Export MXF D10-D30 files

Is it possible to export from within Final Cut Pro or with a separate application MXF D10-D30 files?
Here are some more specs we need to have in the MXF file:
- Codec: D10 -30 Mb/s 625/50 | SMPTE 356M-2001: "Type D10 Stream Specifications - MPEG-2 4:2:2P @ ML for 525/60 and 625/50"
- Pattern: OP1a
- Container: SMPTE 379M-2004: "Material Exchange Format (MXF) - MXF Generic Container" SMPTE 377M-2004: "Material Exchange Format (MXF) - File Format Specification"
There are more audio specs but you get the picture I guess you have enough info for now with this.
Many thanks,
Fernando

you can use MXF4QT Export
http://mxf4mac.com/mxf4qtexport
of course you can always see if they will accept a bulk standard IMX30 quicktime (which is the same thing in a QT wrapper)

Similar Messages

Why is Premiere getting an error when trying to export .MXF files?

Hello!
I have a video that I need to submit to DMDS and it must be a .mxf file. This is the first time I've ever had to export a .mxf so I am not too familiar with the type. I have been exporting every other type of file for years and never had an issue (H.264, quicktime, etc.). However, when I try exporting .mxf I get the generic rendering error which then stops the export.
The first time I tried, the video was down to 12 minutes left (after about 2 and a half hours) when I got the error.
The next time, it crashed right away with over 2 hours still remaining.
So it does not seem to be a corrupt clip because: A) I've been rendering this video out as other file types for rough previews, drafts, etc and it's worked fine and B) The 2 crash times were on opposite ends of the spectrum.
I am running an iMac with OSX 10.7.5, 3.06 Ghz Intel Core 2 Duo with 8GB ram...I am using Premiere Pro Version 6.0.0
I do have Third Party plug ins installed but have never had an issue exporting in the past, only with this .mxf file.
Thanks in advance for any and all help!

If you have GPU accelertation enabled in Premiere Pro, try switching to Software Only.
Are you queuing the job to AME or clicking "Export" in the Export Settings dialog (which encodes directly through Premiere)? Whichever path you're going down, try the other one.
I'd also keep an eye on your resource usage, especially RAM, while encoding in progress. With 8GB of RAM, I'd be surprised if that were the problem.
Lastly, if you're encoding through AME, then you might want to post on that product's forum: http://forums.adobe.com/community/ame

How do I successfully merge MXF and DV files in a sequence?

I have a Panasonic with a P2 card (and DV film). I have a reader. I have successfully transferred all the files to my computer, and imported them into PP6, no problem. My only issue is this: if I want to consolidate the MXF files with the camera's film (DV) files in the same sequence, I have issues.
If I make the sequence compatible for the MXF, the DV files are small-in-a-box size. If I make the sequence NTSC DV, the DV's are great, but the MXF frames are over the top huge (we're talking nose hairs and cropped head tops) I've played around a bit with some formats, but I keep getting the same problem.
I'm betting there's one in here that somebody already figured out that works for both file types in a sequence. Or...is it during export that the change might happen? Really would like to be able to use both media types in one sequence if possible. Is it? If I'm going to need to convert the files to say, .mov, am I going to lose enough quality to care about, or is that totally counter-productive. I downloaded a trial version of "Wondershare" as advertised on the internet as an MXF converter, but I tried it and it didn't seem to be able to work with the audio files (as they are separated in the MXF content folder)
Any input, much loved. (I tried exporting the MXF separately to an .mov and re-importing, but it didn't seem to help).

No idea if this will help with your problem, but there is a CS6 Issue/Bug MXF http://forums.adobe.com/thread/1074489
Also, mixing SD and HD means that something has to give... and if you want everything at SD resolution, you may want to look up "interpret footage" in the help file, to "force" the HD video into the SD screen size (note that I do not mix video types, so I really can't give detailed instructions)
Also, if you export the MXF it would need to be into an SD file, not just another HD file of a different type

Export MXF Op1a XDCAMHD with one stereo track?!

I need a MXF Op1a XDCAMHD with only one stereo track as a master file.
If i choose "stereo" in the export settings I always get two mono files.
I know, that it is not a standart in a MXF with XDCAM to use stereo, but
I know that there are some broadcaster out there who use such a file as master file.
Does anyone know how to create it? That would be very helpful.

That's right I checked the file in the VLC Player.
I exported an MXF IMX30 file and it worked with stereo file, in VLC as well!
I send the "stereo" MFX XDCAM to a broadcaster and he said it is not a MXF with a stereo track. So the same like I recognized after my export.
So it seems to be possible to export MXF's with stereo files, but not in XDCAM.
Does anyone use it? Or has a similar problem / workflow?!

CS6: Premiere exports MXF Op1a (mpeg based) but Media Encoder does not.

As a company we use several local machines with a full installation of CS6.
Premiere Pro exports in our broadcast format (MXF Op1a - mpeg based - Long GOP - 50Mb - Top Field First - etc...) still Media Encoder does not.
They we both installed in the same procedure, full installation of CS6. MXF presets are present on both directories (Premiere and Media Encoder).
ME simply doesn't recognize "any know exporters" even if I force a preset, when it comes to MXF.
We have to import every single video into Premiere to export as MXF. It's difficult to create an effective workflow this way.
Any thoughts on why is this happening?
NOTE:
- Updated twice all machines - first to 6.0.3, now to 6.0.5 = no result
- Copied presets from a working trial installation = no result
- Microsoft based OS core i7 with 12Gb RAM, 3Tb HD and Nvidia Quadro 4000
Regards, RicardoM

I've read a lot of suggestions towards similar issues. None worked.
- installed codec packs incluiding different mpeg variations = no result
- copied /common preset files from premiere to AME = no result
- copied and replaced the full directory of AME from another working AME (with MXF exporter) = no result
- re-installed CS6 = no result
- updated CS6 twice = no result
- added MXF Preset zip file available in the official Adobe support (although it refers to mac presets) = no matter... no result
I really don't know what else to do.
It's difficult to accept suggestions like "format c and start over" cause of the impact on the production room, so I really need more options other than the extreme ones...
Any ideia Jim Simon?
Thanks in advance!
BTW: Must add that in all processes above, MXF exporting was allways possible in Premiere, just not in AME.

Exporting .MXF

In FCP there was an XDCam export which exported directly wrapped as .MXF. Now I use FCP X and I wish to know if there is a way to do this directly from the app. What I am doing at the moment is to share to XDCam and then import the .mov file to FCP 7 and export it again as .MXF. This makes me loose a lot of time. Any suggestions please?

Hi Russ,
I don't have problems with importing. I only need to export .mxf files for a TV station. Guillaume T partially solved my problem because I can use the Sony Content browser exporter with XDCAM HD422 50 Mbits and 8 ch audio. However the TV station asked for 35 MBits 50i with 4 channel audio. And still, Content broweser won't work with that.
Russ I want to thank you for your help and I want to thank also Guillaume because now at least I know I can use content browser.

"Rough" GIF export from ActionScript 3 files impossible?

Hello,
I just upgraded from Flash CS3 to Flash CS5, and I've been playing with the various new features. However, I've just encountered an odd problem that I can't seem to find a solution to.
In the past, I've made animated GIFs in CS3 by exporting them with the "Smooth" box unchecked. This was really convenient for me because not only could I export crisp pixel bitmaps from Flash, but I could edit it in another program later. I was planning on making some GIF animations via this process with the aid of the bone tool in CS4 and 5.
When I tried exporting frames of of a figure created with the bone tool in CS5, however, I got images that were fuzzy and often had distorted colors. After some time, I realized that this was because in CS3, I had exported the images from ActionScript 2 files, while the bone tool only works in ActionScript 3 files.
Is it not possible to export "rough" GIFs from ActionScript 3 files, or is there a trick to doing that that I'm somehow missing?

I'm sorry for not making it clear in my initial post, but it doesn't matter whether I create an image using the bone tool or not -- any GIF image exported from an AS3 file always has an antialiased appearance, even when the Smooth box is unchecked.
To show you what I mean, here's a simple GIF image I exported from an AS2 file:
Notice that all of the lines are simple and pixellated, with no antialiasing at all. This is the kind of GIF I want to export from an AS3 file.
Now here's the exact same image I exported from an AS3 file, with the exact same export settings:
As you can see, all of the lines look smoothed, even though I made sure the Smooth box was unchecked.
Is there anything I can do to correct this problem?

Export to Excel – XLS file formatting

Hi,
I have created process that exports report to XLS file. I write XLS file using XML tags, supported by Excel, which allow me to format each cell (especially look and data type). Unfortunately I can’t force Excel to see cell as date-cell.
I’m getting from database date in YYYY-MM-DD format and I want the same in Excel. I can export it as string value, but I want Excel to see it as date – not string.
This code works fine:
<ss:Cell><ss:Data ss:Type="String">'||x.begin_date||'</ss:Data></ss:Cell>
but Excel see the cell as a string.
I want something like that:
<ss:Cell><ss:Data ss:Type="Date">'||x.prnm_short_name||'</ss:Data></ss:Cell>
but this one doesn’t work, as well as “DateTime” type.
Do you know how to solve this problem?
Regards,
Przemek
Edited by: Przemek on 2008-11-14 13:11

Here is a sample of how you can create a procedure from an EXCEL file.
1. create, format and save Excel file as an XML file
2. edit file to add" htp.p(' " tags to begining of each line and "')';" tags to the end of the lines
3. add standard header tags at start of file (see code below)
4. add standard end tags at end of file (see code below)
5. grant excute privileges as required
6. test procedure: from browser (http://.../apex/owner.excel_rpt in this case; you do not need to use apex to do this
- you might want to secure the procedure once you got it running by limiting it to run only from your app
CREATE OR REPLACE PROCEDURE excel_rpt (fname VARCHAR2 DEFAULT 'excel_rpt.xls')
IS
-- query to get data; can be used in CURSOR LOOOP to fill in report
CURSOR rpt_cur IS
SELECT PROGNAME, user_name, priv, dept
FROM test_data;
BEGIN
-- standard header to open file in EXCEL application -- REQUIRED
owa_util.mime_header( nvl(NULL,'application/octet'), FALSE );
htp.p('Content-Disposition: attachment; filename="' || fname || '"');
owa_util.http_header_close;
-- to get this, save your Excel file as XML, open in editor (I used Notepad++),
-- prepend "htp.p(' to all the line", postpend "');" to all lines
htp.p('<?xml version="1.0" encoding="UTF-8" standalone="yes"?>');
htp.p('<?mso-application progid="Word.Document"?> ');
htp.p('<w:wordDocument
xmlns:w="http://schemas.microsoft.com/office/word/2003/wordml"
xmlns:v="urn:schemas-microsoft-com:vml"
xmlns:w10="urn:schemas-microsoft-com:office:word"
xmlns:sl="http://schemas.microsoft.com/schemaLibrary/2003/core"
xmlns:aml="http://schemas.microsoft.com/aml/2001/core"
xmlns:wx="http://schemas.microsoft.com/office/word/2003/auxHint"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882"
xmlns:wsp="http://schemas.microsoft.com/office/word/2003/wordml/sp2"
xmlns:st1="urn:schemas-microsoft-com:office:smarttags"
w:macrosPresent="no"
w:embeddedObjPresent="no"
w:ocxPresent="no"
xml:space="preserve">');
htp.p('<w:ignoreElements w:val="http://schemas.microsoft.com/office/word/2003/wordml/sp2"/>');
htp.p('<o:SmartTagType o:namespaceuri="urn:schemas-microsoft-com:office:smarttags" o:name="PlaceType"/>');
-- : deleted FOR brevity
htp.p('</wx:sect>');
htp.p('</w:body>');
htp.p('</w:wordDocument>');
-- standard closing tags -- REQUIRED
HTMLDB_APPLICATION.g_unrecoverable_error := TRUE;
END excel_rpt;
GRANT EXECUTE ON excel_rpt TO PUBLIC;

Size of Infocube Export to a flat file (.CSV)

First off, I'm new to BW so I apologize if I use the wrong terminology. I was wondering if there was any way to estimate the size of a flat file infocube export. For example, if I look up all the associated DB tables for a cube, let's call it TESTCUBE, would the total size of those tables be about the size of the TESTCUBE export to a flat file. This assumes that the cube is not compressed in any way. So if the the total DB table size is 100 MB then is the flat file about 100 MB? If not, is there a way to estimate this.
Thanks!

Can't say for sure how all DBs that BW run on work, but with Oracle, space is consumed in blocks, not by rows/records.
Let's say you have a table where the average row width (record length) is 100 bytes. In a tablespace that has 8K blocks, in theory, you could fit 81 rows in the block.
However there is usually a certain amount of freespace left in a block when rows are added to accomodate subsequent inserts/updates. The BW tables I have looked at default this to 10%. So that means youe have over 800 bytes of the block that might not get filled. There are other things that can result in space being consumed, such as deletions that will leave dead space, and updates can cause a row to migrate to another block, etc. Also, space is allocated in chunks as a table grows, and you may add one row to a table that causes a 10MB chunk of storage to be allocated, but it is holding only 1 row.
So as you can begin to see. A flat export should require less space than the source table (unless you are using database table compression which could completely invalidate what I have said), but by how much depends on all the things I mentioned, and could change from day to day.
You could certainly use as a rough rule of thumb, that a flat file export will require the same space and you would be safe (except if you are using db compression).

How do I set up my drag and drop questionaire to export to a XML file?

How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and drop rank order response of 1,2,3,4.How do I set
up a XML file that receives the responses.I don't understand how to
do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment>

Use XML.sendAndLoad.
http://livedocs.macromedia.com/flash/8/main/00002879.html
You will need a server script to receive the XML structure
and it depends on
the server scripting language how you obtain that data. Then
you can either
populate a database or write to a static file or even email
the XML data
received from Flash.
For a basic example, I have two links I use for students in
my Flash
courses:
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLASP/Ex01/XMLASPEchoEx01_D oc.php
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLPHP/EX01/XMLPHPEchoEx01_D oc.php
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"kenpoian" <[email protected]> wrote in
message
news:e5i9hp$cs6$[email protected]..
How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and
drop rank order response of 1,2,3,4.How do I set up a XML
file that receives
the responses.I don't understand how to do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment>

How can i export a 24bit avi file from photoshop for mac?

how can i export a 24bit avi file from photoshop for mac? i have a client that specificly needs the files to be avi and in 24bit what are the settings that i need to use to export the video using photoshop on a mac?

Hello,
To make a 24-bit AVI file in Photoshop, go to File>Export>Render Video. Then, under File Options, choose AVI from the Quicktime Export drop-down menu. Click the Settings button. Click the Settings button in the AVI Settings window. Change Compression to None, and then choose "Millions of Colors" from the Depth drop-down under Compression.
The Millions of Colors option is for 24-bit video (8-bit R+G+B channels, 8x3=24). Millions of Colors+ is for 32-bit video (24-bit video plus an 8-bit alpha channel).
-Brett

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

OBIEE 11g - issue when export to a csv file

Hello,
I have an issue when I try to export to a csv file a report having numeric feild, when I export and open the file in notepad the trailing zeros to the right of decimal points do not show up. When export to another formats (such as excel, pdf) the trailing zeros appears correctly. e..g, 100.00 appears as 100, 100.50 appears as 100.5.
Do you know what can be done in order to have trailing zeros to the right of decimal points to appear in a csv?
Thanks

This is a bug see below.
Bug 13083479 : EXPORT DATA TO CSV FORMAT DOES NOT DOWNLOAD EXPANDED HIERARCHICAL COLUMNS
Proposed workaround : OBIEE 11.1.1.5: Pivot Table Report Export To Csv Does Not Include Hierarchical Data [ID 1382184.1]
Mark if answered.!
Thanks,
SVS

Export Table to flat file and upload to FTP server for external vendor

I have done some extensive searches on the forums and I think I have an idea but really need some help. Basically have a table that needs to be exported to a flat file and uploaded to a FTP server so that our vendor can get the data Monday-Saturday and automated by sysdate. This data is used to produce daily letters that go out to customers.
After doing some searching I came across the UTL_FILE package and reading more into this right now but I am not sure if it is what I should be using to create the file.
I am using TOAD right now and can see how to do it manually however really need the file to create itself and send automatically at 6 am Monday - Saturday with the date at the end of the file name making it a unique file for each day.
Thanks in advance for all of your help.

As Justin and others have mentioned I wrote [XUTL_FTP|http://www.chrispoole.co.uk/apps/xutlftp.htm] so you wont find it in the Oracle documentation. It's pure PL/SQL and uses UTL_TCP and implements an integrated PL/SQL FTP client / API. One of it's many overloaded procedures FTP's the contents of a refcursor straight to a FTP server of your choice, meaning no intervening file is required. Since it is pure PL/SQL, it is trivial to schedule using DBMS_JOB/DBMS_SCHEDULER.
Any questions just ask.
HTH Chris

How to fix CS6 from crashing when trying to save as/export as an .idml file?

Tried the old faithful of restarting etc and using a single page with not styles etc or anything really, the most basic file but everytime CS6 keeps crashing.
Any pointers on how to try and work around this?
Running CS6 on 10.9.4

After following this http://www.tech4pub.com/2012/10/10/indesign-tip-reset-preferences-to-improve-performance/
Indesign does not crash after exporting as a .idml file but can open the file without the following:
But when I exported an idml from CC I could open with no problem, hmmm.

Export MXF D10-D30 files

Similar Messages

Maybe you are looking for