Export PDF creates 0kb file and Print Error.

By "Print Error", I mean a simple pop-up window with the pages logo and the sentence "Print. Error while printing" even though I haven't asked for anything to be printed. The resulting pdf file is zero k in size and useless.
I had this problem in iW '06 and thought that '08 might fix it. No dice though.
Deleating prefs did not fix the issue. ['06 or '08]
Anyone? Thanks.
CSK
Burbank, CA

I suspect that you've turned off a couple fonts with Font Book (or perhaps removed them from the Fonts folder). Pages expects certain fonts to exist - even if we don't use them or even want them.

Similar Messages

I just started a free trial of the Adobe XI product that allows me to create an editable PDF. I'm done creating the form and ready to export it. When I click Export PDF from the File menu, it says Adobe encountered an unexpected error. What am I doing wro

I just started a free trial of the Adobe XI product that allows me to create an editable PDF. I'm done creating the form and ready to export it. When I click Export PDF from the File menu, it says Adobe encountered an unexpected error. What am I doing wrong?

Good to know — there is no such application as "Adobe XI".
"Adobe" is the name of the company.
"XI" is indicative of the use of either Acrobat XI or Reader XI.
Neither Acrobat XI Pro (for which Adobe provides a free, fully functional 30-day trial) nor Adobe Reader XI (the free to download and use PDF viewer that Adobe provides) have an "Export PDF" entry under "File".
"Export PDF" only is present in Adobe Reader XI over on the right on the "Tools" panel.
The "Tools" panel provides a way for a user of Adobe Reader XI to connect to various By Subscription online services (gotta pay eh).
Export PDF is one of these. A subscription lets you send a PDF file to the online internet service (aka "cloud" service). The service then exports to a supported file format (Word / Excel / ...) and the user selects / directs where the output file is to be saved on the user's local machine.
Of course to use any of the online subscription services one must have an active (paid up in full) subscription to the service.
So ---- As described the puzzle pieces don't fit eh.
What specific Adobe (the company) applications are you using?
Acrobat XI Pro? Adobe Reader XI? Both?
Be well....

Cannot create PS file and PDF in Framemaker 9

I'm using Version 9.0p196.
When I used the "Advanced Save" to save an .fm file to a pdf, I got the message "The specified printer 'N/A' cannot be found, use printer 'Adobe PDF' instead. After I click OK, it said "cannot create PS file", and "failed to create PDF file.
It worked fine before.This problem was occurred after I copied some fonts to the following locations:
C:\Windows\Fonts
and
C:\Program Files\Adobe\FrameMaker9\fminit\fonts\adobe
Those fonts are:
timesbd.ttf
times.ttf
HelveticaWorld-Regular.ttf
HelveticaWorld-Italic.ttf
HelveticaWorld-BoldItalic.ttf
HelveticaWorld-Bold.ttf
I have no idea if that's the cause of the problem. Does anyone know?
By the way, the FM 9 is running on XP.
Thanks,
Meggie

Meggie,
You may or may not have created a mess with fonts. I would try not to have duplicate fonts, it is totally sufficient to have them in C:\Windows\Fonts.
But your FrameMaker verson is definitely four (4) patches behind. The current version is 9.0.4 (9.0p255) and you can get the updaters here:
http://www.adobe.com/support/downloads/product.jsp?product=22&platform=Windows
You have to install them one after another.
Some of the patches improved the Save as PDF feature.
For further communication, please add your OS version and Acrobat version.
- Michael

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Adobe reader (11.3.2) PDF's on ipad and getting error that the file is corrupt!!

i have the latest Adobe reader from the app store (11.3.2) however i am struggling to open PDF's on ipad and getting error that the file is corrupt!!
any help or suggestions welcome

Would you describe how you transferred the PDF file to your iPad and iPhone? Did you send it as an email attachment and open it on your iPad and iPhone?
The file may have been corrupted by Apple Mail, which is a known problem. Please see Problem #1 in the FAQ document How to avoid known PDF email attachment problems.
Would you try some experiments so that we can troubleshoot the problem? During the experiments, please use cloud storage (e.g. Acrobat.com, Dropbox, Google Drive, etc.) and avoid sending the PDF file as an email attachment.
Rename the corrupted/damaged PDF file on your iPad. For example, add "_damaged.pdf" to the file name.
Upload the corrupted/damaged PDF file to the cloud storage of your choice.
Download the corrupted/damaged PDF file from the cloud storage to your Windows or Mac desktop computer.
Open it in the desktop version of Adobe Reader XI for Windows or Mac.
Does Adobe Reader XI on your desktop computer display an error message?
Upload the (good) PDF file on your iPhone to the cloud storage.
Download the (good) PDF file from the cloud storage to your iPad.
Open it in Adobe Reader on your iPad.
Does Adobe Reader on your iPad display an error message?
We can investigate further based on what you will find.
Thank you for your help.

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank you

Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry

E3000 file and printer sharing issues

Yes, there is at least one other thread on this but it looked a bit stale.
Last Friday I replaced my BEFSR41 router and WRT54G wireless access point (which had gone brick on me) with an E3000.The E3000 is configured as a DHCP server at 192.168.168.65 with a scope of 66-115. The only other non-default setting is that I opened up the custom port for my slingbox.
Prior to making the switch, I had several network shares on an XP desktop that I used frequently from my Vista laptop. Now, however, I can no longer even "see" any other computer from any of the computers on the network, much less access their shared folders. In other words, if I view the network from any of these machines, the only machine that shows up is the machine itself. Everything else (internet access, slingbox, a print server) is working just fine.
One of the suggestions in the other thread was to turn off Norton Internet Security, which is of course not a viable option. However I did check the settings, relaxed the network default to "Shared", and raised the XP desktop to "Full Trust". This had no effect.
I pinged the various computers, and was able to do so by their IP addresses, but not by their computer names (that worked with the old router). On a hunch, I tried creating a mapped drive, and that also worked when I used the IP address, but not when I used the computer name.
So - there's nothing wrong with the network configuration, or with how the shares are set up, and Norton isn't the problem. The only problem seems to be that names aren't being resolved, which could be affecting windows discovery, too. Did the BEFSR41 provide some local DNS functionality by default, and the E3000 doesn't? Is there an option I need to enable? If so, I can't find it. Perhaps I should explicitly add the E3000's internal IP address as a third nameserver??
A note on the "support" I tried to get before I turned to the forums: The "Chat agent" asked a bunch of questions, misunderstood my configuration and my problem, and once he finally did understand said "we don't support file and printer sharing". It took me several more questions to learn that he really meant that the Chat facility isn't the place for these questions - I had to call the 800 number. I did that, and after several minutes on hold, reached an agent. After going through everything again, and with the rep going on hold several times to "speak to his supervisor", he said it was "beyond his competence". I was eventually told I had to call another FEE-BASED service. I told him that was unacceptable.

Ok, another update and possibly some clues.
I was curious why at one point, when all the computers were in Workgroup2, that "Workgroup" still showed up in Explorer under the list of networks, but only on the two XP machines. Netscan showed this group association as well, which I then realized was the E3000 itself, in its role as a [I]potential[/I] NAS server. However there was no storage device attached.
Could this in itself cause the access error? If so, should users be advised that if they don't plan to host any storage, that they should to go to the E3000 Storage Administration page and change the workgroup name to something other than their actual workgroup name?
In my case, I changed it to "Workgroupx", though perphaps something like "StorageGroup" would be more meaningful, especially if the Workgroup computers could still access any storage I might install in the future.
Anyway, I repeated my original approach (after the above change and a router reboot), and at least got my original Workgroup reestablished to the point where the XP machines not longer get access errors, and most machines can access the shares on the XP desktop. The steps I used on each machine were:
remove any shares I had set up on any folders
uninstalled the File and Printer Sharing service
Accessed Computer Name properties page to change the workgroup name
Shut Down
After all 4 were done, I reversed the process:
Started computer (now coming up in new Workgroup)
Reinstalled File and Printer Sharing service
Checked visibility
At this point, the XP machines could see each other, and the Win7 and Vista machines could see each other, but initially these two cliques wouldn't interact.
Next I re-added the shared folders on the XP desktop, and the XP netbook could see and access them. After about an hour, the Win7 machine joined this clique, and could also access the shares. But six hours later, the Vista machine is still clueless. Netscan shows everything of course, and I used it to set up a mapped drive on the Vista machine to one of the shared folders.
Other possibly relevant facts:
The was all working fine with the BEFRS41/WAP54G combo
I can ping all machines by IP address, but not by name
On the Vista machine I can set up mapped drives to the XP's shared folders, but again, only by IP address.
At one point I removed NWLink from the XP desktop. Now, nbtstat -r only shows the printserver's name being resolved.
The two XP machines, being SP3, lack the LLTD responder.
So,
Is it possible the NetBIOS in NWLink was providing some kind of name caching? If so, should I reinstall the protocol driver (I don't think it is available on Win7)?
Should I request and apply the KB922120 hotfix to get LLTD onto the XP machines?
Perhaps in the morning, "by name" access will have returned, as it did on my first go-round. Needless to say this has been a real pain, what with all the reboots required. At least now I remember to hit F8 so I can select Safe Mode with Networking...

File and Printer Sharing Problem with WRT54G

I am currently having problems sharing files over my network. My setup consists of:
3 laptops (wireless)
1 desktop (wired)
WRT54G V6.0 router with firmware version 1.00.9.
All of the computers have File and Printer Sharing enabled, unique names, and are on the same workgroup. However none of the computers can see one another. When I try to view workgroup computers for my network places, the explorer window stops responding for about 30 sec. and then spits out a dialog with the error:
"Workgroup is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available."
I think that this problem has something to do with the router, as I have been successfuly sharing files and a printer with these settings using a microsoft 802.11b router for over a year. After purchasing the linksys and swapping it out with my old router, filesharing no longer functions.
I have spent a little time browsing the forums and have seen other posts from people with simmiler problems, but was unable to find any solutions.
Any help would be much appreciated.
Thanks.

I'm having the same problems as you are, I have 2 computers on wired the other wireless the router is in between and I can't access from either side, although I can ping and remote connect but just cannot share files across the network. I have looked all over the forums too and there saying to ditch linksys and do something else.
Its not you thats caused this it is the firmware and the router that have the problems.
My Specs:
WRT-54G
v5.0
That new firmware update 1.00.9 just isn't working right. I might downgrade my fireware to fix this problem.
Message Edited by justin2006 on 09-26-200612:24 PM

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. What is the best way to do this

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this

@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe

Export Table to flat file and upload to FTP server for external vendor

I have done some extensive searches on the forums and I think I have an idea but really need some help. Basically have a table that needs to be exported to a flat file and uploaded to a FTP server so that our vendor can get the data Monday-Saturday and automated by sysdate. This data is used to produce daily letters that go out to customers.
After doing some searching I came across the UTL_FILE package and reading more into this right now but I am not sure if it is what I should be using to create the file.
I am using TOAD right now and can see how to do it manually however really need the file to create itself and send automatically at 6 am Monday - Saturday with the date at the end of the file name making it a unique file for each day.
Thanks in advance for all of your help.

As Justin and others have mentioned I wrote [XUTL_FTP|http://www.chrispoole.co.uk/apps/xutlftp.htm] so you wont find it in the Oracle documentation. It's pure PL/SQL and uses UTL_TCP and implements an integrated PL/SQL FTP client / API. One of it's many overloaded procedures FTP's the contents of a refcursor straight to a FTP server of your choice, meaning no intervening file is required. Since it is pure PL/SQL, it is trivial to schedule using DBMS_JOB/DBMS_SCHEDULER.
Any questions just ask.
HTH Chris

Combine functionality Batch Create Multiple files and Set Security

Greetings,
Is there any way to combine the functionality of Acrobat Pro’s “Batch Create Multiple Files” (File (drop down) -> Create PDF -> Batch Create Multiple Files…) and running a batch process (Advanced -> Document Processing -> Batch Processing -> Batch Sequences -> Set Security)?
Ideally I’d like to either:
1) Add the “Set Security” batch process to the “Batch Create Multiple Files … command located under the File (drop down) -> Create PDF
or
2) Be able to create a batch process that first allows me to select the documents (Word, Excel, etc.) I want to convert into PDF files, then converts them, then runs the Set Security batch process.
Right now it isn’t too much trouble to first “Create Multiple Files…” then run the batch process Set Security, but it would be nice to be able to do both with a single command.
Any suggestions?
Thank you,
TPK

I have uploaded the files and shared them. These are the links
Grade 11 Maths Standardisation Project Paper 2 2013.doc
https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
The first file is the problem file. If you create this file separately, Acrobat will convert it perfectly. But "Batch create multiple files" and the graphics are deconstructed on page 8

How to create a file and store its contents into another file?

Hi,
I'm having some trouble trying to create a code where I have to to create a file and store its contents into another file?
I read the API, but I'm not certain how this file thing works.
Here's my code so far:
public static void main(String[] args) throws Exception
          File file = new File("tasks.txt");
          if (file.exists())
               System.out.println("File already exists");
               System.exit(0);
          Scanner scan = new Scanner(System.in);
          Scanner scan2 = new Scanner(System.in);
          //Scans the input line by line
          scan.useDelimiter("\\n");
          //Scans the input by tabs
          scan2.useDelimiter("\\t");
          PrintWriter outputs = new PrintWriter("newtasks.txt");
          outputs.print("ok");
          outputs.println(3);
          outputs.close();
     }

I managed to change my text into uppercase, but how do I store the uppercase content into another file.
-So this is what I did so far, I took a text file and modified its strings to uppercase.
-Now I need to put those modified strings into another text file, is there a way where I can do that with my current code?
-I already tried printwriter, but it doesn't seem to work
public static void main(String[] args)throws IOException
          //Task[] oneHundredTasks = new Task[100];
          String uppercase;
          String combine;
          Scanner scan = null;
          FileInputStream in = null;
        FileOutputStream out = null;
        PrintWriter output = null;
        try
             scan = new Scanner(new BufferedReader(new FileReader("tasks.txt")));
             scan.useDelimiter("\\n");
             scan.useDelimiter("\\t");
            while (scan.hasNext())
                 if(!scan.hasNext())
                      scan.next();
                 combine = scan.next();
                 uppercase = combine.toUpperCase();
                 System.out.println(uppercase);
        finally
            if (scan != null)
                scan.close();
        //The program will try the input and output files
        try
             in = new FileInputStream("tasks.txt");
            out = new FileOutputStream("newtasks.txt");
            int c;
            //The number "-1" is used to indicate that it has reached the end of the stream.
            while ((c = in.read()) != -1)
                out.write(c);
        finally
            if (in != null)
                in.close();
            if (out != null)
                out.close();
     }

Lenovo Thinkvantage Access Connections prevents Microsoft File and Printer Sharing

We have several Think pad laptops deployed in our company, including G41, T61, and T500 models. We are using Numara's Track It software to inventory our workstations and laptops. The auditing process needs to have Microsoft File and Printer Sharing turned on in order to work. We have enabled a group policy to set this to on by default. However, the Thinkavntage Access connections manager for the LAN connection overrides the GP and turns off the File and Printer Sharing by default. What's worse, with it off, we can't remotely manage the machine's services or even access the registry. We know that his is the issue, because reconfiguring the access connections manager to allow the file and printer sharing will allow all of our remote administration tools to work, insluding the inventory audit.
Does anyone know how to disable the access connection manager from running remotely? or does anyone know how to change the settings remotely to all for the microsoft file and printer sharing to be enabled by default. I would hate to have to visit each user individually just to turn off a setting.
anyone else run into headaches because of this "security feature"?
Jason

1.Find snetcfg.exe on internet
2.Create batch who runs snetcfg with this commnads from network locations
(this setting enable File and Printer Sharing)
snetcfg -u MS_Server
snetcfg -c s -i MS_Server
3. Deploy and run batch on laptops (GPO)
4. Deploy new AC profiles settings (.loa)
done
sorry for my english

File and printer sharing using Airport Express, usb HP Deskjet 3620 printer

I have a general question, and other forum users might have a good resolution for it - but if not, here's what i'm dealing with..
I have an Airport Express that I bought a couple of years back, it has all the necessary firmware upgrades, i'm running 2 Windows XP boxes going through a combination of Ethernet on 1 directly to the 2 Wire Home Portal 2701HG-B, and I also have an additional Netgear WGR614 v7. All firmware upgrades on all devices is installed and functioning after reset.. I've tried using a combination of the Windows XP built-in networking software, Apple Airport Utility, as well as Bonjour to get things configured and working right over the network. I've also installed the AT&T software, one is running the Mcafee security suite, and mine (the Etnernet box) is running the diagnostic utility.
I've tried defaulting all the firewall settings in either/or/all routers i've tried setting the Airport up with, and there still seems to be problems getting file and printer sharing to work right on all computers, and still remain safe behind the firewall. All the network hardware is set up with wpa2/psk authentication, and appears to be configured correctly.
The only version of the Apple Airport Utility that will run successfully on the systems, is the original version that came on the CD with the Airport. Both systems are completely up-to-date from Windows update, and are both running XP service pack 3.
I know for a fact, that the Airport is working just fine, as I've troubleshot all possible known hardware issues with it individually, hooked up to 1 pc (with current updates installed and running). Wireless works fine, i'm actually running the Airport utility on my main system in the living room, that's hooked up hardwired to the router. Both systems get online and surf without a problem going through either/or router as well. I've also tried dissabling the Windows firewall on both systems, and trying to set up file and printer sharing manually using the wizard, and that don't seem to resolve the issues either. However, both systems (wheather hooked up networked, OR individually), have both been experiencing some odd "quirks". The Ethernet box i'm on, has overwritten my primary HD, as "Athena" and made it unusable. The wireless box, has been giving simular "boot-up" related errors as well. I've checked the Cmos/DOS settings on both, and performed the suggested "boot-up" priority related tasks, and both systems are still experiencing problems. The Mcafee suite is up-to-date, and has caught several potentially dangrous programs running on the wireless box, hooked up to the Airport Express, INCLUDING the bundled HP diagnostic software.. However file and printer sharing still remains elusive...
Are there any suggestions about settings to check on the devices, or in the computers, to make sure it's all configured correctly?

...Also file/printer sharing just flat out over the network is NOT a problem, as it's been configured before over ethernet through my Netgear router and file/printer sharing worked just fine.
The main problem seems to be in the Airport Express' settings, it will "get configured" and then lock me out of the utility to where I can't get back in..
The main Airport password has not been changed, and the wireless network encryption is the same for all wireless devices running on the network.
The main problem, just seems to be with the Airport.
Even the Home Portal has detected the Netgear router (unless it having my Netgear router saved in it's settings might be causing a conflict)... Suggestions?
I've contacted AT&T Home Networking for help already about the Home Portal, unfortunately they can not help me with other network related issues, since i'm not using the 2 wire wireless adapters offered by AT&T...
Message was edited by: okwolffcub

File and Printer Sharing for Microsoft Networks is missing

I have a Server 2012 Hyper-V VM that is missing the File and Printer Sharing for Microsoft Networks. When I try to Install the service it is not listed. The only service listed is Windows Network Virtualization Filter driver. I have the install media but
I don't know where the driver would be located. I'm hoping someone can tell me where it is located.
Update:
I am trying to run Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server but it's not working and it's giving me this error.
Enable-NetAdapterBinding : No matching MSFT_NetAdapterBindingSettingData objects found by CIM query for instances of
the ROOT/StandardCimv2/MSFT_NetAdapterBindingSettingData class on the CIM server: SELECT * FROM
MSFT_NetAdapterBindingSettingData WHERE ((Name LIKE 'Ethernet')) AND ((ComponentID LIKE 'ms[_]server')). Verify query
parameters and retry.
At line:1 char:1
+ Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (MSFT_NetAdapterBindingSettingData:String) [Enable-NetAdapterBinding], C
   imJobException
    + FullyQualifiedErrorId : CmdletizationQuery_NotFound,Enable-NetAdapterBinding
Vincent Sprague

Ok, fixed it, I found the netserv.inf file in c:\windows\inf and tried to use it to reinstall File and Printer Sharing. However File and Printer Sharing was not listed. I copied the netserv.inf file from another Server 2012 VM and was able to install File
and Printer Sharing using the copied NetServ.inf. After rebooting the server I was able to access network shares on the server.
Vincent Sprague

Export PDF creates 0kb file and Print Error.

Similar Messages

Maybe you are looking for