Export performance are very low in "TOAD"?

Dear all,
I have very wired problem that is I run the sql and the result set should be more than 50,000 records. I use the standard function to export into excel file which provides by TOAD. However I don't know why the export are very slow 6 seconds for 100 rows.
Please advice,
Amy

This looks like a Toad problem. And this is not the place for that.
Cheers
sarma.

Similar Messages

My loudspeaker are very low (switched to max) any way to increase the volume. (IPad 1)?

are very low (switched to max) any way to increase the volume. (IPad 1)? [email protected]

Never mind. I see. Siri simply has it's own volume and you can adjust it while in Siri itself. It was set low by default.
doug

Transcode not needed, but the exported files are very large

Hi. I imported a video file (*.m2v) and its associated audio file (*.wav) to Encore. These two files were transcoded and exported by Premiere Pro (setting of the Encoder was MPREG-2 DVD). Now, in Encore, I chose NOT to transcode, because the files are DVD compliant already, and second their total size was less than a DVD's capacity (video file 3.3GB, 6Mbps;;;; Audio file 850MB, 1.5Mbps). My question:why did the Exported Dvd have 7.5GB in size?? Though the total size of video and audio is (3.3+0.8=4.1GB). I have a main menue only that has no fancy stuff nor motion.

Thanks Ruud Blauw. You were right. I used the same assets in two time lines, which resulted in exporting the movie in two twin copies, each was put as a single title in the DVD. What bothers me is that I had no way of seeing this on the [Timeline Viewer]; in other words, I couldnt see two time lines before I export the movie.
After experimenting, I realized that the first"wrong" situation differed from the new"correct" situatioin in only the [Project Tab]: the 'wrong' situation had 4 items in the [Project Tab]: Video file, Video Timeline, Audio File, Audio Timeline. On the other hand, the 'correct' situation had a [Project Panel] which had only 3items: Video File, Video Timeline, Audio File. This means that the difference was only the existence of an Audio Timeline.
Although I am new to Encore, this makes no sense to me. But fortunately it got resolved.

ADAT into Logic Express, VERY low signals recorded

I tried Garageband, same problem, so now I am trying Logic Express.
When transferring tracks from an ADAT, through Alesis io/14, into Logic, the resulting sound files captured are VERY low signal. This should be a digitally ACCURATE TRANSFER. The Alesis montoring software on the mac senses the correct signal, the signal meters show correct levels (and sounds great), but Logic hears and records very low signals.
I note the Sound midi pref window only shows 6 channel 32 bit. It won't allow me to change to 8 channel 16 bit. Possible problem or am I chasing ghosts? I exhausted all my ideas.
Any thoughts?
T

Ropher wrote:
Discovering I was unable to import a ".au" file into Logic Express (or Garage Band) I read it into Sound Studio and exported it in a variety of formats. I can now successfully drag to Garage Band files in formats .aif .aifc .sd2 and .wav and get the expected result.
Unfortunately however, I only get the expected result importing these into Logic Express for the .aifc format which plays back at the expected speed with a low-pitched sound (but which doesn't display an uncompressed waveform). Importing the .aif .sd2 or .wav format files however results in the imported file being squeezed into a very short duration with a correspondingly undesirable very high pitch.
Is there some setting or magic incantation I need for reading in audio files to Logic Express without it getting squeezed?
Thanks!
--Roph
Yes. you need to ascend to level 5 before we give that secret incantation.
Really, you need to use a third party converter software, if you are going to use .au files.
Logic is happiest with .aiff, .wav files, but not much else.
Cheers

HT4623 My ringer and music volume is very low!! The problem just started today can someone help?

Can someone one help me, I just started having problems with my volume. My music and my ringtone are very low!

As a first step, do a hard reset by holding down Sleep/Wake and Home buttons until you see the Apple logo on the screen. If a red power slider appears on the screen, just ignore it and keep holding the buttons down until you see the Apple logo.

Profire 2626 rear inputs VERY low levels

Several months ago purchased a MACBook Pro + Profire 2626 Audio interface to complete my digital home recording project. Initially spent my spare time getting familiar with the setup & made some attempts to record a basic track, with NO success.
Now I've got a bit more time & started to really focus on recording my first project, ALL attempts to far...No success.
The primary root of my problem is the rear Audio recording levels...are very LOW, on a scale of 10, levels = .5, I've turned up all levels on the audio interface + mixer dials. Routing Analog 1/2 = 7/8. 2 x Front input levels seems fine.
I'm a musisician + fairly computer savvy, recording is new to me. however, this has totally mistified me. Reviewed several forum posting but did not see any obvious solution.
Several forum posting's point to the Profire 2626 Audio interface. I'm confident a savvy & experineced recording artist has a solution. Any assistance would be gretaly appreciated..
Components spec's:
MACBook Pro
- 2.66ghz
- 4GB RAm
- OS= 10.6.8
Logic Express 9
-9.1.5 (1700.9) 32bit
M-Audio Profire 2626
-Firmware: 1.0.10
-Software: 2.3.1.

Hi.
I have had input level problems ever since I bought my iO 26 interface too with Logic Express 9. Here are 2 things I do which might help you. In Inserts go to EQ, Channel-EQ has a Master Gain on the left. I raise it to what I need. Another way I do it is to pull up Gain in Utility and raise the volume there. There might be a better way to do it but I have not found it. I hope this helps.
W.W.

Dirty mid-range frequency and very low vocal

I noticed this problem after I installed and began using Bose USB speakers on my Windows XP. In my iTunes, many of the songs have staticy mid-range frequency sound and vocals are very low and difficult to hear. These songs include songs that were ripped directly from marketed CDs or downloaded from iTunes Store. My equalizer is set to Flat and messing with the equalizer didn’t help as it made the songs even more staticy. I don’t have this problem on QuickTime, Windows Media Player, Realtime, nor on iPod. Only on iTunes. I want to use iTunes since I find it more convenient and easier to use than any other players that I know.
Can this be fixed? Please help.
iTunes 7.1.1.5 Windows XP

btw, I'm using my built-in laptop speakers (Altec Lansing); so it's not a Bose thing.

Very low microphone levels with soundblaster live

Im trying to do some digital recording and my microphone levels are very low even when I have the microphone levels at maximum. Ive done all the windows xp trouble shooting but to no avail. I have tried two different microphones, both work well through amplifiers. Any suggestions?

mattp65 wrote:
Well, Im not sure. I open up the windows playback controls and then go to record control and I have the microphone bar at maximum. But by asking if it I have it up to 20 db I wonder if Im in the right control area because there are no units on this control bar. Am I in the right control panel?
On Windows Play/Recording Controls the Mic +20dB boost option can be found behind the "Advanced" -button (below Mic level slider). On CT Surround Mixer it's behind the 'tiny red + sign', above the Microphone slider.
jutapa

Sounds are verry low

hi i am using a nokia e66 and its sounts are very low even ringtons help me to get maxximize sounds

I also have experienced lower volume in the headset speaker after Lolipop upgrade. Speaker volume seems lower as well as alarms are not as loud as I remember. Looking at settings and app configuration I didn't find anything to restore the sound to volumes I remember it being before. Sound via ear buds and headphones is fine, volume goes pretty high and sounds good but the phone on its own seems the volume is weaker now.

Select single to RSEG with very low performance

Hello experts,
We have recently upgraded our sap basis from 701 to 740 and we are experiencing a very low performance with the following abap instruction:
select single * from rseg into lw_rseg where ebeln = lw_output-pedido and
ebelp = lw_output-item and
kschl = lw_output-kschl.
Could it be anything from the upgrade?
Any suggestions?
If we change the "*" for only one field of the RSEG table, would the improvement in te performance be significant?
Thank you.
Best regards,
Raquel Oliveira

Hi, Raquel!
In SELECT statement you are not using the key fields for RSEG table.
Replacing "*" by a single field won't do the trick.
In our system we've got a table index on EBELN and EBELP fields in RSEG and it helps a lot.
In case you don't want to set additional indexes you can find all incoming invoices for the purchasing document items in EKBE table and then go to RSEG having BELNR, GJAHR and BUZEI fields.
If you already have table index on RSEG with EBELN & EBELP fields - you can trace SQL statement in ST05 and check whether it uses the index.
And apart from that - anything can be from upgrade

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

After import from Iphoto some pictures are of very low quality. The original file in Iphoto is very good.

Final cut Express
I imported several pictures by using Iphoto. Some of them, not all, are of very low quality even if the original file is of a very good quality.

It sounds as though you may have imported the thumbnails but I can't imagine how.
It all depends on what you mean by very low quality.
Your iPhoto pictures will be around 4,000x3,000 pixels but when they are imported into a standard def timeline they will be around 720x540 which is a tremendous reduction.
They should still look OK but not as good as the brilliant hi-res originals.
Message was edited by: Ian R. Brown

HT4489 I am trying to import vcards, they are very simple - a name and contact phone number. No pic, no ancillary information, but I get an error then directed to this completely unhelpful page. The vcards are standard exports from another phone.

I am trying to import vcards, they are very simple - a name and contact phone number. No pic, no ancillary information, but I get an error then directed to this completely unhelpful page. The vcards are standard exports from another phone.

Try creating the vCard with the app My Contacts Backup, email it to yourself, then open it on your phone and tap the attachment to import the contacts.

When instant streaming Netflix on my Macbook Pro, the sound is very very low even when sound controls are set at highest level.

When instant streaming Netflix on my Macbook Pro, the sound is very very low even when sound controls are set at highest level. I do not have this problem when listening to TV or watching movies streamed from DishNetwork. I contacted Netflix and they had me install a newer version of their software Silverlight... this did nothing to resolve the issue. They were not familiar with the issue.

Well if your on 10.6.2, you need to software update to 10.6.8
Perhaps you need to adjust the Silverlight (Microsoft DRM video plug-in) sound level itself too
Run a check here to see if your current on your Silverlight (works for all browsers)
https://www.mozilla.org/en-US/plugincheck/
Use another browser like Firefox and see if it continues.
Try another video file. They all have their own sound levels too.

Very Low performance Firewire

Hi
First.. sorry for Bad translating.
i notes very low performance of my FW800/400 (i think after EFI/SMC Firmware Update)
FW800/400 More slowly the USB2 and FW800 cannot see External Devices that working fine with my macbook pro.

Hey Noorldin,
I think I have a similar problem. I have always had some issues with the ports (owned the MacPro since the first month it came out) but several months ago things took a turn for the worse. External harddrives no longer work properly. USB drives won't mount, firewire drives will mount but the transfer rate is roughly 1MB a sec and after ~10 MB I get an error and the transfer stops. Other peripherals work for the most part but not well. My external usb microphone will not stop receiving audio signals when turned off and my canon HV20 drops frames during transfers. My awesome fujitsu scansnap scanner, printer, and usb mouse transmitter all work fine though. I used to be able to play many 1080p videos at the same time, now I can not play one without frames dropping even when booted into a new clean internal HDD. The MacPro will only sleep if I manually set it to sleep. The autosleep feature will have the internal hdds spinning up and down all night.
I spent 20 min on hold to get an Apple rep and then 47 min on hold to get an Apple Specialist. The specialist was very kind and tried many things with me. In the end, the specialist concluded that my Logic board or CPUs were most likely bad and that I should get them tested and possibly replaced. You may need the same.
One weird thing I tried just the other night was to unplug all USB and Firewire devices, including my 30 in display and wireless mouse hub, and then I plugged in just one firewire hdd. It worked fine!? So, I will continue testing on my own for a while and let you know what I find out from my tests or from the Apple repairs, as I have only seen one other person with an issue like mine and what I believe might be yours too. I have seen many issues with the front ports not working right though.

Export performance are very low in "TOAD"?

Similar Messages

Maybe you are looking for