm trying to save to the H.264 YouTube 720p 29.97 compression) When I tried again, it hung up on the export process as originally happening.
Trashed preferences (of both versions of PPCC) - tried again - same results
Removed MP3s and tried again - same results
Went back to Premiere Pro CC and opened another project shot with a Canon 7D and was able to export media.
I've done at least ten projects with my Panasonic Camera's and the P2 workflow in Premiere Pro CC and have not had any problems.
Any suggestions on how to troubleshoot further would be greatly appreciated.
Mark
MacPro

OK, So to be more specific it's hanging when I send it to Media Encoder Queue. I was just able to just do a direct export.
I found the article on permissions and that was not the issue.
I've made no changes to hardware and have done three projects with the same codecs, type footage, duration (1 hour range) with no problems.

"Missing media" error trying to share new trailer

My daughter is using iMovie for the first time on a new Macbook Air running OS X Mavericks 10.9.1 and iMovie 10.0.1. She imported the video clips from her iTouch to her iMovie library and used some of those to create a Trailer. She used the default music from the trailer template and only the video clips she imported from the iTouch to the Air's local hard drive. In "Library" view the trailer is visible and looks fine.
However, trying to share or export the movie in any form (Theater, Email, Quicktime) generates the following error message, "[TRAILER NAME]" has missing media. If you click Continue, your project will be exported without these clips." The one time I tried to export it looked like only the first video clip she used was converting - the entire rest of the trailer was gone...but it's still working in Library view.
I cannot figure out the source of this problem, nor can I discover the answer in the forums. (I can't even see which media the app says are missing??) I've seen advice on delete/reinstall but was concerned that the trailer might vanish if I exit the app.
Thanks in advance for any assistance on a fix.
Thanks,
Brian

Yes -- when I wrote "in library view" it referred to within the iMovie app, where you toggle between "Library" and "Theater".
OK, so I found the Movies folder and the iMovie library folder inside -- thank you. The "original media" sub-folder seems to contain all 50-odd .mov files that were imported from the iTouch (though, curiously, about half show the deafult QT thumbnail icon - playing any of those replaces it with an image).
The folder also contains a subfolder with the name of her project; in that there is a single file called "CurrentVersion.imovieevent" that I assume is what the app is playing in the library/project view. But no other clues as to why the Share contines to return the missing media error...
To make matters more complicated, she subsequently created a second Trailor and that all seems to be working perfectly. I have no idea what's different about the newer project, but maybe just the first (and, imho, much better) trailor isn't going to work...beginner's (bad) luck? :::sigh:::

Premier Pro locks up intermittently when trying to export media files

Running Creative Suite 6 Production Premium Win ESD on Windows 7. Premier Pro locks up intermittently when trying to export media files. We have updated all Adobe and Windows software. Error message says PP has encountered a problem and will close. Can anyone help?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Export media issue - Premiere Pro CS4

Using the file>export>media. I want to bounce my whole project down to AVI and Im getting errors from Media Encoder CS4. See below.........
- Source File: C:\DOCUME~1\KYLEFO~1\LOCALS~1\Temp\HLC final1_2.prproj
- Output File: C:\Documents and Settings\Kyle Fowler\My Documents\HLC pics and clips\Sequence 01.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:18:44
8/9/2009 2:57:15 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
I got the same type of error from attempting an audio only export. I just upgraded from CS3. This project was crated in CS3, then converted to CS4. No other issues with the upgrades. My only guess is that converting the session from a CS3 to CS4 is the causing this. Can someone please help?
Thanks in advance.

Thanks for those details. I just noticed that all the avi and wavs are still located in the CS3 folder from the previous installation. Could that be the hitch?
This project was created in CS3, then converted 2 days ago into a CS4 project. There was some wierdness on a few things after conversion, but nothing out of the ordinary and CS4 is running like a champ on my system until I attempted to do this bounce. I am new to Premiere, so I may be missing something as simple as updating filepaths, etc.?
Yes, MP3 is terrible. I have the v.o. in wav. Honestly, I didnt notice the music track was in MP3 until gathering project specs for this. I was planning on replacing that for the final export. Im using a 3rd party sidechain VST for the ducking in PPro.....Sidekick 4.1: http://www.twistedlemon.nl/site/
It requires tht you run two instances of the plugin on seperate stereo tracks (still need to deal with the vo track having to be in stereo for now).
Thanks for your help.
AVI details:
File Path: C:\Documents and Settings\Kyle Fowler\Kyle Fowler's Documents\Adobe\Premiere Pro\3.0\TAPE 1.avi
Type: AVI Movie
File Size: 12.1 GB
Image Size: 720 x 480
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;57;02;20
Average Data Rate: 3.6 MB / second
Pixel Aspect Ratio: 0.9091
AVI File details:
Timecode:
Reel name: Untitled Tape
User Timecode: 08;06;40;11
Reel name: Untitled Tape
Contains 1 video track(s) and 1 audio track(s).
Interleave: 1 : 28.99
Video track 1:
Size is 11.46G bytes (average frame = 123.44K bytes)
There are 102576 keyframes.
Frame rate is 29.97 fps
Frame size is 720 x 480
Depth is 24 bits.
T
Audio track 1:
Size is 626.70M bytes
Rate is 48000 samples/sec
Sample size is 16 bits
Preset info:
For editing AVCHD Formats recorded in anamorphic 1920x1080 (ex.1440x1080).
16:9 interlaced HD video at 25 frames per second.
48kHz audio.
General
Editing mode: AVCHD 1080i anamorphic
Timebase: 25.00fps
Video Settings
Frame size: 1440h 1080v (1.3333)
Frame rate: 25.00 frames/second
Pixel Aspect Ratio: HD Anamorphic 1080 (1.333)
Fields: Upper Field First
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 3
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0

Why can't I render or export media all of a sudden in Premier Pro CS5?

I just had my computer serviced and now when I try to export media in Premier Pro CS5 I get an error "encoding failed: unk
nown error" and I cannot render either. There are other problems with my other Adobe programs too such as in Encore when I try to build my DVD I get the "unable to transcode" error. It almost seems like they somehow deleted some of my Adobe components. Everything worked fine before I took the computer in, I was just running out of space on my hard drive. Can I just re-install the entire CS5, or is that even neccessary? I am using Windows Vista Ultimate Service Pack 2 with and Intel Quad Core processor w/ 8GB ram and a 64bit operating system.
Thanks for your help!!!

I was just running out of space on my hard drive.
And the servicing included a new one, tranjsferring the install via a system image? This is bound to cause problems, since the drive mapping won't match. Not just with Adobe products, but also otehr programs and Windows itself. Indeed a clean reinstall of everything is strongly advisable... In your case it has definitely bombed out the licensing info, hence you are unable to use anything related to MPEG or other formats that use CoDecs tied in with the activation...
Mylenium

Selection Contains no media Error?

When exporting using Compressor from a time line in FCP I get a "selection contains no media" error.
Any suggestions?
Charles

Your IN and OUT points are not set for in the sequence. Use your UP arrow to get to the start of the sequence and use 'I' to inset your IN and go to the end of sequence and mark with 'O'. All should be fine now with compressor.

EXPORT XFA error while writing XFA files

Hello Experts,
We are facing an error while exporting to PDF from BEx report.
We are on EP7 SP14. BI on SP16.
After the report is displayed and Export to PDF button is clicked, a new window opens which shows following:
1. Error:
Message: No message was provided.
Stack trace: java.lang.NullPointerException
at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Message: EXPORT XFA error while writing XFA files
Stack trace: com.sap.ip.bi.base.exception.BIBaseRuntimeException: EXPORT XFA error while writing XFA files
at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:311)
at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NullPointerException
at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
2. Message:
No metadata is available for "DISABLE_NAVIGATION":
<parameterList>
<param name="BI_COMMAND_TYPE" value="OPEN_DIALOG_DISABLE_NAVIGATION"/>
<param name="TARGET_DIALOG_REF" value="DISABLE_NAVIGATION"/>
</parameterList>
In this window, complete screen of report is displayed as an image instead of PDF.
Please let me know if anybody faced similar issue earlier.
It was working perfect earlier, but suddenly error started.
regards
Kedar Kulkarni

No proper findings, but issue resolved.
Problem i found that we got a domain change and service values were not refreshed until we apply new patch.
So when we applied patch level 6 on BI WEBAPP& BI BASE S URL for ADS got refreshed and we faced the issue.
After resetting the URL to new domain problem got resolved.
Regards
Kedar Kulkarni

Export Media error

Similar Messages

Maybe you are looking for