Export multiple audio channel in same video file in premier pro

OK I have tried a lot and searched the net a lot a lot a lot, but unfortunately I didnt reach anywhere.
What I am trying to do here basically is that I have all my footage setup in premiere. In my Audio section I have included 4audio tracks (each for a specific language). How do I export this video so that 4 tracks are available, you know like tetra audio for a dvd.
I'm asked to do this in avi format, does the format matter or it has nothing to do with it.
Please save me!!!!!!!!!!!!!!

4 different exports, one for each language.
AVI is a container, not a specific format.

Similar Messages

Exporting multiple audio channels Final Cut 6

Does anyone know how to export multiple audio channels out of Final Cut Pro 6 from one quicktime export?

You want a multichannel QT, or AIFF files of the individual channels with one step?

Exporting multiple audio channels from Premiere Pro CS6 in MXF OP1a

I have a Premiere Pro project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. I make sure that none of the channels are muted.
Result:
The rendered file contains 8 channels as I want it to, but only the first two channels contains audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
Any ideas what I can do?
Thank you for your help!

Hey Guys,
I'm having problems exporting an 8 channel audio mxf for a broadcast client. The mix they want is as follows:
Track 01: Full Programme Mix L
Track 02: Full Programme Mix R
Track 03: International Sound L
Track 04: International Sound R
Track 05: Music and Effects L
Track 06: Music and Effects R
Track 07: VO Mono
Track 08: Interview Mono
I have setup the sequence following this video on vimeo and am fairly confident I have the sequence settings correct. https://vimeo.com/38501157
I also can export a multichannel mxf. But all my tracks are exported as mono and I am therefore not maintaining my L and R as set up in my sequence
The problem is on exporting that since Tracks 01 and 02 are bounced down to 1 + 2 it means that my Track 01 (Panned L) is getting bounced down onto my Track 02 aswell and thus it does not remain seperate. Has anyone delivered a similar format for a broadcaster and come across this problem with Premiere Pro and know a solution?
Any help would be much appreciated
Thanks
Eamonn

Help using multiple audio channels for one video

Hi,
I have a video file with 3 audio files (stereo (.wav), 5.1 surround (.AC3), and commentary (.wav).
I have placed these on the time line of the video track, but now I need to have buttons to target each of them from a menu. However, when is choose a buttons target, is doesn't give me the option of which audio channel to play (A1/A2/A3 etc).
Is this possible with just one track, or do I need 3 (each with a different audio file as A1)?
Hope you can help! cheers.
Tim

There is a tutorial on setting this up here;
http://www.kenstone.net/fcphomepage/dvd_languagenattress.html
BTW I would very strongly suggest to compress your WAV files to stereo AC3 files. It will reduce your overall bandwidth, and you will have a disc that will less problems in playing.
http://www.kenstone.net/fcphomepage/a_packwarmouth.html

How to normalize the audio channel of a video file?

Hi there
I have 100 quicktime movies.
All I want to do is to normalise the audio in them.
I understood that in the Volume correction I need to select - Equalize Volume Levels.
Is that it?
You can watch the movies without the sound boost in here
Also, How can I save the audio File into the quicktime without rendering the video again.
I don't want the video to be encoded again because the quality is really bad for some reason.
Even If I choose Animation codec which suppose to be good.
Isn't there a way of saving the new audio in the movie without encoding it all again?
Thanks
Guy

hello,
DDVideo QuickTime video converter gain can help you.it only copys and normalises the audio for your mov video without encoding again.
Operation Steps：
1.Run the programe.
2.Add you MOV video,
3.Select MOV format in ProfileSettings,
4.There is a "Video Codec" in Video parameter,Please select " copy "
5,Please tick "VolumeGain" box and adjust output target video volume From 75DB to 105DB
6.Select output files directory，
7.click "convert " button to convert video.
The programe also can convert your video to other video format.you need to change Video codec to realize encoding again.
url:http://daydayvideo.com/quicktime-video-converter.htm
Hope it helps you.

Multiple Projects Using the Same Video Files

I have just completed a video that has upwards of 500 clips of source video in a single Bin. Now, I want to create two new videos using some of the previously used video footage in addition to video from other projects completed a couple of years ago. A few questions:
For new Video #2 (using some of the video from the exisiting Bin)
1. Can I just create a new Sequence and use some of the previosly used video clips? Will this affect the exisiting movie (ie take the clips offline?)
For new Video #3 (using some of the video from the exisiting Bin and video footage from other previosly completed videos)
2. Do I copy and paste the video file into a new project? Will this affect any of the previously completed movies by taking clips offline, etc?
Any help / suggestions would be greatly appreciated.

1. Yes. Creating a new Sequence is the proper way to do it. It will not affect the existing movie. It will not affect the underlying clips and will not take the clips offline.
2. Import the previously completed video(s) into your current project. Create a new sequence. Build your new video using the clips from your existing bin plus the clips you import. It will not affect the existing movie or the existing clips. It will not take the clips offline.
FCE is a nondestructive editor. That means that basically nothing you do while editing a sequence affects the underlying files on your hard drive. All the edits & effects, etc. are contained in the FCE project file.

Export MXF with multiple audio channels for broadcast

Hi,
I work at a broadcast company as an editor. We always used FCP with the free sony xdcam plugin to export. This plugin seems to be one of the rare ways to export an MXF with 4 audio channels. I don't know exactly why we need to export it for broadcasting with 4 audio channels, but we do.
Since our workload has grown enormously the last few months and it will only become more we are optimizing our workflow. We also work with a lot of different endboards in After Effects and we made a nice template to work with. And since AE and Premiere can make a dynamic link we are considering changing from FCP to Premiere.
Now comes the question!: The only obstacle we could not find an answer to is exporting it with 4 audio channels as an MXF from Premiere CS5. Will there be some development on this level regarding CS6?
A solution to this should save us a lot of time!
Any help will be highly appreciated!
I also attached an example for the usual MXF files we export

I have the same problem. I have a project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. None of the channels are muted.
Result:
The rendered file contains 8 channels, but only the first two channels contains any audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
I don't understand your answer to wleoni75's question. Could you please help me further?

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

Hey Volks,
when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
im very thankful for any idea...

Hi Dast Media,
Have you resolve the multi channel export?
I have the same problem...(the export it's ok but i hear only the first two tracks)
i need to export a MXF file with 8 tracks, 6 stereo and 2 mono.
Thank you for help!

Can I export multiple folders at the same time, keeping the album structure

I'm exporting all of my photos from 2010 so far. Is there a way to export multiple folders at the same time, while keeping the existing album structure? It seems that when I try it, iPhoto exports them all to the same folder.
I really don't want to do this one album at a time, and here's why -
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.

Check out [iPhotoToDisk|http://www.iphototodisk.com/index.html]
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.
Why not upload to Walmart from iPhoto? Check out the first option here:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Add multiple scans to the same pdf file scan at time of scanning

Hello, HP Officejet Pro 6830 How do I get it to add multiple scans to the same pdf file? I need to scan multiple documents and have them all end up in one pdf. Some may be double-sided and it is fine if I have to scan them individually. At present it will only do one scan or a double-sided scan then it wants to save the scan and not ask if there are any more pages. The only option is to save or not. Thank you.

After your first scan you need to click the + sign at the 7 o'clock position.

HT202020 Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Oh, baby! This bad boy flies!! Here's what to expect:
I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
Haven't done anybprocessing yet, but i'm liking it!!
Jim

Multiple classes in the same source file

I'm not sure what this is called, having multiple classes in the same source file. At first I thought it ws called subclassing but then I googled it and found that subclasses are just derived classes. Here's an example of what I'm talking about.
public class A {
class B {
class C {
}So first of all, what is having multiple classes in the same source file called?
Secondly, what are the advantages/disadvantages of this?
Thirdly, can you have a class completely WITHIN a class (same source file but inside the class not outside) and what are the advantages/disadvantages of this?

Advantage: You can reduce the number of source files specialy when your secondry classes are used only in the public class of the file.
Disadvantage: Normaly it make things more clear if we have one-to-one correspondance of class and source files. This make things easy when you want to find the java file of a perticuler class file. Also If you later wanted to create a seperate public class with a same name as one of those secondry classes you got lots of changes to do.
You can avoid this by creating them as nested classes
ex:-
public class MyPublicClass{
private static class MyInnerClass{
}this way the inner class will create a class file with name "MyPublicClass$MyInnerClass.class" instead of just "MyInnerClass.class"
And also if you declare the inner class as public you can access them from out side

Am editing with red files in premier pro and when I export and then upload to youtube it is not showing as an hd video. can anyone help?

am editing with red files in premier pro and when I export and then upload to youtube it is not showing as an hd video. can anyone help?

Then it's probably YouTube - have you checked here to see that you're watching the hi res version? It could be that YouTube is choosing an easier version to display based on your internet connection.
You can see on this screenshot that although the video has up to 1080 specs, my connection is making YouTube show me the 360p version by default.

Scan multiple pages to the same computer file

How can I scan multiple pages to the same computer file on my HP Officejet Pro 8600 Plus? Currently it will only scan each page to a separate computer file. I scan one document and then when it asks if I want scan another page I say yes and scan it. However they still go to separate computer files.
Thanks!
This question was solved.
View Solution.

Thanks so much!

Export multiple audio channel in same video file in premier pro

Similar Messages

Maybe you are looking for