Export of Java system failing
Hello,
I'm trying to do a system copy of our production PI system and create a new QA PI system. According to OSS note 585277, we are going to do the SAVLIB/RSTLIB method. That is working fine.
However, the first part of the note talks about doing the export of the java system using the SAPinst program. Our system is a NW 7.00 system, so we need to perform the export of the java side to get the SDM portion of the java engine. We are using the database-specific option as stated in the documentation, but during the export we are getting an error in the "Export from Java central instance" step. Looking at the sapinst.log file there is an error that says the following: FCO-00011 The step setSDMStandAloneMode with step key |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|5|0|NW_JAVA_Export_CI|ind|ind|ind|ind|3|0|setSDMStandAloneMode was executed with status ERROR .
The is the only log that is getting updated. The one other thing is that the system is up and running during the export of the java portion.
Has anyone every done this or seen this error or had any experience with this? Does the system need to be down in order to complete this?
Thanks,
Dale Dingmann
Hi,
To be sure the SDM is changing its state to standalone mode, could you execute the statements, below?
Under "/usr/sap/<SID>/JC<xx>/SDM/program"
StopServer.sh
sdm jstartup "mode=standalone"
StartServer.sh
At this stage, check the log output, on the screen. To set to to integrated state;
Under "/usr/sap/<SID>/JC<xx>/SDM/program"
StopServer.sh
sdm jstartup "mode=integrated"
StartServer.sh
Best regards,
Orkun Gedik
Similar Messages
-
Installation Master DVD Distributed Java System Copy menu missing
Hello Gurus
We want to perfom an Java system copy of our EP 6.0 using sapinst
The source OS is Solaris 8.0 with Oracle 10.2.0.2
The target OS is Solaris 10.0 with Oracle 10.2.0.2
Our architecture is Distributed , CI is running on a system and DB server on another system.
For this operation we use the master DVD 51033746_12 but we have an issue in exporting the DB as the
Option for exporting the DB on a Distributed system is not displayed on the sapinst Menu .
We followed the last guide taken from sap 'Homogeneous and Heterogeneous System Copy for SAP Systems Based on SAP Web Application Server Java 6.40 SR 1' and this option should be listed
Excerpt:
Choose the installation service SAP NetWeaver u201904 Support Release 1--> Java System --><DB> --> Distributed System --> Migration - Database Export.
Unfortunately the Distributed system is not displayed and though we are stuck at the export step .
I could not find any sapinst patches . Is it a known issue for Soalris system and is there a Workaround .
Thanks for your help
De Palma Lionel .Hello
Thanks for your answer . Unfortunately this option is not available as we are using a NW04 SR1 system , not a nw'2004's one . With the latest master install (Installation_Master_6.20_6.40_05_08 51033746_5 )we have the choice of
System copy Source --> Java system --> oracle --> Migration Data export
--> HA Java system --> oracle --> Migration Data export
System copy Target --> Java system --> oracle --> Central system-> Migration Data export
Target --> Java system --> oracle --> Distributed system -> Migration Target Central instance / Db instance install
The Distributed system is available for Import option but no for the export one .
My questions are :
- Can we use a master nw2004's master DVD for system copy on a Nw'04s one ?
- As the central instance is hosted on different system than DB instance , should I use the HA option ?
Regards -
Java System error: SSO not authorized: authorization Failed
Hi,
I am getting the following error while opening a BEx report designer or WAD and iam unable to design any report or create a dashboard
"Java System Error: Call to FM BICS_CONS_GET_VIEW_DEF_J_PROXY to ProdId ASEP_PORTAL_E01 on host ASEP wiht SSO not authorized . Authentication Failed"
System Details:
BI and EP are installed in Same server
BI Config:
softwarwe component : SAP_BW
Release : 700
Patch Level: 0021
Support Pack : SAPKW70021 (SAP NetWeaver BI 7.0)
EP config:
SAP NetWeaver BI 7.0 SP Level 15
Please suggest .It seems that something wrong in integration between JAVA Stack (from where you accessing BW report) a BW back end system. Try to run Support Desk Tool:
http://<your_server>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.ip.bi.supportdesk.default
to see what is wrong in this area. -
Error MUT-02041 : While exporting the data from Java system.
Dear Friends,
When exporting data from Java system (source system) using SAPINST. We are getting
the below error in 4 of 5 (Archiving SDM Repository) stage.
Error :
MUT-02041 SDM call of createsdmkitjar ends with returncode 2
With this, I am unable to proceed further. Please help me on this to proceed further.
Thanks in advance,
regards,
SrinivasHi All,
I could find the below error log from sapinst.log file.
=============
Info: Exclude components as specified
in /usr/sap/IPD/DVD_JAVA/51033746_1/Installation_Master_6.20_6.40_05_08/IM_AIX_PPC64/SAPINST/COMMON/INSTALL/JMIG/EXCLUDE.XML
Info: Resulting JAR
file: /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR
Info: No temporal directory for packing is provided. SDM home directory
will be used.
Info: Pack directory exists already. Remove it first.
Info: Start packing the components of com.gsk in
packedOrigin_com.gsk.jar
Info: Create /usr/sap/IPD/JC02/SDM/program/pack/packedOrigin_com.gsk.jarInfo: The components of com.gsk were successfully packed in
packedOrigin_com.gsk.jar
Info: Start packing the components of local in packedOrigin_local.jar
Info: Create /usr/sap/IPD/JC02/SDM/program/pack/packedOrigin_local.jar
Info: Create /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR
Warning: Warning during command execution: No metadata files exist for
development
component 'revtrac_agu11'/'local'/'LOKAL'/'0.2009.08.11.10.56.14'/'0'.
Cannot pack this archive.
No metadata files exist for development
component 'revtrac_aug13eartest'/'local'/'LOKAL'/'0.2009.08.13.14.44.25'/'0'. Cannot pack this archive.
No metadata files exist for development
component 'Aug10_09'/'local'/'LOKAL'/'0.2009.08.10.14.39.29'/'0'.
Cannot pack this archive.
No metadata files exist for development
component 'Aug14'/'local'/'LOKAL'/'0.2009.08.14.10.46.38'/'0'. Cannot
pack this archive.
No metadata files exist for development
component 'Aug14two'/'local'/'LOKAL'/'0.2009.08.14.10.55.21'/'0'.
Cannot pack this archive.
No metadata files exist for development
component 'revtrac_aug11b'/'local'/'LOKAL'/'0.2009.08.13.14.36.43'/'0'.
Cannot pack this archive.
Missing archives may lead to errors after the packed SDM installation
has been extracted later.
Info: This SDM installation has been packed
to /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR
To unpack this installation again,
extract /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR and invoke the
SDM command install with parameter extractpackedinst=true
Executed, but finished with warning(s). Return code: 2
Error: Executed, but finished with warning(s). Return code: 2
ERROR 2010-10-21 15:54:48
MUT-02041 SDM call of createsdmkitjar ends with returncode 2
=============
Can you please check this and help me on this to proceed further.
thanks..
Srinivas -
Exporting Java Add in and Importing to Standalone Java system
Hi,
I have a requirement to export Java system which is ABAP+JAVA and build a new standalone Java system through import. Is it possible, if so please provide any documents or links.
Thanks
ShivHi Shiv,
I've never heard that it's possible, but you could install a new Java system and import the self devloped components of your java software there (e.g. in SLD you can export a software component and then import it somewhere else). For database tables you might use an export- import function of your database, but I'm not sure about that.
Regards
Cornelia -
ABAP+JAVA system copy using 3rd party export/import tools
Hi all,
I am trying to do a homogenous system copy. I am following the syscopy guide for SAP NW 7.0 SR3 ABAP+JAVA systems
We are running AIX 5.L and Oracle.
My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
I know it is possible to restore the database from an offline backup using BRTools rather than r3load and jload, and I just wanted to see if I can restore from a snap as it would save a lot of time in the procedure.
Any help or ideas would be much appreciated.
Thanks!>My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
That approach is not supported.
The reason is: combined instances write the instance name and hostname in various places, on the filesystem in .properties files, in the JDBC configuration, depending on the java applications you run on top in various other places. What you're trying to do is effectively "renaming" an instance.
Technically it's possible to do it and to get it run, yes, but the supported way is running sapinst and choose ABAP + Java system copy. This will prevent you from lots of (not really documented) manual work after the copy.
Markus -
CTS+ - Import failing in JAVA system - could not connect to SDM URL
Hi,
Currently I am setting up CTS+ for our landsscape. NW2004s Sp15 on SOlution Manager -dual stack.
I am able to create the transport from source system. when I click on Import STMS , giving the following error
class java.rmi.RemoteException:The user 'ADMINISTRATOR' could not be connected to the specified host
http://xxxxx:50018 ( also tried with SDM and other users) xxxx- target java system.
When I tried to connect to the url directly, http://xxxxx:50018, getting page cannot be displayed error.
SDM is running fine on target systems.
Configurations:
1. configured RFC destination on SOlution Manager (SM) system to connect to JAVA stack on SM
2. Created logical port
3. created RFC destination from Source system to SM
I guess, we dont have to do any configuration on target system (java). SDM is working fine.
Any help ?
Thanks in Advance!
Edited by: rkandy on Aug 20, 2008 2:54 PMHi,
Currently I am setting up CTS+ for our landsscape. NW2004s Sp15 on SOlution Manager -dual stack.
I am able to create the transport from source system. when I click on Import STMS , giving the following error
class java.rmi.RemoteException:The user 'ADMINISTRATOR' could not be connected to the specified host
http://xxxxx:50018 ( also tried with SDM and other users) xxxx- target java system.
When I tried to connect to the url directly, http://xxxxx:50018, getting page cannot be displayed error.
SDM is running fine on target systems.
Configurations:
1. configured RFC destination on SOlution Manager (SM) system to connect to JAVA stack on SM
2. Created logical port
3. created RFC destination from Source system to SM
I guess, we dont have to do any configuration on target system (java). SDM is working fine.
Any help ?
Thanks in Advance!
Edited by: rkandy on Aug 20, 2008 2:54 PM -
Symbolic link error when exporting during heterogeneous system copy
My enviroment is ECC6.0/Oracle 10.2.0.2/SUN Solaris 10 . I'm performing heterogeneous system copy to Oracle 10.2.0.2/AIX 6.1 enviroment.
I've succesfully exported & imported two systems ie DEV & Solutin Manager , but PRD system has an OS problem with symbolic links ie Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
I want to export both ABAP & JAVA stack but only the java stack is getting picked.
Below is part of the resultng sapinst.log
Thanks
INFO 2011-09-05 10:44:30.573
Execute step verifyJavaHome of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO[E] 2011-09-05 10:44:33.851
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:33.851
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO 2011-09-05 10:44:46.118
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Mon Sep 05 10:44:45 EAT 2011
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc
java.vm.version=1.4.2_09-b05
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=\:
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=unknown
java.vm.specification.name=Java Virtual Machine Specification
user.dir=/oracle/PRD/INSTDIR/sapinst_dir
java.runtime.version=1.4.2_09-b05
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.endorsed.dirs=/usr/j2sdk1.4.2_09/jre/lib/endorsed
os.arch=sparc
java.io.tmpdir=/var/tmp/
line.separator=\n
java.vm.specification.vendor=Sun Microsystems Inc.
os.name=SunOS
sun.java2d.fontpath=
java.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc/client\:/usr/j2sdk1.4.2_09/jre/lib/sparc\:/usr/j2sdk1.4.2_09/jre/../lib/sparc\:/tmp/sapinst_exe.29247.1315208256\:/usr/openwin/lib\:/usr/lib
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.FileSystemPreferencesFactory
os.version=5.10
user.home=/
user.timezone=Africa/Nairobi
java.awt.printerjob=sun.print.PSPrinterJob
file.encoding=ISO8859-1
java.specification.version=1.4
java.class.path=/tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar
user.name=root
java.vm.specification.version=1.0
java.home=/usr/j2sdk1.4.2_09/jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
java.vm.info=mixed mode
java.version=1.4.2_09
java.ext.dirs=/usr/j2sdk1.4.2_09/jre/lib/ext
sun.boot.class.path=/usr/j2sdk1.4.2_09/jre/lib/rt.jar\:/usr/j2sdk1.4.2_09/jre/lib/i18n.jar\:/usr/j2sdk1.4.2_09/jre/lib/sunrsasign.jar\:/usr/j2sdk1.4.2_09/jre/lib/jsse.jar\:/usr/j2sdk1.4.2_09/jre/lib/jce.jar\:/usr/j2sdk1.4.2_09/jre/lib/charsets.jar\:/usr/j2sdk1.4.2_09/jre/classes
java.vendor=Sun Microsystems Inc.
file.separator=/
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeBig
sun.cpu.endian=big
sun.cpu.isalist=sparcv9vis2 sparcv9vis sparcv9 sparcv8plusvis2 sparcv8plusvis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc
INFO 2011-09-05 10:44:47.076
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar:/tmp/sapinst_exe.29247.1315208256/JAR/sapxmltoolkit.jar -d64 com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2011-09-05 10:44:47.572
Execute step verifyPolicy of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO 2011-09-05 10:44:47.715
Execute step setNWOption of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
WARNING 2011-09-05 10:44:47.944
Could not determine a valid JAVA_HOME directory from the environment.
INFO 2011-09-05 10:44:48.86
Execute step assignUsersToSapinstGroup of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:48.890
Account sapinst already exists.
INFO 2011-09-05 10:44:48.894
Account prdadm already exists.
INFO 2011-09-05 10:44:48.917
Account oraprd already exists.
INFO 2011-09-05 10:44:49.73
Execute step useDatabaseMethod of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.217
Execute step setDatabaseMethodOra of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.341
Execute step setDatabaseMethodDB6 of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.480
Execute step mainExportParameters of component |NW_Export|ind|ind|ind|ind|0|0
INFO[E] 2011-09-05 10:44:52.251
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:52.252
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.760
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/cntrl), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.761
FSL-02061 Link /oracle/PRD/cntrl is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.762
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.762
FSL-02061 Link /oracle/PRD/._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.763
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sdubhibq), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.764
FSL-02061 Link /oracle/PRD/sdubhibq is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.765
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sduccayx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.765
FSL-02061 Link /oracle/PRD/sduccayx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.766
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/inventory), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.767
FSL-02061 Link /oracle/PRD/inventory is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.768
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/OPatch), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.768
FSL-02061 Link /oracle/PRD/OPatch is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.769
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/assistants), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.770
FSL-02061 Link /oracle/PRD/assistants is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.771
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/bin), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.772
FSL-02061 Link /oracle/PRD/bin is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.773
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/clone), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.773
FSL-02061 Link /oracle/PRD/clone is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.774
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/crs), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.775
FSL-02061 Link /oracle/PRD/crs is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.776
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/css), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.777
FSL-02061 Link /oracle/PRD/css is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.778
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/ctx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.778
FSL-02061 Link /oracle/PRD/ctx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.779
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/dbs), line (346) in file (syuxclink.cpp).Hi,
In PRD system, u might have craeted many symbolic links in /oracle/PRD fileystem . This should be avoided. Symbolic link should not be created in /oracle/PRD ...
Please check why symbolic links are created and get help from System Operation team . Please becareful to unlink symbolic links that are created by non-SAP. Make sure to perform full offline backup .
Please get the help from Unix System Operation team. Also it does not makes any sense to increase value of Unix parameter for maximum symbolic links.
Regards
APR -
Sun Java System Portal Server 6.0 FAQs
Sun Java System Portal Server 6.0 FAQs.
Author: Sanjeev Agarwal
Q. How to connect to external URLs from Sun ONE Portal Server? I want to use URL Scrapper for some of external sites/URLs.
Ans:
You can connect to external URLs if you have a Proxy Server running.
If you are using Web Server addition of Sun ONE the Portal Server then
go to /opt/SUNWam/servers/https-hostname.domainname/config/ dir
In the jvm12.conf file, enter the followings:
http.proxyHost=proxyservername.domainname
http.proxyPort=80 (or the appropriate proxy server port number)
https.proxyHost=proxyservername.domainname
https.proxyPort=80 (or the appropriate proxy server port number)
If you are using Sun ONE AppServer addition of Sun ONE Portal Server then
go to /var/opt/SUNWappserver/domains/domain1/<server-instance>/config dir
In the server.xml file, enter the followings:
<jvm-options>-Dhttp.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttp.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
<jvm-options>-Dhttps.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttps.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
After this modification restart the server.
Q. Explain all the processes (solaris 8 and S1 Portal Server 6.0) which runs when I start the Sun ONE Portal Server.
Ans.
These are the processes that a running Portal Server installation (Sun ONE WebServer addition, without SRAP) generally has by default.
1. Directory server processes:
- ns-slapd (LDAP server instance)
- uxwdog (admin server process) (parent process)
--- ns-httpd
----- ns-httpd
2. Auth Helper processes:
- doUnix
3. Web-Server/Identity-Server/Portal-Server processes:
As the Portal Server and Identity Server runs as web application on the Web Server, so they share the same JVM and processes.
- uxwdog (web server admin server process) (parent process)
--- ns-httpd
----- ns-httpd
(for each web server instance)
- uxwdog (parent process)
- ns-httpd
- ns-httpd
or (in case of MaxProc=n )
- uxwdog (parent process)
--- ns-httpd
----- ns-httpd
----- ns-httpd
----- n
Q. I have created a custom Provider but getting this error when I access the desktop, what do I do?
> error in the desktop.debug file:
> ERROR: DesktopServlet.handleException()
> java.util.MissingResourceException: Can't find bundle for base name CustomTabContainerProvider,
Ans:
It needs a resource bundle for the custom provider. You need to create a file CustomTabContainerProvider.properties (as mentioned in the error message) and put it into the /etc/opt/desktop/classes directory. If you are not using any properties defined in this resource file then it can be a empty file. Have a look on the properties files that bundled containerProviders uses in dir <portal-install-dir>/SUNWps/web-apps/https-<host.domain>/portal/WEB-INF/classes.
As you are extending JSPTabContainerProvider class, you can just copy the file JSPTabContainerProvider.properties from the above directory after renaming it to the <defined-provider-name>.properties (in your case CustomTabContainerProvider.properties) and move it into /etc/opt/desktop/classes directory.
Q. what is actually multiple instances of Portal Server means?
Ans:
Multiple instance of Portal Server means, you will have more http listeners for the same desktop contents and the same identity profiles stored in a single Directory Server which all the instances share.
In simple words you can have your Portal Server listening on different http ports, but uses same configuration, desktop and identities.
It can help you to share the load for Portal Server http requests. The alternate methods are to create more web server virtual server processes (maxProc=n, but in this case the listening port will be 1 only) or use some hardware load balancer.
You can achieve more from multiple instances if you have a multi level organization, you can change the look and feel of all the instances, images, services, components and can assign each instance to different organization or sub-organization.
Q. How do I check the availability of the Sun ONE Portal Server/Identity Server services.
Ans:
You can check the availability of Sun ONE Identity Server services from following urls.
http://<host.domainname>:<port>/amserver/sessionservice
http://<host.domainname>:<port>/amserver/loggingservice
To know the availability of components of Sun ONE Portal Server like Desktop/providers/Rewriter/Netmail you have to login into desktop. These are not services, but just the programming identities which will work if your Web Server and Identity Server is running.
Just go to URL http://<server>:<port>/portal/dt , if it shows up that means your portal server is fine, and these entities will work for sure.
Q. I am able to add the yahoo channels to existing users. But I am getting the weather for London not for local New Jersey. My language pref is to en|en_US and also the server is the default U.S server and not europe. How do I add the cities I want to see on weather channel?
Ans:
A Portal user himself (after login) can select what cities he want to see in weather channel.
Steps:
- click the edit button of weather channel
- click on the area you belong to from Available Sections
- select the cities from Available Cities select box and add them to Your Choices.
- click finished from select city page and then again click finished from select area page.
It will come back to the Portal Desktop and you will see all the cities you have selected in the weather channel.
Q. How to use getContent() method to use in custom jsp providers (developed by ourselves) so that it can be used to retrieve a jsp page. I have already placed the JSP file in the directory structure /etc/opt/SUNWps/desktop/default/channel_dir. But still the jsp is not being displayed.
Ans:
You don't have to do anything in the custom JSPProvider's getContent method except the call { return super.getContent(request,response); } . If all you want is just to show your jsp, then create a channel from the default JSPProvider, and edit the property contentPage of that channel from samplecontent.jsp to your jsp name, save the changes and login again. You should see your JSP.
Q. I want to remove all the buttons (help/edit etc.) from all the channels/one particular channel in my desktop?
Ans:
You can hide any buttons you want from any channel.
These steps show how to hide all the buttons.
1. Create a channel say "myNetlet" from netlet provider.
2. Set the channel title to "myNetlet"
3. Go to the dir /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider and edit the file providerCommands.jsp, and modify the last line :
from :
<%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%>
to:
<% if ( !(title.equals("myNetlet"))){ %><%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%><% } %>
4. Clean the dir mentioned below which contains compiled JSPs. /var/opt/SUNWps/https-<host>.<domain>/portal/tmp/_jsps/_etc/_opt/_SUNWps/_desktop/_default_en/_JSPTableContainerProvider/_html and reload the page.
Relogin, and you would not see any buttons on "myNetlet" channel. You can customize this logic as per your needs.
Q. How to change the title of SampleJSP Channel. I tried to change the channel properties title value via iplanet directory Server Access Management GUI. But it is not getting reflected.
Ans:
Through Admin console you can change the channel property "title", and as soon as you refresh the page (Shift reload) of relogin in the portal it get's reflected.
The reason to this problem may be due to the channel property "title" is having "propagate" value as false and you are setting the channel title in the org level display profile not in the user level display profile.
So better you change the channel name in user's display profile also.
For this login into admin console and go to :
- View: "User Management" -> click on organization -> Show: Users
- click on the blue arrow of that user
- click on Edit in section Desktop (this will open a window)
- then change the channel properties same way you do for Organization display profile.
Q. Login Problem with SunOne Portal 6.0.
I was able to download and install sun one portal 6 on Solaris 8. The sample portal page came up after installation. However whenever I try to login to the Login channel with "amadmin" and the passphrase I used during installation, it takes me to another page - iPlanet/LDAP authentication page. Here I tried using the same login, but fails every time (the same login page appears). The url that shows is "http://<hostname>/amserver/login?module=dproadmin&goto=/amconsole/base/AMAdminFrame"
I tried registering myself as a new user as well. This too fails.
Ans:
Make sure you are giving fully qualifying the hostname in the url which invoked the desktop. This in fact is documented in the administration documentation. If the hostname is not fully-qualified, the login page goes into an endless mode. Again, the correct url is "http://<fully-qualified-hostname>/portal". Once you get to the desktop, the login and the new user registration works.
Q. How to send variables/parameters from 1 app to another app deployed on Sun ONE Portal Server? It may be the apps or different JSPs of JSP provider channel.
How to achieve inter channel communication in Sun ONE Portal Server?
Ans:
You can use servlet context object or session, or may be the request object itself to store the information from one channel and use that in another channel. The use of either of these 3 approaches may depend on your requirements. Using session, the information will be available to that user's channels only, using request, the information will be available for that user and that request only and by using ServletContext you can share the information across users and sessions. You can obtain DesktopServlet's ServletContext object inside JSP/JSPProvider.
Q. I am trying to modify the default desktop JSPs in TableContainerProvider and TabCotntainerProvider dirs, but it is not picking my modified JSPs ? what do I do?
Ans:
One easiest way to 100% ensure that it updates all your new jsp pages is to remove all the compiled jsps so that with next request the Sun ONE Portal Server compiles all the jsps and will make sure that your modification will be taken care of in next request.
Go to /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ and remove everything. and access the Portal server, it will be little slow as it has to compile all the JSPs again. Here you will find directories in the name of Containers and Channels, so if you are modifying any particular Container/Channel you can just delete that only. This approach can help a lot during development time.
Q. What is the location of compiled JSPs in Sun ONE portal Server and what servlet spec does it supports?
Ans: The Portal server 6.0 runs on Sun ONE Web Server 6.0 sp2, which supports only jdk 1.3 and servlet spec 2.2 only. The Sun ONE Portal Server keeps the compiled jsps of desktop and channels in : /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ dir as per the channels/container names.
Servlet 2.3 is supported if you run the Portal Server edition that runs on Sun ONE Application Server 7.0.
Q. How do I change jdk for Sun ONE Portal Server to another jdk? I want to change the JDK of only one of my Portal Server instances, is it possible? how?
Ans:
Yes you can achieve both.
A. To change the JDK for all the server instances:
Open <portal-install-dir>/SUNWam/servers/https-admserv/start-jvm file and modify the first line
NSES_JDK=/usr/java_1.3.1_04; export NSES_JDK
to
NSES_JDK=<your-jdk-location> ; export NSES_JDK
then open <portal-install-dir>/SUNWam/servers/https-<instance-name>/config/jvm12.conf file of all the server instances and add a line
jvm.option=-server after the first line
B. To change the JDK for a particular server instances:
Make a another copy of the start-jvm file rename it and modify the jdk location in it as mentioned above.
Open the start script from <portal-install-dir>/SUNWam/servers/https-<instance-name> dir and modify these lines :
if test -r {SERVER_ROOT}/https-admserv/start-*
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/start-*
modify this to
if test -r {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
Note: As Portal Server 6.0 uses Web server 6.0 sp2, jdk 1.4 is not supported.
Q. How do I create a custom login page or a link, which will just log me into the portal server.
Ans:
You can create a custom page in your jsp page, just add this portion of html into your web page :
<FORM action="http://<server>:<port>/amserver/login?module=<login-module>&page=1" method=post name=login_form2 target=_top>
Login page using <login-module><br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
The <login-module> can be LDAP or Unix or Membership which ever you have enabled. Or instead of this you can create a link. For example for LDAP auth module :
"<a href="http://<server>:<port>/amserver/login?module=LDAP&page=1&TOKEN0=user&TOKEN1=password" target=_top> Login into Portal </a>"
where user and password are the user credential for the portal server.
Q. Can I install a portal server pointing to another Identity server? I want to install few postal servers (on different machines) pointing to same identity server, is it possible?
Ans:
No, right now the Sun ONE Portal Server is tightly integrated with Sun ONE Identity Server so you can't just install only Sun ONE Portal Server and point it to another Sun ONE Identity Server. You can have a common Directory server if you want.
Q. I have an application which takes input in from anonymous user and then to complete the request the user than has to login. I am having problem in passing the taken input from anonymous page to logged in user. all the request parameters are lost when I log in. How do i get the request parameters after I log in
Ans:
You can create a custom login page and submit the form to "/amserver/login" with a hidden parameter "goto" through which you basically specify which url to go after you log in. So you can use this mechanism to create a query string with all your request parameters you want to pass after login. For example:
You can create a jsp which take few inputs from user and to complete the request you have to login so it posts the input form to a login jsp and stores the parameters taken from user in a hidden field (goto) :
<FORM action="/amserver/login?module=LDAP&page=1" method=post name=login_form2 target=_top>
Login page using LDAP<br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<INPUT TYPE=HIDDEN NAME="goto" VALUE="/portal/dt?param1=<%=request.getParameter("param1")%>¶m2=<%=request.getParameter("param2")%>">
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
After you login through this page both the param1 and param 2 will be available in the request object after you login and you can retrieve them in your application or jsp.
Q. I have few System.out.println in my jsp which i am using in my JSP provider channel, but when I look at the portal server's /var/opt/SUNWam/debug/desktop.debug file, none are there. I looked at the web server's access and error logs too, but it is not there also. Can somebody tell me how do it get those ? Do we have any other mechanism to put debug logs ?
Ans
By default the binary which web server runs is uxwdog which eats up System.out.println output. If you want to see the System.out.println then you need to change the product binary from the start script of the portal server instance.
- Go to <portal-install-dir>/SUNWam/servers/https-<instance-name> and open the start script
- Change the PRODUCT_BIN=uxwdog to PRODUCT_BIN=ns-httpd , save the file
- Run the script ./start to start the portal server
Note : with ns-httpd ON the server will not leave that shell, and in the same window/shell you will be able to see all your System.out.println statements. To close the server you have to kill the server process with "kill -9 pids" command
Alternate way is to use api inside your application or jsp:
<%@page import="com.sun.portal.providers.jsp.JSPProvider, com.sun.portal.providers.*, com.sun.portal.providers.containers.*, com.sun.portal.providers.context.*" %>
<% JSPProvider p=(JSPProvider)pageContext.getAttribute("JSPProvider");
ProviderContext pc = p.getProviderContext(); %>
<%-- after that you can use these lines any where in your jsp --%>
<%
pc.debugError("your error msg");
pc.debugMessage("your msg");
pc.debugWarning("your warning msg");
%>
The particular mgs will be shwon in /var/opt/SUNWam/debug/desktop.debug file as per your "debugLevel" parameter setting in /etc/opt/SUNWps/desktop/desktopconfig.properties file. By default the debugLevel is set to error so only pc.debugError("error msg") will be shown.
Q. Multipart form (file upload) processing in providers? Is it supported
Ans:
The Sun ONE Portal Server's DesktopServlet does not have the ability to process a request with the content encoding type of multipart/form-data. DesktopServlet does not pass the input stream for the request on to the Provider.
To accomplish handling of multipart/form-data type requests, it is necessary to create a companion servlet or JSP that process the multipart/form-data. This servlet can then pass control back to the Portal channel. The data from the file can be shared between the servlet and the provider by using static Java members or by storing the data in a back-end database and then passing a reference to the data over to the provider.
Q. After installing the Portal Server I am trying to login as admin, but it is failing and coming back to login page every time. How do I login?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Try login using these credentials.
Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
Q. I installed Sun ONE Portal Server 6.0 some time back, and now I want to know all the installation parameters and user/passwords for whole portal installation. How do I do that?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
In case you have forgotten the port numbers and PASSPHRASE that you give during installation, you still can see all the information for each component of your Portal Server Installation. The Portal server and it's components like Directory Server, Web Server and IDSAME are installed as Solaris package so the system has all the information for these packages.
Portal Server : See file /var/sadm/pkg/SUNWps/pkginfo
Directory Server : See files /var/sadm/pkg/SUNWamds/pkginfo and /var/sadm/pkg/SUNWamdsc/pkginfo
Web Server : See file /var/sadm/pkg/SUNWamws/pkginfo
Identity Server : See file /var/sadm/pkg/SUNWamsam/pkginfo
Note: In any case you should never edit/modify these files.
Q. Controlling the display of the help (?) button.
Where are the links/image elements defined for the help/edit/minimize buttons? the leafWrapper.jsp pulls the hashtable out of the HttpRequest, and that hashtable is being used by providerCommands.jsp:
Hashtable commands = (Hashtable)request.getAttribute("provider_cmds");
Any idea where this is being set?
Ans:
- You can remove the help/edit button of any channel by adding the line into the Channel's properties by editing the Xml of display profile in the admin console.
<String name="helpURL" value="" advanced="false" merge="replace" lock="false" propagate="true"/>
<Boolean name="isEditable" value="false" advanced="false" merge="replace" lock="false" propagate="true"/>
The Attribute 'provider_cmds' is set into /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider/tablecolumn.jsp :
<dttable:getProviderCommand id="provider_cmds" scope="request" />, and after that only the leafwrapper.jsp is included, but the Hashtable is generated by a class com.sun.portal.providers.util.ProviderCommands.java and made available through taglib classes. So you can't change the generated contents/string in the Hashtable.
But you can change the default 'alt' text displayed and the images linked to the help/edit icons. As this modification is at Provider level, it will change the icons for all the channels in the desktop.
Please see the file:
/opt/SUNWps/web-apps/https-<host>.<domain>/portal/WEB-INF/classes/JSPTABLEContainerProvider.properties.
Here you will find the mapping. The image location are given from the context root of portal server which is by default : /opt/SUNWps/web-apps/https-<host>.<domain>/portal.
Q. I have a number of web applications needed to integrate to portal server. Any pointers or tips of what my option is?
Ans:
You can very well integrate all your web application with Portal server. Portal Server 6.0 has web container same as Sun ONE web server 6.0 Sp2, which runs on Jdk-1.3.
If your web applications are just Servlets/Jsps then you can very well port them on Portal server's webserver which supports war module deployment. (infect for Web server the Portal server and Identity server is like a war module.)
There can be two possibilities in this case, either you put the whole of your application on portal server and make the link available into the desktop via 'Application Provider Channels' or you can create a client to your web application into portal server.
If your web application is on Sun ONE Application server 7.0 and needs authentication, you can also have SSO. If you just want to show the link of your web application into desktop then you can either use URL Scrapper to show the first page of your web application or use Bookmark channel to provide just the url.
The easiest way to make a client of your web application is to use JSP Channel using JSPProvider and put your logic into the samplecontents.jsp file or you can create your own custom Provider extending JSPProvider. There can be a lot of different configurations, depending on the web application you want to integrate and your needs
Q. I removed few channels from the org level display profile but still they are coming to the desktop of users, I had accessed the desktop before. why?
Ans:
If you still see any channel after you remove it from the display profile at organization lever, that means you have to edit the user's display profile. So go to admin console and select User from Show: menu and click on the blue arrow near the user. In the right frame under the 'Desktop' category click on the Edit link (right side). This will open user's display profile in a window. Now edit it as per your requirements.Unfortunately Web Server 6.0SP2 is no longer available for download.
If you must use Web Server 6.0, you should use the most current Service Pack. It is backward compatible and contains many performance and security fixes. -
ABAP+JAVA System Copy -- Administrator account getting locked
Hi,
I am in the process of doing system copy of my portal to a new server. As per the SAP instructions, I had updated the JDK and SP levels of my EP to the latest supported ones.
Now when i am doing JAVA Add-in Export of my system, SAPinst is throwing error that --
"Error connecting to http://Entportal:50000/sap/monitoring/SystemInfoServlet. The provided user data might be incorrect or user might be locked.:
and when I check the "administrator" user account, it is getting locked. Even though I manually unlock it and update the password is secure storage, still when I run SAPinst, again it is getting locked. I have also chnged the path of my temporary directory to c:\temp which has no spacees in it, according to SAP instructions.
I have raised the issue through OSS, but still, in the mean time can sombody help me?
Regards,
MandarHi Akshay,
I am not using any ID. SAPInst itself is trying to access systeminformationservlet using administrator account. at this stage it is failing to get the correct password and thats why my administrator account is getting locked.
Regards,
Mandar. -
Java Export ( ABAP+JAVA) BI 7.0
Could someone please help me to understand ..
1 . Purpose of java export
2 . Should we take java export immediately after database backup (ABAP) completes . how these two ( ABAP+Java) , how they are interrelated .
3. If database backup ( ABAP) fails for a given day , then is it fruitful to take java export of that particular day .
ThanksHi,
1. Purpose of java export
Because complete recovery of java system can only be possible with file ssytem recovery.
2 . Should we take java export immediately after database backup (ABAP) completes . how these two ( ABAP+Java) , how they are interrelated .
Yes
3. If database backup ( ABAP) fails for a given day , then is it fruitful to take java export of that particular day .
Nope it will not help you to recover the ssytem.
Regards,
Vamshi. -
Distributed java system copy of NW2004s......
Dear friends
we have an requiremen on SAP NETWEAVER portal environement, we have to take a java system copy of our produciton portal.
our source portal landscape details as follows:
CI: Host A
DB : Host B
Target portal landscape:
CI & DB on same host.
EXPORT:
i have taken the distributed system copy of HOST A CI , and taken full DB backup , refreshed the same backup on our new target DB.
and export of host A is showing very low size . i mean in MB's
IMPORT:
while i started the import, i have installed the central services intances (SCS..) it went succesfully.
restored th DB backup on our new DB.
when i started the CI installation it got strucked with following errors.
pls assist me.
*INFO 2011-02-18 15:37:57
Execute step askSecStoreFiles of component |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|11|0.
ERROR 2011-02-18 15:37:58
CJS-00030 Assertion failed: in
function NW_CI_Instance_ind_ind_ind_ind_DialogPhase_askSecStoreFiles() {
if (!NWInstall.getSystem(context.get("sid")).isSecStoreAvailable()) {
ASSERT(arguments.callee, !installer.onUnix(), "SecureStore files must be available on Unix. Check if the global directory is mounted.");
context.makeChangeable("secStoreSrcDir");
var client = new ClientMapping();
client.mapContextParameter("secStoreSrcDir", "'secStoreSrcDir'");
installer.setKdbClient(client.getMapping());
gui.invokeDialog({sid:"d_nw_ask_secstore_files"});
} else {
context.makeUnchangeable("secStoreSrcDir");
SecureStore files must be available on Unix. Check if the global directory is mounted.
ERROR 2011-02-18 15:37:58
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2011-02-18 15:37:58
FCO-00011 The step askSecStoreFiles with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|11|0|askSecStoreFiles was executed with status ERROR *Hi,
Check below link:
SecureStore files must be available on Unix. Check if the global directory
Thanks
Sunny -
In ABAP+Java system installation
Hi,
I installed ABAP+Java system On that i installed XI 3.0 SR1.I after applying the J2EERTOS11_0-20000118.SAR patch on J2EE engine.This patch consist of lot of bugs.I just stopped the installation of patch.After again when i log on to J2EE engine with port 50000.Its showing no page dispaly on localhost.I checked the J2EE instance.J2EE instance running properly.Even i can't log in to SDM and J2EE administartor.
Before patching I can able to log in.But now its loging failing.
May be the error is at 50000 port.I installed everything on one Central instance.
Need urgent reply.Hello,
i think that you want to patch your j2ee-server. Therefore you have to download four parts for PATCH SP11.
Support Packages and Patches > SAP NetWeaver > SAP NETWEAVER SAP NETWEAVER 04 > Java Server:
J2EERT11_0-10001982.SAR (Part 4/4)
SAPINST10_0-20000118.SAR
J2EERTOS11_0-20000118.SAR
CTRL<database>11_0-20000118.sar
You have to download all these files and extract then in one folder - there you have to use the sapinst and install the patch.
I hope i understood your requirement the right way.
Regards,
Andr'e -
SEVERE ERROR: Starting system failed, rc=0
Hi Experts
I am having problem in SRM 2.0 to SRM 5.5(NW 7) Upgrade. I have problem in startup of Shadow Instance. Here is log description.
more DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 01] Wed Jan 9 17:56:30 2008
[Thr 01] WLM Tag 'ED2/MSG' successfully set for this process
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4722694
*[Thr 01] **LOG Q01=> MsSInit, MSStart (Msg Server 1 4722694) [msxxserv_mt. 1824
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] load acl file = /usr/sap/put/ED2/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 01] HTTP logging is switch off
*[Thr 01] **LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp
p 3174]
*[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 8*
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:8100) [nixxi.cpp 3174]
*[Thr 01] *** ERROR => MsHttpCommInit: Ni2Listen(8100) (rc=NIESERV_USED) [msxxhtt*
p_mt. 3444]
*[Thr 01] *** ERROR => MsHttpPortBind: MsHttpCommInit (port=8100) [msxxhttp_mt. 3*
847]
*[Thr 01] *** HTTP port 8100 state CLOSED ****
[Thr 01] MsHttpOwnDomain: own domain[1] = ent.agt.ab.ca
[Thr 01] ms/icf_info_server : deleted
*[Thr 01] *** I listen to port sapmsSHDED2 (3605) ****
[Thr 01] CUSTOMER KEY: >N1501146322<
more STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080109175630")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPED2
4 ETQ399 auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPED2
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX
_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/ED2/SYS/exe/run
4 ETQ399 ext. env.: LIBPATH=/usr/sap/ED2/SYS/exe/run:/usr/lib:/lib:/usr/sap/ED2/
SYS/exe/run
4 ETQ399 2008/01/09 17:56:30: put_execute: (startsap) forkpid:9027768
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
You help & time in this matter will be highly appreciated.
Thanks & Regards
JigneshHi Marcus
Thanks for quick response. I did same exercise earlier. Shadow Instance started without dispatcher.
iedm3330dd:ed2adm> ps -ef | grep ED2_DVEBMGS01
ed2adm 4817018 7942216 0 09:16:45 - 0:00 ms.sapED2_DVEBMGS01 pf=/usr/s
ap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4821170 7942216 0 09:16:45 - 0:00 co.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4849734 7942216 0 09:16:45 - 0:00 se.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4853912 8847520 0 10:01:29 pts/1 0:00 grep ED2_DVEBMGS01
Log file :
iedm3330dd:ed2adm> pwd
/usr/sap/put/ED2/DVEBMGS01/work
iedm3330dd:ed2adm> more dev_disp.new
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid ED2
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 4853984
Thu Jan 10 09:16:46 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 4853984) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 111 successfully loaded
shared lib "dw_xtc.so" version 111 successfully loaded
shared lib "dw_stl.so" version 111 successfully loaded
shared lib "dw_gui.so" version 111 successfully loaded
shared lib "dw_mdm.so" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
WARNING => DpNetCheck: NiServToNo(sapdp01) failed (rc=-3)
ERROR => DpNetCheck: NiServToNo(sapgw01) failed (rc=-3) [dpxxtool2.c 5223]
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust t
he DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >iedm3330dd_ED2_01 <
DpShMCreate: sizeof(wp_adm) 7488 (936)
DpShMCreate: sizeof(tm_adm) 4957464 (24664)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548040/548048
DpShMCreate: sizeof(comm_adm) 548048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 7000000000a6000, size: 5603560)
DpShMCreate: allocated sys_adm at 7000000000a6000
DpShMCreate: allocated wp_adm at 7000000000a7ba0
DpShMCreate: allocated tm_adm_list at 7000000000a98e0
DpShMCreate: allocated tm_adm at 7000000000a9940
DpShMCreate: allocated wp_ca_adm at 700000000563e58
DpShMCreate: allocated appc_ca_adm at 7000000005684a8
DpShMCreate: allocated comm_adm at 700000000569c18
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 7000000005ef8e8
DpShMCreate: allocated gw_adm at 7000000005ef968
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 7000000005ef998
DpShMCreate: allocated wall_adm at 7000000005ef9a0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ERROR => DpIPCInit2: NiServToNo failed (--3) [dpxxtool2.c 511]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:16:56 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jan 10 16:16:56 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl Us
er Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Thu Jan 10 16:16:56 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 1870]
Dump of tm_adm structure: Thu Jan 10 16:16:56 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Jan 10 16:16:56 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:17:01 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >iedm3330dd_ED2_01 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x110750af0 )
ShmKeyPermission( 76 ) = 0740 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 1, 3 )
ShmCreate( 1, 0, 2, -> 0x7000000000a4000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 2, 3 )
ShmCreate( 2, 0, 2, -> 0x7000000000a6000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 3, 3 )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x700000030000000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 14, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 11, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 33, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 42, 0, 2, 0xfffffffffffec78 )
Profile configuration error detected, use temporary corrected setup
Shared Pool 40: ipc/shm_psize_40 = 68000000 (too small)
Shared Pool 40: (smaller than default 112000000)
Shared Pool 40: (default size assumed 112000000)
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 43, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 45, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 44, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 54, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 46, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 47, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 17, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 34, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 58, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 51, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 52, 3 )
ShmCreate( 52, 0, 2, -> 0x700000000600000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 30, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 56, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 10, 3 )
ShmCreate( 10, 0, 2, -> 0x700000000000000 )
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 57, 0, 2, 0xfffffffffffec78 )
ShmCreate( 10, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 10 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0xfffffffffffed60 )
ShmKeyPermission( 62 ) = 0740 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3239]
MpiCleanup() -> 1
removing Semaphore-Management
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0xfffffffffffed70 )
ShmGet( 10, 31, 0, 2, 0xfffffffffffebf8 )
ShmCreate( 10, 0, 2, 0xfffffffffffea18 )
ShmKeyPermission( 10 ) = 0740 (octal)
ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c 431]
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 4853984) [dpxxdisp.c 10631]
shutdown completed - server stopped ***
I have already requested for port entry change in services file.
Jignesh -
Sun Java System Application Server8 can not startup (help me )
I work in an japanese compay in China. recently, my JSC can not work
who can help me
the error infomation is :
The Sun Java System Application Server could not start:
Possible reasons:
1.port conflict
2.Incorrect server configuartion
3.corrputed deployed application
my java Studio Creator version: 2004Q2 Update9
I have used this tool for three weeks , in the frist week. everything is ok.
no probroblem happened. in the second week ,sometimes my JSC can not startup, so I restarted my JSC. and it can work again. later, the same problem happened again. when I restarted my JSC , it sill does not work, so I have to restart my computer and it startup successfully,
two days later, the same problem happened again. I restarted my computer , it still did not work. so I have to change my port number in the domain.xml. sometimes it woks well, but sometimes I can't not startup.
in the third week, no matter what I do, the problem can not be solved.
some of my colleagues don't have such problem. but some of them have the same problem. when I run my project on the computer that don't have such problem , it can startup. I don't know why, just a little weird.
till now , no one in our company can tell why this problem happened.
and I believe that anybody who use JSC will encountered this error sooner or later.
who can tell me why will this problem happen? and where can I find some related imformation about this problem. thanks!!!!!!
my domain.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE domain PUBLIC "-//Sun Microsystems Inc.//DTD Application Server 8.0 Domain//EN" "http://www.sun.com/software/appserver/dtds/sun-domain_1_0.dtd">
<!--
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
-->
<!-- Generated from default-domain.xml.template -->
<domain application-root="${com.sun.aas.instanceRoot}/applications" log-root="${com.sun.aas.instanceRoot}/logs">
<applications>
<j2ee-application enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/MEjbApp" name="MEjbApp" object-type="system-all"/>
<j2ee-application enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/__ejb_container_timer_app" name="__ejb_container_timer_app" object-type="system-all"/>
<web-module context-root="/web1" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/adminapp/adminapp_war" name="adminapp" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
<web-module context-root="/asadmin" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/admingui/adminGUI_war" name="admingui" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
<web-module context-root="/com_sun_web_ui" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/com_sun_web_ui" name="com_sun_web_ui" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
</applications>
<resources>
<jdbc-resource enabled="true" jndi-name="jdbc/__TimerPool" object-type="system-all" pool-name="__TimerPool"/>
<jdbc-resource enabled="true" jndi-name="jdbc/PointBase" object-type="user" pool-name="PointBasePool"/>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="com.pointbase.xa.xaDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="__TimerPool" pool-resize-quantity="2" res-type="javax.sql.XADataSource" steady-pool-size="8">
<property name="DatabaseName" value="jdbc:pointbase:embedded:ejbtimer,database.home=${com.sun.aas.instanceRoot}/lib/databases"/>
<property name="User" value="pbPublic"/>
<property name="Password" value="pbPublic"/>
</jdbc-connection-pool>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="com.pointbase.xa.xaDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="PointBasePool" pool-resize-quantity="2" res-type="javax.sql.XADataSource" steady-pool-size="8">
<property name="DatabaseName" value="jdbc:pointbase:server://localhost:9092/sun-appserv-samples"/>
<property name="Password" value="pbPublic"/>
<property name="User" value="pbPublic"/>
</jdbc-connection-pool>
</resources>
<configs>
<config name="server-config">
<http-service>
<http-listener acceptor-threads="100" address="0.0.0.0" default-virtual-server="server" enabled="true" id="http-listener-1" port="28080" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="100" address="0.0.0.0" default-virtual-server="server" enabled="true" id="http-listener-2" port="21043" security-enabled="true" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="100" address="0.0.0.0" default-virtual-server="__asadmin" enabled="true" id="admin-listener" port="24848" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<virtual-server hosts="sif-caicj" http-listeners="http-listener-1,http-listener-2" id="server" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
<virtual-server default-web-module="admingui" hosts="sif-caicj" http-listeners="admin-listener" id="__asadmin" state="on">
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
</http-service>
<iiop-service client-authentication-required="false">
<orb max-connections="1024" message-fragment-size="1024" use-thread-pool-ids="thread-pool-1"/>
<iiop-listener address="0.0.0.0" enabled="true" id="orb-listener-1" port="23700" security-enabled="false"/>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL" port="21060" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="false" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL_MUTUALAUTH" port="21061" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="true" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
</iiop-service>
<admin-service type="das-and-server">
<das-config admin-session-timeout-in-minutes="60" autodeploy-dir="${com.sun.aas.instanceRoot}/autodeploy" autodeploy-enabled="true" autodeploy-jsp-precompilation-enabled="false" autodeploy-polling-interval-in-seconds="2" autodeploy-verifier-enabled="false" deploy-xml-validation="full" dynamic-reload-enabled="true" dynamic-reload-poll-interval-in-seconds="2"/>
</admin-service>
<web-container/>
<ejb-container cache-idle-timeout-in-seconds="600" cache-resize-quantity="32" commit-option="B" max-cache-size="512" max-pool-size="32" pool-idle-timeout-in-seconds="600" pool-resize-quantity="8" removal-timeout-in-seconds="5400" session-store="${com.sun.aas.instanceRoot}/session-store" steady-pool-size="0" victim-selection-policy="nru"/>
<mdb-container idle-timeout-in-seconds="600" max-pool-size="32" pool-resize-quantity="8" steady-pool-size="0"/>
<jms-service init-timeout-in-seconds="60" type="LOCAL">
<jms-host admin-password="admin" admin-user-name="admin" host="sif-caicj" name="default_JMS_host" port="27676"/>
</jms-service>
<log-service alarms="false" file="${com.sun.aas.instanceRoot}/logs/server.log" log-rotation-limit-in-bytes="2000000000" log-to-console="false" use-system-logging="false">
<module-log-levels admin="INFO" classloader="INFO" cmp="INFO" cmp-container="INFO" configuration="INFO" connector="INFO" corba="INFO" deployment="INFO" ejb-container="INFO" javamail="INFO" jaxr="INFO" jaxrpc="INFO" jdo="INFO" jms="INFO" jta="INFO" jts="INFO" mdb-container="INFO" naming="INFO" resource-adapter="INFO" root="INFO" saaj="INFO" security="INFO" server="INFO" verifier="INFO" web-container="INFO"/>
</log-service>
<security-service anonymous-role="ANYONE" audit-enabled="false" audit-modules="default" default-realm="file" jacc="default">
<auth-realm classname="com.sun.enterprise.security.auth.realm.file.FileRealm" name="file">
<property name="file" value="${com.sun.aas.instanceRoot}/config/keyfile"/>
<property name="jaas-context" value="fileRealm"/>
</auth-realm>
<auth-realm classname="com.sun.enterprise.security.auth.realm.certificate.CertificateRealm" name="certificate">
</auth-realm>
<jacc-provider name="default" policy-configuration-factory-provider="com.sun.enterprise.security.provider.PolicyConfigurationFactoryImpl" policy-provider="com.sun.enterprise.security.provider.PolicyWrapper">
<property name="repository" value="${com.sun.aas.instanceRoot}/generated/policy"/>
</jacc-provider>
<audit-module classname="com.sun.enterprise.security.Audit" name="default">
<property name="auditOn" value="false"/>
</audit-module>
</security-service>
<transaction-service automatic-recovery="false" heuristic-decision="rollback" keypoint-interval="2048" retry-timeout-in-seconds="600" timeout-in-seconds="0" tx-log-dir="${com.sun.aas.instanceRoot}/logs"/>
<monitoring-service>
<module-monitoring-levels connector-connection-pool="OFF" ejb-container="OFF" http-service="OFF" jdbc-connection-pool="OFF" orb="OFF" thread-pool="OFF" transaction-service="OFF" web-container="OFF"/>
</monitoring-service>
<java-config classpath-suffix="${com.sun.aas.installRoot}/pointbase/lib/pbclient.jar${path.separator}${com.sun.aas.installRoot}/pointbase/lib/pbembedded.jar${path.separator}" debug-enabled="false" debug-options="-Xdebug -Xrunjdwp:transport=dt_shmem,server=y,suspend=n,address=creator-14848" env-classpath-ignored="true" java-home="${com.sun.aas.javaRoot}" javac-options="-g" rmic-options="-iiop -poa -alwaysgenerate -keepgenerated -g" server-classpath="${com.sun.aas.javaRoot}/lib/tools.jar${path.separator}${com.sun.aas.installRoot}/lib/install/applications/jmsra/imqjmsra.jar${path.separator}${com.sun.aas.imqLib}/jaxm-api.jar${path.separator}${com.sun.aas.imqLib}/fscontext.jar${path.separator}${com.sun.aas.antLib}/ant.jar">
<!-- various required jvm-options -->
<jvm-options>-client</jvm-options>
<jvm-options>-Djava.endorsed.dirs=${com.sun.aas.installRoot}/lib/endorsed</jvm-options>
<jvm-options>-Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy</jvm-options>
<jvm-options>-Djava.security.auth.login.config=${com.sun.aas.instanceRoot}/config/login.conf</jvm-options>
<jvm-options>-Dsun.rmi.dgc.server.gcInterval=3600000</jvm-options>
<jvm-options>-Dsun.rmi.dgc.client.gcInterval=3600000</jvm-options>
<jvm-options>-Xmx512m</jvm-options>
<jvm-options>-Djavax.net.ssl.keyStore=${com.sun.aas.instanceRoot}/config/keystore.jks</jvm-options>
<jvm-options>-Djavax.net.ssl.trustStore=${com.sun.aas.instanceRoot}/config/cacerts.jks</jvm-options>
<jvm-options>-Djava.ext.dirs=${com.sun.aas.javaRoot}/jre/lib/ext${path.separator}${com.sun.aas.instanceRoot}/lib/ext</jvm-options>
<jvm-options> -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver</jvm-options>
<jvm-options>-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar</jvm-options>
<jvm-options>-XX:NewRatio=2</jvm-options>
</java-config>
<thread-pools>
<thread-pool idle-thread-timeout-in-seconds="120" max-thread-pool-size="200" min-thread-pool-size="0" num-work-queues="1" thread-pool-id="thread-pool-1"/>
</thread-pools>
</config>
<!-- config model with name "server-config" ends -->
</configs>
<servers>
<server config-ref="server-config" name="server">
<application-ref enabled="true" ref="adminapp" virtual-servers="__asadmin"/>
<application-ref enabled="true" ref="admingui" virtual-servers="__asadmin"/>
<application-ref enabled="true" ref="com_sun_web_ui" virtual-servers="__asadmin"/>
<application-ref enabled="true" ref="MEjbApp" virtual-servers="server"/>
<application-ref enabled="true" ref="__ejb_container_timer_app" virtual-servers="server"/>
<resource-ref enabled="true" ref="jdbc/__TimerPool"/>
<resource-ref enabled="true" ref="jdbc/PointBase"/>
</server>
</servers>
</domain>
my server.log
I am sorry there are some japanese words in the log
�v���I: fatal
����: information
�x��:warning
�R�l�N�V���������������G���[�������������� : error happened when connecting
Starting Sun Java System Application Server Platform Edition 8.0.0_01 (build b08-fcs) ...
[#|2006-02-10T12:59:48.050+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.4.2_06] from [Sun Microsystems Inc.]|#]
[#|2006-02-10T12:59:49.206+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2006-02-10T12:59:49.394+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2006-02-10T12:59:51.628+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|Creating virtual server server|#]
[#|2006-02-10T12:59:51.659+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|S1AS AVK Instrumentation disabled|#]
[#|2006-02-10T12:59:51.738+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-02-10T12:59:53.910+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [100]|#]
[#|2006-02-10T12:59:55.519+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Satisfying Optional Packages dependencies...|#]
[#|2006-02-10T12:59:55.707+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7008 : Initialized monitoring registry and listeners|#]
[#|2006-02-10T12:59:56.394+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5100:Loading system apps|#]
[#|2006-02-10T12:59:57.019+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
[#|2006-02-10T12:59:57.769+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]|#]
[#|2006-02-10T12:59:57.769+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!|#]
[#|2006-02-10T12:59:57.816+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0302: Starting Tomcat.|#]
[#|2006-02-10T12:59:57.957+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [adminapp] in virtual server [server] at [web1]|#]
[#|2006-02-10T12:59:58.113+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [admingui] in virtual server [server] at [asadmin]|#]
[#|2006-02-10T12:59:58.113+0800|�x��|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
[#|2006-02-10T12:59:58.129+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [com_sun_web_ui] in virtual server [server] at [com_sun_web_ui]|#]
[#|2006-02-10T12:59:58.129+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Starting tomcat server|#]
[#|2006-02-10T12:59:58.129+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Catalina naming disabled|#]
[#|2006-02-10T12:59:58.222+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.core.StandardEngine|_ThreadID=10;|Starting Servlet Engine: Sun-Java-System/Application-Server-PE-8.0|#]
[#|2006-02-10T13:00:01.285+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.ContextConfig|_ThreadID=10;|�A�v���P�[�V������web.xml�����������������A�f�t�H���g�������g�p������ StandardEngine[server].StandardHost[server].StandardContext[]|#]
[#|2006-02-10T13:00:03.191+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g28080��������������|#]
[#|2006-02-10T13:00:03.254+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g 28080 ���N��������|#]
[#|2006-02-10T13:00:03.348+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g21043��������������|#]
[#|2006-02-10T13:00:03.363+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g 21043 ���N��������|#]
[#|2006-02-10T13:00:03.379+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g24848��������������|#]
[#|2006-02-10T13:00:03.379+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g 24848 ���N��������|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5035: Timed out after 60000 milliseconds while trying to verify if the JMS service startup succeeded.|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5037: Check permissions of MQ instance directory E:\Sun\Creator\SunAppServer8\imq\var\instances|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5036: More details may be available in the log file for the JMS service broker instance imqbroker. Please refer to the JMS provider documentation for the exact location of this log file.|#]
[#|2006-02-10T13:01:04.883+0800|�v���I|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: [C4003]: �R�l�N�V���������������G���[���������������B - ���o java.net.ConnectException: Connection refused: connect
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:415)
at com.sun.enterprise.server.PEMain.run(PEMain.java:224)
at com.sun.enterprise.server.PEMain.main(PEMain.java:172)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: com.sun.messaging.jms.JMSException: [C4003]: �R�l�N�V���������������G���[���������������B - ���o java.net.ConnectException: Connection refused: connect
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSConnectException(ExceptionHandler.java:233)
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleConnectException(ExceptionHandler.java:180)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:172)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:97)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:50)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:53)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:102)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnectionOld(ConnectionInitiator.java:271)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:107)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:92)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:562)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:1102)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1741)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:588)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:274)
at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:734)
at com.sun.enterprise.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:324)
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:384)
... 7 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at java.net.Socket.<init>(Socket.java:309)
at java.net.Socket.<init>(Socket.java:124)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:152)
... 25 more
|#]
[#|2006-02-10T13:01:04.883+0800|�v���I|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Server Startup failed. Exiting...|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Server shutdown in progress...|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0303: Stopping Tomcat.|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Stoping http11 protocol on 28080 server:type=ThreadPool,name=http28080|#]
[#|2006-02-10T13:01:04.899+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Stoping http11 protocol on 21043 server:type=ThreadPool,name=http21043|#]
[#|2006-02-10T13:01:04.915+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Stoping http11 protocol on 24848 server:type=ThreadPool,name=http24848|#]
[#|2006-02-10T13:01:05.008+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5051: Shutting down all J2EE applications ...|#]
[#|2006-02-10T13:01:05.008+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5122:EJB Timer Service shutdown at [2006/02/10 13:01:05]|#]
[#|2006-02-10T13:01:05.008+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5052: Application shutdown complete.|#]
[#|2006-02-10T13:01:05.008+0800|�x��|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException: MQ startup failed :[C4003]: �R�l�N�V���������������G���[���������������B - ���o java.net.ConnectException: Connection refused: connect
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:364)
at com.sun.enterprise.jms.JmsProviderLifecycle.onShutdown(JmsProviderLifecycle.java:433)
at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:400)
at com.sun.enterprise.server.PEMain.run(PEMain.java:233)
at com.sun.enterprise.server.PEMain.main(PEMain.java:172)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
|#]
[#|2006-02-10T13:01:05.008+0800|�v���I|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Server stopped due to Server startup failure.|#]
[#|2006-02-10T13:01:05.024+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=11;|sending notification to server...server|#]
[#|2006-02-10T13:01:05.024+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=11;|Server shutdown complete.|#]
Starting Sun Java System Application Server Platform Edition 8.0.0_01 (build b08-fcs) ...
[#|2006-02-10T13:01:10.743+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.4.2_06] from [Sun Microsystems Inc.]|#]
[#|2006-02-10T13:01:11.728+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2006-02-10T13:01:11.868+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2006-02-10T13:01:14.634+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|Creating virtual server server|#]
[#|2006-02-10T13:01:14.650+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|S1AS AVK Instrumentation disabled|#]
[#|2006-02-10T13:01:14.665+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-02-10T13:01:16.337+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [100]|#]
[#|2006-02-10T13:01:17.603+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Satisfying Optional Packages dependencies...|#]
[#|2006-02-10T13:01:17.790+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7008 : Initialized monitoring registry and listeners|#]
[#|2006-02-10T13:01:18.462+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5100:Loading system apps|#]
[#|2006-02-10T13:01:19.025+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
[#|2006-02-10T13:01:19.728+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]|#]
[#|2006-02-10T13:01:19.728+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!|#]
[#|2006-02-10T13:01:19.775+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0302: Starting Tomcat.|#]
[#|2006-02-10T13:01:19.916+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [adminapp] in virtual server [server] at [web1]|#]
[#|2006-02-10T13:01:20.041+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [admingui] in virtual server [server] at [asadmin]|#]
[#|2006-02-10T13:01:20.041+0800|�x��|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
[#|2006-02-10T13:01:20.041+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [com_sun_web_ui] in virtual server [server] at [com_sun_web_ui]|#]
[#|2006-02-10T13:01:20.056+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Starting tomcat server|#]
[#|2006-02-10T13:01:20.056+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Catalina naming disabled|#]
[#|2006-02-10T13:01:20.150+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.c &nHi,
Restarting the computer should have stopped the appserver.
To kill the appserver manually you can go to the command prompt
<install-dir>\Sun\Creator2\SunAppServer8\bin\asadmin.bat\stop-appserv
Thanks,
RK.
Maybe you are looking for
-
How do I find the serial number on my stolen ipad if I never wrote it down?
Need to file police report, it is not on file with applecare despite my purchasing two years, and not found at apple despite me calling everywhere!
-
Multiple RFC calls in same session
Hi All, I'm looking for a way to execute multiple RFCs (one after the other) within the same "session". The reason I need to execute them within the same session is because the initial RFCs store information in ABAP memory (EXPORT x TO MEMORY ID y)
-
WebService generation and polymorphic behavior
I have a simple problem. Class A has an attribute of type Class B Class B has 2 subclasses, Class C and Class D. (it holds only a reference to Class B, but at runtime will be assigned instances of Class C and Class D). Lets say Stateless EJB has a me
-
Impossible to set Security Mode in router configuration
Instantly reverts to "Disabled", at every selection of any option in list. Upgraded firmware; no change. WRT54G ver 5.
-
HT201272 If I purchased an HD version of a movie, can I download the SD version for free?
Want to play a movie through my laptop to a non-HD projector, which is apparently impossible. Do I have to PAY again to download the SD version?