Export message trace results in EOP?
We are using EOP and if I run a message trace for the last hour or so, I can only seem to view the results in the browser. I do not see an option to save this report, only if it is older than 7 days. Is this possible?
Hello,
there is one way of getting this information.
connecting EOP using Powershell from your system and use message trace to get the logs.
Hope the following like useful for this,
http://www.msexchange.org/kbase/ExchangeServerTips/MicrosoftOffice365/ExchangeOnline/retrieve-message-tracking-logs-exchange-online-and-eop.html
Thanks and Regards,
Dhandapani.
Similar Messages
-
Trying to export my forms results to excel error message is adobe can not save as the file is open
trying to export my forms results to excel, error message is adobe cn not save as the file is open in another location, however, no other file is open.
Thanks for continuing the help, but it is a medical realted form and I will just keep it confidential at this time.
Larry Lakes, Executive Director
The HANDLE Institute
[email protected]
541-639-1588
P. O. Box 6264
Bend, OR 97708 -
Export PCUI search result to Excel over Context Menu / right mousebutton
Hello
I am using CRM 5.0 and PCUI
I want to export the search result into Excel, on Servicetickets (BUS2000116). When i press the right mousebutton on the searchresult, I get the option Export to Microsoft Excel.
When i choose this option, Excel opens and i get the error message "Unable to open ......./mainDH.do. The Internet site reports that a connection was established but the data is not available."
and the cell A1 says ExternalData_1.
In Thread Export PCUI search result to Excel, Manuel Rodriguez told "Standard Export to excel is avaible in PCUI 5.0 and dont works in PCUI 4.0.". But I still can't make it work.
Anybody an Idea how I can do it work ???
Best regards
ThomasHi Thomas,
you should not use the right click and Export to Excel. I think this is a functionality of Internet Explorer for HTML Tabes. Using that functionality you will only get the actual table exported. Do you see the Button "Download" in the Toolbar? That's the export to Excel functionality introduced in CRM 5.0.
Regards
Gregor -
It says Message Trace data is stored for 90 days here: http://technet.microsoft.com/library/jj723162(v=exchg.150).aspx
When running the MessageTrace report using the Office 365 Reporting Web Service it only returns the past
7 days, even though it says up to 30 days here: http://msdn.microsoft.com/en-us/library/office/jj984335(v=office.15).aspx.
PowerShell’s "Get-MessageTrace" cmdlet only returns the past 7 days as well. PowerShell also has
an alternative cmdlet called "Start-HistoricalSearch" which returns the MessageTrace results between 7 and 90 days old.
Is it supposed to return 30 days, or is the documentation wrong, or is their an alternative report (like
PowerShell) to get MessageTrace results for over 7 days using the Office 365 Reporting Web Service?
Note: I'm aware that the results are returned in batches of 2000 MessageTrace results.That document is pretty old last modified March 2013 so I would say it's out of date. The reporting services are still pretty new in the current release I believe 7 days is limit for the Rest Endpoint and the Get-MessageTrace cmdlet (which is what
the more recent documentation around message tracking say) there is no REST endpoint for Start-HistoricalSearch you can see all the current endpoints by looking at the Metadata via
https://reports.office365.com/ecp/reportingwebservice/reporting.svc/$metadata
These services are evolving so new features and reports are added which is explained in
http://msdn.microsoft.com/EN-US/library/office/jj984346(v=office.15).aspx . But there is no public information on Timeframes and what reports and features are going to be added in future updates (that I know of). If you need data older then
7 days then Automating the HistoricalSearch cmdlets would be the way to do it for now.
Cheers
Glen
-
How do you export messages from Ovi Suite?
As the title says, how do you export messages from Ovi Suite?
I know how to export messages from Nokia PC Suite, but it doesn't seem to be possible in the new Nokia Ovi Suite.
Here is how I would do it in the Nokia PC Suite.
1. I click the Messages icon to open Nokia Communication Center.
2. I click on the Messages option on the left pane to view only messages.
3. In the main window I mark the messages I want to export.
4. Then I go to File menu and chose Export.
5. Choose destination folder and I'm all set to export my messages from my Nokia.
I can chose between the formats CSV and VMG (vMessage) for export. If more than one message is marked only the CSV format is available. But what you can do to export several messages in the VMG format is to mark them all in the main window and press CTRL+C or right click and chose Copy to copy them all to RAM memory. Then all you have to do is create an empty folder on the desktop and paste them in there by pressing CTRL+V or right clicking and chosing Paste.
That's all there is to it, using Nokia PC Suite. So how do you do this in Nokia Ovi Suite? You don't, right?
And this **bleep** Ovi Suite is supposed to replace PC Suite?
Thank God I won't be needing neither of them much longer. I am switching to Android and HTC. Good luck with Ovi, the Ovi Player, the Ovi Suite, the PC Suite, the Symbian, the S60, the Symbian^1 (S60 5th edition), the Symbian^3, the Symbian^4 and what not.I believe OVI took a step in the right direction with this option. I also believe it was made available due to the fact that OVI Suite cannot take a huge number of messages altogether. This option was made available so that the messages could be backed up.
However, I'd like to suggest the following, if possible.
1. Make Nokia OVI Suite be able to handle a huge number of messages.
2. Have the option to export only selected messages.
Nokia 701 Dark Steel on Belle FP2 -
How to export message body and data from Table to Excel from outlook 2010
I usually get Employee announcement in emails and I need to compile excel sheet from all these emails to know change in status of employee from previous line to current line .
Dear Concerned,
The change in status of the following employee has been carried out as per following details:
New Status
Change in Job
Effective Date
01-Feb-2015
Employee Name
Ricky ponting
Employee Code
4982
Designation
Sourcing Executive (Secondment)
Job Group
1A
Department
Sourcing & Supply Chain
Unit
Technology Sourcing
Division
Finance
Location
sydney
Reporting Line
Mr Micheal king
Note: Ricky Ponting was previously working as
Tariff Implementation Support Officer XYZ organization was reporting to
Mr Robin Sing
I need working code that export about HTML table data as well last Note : full line so that I can have an excel file of 2000 Employees whoes status have been changed and I can easily sort out from which previous line they were reporting to new line and I
can get in touch with the new line for any Access rights re-authorization exercise on later stage .
Currently i am using following code thats working fine with the table extraction but NOTE: line is not being fetched with the following code based on following URL
https://techniclee.wordpress.com/2011/10/29/exporting-outlook-messages-to-excel/
Const MACRO_NAME = "Export Messages to Excel (Rev Sajjad)"
Private Sub ExportMessagesToExcel()
Dim olkFld As Outlook.MAPIFolder, _
olkMsg As Outlook.MailItem, _
excApp As Object, _
excWkb As Object, _
excWks As Object, _
arrCel As Variant, _
varCel As Variant, _
lngRow As Long, _
intPtr As Integer, _
intVer As Integer
Set olkFld = Session.PickFolder
If TypeName(olkFld) = "Nothing" Then
MsgBox "You did not select a folder. Operation cancelled.", vbCritical + vbOKOnly, MACRO_NAME
Else
intVer = GetOutlookVersion()
Set excApp = CreateObject("Excel.Application")
Set excWkb = excApp.Workbooks.Add
Set excWks = excWkb.Worksheets(1)
excApp.Visible = True
With excWks
.Cells(1, 1) = "Subject"
.Cells(1, 2) = "Received"
.Cells(1, 3) = "Sender"
.Cells(1, 4) = "New Status"
.Cells(1, 5) = "Effective Date"
.Cells(1, 6) = "Employee Name"
.Cells(1, 7) = "Employee Code"
.Cells(1, 8) = "Designation"
.Cells(1, 9) = "Job Group"
.Cells(1, 10) = "Department"
.Cells(1, 11) = "Unit"
.Cells(1, 12) = "Division"
.Cells(1, 13) = "Location"
.Cells(1, 14) = "Reporting Line"
.Cells(1, 15) = "Note:"
End With
lngRow = 2
For Each olkMsg In olkFld.Items
excWks.Cells(lngRow, 1) = olkMsg.Subject
excWks.Cells(lngRow, 2) = olkMsg.ReceivedTime
excWks.Cells(lngRow, 3) = GetSMTPAddress(olkMsg, intVer)
For intPtr = LBound(arrCel) To UBound(arrCel)
Select Case Trim(arrCel(intPtr))
Case "New Status"
excWks.Cells(lngRow, 4) = arrCel(intPtr + 1)
Case "Effective Date"
excWks.Cells(lngRow, 5) = arrCel(intPtr + 1)
Case "Employee Name"
excWks.Cells(lngRow, 6) = arrCel(intPtr + 1)
Case "Employee Code"
excWks.Cells(lngRow, 7) = arrCel(intPtr + 1)
Case "Designation"
excWks.Cells(lngRow, 8) = arrCel(intPtr + 1)
Case "Job Group"
excWks.Cells(lngRow, 9) = arrCel(intPtr + 1)
Case "Department"
excWks.Cells(lngRow, 10) = arrCel(intPtr + 1)
Case "Unit"
excWks.Cells(lngRow, 11) = arrCel(intPtr + 1)
Case "Division"
excWks.Cells(lngRow, 12) = arrCel(intPtr + 1)
Case "Location"
excWks.Cells(lngRow, 13) = arrCel(intPtr + 1)
Case "Reporting Line"
excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
Case "Note:"
excWks.Cells(lngRow, 14) = arrCel(intPtr + 1)
End Select
Next
lngRow = lngRow + 1
Next
excWks.Columns("A:W").AutoFit
excApp.Visible = True
Set excWks = Nothing
Set excWkb = Nothing
Set excApp = Nothing
End If
Set olkFld = Nothing
End Sub
Private Function GetSMTPAddress(Item As Outlook.MailItem, intOutlookVersion As Integer) As String
Dim olkSnd As Outlook.AddressEntry, olkEnt As Object
On Error Resume Next
Select Case intOutlookVersion
Case Is < 14
If Item.SenderEmailType = "EX" Then
GetSMTPAddress = SMTP2007(Item)
Else
GetSMTPAddress = Item.SenderEmailAddress
End If
Case Else
Set olkSnd = Item.Sender
If olkSnd.AddressEntryUserType = olExchangeUserAddressEntry Then
Set olkEnt = olkSnd.GetExchangeUser
GetSMTPAddress = olkEnt.PrimarySmtpAddress
Else
GetSMTPAddress = Item.SenderEmailAddress
End If
End Select
On Error GoTo 0
Set olkPrp = Nothing
Set olkSnd = Nothing
Set olkEnt = Nothing
End Function
Function GetOutlookVersion() As Integer
Dim arrVer As Variant
arrVer = Split(Outlook.Version, ".")
GetOutlookVersion = arrVer(0)
End Function
Function SMTP2007(olkMsg As Outlook.MailItem) As String
Dim olkPA As Outlook.PropertyAccessor
On Error Resume Next
Set olkPA = olkMsg.PropertyAccessor
SMTP2007 = olkPA.GetProperty("http://schemas.microsoft.com/mapi/proptag/0x5D01001E")
On Error GoTo 0
Set olkPA = Nothing
End Function
Sub DebugLabels()
Dim olkMsg As Outlook.MailItem, objFSO As Object, objFil As Object, strBuf As String, strPth As String, arrCel As Variant, intPtr As Integer
strPth = Environ("USERPROFILE") & "\Documents\Debugging.txt"
Set olkMsg = Application.ActiveExplorer.Selection(1)
arrCel = Split(GetCells(olkMsg.HTMLBody), Chr(255))
For intPtr = LBound(arrCel) To UBound(arrCel)
strBuf = strBuf & StrZero(intPtr, 2) & vbTab & "*" & arrCel(intPtr) & "*" & vbCrLf
Next
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFil = objFSO.CreateTextFile(strPth)
objFil.Write strBuf
objFil.Close
Set olkMsg = Application.CreateItem(olMailItem)
With olkMsg
.Recipients.Add "[email protected]"
.Subject = "Debugging Info"
.BodyFormat = olFormatPlain
.Body = "The debugging info for the selected message is attached. Please click Send to send this message to David."
.Attachments.Add strPth
.Display
End With
Set olkMsg = Nothing
Set objFSO = Nothing
Set objFil = Nothing
End Sub
Function StrZero(varNumber, intLength)
Dim intItemLength
If IsNumeric(varNumber) Then
intItemLength = Len(CStr(Int(varNumber)))
If intItemLength < intLength Then
StrZero = String(intLength - intItemLength, "0") & varNumber
Else
StrZero = varNumber
End If
Else
StrZero = varNumber
End If
End FunctionDear Graham
I am already big fan of yours and using mail to many Addin from years from word 2007 to Word 2010 :) and still loving it and I use it for access re-authorization from Lines for application accesses . I tried and finally got understanding of the Extract to
mail Addin and after tweaking excel - Text To columns and other few things finally i was able to get the required data - from morning to now :) I am happy to see your provided guidance
Thanks alot - by the way why your Mail to many add-in is so slow now these days :) previous versions usually help me send 1000 emails in 10 minutes now it takes long time :) -
Cannot get Genius to work - Always get same error message - "Genius results can't be updated right now. The required file cannot be found." Problem also seems to be affecting iCloud aand Music Match. Can anyone help me with this? What file is missing and from where?
This is a known problem with Windows 7 Enterprise using certain Group Policy settings. Solution for me was to use another machine running Windows 7 Ultimate.
-
How to specify time Spans for Message Trace in wpf Application
I had been working on this report on Message trace in Office365. I would want to give filters for Startdate and enddate from my WPF(C#) application. How can i do that.
i tried the following. When i specify them directly in the URL. they work perfectly fine but when i try to give them from the code, thats where it says value cannot be null,Parameter name: Source. What could be the problem.
ub.Query="$filter=StartDate eq datetime'2015-01-01T00:00:00' and EndDate eq datetime'2015-01-07T23:59:59' &";
string fullRestURL = Uri.EscapeUriString(ub.Uri.ToString());
ub.Query = "$filter=StartDate%20eq%20datetime%272015-01-01T05:00:00%27%20and%20EndDate%20eq%20datetime%272015-01-11T06:00:00%27%20&";
string fullRestURL = Uri.EscapeUriString(ub.Uri.ToString());Hi HarshitaK,
This forum(WPF) is talk about how to use XAML technologies to productively create visually appealing and differentiating applications and to improve user experience.
I found your question is about MessageTrace report:
http://msdn.microsoft.com/EN-US/library/office/jj984335(v=office.15).aspx
The Exchange Server Development is a better place for Office365/Exchange development questions. I’ve moved it there for you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Export Messages from UC 2.1.2es20.1119-20
Is there a way to export message from UC 2.1 so that I can save them as .wav or similar format files and put them on media? I remember being able to do something similar using Unity 5 when it was integrated with Exchange, but I don't see any similar functionality in 2.1.
correct - 1.2 (Windows based) and 7.0(2) and later (Linux based) work with COBRAS - 2.x does not since it did not support super-user IMAP mailbox access which COBRAS uses to get messages out of mailboxes for users.
-
Outlook 2007 adobePDF addin export messages without czech special characters.
I would like to ask how to set codepage settings in Acrobat XI standard outlook 2007 adobePDF addin. When i export message adobePDF convert czech characters like "č, ř, š" to "c, r, s" and also change font.
Printing message with AdobePDF wokrs fine.
I can not find a way how to change codepage or font settings in Acrobat PDFmaker.
Thank You in advance -
Getting message : The result set for this selection was empty on sm20
Hi,
I assigned below parameters in rz10 :
rsau/user_selection 1
rsau/max_diskspace/per_day 1950M
rsau/max_diskspace/per_file 650M
rsau/enable 1
I activated security audit profile in sm19 also.But when iam going to sm20 for analysis of security audit log iam not getting report iam getting this message : The result set for this selection was empty.
Gudie me for the same.
ThankuHi,
The result set for this selection was empty.
I think your configuration is OK except one thing...
Check in SM19, if you have selected "Filter Active" check box in "Filter 1 and Filter 2" screen and Also "Audit Classess".
Even though security audit is enabled in SM19, without selecting filter it will not log the events and give you the above message.
Regards.
Rajesh Narkhede -
Change standard message 'No result found' of AB of overview page CRMCMP_CMG
Hi,
I have a requirement, that if not result is found in views table, of assignment blocks in overviw page. Then we see a stadard message 'No result found'
I want to show different messages in different assignment blocks.
One way is to handle at Do_output_result method of each view and display different messages in different views called in overview page. However i think this is not the best solution.
Kindly guide how to achive this result?
Where do i have to do the changes to get different message?
Kindly help!
Thanks
EktaHi,
maybe you can have a look at the Message Replacement Functionality by which you can replace a standard message everywhere by another custom message. But I don't know if it is possible to create different custom messages for the same standard message.
For the Message Replacement Functionality:
1. Go to sm34 and create new entry in view cluster BSPWDVC_MSGREPLS
2. Assign the new Profile you created to your business role, using the Function profile MSG_REPLACE
Kind regards,
Carl -
PC Suite: Exporting messages in Vista
Hello all,
I like to export my messages as CSV to my computer for reference.
I've used PC Suite before in XP, where exporting messages in PC Suite was no problem.
Now in Vista, I cannot export any messages, because the whole menu bar is simply gone. So no access to any "special" file operations. Not even with the latest Vista-compatible version of PC Suite (v 6.84.10.3).
The only way to do something with a message is right clicking on it, which gives you options such as open, delete, copy and paste. But no export of course.
Anyone out there with a solution?
It'd be greatly appreciated.Message Edited by radiance9 on 26-Sep-200709:40 PMyou can backup the sms to a .nbu file then use this tool to convert all sms files to html, txt, vmg or excel xls format (xls can then be saved as a .csv).
What's the law of the jungle? -
?how to export message data?
I'd like to export message data (e.g., To: From: Date: Subject:) from selected messages in a mailbox for use in a database, spreadsheet or text editing program. How can I do this?
Thanks
LeeHi Lee, not sure if this works in 10.6, but Export mailbox data to a tab-delimited text file Apps...
http://www.macosxhints.com/article.php?story=20020902091755147
Or vCard to LDIF/CSV Converter...
http://labs.brotherli.ch/vcfconvert/ -
Exporting Code Inspector Results in SAP 4.6C
We are trying to use Code Inspector on SAP R/3 4.6C system. After the inspection is created for a program, we would like to export it to a document (PDF or another format) that can be used for reporting/audit etc. However, we are unable to do this.
Is there any way / workaround to export the inspection results to a document?
thanks
-hemant
Edited by: Hemant Babtiwale on Aug 12, 2011 1:04 AMHello,
Not sure abt 4.6, but in ECC6, there is clear button of "AS LIST" (CTRLSHIFTF11) and then List>Export>File.
If you are using SLIN (extended prog check), use 'Display all changes' and then System>List>Save-->Local File.
Diwakar
Maybe you are looking for
-
ERROR java.sql.SQLException: ORA-01843: not a valid month
This page is working fine for English Language. Once we change preference Lanuage to "French Candian" We are getting this issue. This is little urgent on this. ERROR oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL e
-
Quicktime playback of .TOD files with Perian installed
I recently purchased a JVC GZHD3 camcorder, and have had no problems playing the .TOD files in quicktime until I installed Perian 0.5 which I got from the apple website. Why did does it now say, the movie could not be opened, the movie contains and i
-
No S.M.A.R.T. support on X79A-GD65?
Hello, I can not find any informations about enabling SMART on the X79A-GD65 mainboard. I can not use monitoring for SSD drive if I don't enable it. Thanks
-
Yesterday, in my test domain, I created the KDS root key using the Add-KdsRootKey –EffectiveTime ((get-date).addhours(-10)) command on a DC that is not the PDC Emulator because it was the server I was on at the time. Today, when I tried to create gM
-
Standard adobe form workflow error
Hey Expert, I am using the standard workflow template WS17900260 for any adobe form. In this task there is a task which is TS17900108. I have some workflow that end in error because of this task raising an exception "Exception CX_SY_NO_HANDLER trigge