Export or Share part of your movie

So in FCP X you can not mark an IN and OUT in your timeline and export part of your movie? What is the deal with that?
any ideas or suggestions on going around that, I need to brake the movie into parts and export them, do I need to bring it into FCP 7
Any Ideas ?

Thanks for the update Tom but what has happened to my post?
I posted the link for the thread containing your answer but just your answer has appeared, almost as though you had responded to the OP, apart from the date?
Weird!
Is there any way of removing the compound clip from a project and returning it to its original status?
Somehow I seem to be posting in 2 different threads!
Message was edited by: Ian R. Brown

Similar Messages

Any way to increase audio level of your movie?

I've uploaded a taped video into iMovie and when I play it back, the volume level is too low (I can hear it but it's not loud). I've increased the system pref vol, the vol level, and the volume level in iMovie so everything has been turned all the way up.
I saw where you can extract the audio. What can you do with it when you extract it? Incresase it? And if you can increase it, how would you add the audio back to the movie?
What I want to know is, is there another way to increase the volume if you've turned up all the computer volume controls and it's too low?
Mark

The best place to increase / adjust audio levels assuming the source video footage has something to work with is in the video editing app. Have you tried posting this question to the iMovie forum?
If your iMovie has low audio levels to start with then this will also be reflected w/in iDVD if no adjustments are made beforehand. Hope this makes sense.
Also check in the iMovie Help Menu if you haven't already:
I can't hear the audio in my movie
If you can't hear some or all of the audio in your movie, here are some things you can check:
Make sure your computer's volume is turned up. Use the speaker controls on your keyboard or the volume slider in the menu bar.
Use the volume slider below the iMovie monitor to increase the movie volume.
Make sure the audio checkbox is selected for the track you want to hear. The audio checkbox is to the right of each track in the timeline viewer.
If the audio checkbox is selected, then choose View > Show Clip Volume Levels and see if the audio levels for the tracks are set to a level that can be heard.
Making your movie louder or softer
If you find that all or part of your movie is too loud or too soft, you can adjust the volume of your movie in the timeline viewer. You can increase or decrease the volume of the entire movie or just specific audio clips. For example, at a certain point in a video you might dramatically increase or decrease the volume of accompanying music.
IMPORTANT: These instructions are for setting the volume of video that people will hear as they play your movie. If you only want to adjust the volume of your computer's speakers, see "Adjusting the volume of your computer in iMovie HD" below.
To make your movie louder or softer:
Click the Timeline Viewer button (shown above).
Select the clip or clips whose volume you want to change in the timeline viewer.
Tip: To learn how to select multiple clips, see "Selecting clips" below.
Click the clip volume button (shown below), and then drag the slider to adjust the volume.
Tip: You can also type a new percentage in the field next to the clip volume button to adjust volume.
You can also make finer audio adjustments within a clip. For more information, see "Fading audio up or down."
Message was edited by: SDMacuser

I am still uing iMovie09. When I try to export movie some of share parts which are fine during editing, become very shaking. What should I do?

I am still uing iMovie09. When I try to export movie some of share parts which are fine during editing, become very shaking. What should I do?

Thank you so much...
1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.

Export part of a movie

How do you export part of a movie to Quicktime after setting in and out points?
Thanks for your help

I believe this is correct. Although I haven't had the need for Compressor yet (therefore haven't bought it yet), as far as I can tell and have heard, you export the entire thing into Compressor at which point you can mark in and out points for the compression and export of your final product. It can't be done in FCPX alone, unless you duplicate your project and delete chunks of it to export only the parts you want.

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox.

How do you export your movie using idvd? I keep getting error messages and notices that I do not have enough space to transfer to a dvd.

How do you export your movie using idvd? I keep getting error messages and notices that I do not have enough space to transfer to a dvd.

Can you give us the steps to re-create the problem, and the exact wording of the error message you are getting please.

Copy and Share Part of Video Clip

I have captured family VCR clips to digital files (.avi), imported them to Premiere Elements 9, and created DVD movies. I would like to copy a few seconds of a clip(s), and share them as mobile phone video messages and email attachments. I would like to do this as easily as possible, without altering the existing project files. Can I simply copy and paste a small section of the timeline? The help file only talks of splitting clips, which seems to be a meat cleaver approach. Thank you.

Welcome to the forum.
The easiest way to Export/Share parts of a Timeline, is through the use of the WAB (Work Area Bar). Most Export/Share formats support doing so with just the Work Area, but perhaps not 100%. Check that out for the Share>Mobile Devices settings.
Here is a look at the WAB:
Good luck,
Hunt

"Send to iPod ... your movie will be compressed"-- copy or original ?

I like to save 10 minutes or more when sharing a work-in-progress to my iPhone, but it's hard to interpret what "your movie will be compressed" actually means.
The project itself ?, or merely the "copy" that ends up in iTunes ?
I've been creating a copy of the project first thing, before any sharing or compression and such, but am I wasting 10 minutes or more on an unnecessary step ?
Does the sharing alter the original project in any way ?

Hi
"Sharing/Exporting to iDVD" - from iMovie up to version HD6 has had two bad effects
in my experience. Especially if it contains photos and No Ken-Burn effect are applied.
• DVD - result is very pixelated - near useless
• ORIGINAL iMovie project is harmed - all photos has to be re-imported and re-edited
to mend the project
I Export out as full Quality QuickTime to be used in iDVD.
So - Share/Export can at least in this case influence original iMovie project !
Why not on export to iPod
BUT - I used that one and never observed this effect - may be not looking for it.
Yours Bengt W

How can I cut off part of a movie in DVD Studio Pro created in Quicktime?

I created a project in iMovie, then exported it to a Quicktime file to import into DVD Studio Pro. Now that I have imported it to DVD Studio Pro, it is too big to burn onto 1 disc. I would like to be able to chop off a few minutes of the movie in DVD Studio Pro, but Im not sure how to do it. I am assuming there is some way to chop off part of a movie in the Track editor - can anyone please help with this?
Thanks

Yes, you can trim a track, but it is a rudimentary control, and not frame accurate.
I think Hal has oversimplified: the process is frame accurate - it is just that your choice of edit points is limited to 'I frames' only. 'I frames' occur about every 12 frames, or 1/2 second, for a typical PAL mpeg2 video track, and every 15 frames, or 1/2 second, for a typical NTSC mpeg2 video track.

Export gives "Unable to create" error,Can't EXPORT or SHARE modified images

I am running iPhoto 8.1.2 and I cannot export or share any images I modify.
Upon editing images (cropping or enhancing color profile), I am unable to drag and drop images to my desktop (gives a "∅" symbol) which I used to do all the time. I cannot export them - iPhoto gives an error: "Unable to create" filename error...
If I look at the "Show file" and verify the contents of the folder, none of the images I have modified appear there. If I look at "Show original file" all the original files are there but do not have my edits/cropping, etc. Where are my modified images going and how can I get to them? iPhoto seems like it is getting Alzheimer's or something...
I have tried closing and re-opened iPhoto and all the images thumbnails appear to be ok with my updated crops/enhancements. Double-clicking and opening them opens files with the correct edit/enhancements. Everything seems ok until I try to export or share any of the modified photos.
I tried rebuilding iPhoto and selecting the first 4 options but after the rebuild the problem still persists...
None of the files that I cropped/enhanced appear in the "Modified" folder for that date. There are some files there, but they appear to be files that I deleted!
So, where are my cropped/enhanced photos going??? iPhoto shows them ok in the Events, etc. but they are not in the "Modified" folder and I cannot export, drag/drop, email or share them...
This has been happening to me for awhile now and it is very frustrating. iPhoto is ok so long as I don't do any cropping or enhancing. If I do that, then it gets all screwed up...
I know that I can use something like "iPhoto Library Manager" to rebuild stuff but I don't want to lose any of my data. I have done extensive work with faces, places, attributes, names, etc...
I JUST WANT iPHOTO TO WORK LIKE IT IS SUPPOSED TO AND LIKE IT USED TO!
Thanks,
Steve

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair Library permissions.
If the permissions have been mucked up somehow, it's likely that your edits have not been saved.
If the fails:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I can't export or share my project.

Okay, I am a beginner and trying my best. But right now my best is definately not good enough.
I am using the 30-day trial of Final Cut Pro X with the latest updates. It's only limitation is the 30-day trial so I should be able to export and share my project.
After I mark the project and then click on the share-symbol->export I get the following message: "This item cannot be shared while it is still referencing media on the camera." I have also tried file->share but that menu is in gray and I can't click the options. If I click on any of the clips in the events window I can export them but that's not what I want to do.
I can't remove the trial and download it again since I can only download it once.
I suspect it might have something to do with my organizing the clips and the original files. My originals are in a folder on the desktop and that is the location I import media from into Final Cut's events.
If you have any ideas, please help me out.
Sincerely,
Edith

Thanks for your fast reply!
I had the copy to event function checked on. The folder is a regular folder that I created on my desktop. I have put other folders inside that folder, one of which is called "FILM" and contains 10 camera archive folders that the camera (Sony NEX-5N) created for me. That is how the footage was automatically uploaded onto my MacBook Pro. Each of the camera archive folders contains multiple clips.

How do you get your iPhone to stop keeping records your movements?

According to a recent article in Gizmodo (http://tinyurl.com/3dcy2jw) records of iPhone and iPad users' movements have been stored on their phone and computer since June 2010, and could be easily accessed if your device were stolen.
From the article:
"The privacy startle, apparently enabled by this summer's iOS 4 release, was discovered by two security researchers, one of whom claims he was an Apple employee for five years. They're equally puzzled and disturbed by the location collection: "By passively logging your location without your permission, Apple have made it possible for anyone from a jealous spouse to a private investigator to get a detailed picture of your movements," they explain. All it would take to crack the information out of your iOS device is an easy jailbreak. On your computer, the information can be opened as easily as JPEG using the mapping software that the security experts have made for download."
The Guardian has also written a story about this: http://www.guardian.co.uk/technology/2011/apr/20/iphone-tracking-prompts-privacy -fears
How can this "feature" be disabled? It is an invasion of privacy and poses serious security concerns.

Actually you agreed to let Apple track your location history. From the iTunes Terms and conditions, I offer this extract:
Apple and our partners and licensees may collect, use, and share precise location data, including the real-time geographic location of your Apple computer or device. This location data is collected anonymously in a form that does not personally identify you and is used by Apple and our partners and licensees to provide and improve location-based products and services. For example, we may share geographic location with application providers when you opt in to their location services.
So not only does your iPhone and the unencrypted (by default) backup have this information, so does Apple and partners. It's not GPS accurate and not a result of using location services. It comes from cell tower and WiFi triangulation. You would have to go into Airplane mode to protect your location privacy.

How can I export to a web page with movies?

Hello,
I just noticed that when I exported a folder of pictures and movies to a web page, only the pictures showed up. Is there a way I can use the export to web page feature and see my movies?
Thanks!

Are you using iWeb to create your web page? If so then the only options from within iPhoto for exporting are a photo page or blog page. You need to export only the photos and once in iWeb create a separate movie page and import that movie to that specific page via the Media button at the bottom.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

Have you seen my User Tipp here
"Movie Magic" with Stills and Dissolve
When you 'prep' your stills in any 'picture app', you can do a lot of marvel by simply applying dissolves.
In your case, I would create a white document (in Pixelmator, Keynote, Photshop, online at pixlr.com, whatever ...) and another with your logo (and further more ones with additional logos). Drag the jpgs into your iMovie Project and apply dissolves - tadahh! - logos appear on white.

Aperture 3 problem export (or share) photos via outlook

I have Aperture 3.5.1; Outlook for Mac 2011 version 14.3.9
When I try to export (or share) photos via email using Outlook I can see the little wheel on Aperture spin saying "exporting" however it does NOT open a new email window and I cannot find out where the photos have gone. In Aperture preferences I have set Outlook; Tiff 8 and sRGG; 300dpi and medium size.
It used to work however I simply cannot figure out the problem. I can export to desktop and move them that way but extra steps and unnecessary. Any help great appreciated.
Thanks

There are some known problems with Outlook Mac 2011 in Mavericks 10.9.1 - see: http://www.macwindows.com/Mavericks-10_9_1-fix-OS-X-email-snafus-but-Outlook-not -mentioned.html
Since I don't use Outlook as Mail client, I don't know, if the Mavericks Update to Mavericks 10.9.2 fixed this. But it cannot hurt to update, since this update included bug fixes.

Export or Share part of your movie

Similar Messages

Maybe you are looking for