Export op results in  error "EXP.EXE has encountered a problem and needs to

I have been working with Oracle Designer on an old computer (running Windows 2000 and an Oracle 10.2 database) and I am attempting to get it to run on a newer computer (running Windows XP and an Oracle 11g database (release 11.1.0.6)). Regarding the Designer version, I installed the same version (9.0.4.3) that was running on the old computer. On the new computer, features of the tool have worked (ER Diagrammer, DB Design Transformer, Design Editor), but the Export operation of the Repository Admin Utility did not work. When I attempted to run Export, the following happened:
(1) The "Save As" dialog was displayed (as expected).
(2) A EXP.EXE script window opened for the Export command and displayed the following:
Export: Release 9.0.1.5.1
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
(3) Immediately, an error dialog appeared stating "EXP.EXE has encountered a problem and needs to close. We are sorry for the inconvenience."
I am testing Export so that I can test Import, which is the operation I will need to load data from the old computer.
Any ideas how to fix this problem?
If it can't be fixed, are there other ways of transferring data from one repository installation to another?

add the 11g client to the pc and then modify the registry so that it points to the imp and exp from the 11g client.

Similar Messages

  • Crw32.exe has encountered a problem and needs to close

    approximately every 1 and 1/2 to two months I have to uninstall Crystal Reports XI and re-load release 2.  The program works fine then starts acting funny (cursor will not change when making text box longer/shorter, Can only make sections larger/shorter by putting the cursor over to the far left side of the report, etc)  When this starts happening, within one day I receive the error
    "crw32.exe has encountered a problem and needs to close. We are sorry for the inconvenience"
    I was able to see a thread in the Business Objects forum indicating there was a service pack to fix the problem.  Each time I search for service packs to install nothing comes up.  Does anyone know what this service pack is and where I might be able to find it.
    Thanks Much
    Donna

    Hi Jon
    Have you checked with DEP option?
    Right Click on My Computer ->Click on Properties->Click on Advance Tab-> Click on  on Settings in Performance Pane-?Click on Data Execution Prevention Tab ->Click on Turn On DEP option ->Click on Add button and browse for crw32.exe file.
    What is difference between mentioned two machine(Configuration)?
    Are you using dual monitor with Crystal Report?
    Have you checked with event viewer?It gives the detail description of error.
    Below are the steps for event viewer:
    Click on Start ->Run -type in eventvwr.
    Hope it will help you.
    Regards
    Asha.

  • Crw32.exe has encountered a problem and needs to close,pls help

    When I try to use a crystal report version 10.0 to querry from two data source at same time, I got following error:
    Crw32.exe has encountered a problem and needs to close. We are sorry for the inconvenience .
    I have a 8.5 version crystal report and it works just fine.
    The two data source are:
    MS access2003 DB and Sage Mas90 DB.
    I have tried on server 2003 and window XP. none of them works.
    Any help is appreciated.
    Jonathan

    Reporting off 2 datasources should work in CR10.
    I would suggest the following;
    1) Check the version of CR10 and apply SP5 if necessary
    2) Try using different connection methods, if you are using a native connection try odbc for example
    Possible workarounds woulr be to use a main report > subreport
    or
    In Access create a linked table to Mas90

  • Java.exe has encountered a problem and needs to close.

    I installed Oracle8i on my P4 then when I reboot I get the error "java.exe has encountered a problem and needs to close." even if I click on "don't report" if keeps popping up, anything to do to resolve this?
    Thanks.

    Hello...
    i had the same problem. then when i searched oracle documentation, it suggested as follows:
    1. go to your %ORACLE_HOME%\Apache\Apache\conf\httpd.conf
    2. comment out 2 lines that has
    include ....\jserv.conf
    include ....\oracle_apache.conf
    so your new line will be:
    #include ....\jserv.conf
    #include ....\oracle_apache.conf
    Those lines are at the end of the file.
    3. save the file.
    4. reboot your machine.
    that solution works for me.. hope it works for you too.
    GOOD LUCK!
    --Melani                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • "(program).exe has encountered a problem and needs to close. We are sorry for the inconvenience."

    Hi, I was using Tweetdeck for the past few months without any problems. Recently, the application still works fine.. it opens as normal, all posts I am following appear etc., but when I try to send a tweet the application closes and I get the error
    "tweetdeck.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
    I uninstalled tweetdeck and reinstalled it many times. Sometimes it would work for twenty minutes, other times not at all. I got fed up trying, so uninstalled it and downloaded Seesmic. This new application opened perfectly, all users I am following and their tweets updated perfectly, until again I went to post a tweet and it closes and I get the error
    "seesmic desktop.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
    As these are the only two applications I have used that give me this error, and are also the only two applications I have used that are related to Adobe AIR, I can only assume the problem is connected somehow?
    I was wondering if any of you might have any suggestions on how I could fix this? I am not the most tech saavy guy, so any help would be greatly appreciated as I am starting to lose patience with it!
    Thanks in advance.

    You might try uninstalling the AIR runtime and re-installing it. You might also try contacting the developers of these applications to find out whether the problem is related to issues they already know about.

  • LiveCam.exe has encountered a problem and needs to close. Constant Error. HELP PLEASE

    Alright so basically, my parents got a buy-one-get-one-free offer on webcams at christmas, and so they gave me one for my own as i lost my old one. Everything was working fine, seemed like a great camera.
    However, randomly one evening when i tried to open Live! Cam Center to record a video, it refused to open, instead giving me a small white box with the loading symbol inside (thats where live! cam center usually opens out into the UI) and a boz saying "LiveCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.".
    Now i thought that it was just a random one-off thing, but it happens EVERY time, WITHOUT fail. The cam works fine on MSN and skype etc, just when i try to record anything or manually take pictures , cam center doesn't work. And it doesn't seem to just be cam center, almost every software i've tried for just plain recording/capturing failed.
    Tried updating to latest drivers and software, tried using older versions, tried using the cam from my family pc (identical cam) - failed, tried using all different USB ports randomly, failed. I'm really desperate here now, i'm at the point where i'm almost going to give it away and buy a non-creative webcam cos its really annoying.
    My webcam is the Live! Cam Video IM Pro. Here's a copy of the error report from windows, its the same every time:
    AppName: livecam.exe AppVer: 2.2.3.0 ModName: ctvidcap2.dll
    ModVer: 2.2.3.0 Offset: 00002ca
    PLEASE HELP! IM DESPERATE >_

    See if there are any Crash Reports ID's saved.
    Type '''about:crashes''' in the Location Bar and hit Enter.
    Then open each Crash Report and once the report is loaded completely, copy and paste the URL of each report into the the '''''Post as Reply''''' box in this thread.
    IMO, seeing that you are using WinXP, you might be better off with the older Flash 10.3.183.90 version. Flash 11.0 and later have "improvements" that don't work on WinXP - only Vista and later. Adobe did continue to support and provide security updates for Flash 10.3 until a few months before WinXP went EOL back in April of this year.

  • An error occur indesign.exe has encountered a problem and needs to close.

    I am having trouble with adobe indesign CS5. Each time I opened my document an error occur indesign.exe has encountered a problem and needs to close. It got send report and don't send report to Microsoft. I have already used google web as a help and nothing came up. I have already tried to uninstall and re-install it but still same issue occured. Other Adobe products such as Adobe Dreanweaver CS5 and Adobe Flash CS5 work fine.I would greatly appreciated if you can walk me through. Thanks.

    Windows error reports are too vague to help us much. Did you get an error number?
    Is this happening now every time you start ID? That would likely mean the recovery data is damaged. You can find the InDesign Recovery folder in your user profile. This folder is probably hidden, so you'll need to set Windows Explorer to show hidden and system files, then look in the same directory as the location of InDesign Defaults, which you can find for your version of Windows in the information in this link: Replace Your Preferences
    Once you find the InDesign Recovery folder, either rename or empty it, then ID should start normally. If you file crashes again when you try to open it from the file menu please tell us as much information as you can.

  • Firefox crashes with error msg: plug-in container exe has encountered a problem and needs to close. Mod name: Mozallac.dl

    Firefox crashes with error messages: plug-in container exe has encountered a problem and needs to close. Details: Mod User 32.0.3.5379 Mod Name: mozallac.dl
    Why does this constantly occur?

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences'''<Enter> in the address bar
    Select '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • AS 10gR1 vs "Apache.exe has encountered a problem and needs to close" on XP

    I would really appreciate if somebody has solution for Windows error message popup box
    "Apache.exe has encountered a problem and needs to close".
    I have installed Oracle Application Server 9.0.4 Infrastructure (from 10gR1 AS) on XP laptop (I know it is unsupported)
    opmnctl.exe status show "UP" status for OID,OC4J but "Down" for HTTP_Server
    When I try to run
    opmnctl.exe versbose startproc ias_component=HTTP_Server
    I will always get "result=failure", text="failed to start a managed process after the maximum retry limit"
    and Windows message popup box
    "Apache.exe has encountered a problem and needs to close".
    (I have also 9i and 10g installed in separate Oracle homes).

    I have made 3rd attempt to re-install AS due "Apache.exe has encountere..and must be closed" error.
    I have succeeded after doing following:
    - unistall previous AS 9.0.4 (10gR1) install
    - disabled McAffee and firewall
    - changing NLS_LANG=AMERICA_AMERICAN.WE8ISO8859P15 prior installation
    - removed path to other OH (9i and 10gR2)
    - restart XP laptop
    - doing install AS 9.0.4 (10gR1)
    Now opmnctl.exe status shows everything works (including HTTP_Server :)

  • IMP.EXE has encountered a problem and needs to close

    Dear all,
    I have a dmp file which need to import into the oracle9i database. The dmp file size which is 1.6GB. Im using the imp cmd to run the import. When importing half way, i encountered an error which is IMP.EXE has encountered a problem and needs to close . Pls advice
    Thanks

    Dear Dean,
    Herewith the log file and print screen that the IMP.EXE hang issue occured while doing the imp.
    http://yfrog.com/bfimpexehangoj
    Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.1.0 - Production
    Export file created by EXPORT:V08.01.07 via conventional path
    Warning: the objects were exported by SYSTEM, not by you
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    export client uses US7ASCII character set (possible charset conversion)
    export server uses US7ASCII NCHAR character set (possible ncharset conversion)
    IMP-00046: using FILESIZE value from export file of 2097152000
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CNTRSTATUSUPDATETOCUST_SEQ" MINVALUE 1 MAXVALUE 99999999 I"
    "NCREMENT BY 1 START WITH 159 CACHE 20 NOORDER CYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "GENMESSAGINGERRORID_SEQ" MINVALUE 1 MAXVALUE 99999999 INCR"
    "EMENT BY 1 START WITH 22 CACHE 20 NOORDER CYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "S_AUDITTRAIL" MINVALUE 1 MAXVALUE 99999999 INCREMENT BY 1 "
    "START WITH 5238868 CACHE 20 NOORDER CYCLE"
    IMP-00015: following statement failed because the object already exists:
    Thanks,
    Rgs,
    Oraclebb

  • CrystalReports 2008 crw32.exe has encountered a problem and needs to close.

    Hi Guys,
    I just installed Crystal Reports 2008 and tried to use it, but every time I try to expand Create New Connection tree, in order to add some data to my report, program crashes and I receive message:
    u201Ccrw32.exe has encountered a problem and needs to close.  We are sorry for the inconvenience.u201D
    Thus anyone have a solution to this problem?

    Well,
    Each time Crystal Reports crashes I see three errors:
    1. Faulting application crw32.exe, version 12.0.0.549, faulting module unknown, version 0.0.0.0, fault address 0x06000030.
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 63 72 77   ure  crw
    0018: 33 32 2e 65 78 65 20 31   32.exe 1
    0020: 32 2e 30 2e 30 2e 35 34   2.0.0.54
    0028: 39 20 69 6e 20 75 6e 6b   9 in unk
    0030: 6e 6f 77 6e 20 30 2e 30   nown 0.0
    0038: 2e 30 2e 30 20 61 74 20   .0.0 at
    0040: 6f 66 66 73 65 74 20 30   offset 0
    0048: 36 30 30 30 30 33 30 0d   6000030.
    0050: 0a                        .
    2. Faulting application drwtsn32.exe, version 5.1.2600.0, faulting module dbghelp.dll, version 5.1.2600.5512, fault address 0x0001295d.
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 64 72 77   ure  drw
    0018: 74 73 6e 33 32 2e 65 78   tsn32.ex
    0020: 65 20 35 2e 31 2e 32 36   e 5.1.26
    0028: 30 30 2e 30 20 69 6e 20   00.0 in
    0030: 64 62 67 68 65 6c 70 2e   dbghelp.
    0038: 64 6c 6c 20 35 2e 31 2e   dll 5.1.
    0040: 32 36 30 30 2e 35 35 31   2600.551
    0048: 32 20 61 74 20 6f 66 66   2 at off
    0050: 73 65 74 20 30 30 30 31   set 0001
    0058: 32 39 35 64               295d   
    3. Hanging application crw32.exe, version 12.0.0.549, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 48 61 6e 67   ion Hang
    0010: 20 20 63 72 77 33 32 2e     crw32.
    0018: 65 78 65 20 31 32 2e 30   exe 12.0
    0020: 2e 30 2e 35 34 39 20 69   .0.549 i
    0028: 6e 20 68 75 6e 67 61 70   n hungap
    0030: 70 20 30 2e 30 2e 30 2e   p 0.0.0.
    0038: 30 20 61 74 20 6f 66 66   0 at off
    0040: 73 65 74 20 30 30 30 30   set 0000
    0048: 30 30 30 30               0000   
    However, I am not sure about their meaning.
    Regards,
    Vladimir

  • Disp+work.EXE has encountered a problem and needs to close ...

    Hi all
    I've installed NW 7.02 ABAP trial on a VM running with XP Pro english version, SP3.
    Via SICF also all services have been activated.
    When calling SE80 -> Web Dynpro -> (e.g.) WDR_TEST_MISC (or any other WD apllication) -> opening: Component Interface -> double click on INTERFACECONTROLLER -> selecting: CONTEXT -> and then select the 'Properties' tab ==>> the following ERROR occurs:
    => disp+work.EXE has encountered a problem and needs to close ... (seems to me to be a MicroSoft popup)
    After closing this popup, another one appears, telling me: 'SAP GUI for Windows 720 - NSP: Sap Systemnachricht; Work process restarted; session terminated'.
    That's the end of this session :-((
    This error occurs only when I try to call the properties of the Interface context!
    Regards, Stefan

    Hi Stefan,
    I had this problem yesterday while using SGEN after a fresh install of NW 7.02 (64 bit).
    I forgot to switch of the DB Log and it ran full (I think in earlier versions of the preview installtion MaxDB Log was set to overwrite mode by default which isn't the case with this installation). Anyway, the log ran full, disp+work died and after that it was imposible to restart the system because the dispatcher died shortly after it had started.
    Maybe you check your DB with the database manager.
    Good Luck
    Markus

  • Indesign.exe has encountered a problem and needs to close.

    After formatting my hard drive and reinstalling InDesign CS3, I am not able to open the program.
    When I click the shortcut to start the program, it starts to load for about 10-15 seconds, then freezes and gives me this error message:
    "Indesign.exe has encountered a problem and needs to close."
    I tried reinstalling over the first installation. Then I downloaded the latest updates (Ver. 5.0.4)
    Then I rebooted the computer. Same problem. Rebooted two more times. Same problem.
    Uninstalled the program. Reinstalled. Rebooted. Same error msg. Installed update to Ver 5.9.4, same error msg.
    Rebooted again, same error msg.
    What's next? I am at a loss.
    Thank you

    Ok, I did the following with no luck yet...
    Deleted fonts that had been dragged into the Windows Fonts folder.
    Searched for adobefnt*.lst, found 6 files, deleted them.
    Uninstalled InDesign again.
    Downloaded CleanScript.
    Did CleanScript Method 1 as described in ReadMe file:
        Uninstalled InDesign
        Went to documents and settings\username\application data\adobe\patchlogs
        deleted adobeInDesignCS35.0.log
        deleted adobeSingCS3 0.1.log
        deleted adobeLinguistics CS3 3.0.0.log
        Went to documents and settings\username\local settings\application data\adobe
        Looked for files to delete with CS3 in the name, but did not see any.
        Installed InDesign
        Rebooted
        Would not start
    Did CleanScript Method 2 (same as you suggested)
        Uninstalled InDesign
        Ran Clean Script
        Reboot
        Run MSconfig
        turned off everything not marked as "essential"
        reboot
        Tried to install ID
        Error Msg: Windows Installer Service needs to be running
        Ran MS config/ enabled Installer service
        reboot
        Installed ID
        Tried to start it, would not start, got this error msg:
              Licensing for this product has stopped working. You cannot use this prodict at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT...
        Started MSconfig/ enabled all the old services
        reboot
        Tried to start ID, got same Licensing error msg
        Reinstalled ID on top of the old installation
        Tried to start ID
        Got the OLD error msg
             InDesign.exe has encountered a problem and needs to close.

  • Crw32.exe has encountered a problem and needs to close during table link

    I am in the process of evaluating the Crystal Reports 2008 product to create reports on data stored on our IBM AS400 system. When I select two or more tables on the Database Expert window; then click on the Links tab I receive the error message. If you only select one table the product does not crash. u201CCrw32.exe has encountered a problem and needs to close.u201D
    Error signature
    AppName: crw32.exe
    AppVer 12.2.0.290
    ModName: mfc80u.dll
    ModVer: 8.0.50727.762
    Offset: 0005ad30
    Installed applications
    Microsoft Windows XP Service Pack 2
    IBM System i Access for Windows, Version 6 Release 1 Modification level 0 Service level SI31390
    Crystal Reports 2008, CR Developer, Version 12.2.0.290, Evaluation Version
    ODBC Data Source to the iSeries using the iSeries Access ODBC driver

    RESULTS
    Report for crw32__PID__932__Date__05_04_2010__Time_04_17_34PM__453__Second_Chance_Exception_C0000005.dmp
    Type of Analysis Performed   Crash Analysis
    Machine Name   TST100
    Operating System   Windows XP Service Pack 3
    Number Of Processors   1
    Process ID   932
    Process Image   C:Program FilesBusiness ObjectsBusinessObjects Enterprise 12.0win32_x86crw32.exe
    System Up-Time   1 day(s) 06:15:05
    Process Up-Time   00:01:40
    Thread 0 - System ID 492
    Entry point   crw32+83c818
    Create time   5/4/2010 4:15:55 PM
    Time spent in user mode   0 Days 0:0:0.328
    Time spent in kernel mode   0 Days 0:0:3.46
    Function     Arg 1     Arg 2     Arg 3   Source
    mfc80u!CWnd::SetWindowPos+3     00000000     00000000     0000003c   
    crw32+637594     0015c438     030161d0     0000004e   
    mfc80u!CPropertyPage::OnNotify+94     00000000     0012ef18     0012ebc0   
    mfc80u!CWnd::OnWndMsg+9c     0000004e     00000000     0012ef18   
    mfc80u!CWnd::WindowProc+22     0000004e     00000000     0012ef18   
    mfc80u!AfxCallWndProc+a3     00000000     001f02a2     0000004e   
    mfc80u!AfxWndProc+35     001f02a2     0000004e     00000000   
    mfc80u!AfxWndProcBase+54     001f02a2     0000004e     00000000   
    user32!InternalCallWinProc+28     7830fe2f     001f02a2     0000004e   
    user32!UserCallWinProcCheckWow+150     0015c268     7830fe2f     001f02a2   
    user32!SendMessageWorker+4a5     00723d68     02711a58     00000000   
    user32!SendMessageW+7f     001f02a2     0000004e     00000000   
    comctl32!CCSendNotify+748     0012eed8     ffffff38     0012ef18   
    comctl32!SendNotifyEx+57     001f02a2     0017020e     ffffff38   
    comctl32!_Ppd_SendNotify+2b     064172c8     00000001     ffffff38   
    comctl32!PageChange+2e7     064172c8     00000001     0012f21c   
    comctl32!PropSheetDlgProc+2b3     0017020e     0000004e     00003020   
    user32!InternalCallWinProc+28     773dc1ca     0017020e     0000004e   
    user32!UserCallDlgProcCheckWow+146     0015b1b0     773dc1ca     0017020e   
    user32!DefDlgProcWorker+a8     00000000     0000004e     00003020   
    user32!DefDlgProcW+22     0017020e     0000004e     00003020   
    user32!InternalCallWinProc+28     7e423d3a     0017020e     0000004e   
    user32!UserCallWinProcCheckWow+150     0015b1b0     7e423d3a     0017020e   
    user32!CallWindowProcAorW+98     7e423d3a     0017020e     0000004e   
    user32!CallWindowProcW+1b     7e423d3a     0017020e     0000004e   
    mfc80u!CWnd::DefWindowProcW+42     0000004e     00003020     0012f5b8   
    mfc80u!CWnd::WindowProc+39     0000004e     00003020     0012f5b8   
    mfc80u!AfxCallWndProc+a3     00000000     0017020e     0000004e   
    mfc80u!AfxWndProc+35     0017020e     0000004e     00003020   
    mfc80u!AfxWndProcBase+54     0017020e     0000004e     00003020   
    user32!InternalCallWinProc+28     7830fe2f     0017020e     0000004e   
    user32!UserCallWinProcCheckWow+150     0015b1b0     7830fe2f     0017020e   
    user32!SendMessageWorker+4a5     0070ab90     02711a58     00003020   
    user32!SendMessageW+7f     0017020e     0000004e     00003020   
    comctl32!CCSendNotify+c20     0012f644     fffffdd9     00000000   
    comctl32!SendNotifyEx+57     00000000     001201e2     fffffdd9   
    comctl32!ChangeSel+208     001201e2     00000001     00000001   
    comctl32!Tab_OnLButtonDown+cf     063ab958     00000049     0000000a   
    comctl32!Tab_WndProc+4c8     001201e2     00000201     00000001   
    user32!InternalCallWinProc+28     7740f03f     001201e2     00000201   
    user32!UserCallWinProcCheckWow+150     0015b1b0     7740f03f     001201e2   
    user32!DispatchMessageWorker+306     0015c468     00000000     0012f874   
    user32!DispatchMessageW+f     0015c468     00000000     0012f954   
    user32!IsDialogMessageW+572     0017020e     02720400     0012f954   
    mfc80u!CWnd::IsDialogMessageW+2e     0015c468     7832e88c     0015c468   
    mfc80u!CWnd::PreTranslateInput+29     0015c468     0015c468     0015c468   
    mfc80u!CPropertySheet::PreTranslateMessage+ca     0015c468     0015c468     02f91008   
    mfc80u!CWnd::WalkPreTranslateTree+1f     000f019c     0015c468     0015c468   
    mfc80u!AfxInternalPreTranslateMessage+3b     0015c468     78348336     0015c468   
    mfc80u!CWinThread::PreTranslateMessage+9     0015c468     7834824b     0015c468   
    mfc80u!AfxPreTranslateMessage+15     0015c468     00000000     0012f954   
    mfc80u!AfxInternalPumpMessage+2b     508aafcf     0300d458     00000000   
    crw32+52530e     0300d458     00000000     00000001   
    0x508aafcf     00000000     00000001     00df598c   
    0x0300d458     00000001     00df598c     00000001   
    MFC80U!CWND::SETWINDOWPOS3In crw32__PID__932__Date__05_04_2010__Time_04_17_34PM__453__Second_Chance_Exception_C0000005.dmp the assembly instruction at mfc80u!CWnd::SetWindowPos3 in C:WINDOWSWinSxSx86_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_b77cec8emfc80u.dll from Microsoft Corporation has caused an access violation exception (0xC0000005) when trying to read from memory location 0x00000050 on thread 0
    Module Information
    Image Name: C:WINDOWSWinSxSx86_Microsoft.VC80.MFC_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_b77cec8emfc80u.dll   Symbol Type:  PDB
    Base address: 0x782e0000   Time Stamp:  Sat Jul 11 22:31:52 2009 
    Checksum: 0x00114d13   Comments:  
    COM DLL: False   Company Name:  Microsoft Corporation
    ISAPIExtension: False   File Description:  MFCDLL Shared Library - Retail Version
    ISAPIFilter: False   File Version:  8.00.50727.4053
    Managed DLL: False   Internal Name:  MFC80U.DLL
    VB DLL: False   Legal Copyright:  © Microsoft Corporation. All rights reserved.
    Loaded Image Name:  mfc80u.dll   Legal Trademarks:  
    Mapped Image Name:     Original filename:  MFC80U.DLL
    Module name:  mfc80u   Private Build:  
    Single Threaded:  False   Product Name:  Microsoft® Visual Studio® 2005
    Module Size:  1.06 MBytes   Product Version:  8.00.50727.4053
    Symbol File Name:  c:symcacheMFC80U.i386.pdb7C831002AB274BF6938D1DEC58BF11A1dMFC80U.i386.pdb   Special Build:  &

  • HPLaserJetService.exe has encountered a problem and needs to close.

    I continue to recieve an error message that states the following: HPLaserJetService.exe has encountered a problem and needs to close.  Right before the message appears my pc slows down and sometimes programs that i am in shut down.
    I have not issues with my HP Laser printer.

    Do you mean CP1525nw? If so here is a link to the driver downloads for that printer. I would recommend going through your computer thoroughly and deleting any instance of the printer or it's software and then re-adding it from the link below :
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052980
    Let me know how that goes and I will get right back with you!
    -Spencer 
    PS I hope that the weather where you are is as wonderful there as it is here! Have a great day! 

Maybe you are looking for

  • Mountain Lion: Copying mailbox from one user to another user on the same mac

    When I bought the mac I had only one email address.  Since then I have accumulated 3 more addresses. I created another User on the same MAC to seperate the personal emails from the 3 new email addresses, that I use for business.  There are some mailb

  • How to add empty folder in a jar file ?

    Well I know how to add files in a jar file but I cannot add empty folder. I would like to do this so that when I get back the jar file I can have all the structure of the save main folder. I also test that it is possible to do that on line with the "

  • Ipad not being not being "seen" by itunes when plugged into mac book pro. Troubleshooting guide didn't help.

    Hello, I just recently got my macbook pro (2009, 15 inch) repaired. While it was being repaired I bought an ipad and was synching it to a seperate computer. However, now when I plug in the ipad to the macbook, itunes does not see the ipad and the ipa

  • Process to Move Stock from Unrestricted to Restricted / Quality Stock

    Dear All, In one of my plant Quality Management Module is not implemented, but MM module is live and manually using Mov. Type: 321 stock is transferred from Quality to Unrestricted and vice-verse. My requirement are as follows: 1) How can stock statu

  • Unlock iphone

    I still have my old Iphone 3. My contract expired last year and I purchased a new iphone 4. I would like to unlock my old iphone so I can use it when I am in Europe with any other sim card. Every cell phone I owned could be unlocked after the contrac