Export MP3 form Final Cut?

Hi, Is it possible to export MP3 directly from Final Cut? Any third party plug-ins or suggestions? Thanks

I don't think so. I use Cleaner. You can use ITunes. Check out versiontracker.com. I'm sure there are some freeware/shareware utilities out there that will do it.

Similar Messages

Is it possible to export video from Final Cut X to DSR-PD175 mini DV camera

Hi,
Recently i buy on 27inch iMac with Final Cut Pro X installed.
Also I buy Thunder bolt to firewire adapter & firewire cable from Apple.
Now i am abel to capture my video from DSR-PD175 mini DV camera to FCP X.
How can i export video from Final Cut X to DSR-PD175 mini DV camera?
Please advise....
Thanks & Regds
Abin Thomas K.

II'm afraid not.
Not digitally anyway. Maybe by going to a monitor that has analoh AV output to the camera.
Probably Premiere. Or old FCP7.

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

SSign in to the App Store using the Apple ID that was used to purchase the software.

Exporting files from Final Cut Pro in Snow Leopard

I am using Final Cut Studio 2. I recently upgraded to Snow Leopard. Before the upgrade when I would export files from Final Cut the dialog box would automatically go to the last used folder location. Now, each time it goes to the system hard drive. Is there a way to fix this?
Thanks

Fix what?
Just choose the correct folder to which to export.

Can't Export Video from Final Cut Pro

After updated to OS Maverick, I can no longer export video from Final Cut Pro.
It pops up "The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
ANYONE CAN HELP??

10.0.2, I think this is where the problem is.
I will update to the latest (10.0.9) and update this thread to see if this will resolve my problem.

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

Command to Export project as Final Cut Pro XML from jsx script

Hi All,
Can somebody get me the command to export the project as final cut pro xml from jsx script.
I was using the extension builder script earlier for cs6 panel development, so we were using pjct.exportFinalCutProXML("pathname");
Now I am working for panel in Premiere CC so working on HTML 5 panel and qe dom scripting(.jsx).
In some jsx examples i got there is script to export sequence as final cut pro xml but cannot get the code for project export.
project.activeSequence.exportAsFinalCutProXML(entire_out_path);
Also please let me know if there are any kind of reference available about all the functions and properties in the pe dom scripting for premiere pro cc.
I am using premiere pro cc 7.1, windows 7, Eclipse Kepler.
Thanks in advance,
Anoop NR

When you reimport the exported project XML to FCP, do you get the full project or just the single bin/sequence? If you get the full project then it sounds like you need Premiere help, not FCP help ... have you tried asking on the Adobe forums? If you only get the single bin/sequence then it seems you might have inadvertently selected those prior to creating the project export. Try making sure that your FCP Browser window is active and that you have not selected anything within that window prior to using the File > Export > XML command. If that still causes issue then you might try using an earlier FCP XML version.
Hope it helps
Andy

Why they ask me get a compressor from App Store to export video from final cut since I use mavericks

How can I export video from final cut can't do again since I have got maverick

What happens when you have the project active in the timeline and press the Share button?

OMF won't export out of final cut pro.

Exporting a 93min 1920x1080 HD timeline to OMF
5 second handles tried 2 second handles as well.
OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
Final cut 6.0.6
Have deadline. Didn't see it on any forum. Help!! Thanks!!

Seems like a weird thing to not be able to do since it's called final cut PRO...
Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
Shane

How to up the DPI on exported images from Final Cut

Is there a way to export stills from Final Cut that are 300 DPI, I think they are exporting at 72 DPI?
Catherine

DPI is a measure of density of pixels. It tells us nothing about the printed size of the image (width in inches x height in inches)
A 1200 x 900 image @ 300 dpi yields a 4" x 3" image when printed.
That same size (in pixels) image printed at 100 dpi will yield a 12" x 9" print.
The number of picture elements (pixels) is exactly the same between the two prints but the one in 100dpi image are 3x larger - which will yield a softer image when viewed from the same distance as the 4"x3" 300dpi image.
However, if you view the 300dpi 4"x3" print from 2' away and view the 100dpi 12"x9" print from 6' away - they will appear the same.
Discussions of finding meaning in DPI is difficult without knowing how the final will be viewed.
fwiw - I've made poster size prints at 75 dpi that looked just fine when viewed from 10-12'.
x

Quicktime Export Components in Final Cut Server

Our company has purchased a number of Elgato h264 encoders and we're loving them. They reduce our h264 compression times on average from 15-20 mins down to 2-3 mins. It usually compresses our videos faster than real time. Which as a news organization is great for us. These encoders work great on all our Macbook Pros & Mac Pro systems. I've now installed one onto our final cut server and set up a custom compressor setting. Under the 'encoder' tab the file format had to be set to "Quicktime Export Components" instead of "Quicktime Movie" to use the Elgato. And it works great when I send a single file threw compressor. BUT I can't get this custom preset to show up or work inside Final Cut Server. I have other custom settings that do show up and work (but they are all "Quicktime Movie" file formats). I've rebooted multiple times and looked under multiple Responses transcode settings, but the new one I've created to use the Elgato never shows up.
Is it possible to use Quicktime Export Components in Final Cut Server?
I couldn't find any mention of this in the FCS admin manual or any other posts in the forums regarding this.

I have seen on MediaSilo.com a tip to get Elgato H.264 working with Compressor, but I can't seem to be able to find it. Basically, the trick was to create a duplicate setting in Compressor that Final Cut Server is able to read ( not as Quicktime Export Component), associate it with a Final Cut Server's compression setting and later reassign that setting in Compressor to Elgato.
I will keep diggin' for this tip, it was actually a screen recording.

Flash Video Exporter plugin for FInal Cut Pro

Does anybody know how to install the Flash Video Exporter
plugin for Final Cut Pro so it shows up as an option in FCP?
I want to create FLVs directly from FCP.
Thanks

http://www.adobe.com/devnet/flash/articles/flv_exporter_03.htm
Scroll Down - its about mid page
This is on the intro page:
Note: You must have Flash MX Professional 2004 installed on
your machine to use the Flash Video Exporter with your video
editing application. The only exception is using the exporter in
Demo Mode.

Export project from final cut pro to Avid

What are my options to create a workflow that implies doing my last trims on Avid (Adrenaline and Nitris?)
My idea is to create almost ended videos on Final cut Pro 5 by myself and expend a last day or two on an Avid Nitris to do the final touches, mixing audio and output the stuff...
the videos are industrial video and small budget commercials that requires more effects that Final Cut can offer me...
THANKS IN ADVANCE

First off, you'll need PRO EXPORT FCP>AVID from www.automaticduck.com.
Then you'll need to recapture all the footage used in the sequence into the Avid, since FCP and Avid capture media differently.
Shane

How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

Hi
I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
Here are the settings:
HD:
1 Video CODEC                 XDCAMHD50
2 Wrapper format           QuickTime Self-Contained
3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
4 GOP                                   Long GOP
                                             Closed GOP
5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
6 Movie version               UK Home Video Version
7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                          1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
2 Resolution                      1280 x 720
                                           1920 x 1080
3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
5 Chroma format              4:2:2
1 HD audio format           24 bits/sample 48 kHz sampling rate
2 Track layout                    Track 1 – 2.0 Stereo L mono
                                            Track 2 – 2.0 Stereo R mono
                                            Track 3 – L
                                            Track 4 – R
                                            Track 5 – C
                                            Track 6 - Low frequency effects LFE
                                            Track 7 – L Surround
                                            Track 8 – R Surround

First of all, what are your sequence settings? Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this). Do you have a surround sound mix?
You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs.
Do you understand about safe zones for graphics? If not, post back.
I don't see any option to set the GOP in xdcam in compressor. This may be built in to the xdcam format.
I don't see any option for 720 xdcam hd in compressor.
There are many other tools available for this kind of work, but they may be out of your price range. You might want to just find a facility with experience in deliverying this sort of thing.

16:9 Export trick from Final Cut Pro to iDVD

If this is posted, I have not seen it. I have spent years trying to get a decent photo quality video on my widescreen tv without peoples faces looking like 4 pixel blocks. I think I have found a pretty decent result.
This is for Photo Slide shows only. (If you are going to mix widescreen video with photos, you must have the video in the timeline before you change the sequence to Anamorphic.)
Create my widescreen project in Final Cut Pro
(Photos have already been custom cropped (16x9) and reduced to 960 px in height before importing. iPhoto does this easily)
Sequence settings in FCP: Use the default settings just check anamorphic. Also, best compressor for photos seems to be DVCPRO.
When project is ready to export, Export to Quicktime Movie
Setting: Custom (the Sequence Editor pops up)
In the Aspect Ratio drop menu select "HDTV 720p (16:9) This will change the aspect ratio to 1280x720. All other settings should match your sequence settings.
Export
Open the movie in QT Pro. Select the Video Track in the Movie Properties
Check Preserve Aspect Ratio
Change the Height to 480 (the width should automatically change to 853)
Close the movie and save changes.
(This step really does make photos clearer)
iDVD will read this as widescreen and create descent non pixelated SD quality on your Widescreen TV.
If you have a better way to do this, or can get better quality than this achieves, I would be interested to know.
Profe

Hey Mish.
I use 960 px because it is double the minimum 480. That allows me to use zoom animation or crop further without losing quality. I guess I would not have to go as high as 960 but its a number easy to remember.
As for your questions about my methods. I am one of those Final Cut Users that really does not understand how things work. I am just good at using it to create my movies. So what you say is Greek to me. Also, for some reason, I do not have Compressor application that so many people talk about in the forums. I just got so fed up with the crappy result I got with just exporting with the same settings as the sequence. The result was pitiful. If you think of a better result using different sequence or export settings, I'll try it.
I do a Highlights DVD project once a year. It's about 2 hours long (photos and video) and this method has given me the best ever result. It's my last year doing it so I don't want to invest in any software. My buddy would also tell me to use DVDSP and I've used it a couple of times but there is so much to it that I always forget what to do. So I have to "play nice" with iDVD
Profe

Export MP3 form Final Cut?

Similar Messages

Maybe you are looking for