Export photo but size is too big and magnified for uploading to web

Hi
I have tried to export a photo from IPhoto using Export function, selecting small then exporting to Desktop.  When I tried to upload to the web, the picture is very large and takes up the whole screen.  Even if i demagnify the picture before saving it, it is still very big.  I have tried to crop but this does not help.
Please can you advise a quick and simple way to make pictures smaller visually.  (When I used Window, I used Paint which did the job).
Thank you

Thanks for the link.
I'm not clear as far as size of file goes, and also to preview how it looks before exporting it.  I went to the File Export tab and should I wish to select "Size" then "Small", what size will that be on the screen? Or should I goto "Web Page", then if I goto "Image", I am sure what to reduce the 640 down to, but say if I half it, would that be a reasonable size on the screen/web page?
I'm just trying to find a quick way to resize pictures for uploading to the web... but it's still a big vague to me.

Similar Messages

  • When using Facebook thr Firefox the screen size is too big and cannot find way of reducing it to fit for seeing and reading?

    When I open Facebook the print is very large and the page does not fit the screen so need to keep moving back and forth across to be able to read it. It was not like this before.
    Please can you find a solution for me
    Thank you

    See this: <br />
    https://support.mozilla.com/en-US/kb/Page+Zoom

  • I am using my first apple product, mac book pro.  somehow i FIGURED OUT HOW TO INCREASE THE FONT FOR SEARCHES AND WEB PAGES, BUT THE FONT IS TOO BIG AND FOR THE LIFE OF ME I CAN NOT FIND WHERE TO GET THE SCREEN BACK TO NORMAL, HELP ANYONE?

    I am new to Apple, somehow I figured out how to make font of Web pages bigger, but it is too big and I can't use sites properly.  for the life of me I can not how to get my font size reduced.  Help anyone? thank you, sbb

    Probably command-minus will do the trick.

  • Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

    Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

    I assume you have Photostream on, correct?
    In order for the photos to be moved into Photostream, you must exit the camera app, and be on a wifi connection.  Both of these criteria must be met before the sync occurs.

  • Making a interactive PDF from indesign, but it's too big. Tried to reduce file size in Acrobat, but

    Making a interactive PDF from indesign, but it's too big. Tried to reduce file size in Acrobat, but it does not reduce file size.

    Use the Optimize PDF command in Acrobat, it gives you more control. I think it's under the Advanced menu in Acrobat 9 Pro and File > Save As > Optimized PDF in Acrobat X Pro.
    You might try playing around with different settings. You can also click the Audit Space button at the upper right to see if its from images or other things causing the file size problem.
    Unfortunately, InDesign doesn't write interactivity in a very optimized way. You get better results with buttons, for example, creating them in Acrobat Pro and using the Duplicate command to duplicate them across multiple pages.

  • MacBook Pro Retina - Images in PS look great, but when uploaded to web too big and distorted

    Part of the reason I hated using my Mac for graphic and web design is that when I create images in adobe photoshop everything looks amazing. However, when I upload them to the web, they are way too big and look distorted, this includes text.
    I'm trying to make a text logo with a transparent background. When I create it in photoshop the size I want it looks fine and clear, but once it's uploaded to the web it looks way too big and the font is blurred. How can I fix this? I use the Adobe Cloud, so I have the latest version.

    No sir, I'm still trying to figure out how to fix it
    Here is what it looks like in photoshop :
    then to see what it looks like in the browser, go to http://enigmadesigns.boards.net
    This preview in the thread was taken with my cell phone as I don't know how to screenshot on  a Mac yet LOL

  • How do you minimize the export setting screen becuase mine is too big and I cant go on the export option

    how do you minimize the export setting screen becuase mine is too big and I cant go on the export option

    The export dialog is manipulated in the same way as any window.  If you don't have enough screen real estate to grab the edges of the dialog and change it's size, then you may need to work on a larger screen, or at least increase the display resolution of the screen you're on.

  • Finished my composition but it's too big, I need to scale to a fixed height and width - help?

    Hi everyone,
    This is quite urgent - I've finished my project in Edge Animate, but it is too large and needs to be scaled down. I tried to place it in a separate DIV element in the HTML and scale it down with the CSS but this doesn't work.
    I want to scale it from the 1024px wide it currently is down to a fixed width of 800px. Can anyone help me do this? All of the tutorials I have found are to do with making the composition responsive to the user resizing the browser, and this isn't what I need at the moment.
    Any help would be greatly appreciated! Thanks!

    Can you explain a bit further what you need this for? Are you just trying to center the Stage on your page?
    Asking because when writing out this script I ran into some weird browser issues setting the transform origin to the center (IE and FF IIRC). You can give it a shot though by changing the transform origin in the code to:
    “transform-origin”:”50% 0″, (for all prefixed instances)
    Not guaranteeing results, but you can try
    Sarah

  • Can someone help! PDF export failed claims "pages are too big" they are 8x10??

    Can someone help! PDF export failed claims "pages are too big" they are 8x10??
    I'm trying to export an 100 page magazine, just a small proof right now and I've done this a million times. There are no errors, all my links are good but still it will not save.
    Can anyone help!

    Hi marthah,
    I'd love to help, but need a little more information to go on. Are you converting from or to PDF, and where is this error occurring (in Acrobat, InDesign, or somewhere else)? What operating system/browser are you using?
    Thanks,
    Sara

  • The font for my yahoo log in is very very small anbd my email fonts are far too big and the words overlap, please help to correct this problem

    The font for sign into my yahoo mail is so small that I am unable to make out my ID and password and when I do get into my mailbox, the fonts are far too big and the words overlap. Tried going into tools /options to make changes but not successful, please help.thanks

    Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • Scanning: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.

    Good Day.
    I have recently discovered an issue with scanning.  I have tried scanning straight from the printer, through image capture, and through preview.  All yeilding the same results since they are essentailly kicking off the same scanning applet.  I can scan a jpeg formatted file as long as I applet is in the "Hide Details" mode.  If I click on the "Show Details" button, which I need to do to scan to PDF, I immediately receive an error stating: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.
    I'm currently using an HP C5180 printer.   The most recently installed software was Adobe Digital Editions (I installed this to read an on-line e-book).  Not sure if there is any correlation.    Thanks for any help.
    Mac details are:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,1
      Processor Name:          Intel Core i5
      Processor Speed:          2.3 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B27
    Printer access log:
      Source:          /var/log/cups/access_log
      Size:          174 bytes
      Last Modified:          11/21/12 10:09 PM
      Recent Contents:          localhost - - [21/Nov/2012:22:09:16 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
    localhost - - [21/Nov/2012:22:09:20 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
    Image Capture Support:
      Image Capture Support:
      Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Info.plist
      Version:          2.3.0
      Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Resources/Dev iceInfo.plist
      Version:          2.3.0
    Photosmart C5100 series:
      Status:          Idle
      Print Server:          Local
      Driver Version:          4.0.0
      Default:          Yes
      Shared:          No
      URI:          dnssd://Photosmart%20C5100%20series%20%5B960B9E%5D._pdl-datastream._tcp.lo cal./?bidi
      PPD:          HP Photosmart C5100 series
      PPD File Version:          4.0.0
      PostScript Version:          (3011.104) 0
      CUPS Version:          1.6svn (cups-327)
      Scanning support:          Yes
      Scanning app (bundleID path):          -
      Scanning app version:          -
      Scanner UUID:          CC8DD435-CC8D-D435-CC8D-D435CC8DD435
      Printer Commands:          ReportLevels
      CUPS filters:
    Inkjet:
      Path:          /Library/Printers/hp/cups/Inkjet.driver/Contents/MacOS/Inkjet
      Permissions:          rwxr-xr-x
      Version:          4.0.0
    commandtohp:
      Path:          /Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/comman dtohp
      Permissions:          rwxr-xr-x
      Version:          2.1.1
      Fax support:          No
      Printer utility:          /Library/Printers/hp/Utilities/HP Utility.app
      Printer utility version:          5.9.1
      PDEs:
    PDE.plugin:
      Sandbox compliant:          Yes

    Hello Sig
    The scanner works with a Windows computer, which proves the device is functional at a cursory level. The drivers are now distributed by Apple and this is an Apple computer. There is no scanning software provided by HP. HP's answer is that Mountain Lion takes care of all of this.  I anticipate that some setting or driver was somehow tweaked since the scanner had been working with Mountain Lion until a few days ago.  The device in question is an Apple product. So, I'm pretty confident that I'm in the right place.
    Regards

  • Web link is too big and doesn't work

    Hello,
    I have a program where i send an email and in the email body i have a web link. This web link is too big and it's broken in two lines when email is open in email box.
    When i clik in the link, only the first line have the aspect of a link, the line is blue and underline. In this way, the link doesn't work properly because another half is missing.
    This happen in outlook but when i sen the email for gmail account, the link is show correctly and it works.
    Does anybody know how to help me?
    Thanks and best regards,
    Maria

    Dear Rave,
    Thank you for your reply.
    Yes, I tried several times and got the same results.
    Does it have anything to do with the Options/Applications used in Firefox?
    Dr. T

  • HT204266 How to update the app through iTune if its size is too big?

    How to update the app through iTune if its size is too big?

    If your actually wanting to update your iPhone to IOS  6 and you don't have enough memory available, you still need to the action Chrisfromgastonia recommended.  You will find that Movies and TV Shows being moved to your itunes will free up the largest amount of space.  If IOS 6 is your objective, you may be able to re-download the Movies / Videos after the update.

  • I just bought my export pdf but if I sing in and enter in my plan I don't see it, why? when can I start using it?

    I just  bought my export pdf how can i start using it? if i sign in & look for my export pdf I am sent to the page to pay it again??? Could you help me please?

    Hi florence,
    Thanks but it did not work.
    I bougth the Export PDF for power point but I do not see it in my account
    and if I clicked in my orders buttons, nothing appears, it seems my
    purchase is lost. Could you help me to verify it, I did it yesterdar
    September 22, 2014 around 10:30 in the morning Mexico time. Or how do I get
    my funds back?
    Regards
    Fabiola
    2014-09-23 5:50 GMT-05:00 florencejohn <[email protected]>:
        I just bought my export pdf but if I sing in and enter in my plan I
    don't see it, why? when can I start using it?  created by florencejohn
    <https://forums.adobe.com/people/florencejohn> in Adobe ExportPDF - View
    the full discussion <https://forums.adobe.com/message/6755125#6755125>

  • New iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server

    new iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server. by the way i try to dowload from turkey.

    anyone help me there? )=

Maybe you are looking for