Export playlists from my iMac and import them to my MacBook Pro

Both computers have the same library, however I can not export my playlists from my iMac to my MacBook Pro. The name of the playlist imports into my library but the music doesn't. Any suggestions..

Export the playlist as an .xml file not .txt and it should work.
Cheers-

Similar Messages

  • Hello i need a help about script to export translatable text strings from ai files and import them back

    Hello i need a help about script to export translatable text strings from ai files and import them back after editing, thanks in advance

    Lanny -
    Thank you for taking the time to help with this problem. Can I just say however that as someone who has posted a first comment here and quite clearly never used a forum like this before, your comment unfortunately comes across as very excluding. It makes me feel there are a set of unwritten rules that I should know, and that I don't know them shows that the forum is not for me. In short, it's exactly the kind of response that stops people like me using forums like this.
    I'm sure it's not intended to be received like this and I am sure that the way you have responded is quite normal in the rules of a forum like this. However, it is not normal for those of us who aren't familiar with forums and who only encounter them when they have a genuine problem. This is why I hope it is helpful to respond in full.
    The reason I posted here is as follows. I was directed here by the apple support website. The original comment seemed to be the only one I could find which referred to my issue. As there is no obvious guidance on how to post on a forum like this it seemed perfectly reasonable to try and join in a conversation which might solve more than one problem at once.
    Bee's reply however is both helpful and warm. This could in fact be a template for how new members should be welcomed and inducted into the rules of the forum in a friendly and inclusive way. Thank you very much indeed Bee!

  • Why does iPhoto not recognize the .jpg pics from a Kodak C875 now? I can stick my memory card in the iMac and import them that way, but iPhoto will not import the pics from the camera.

    Why does iPhoto not recognize the .jpg pics from a Kodak C875 now? I can stick my memory card in the iMac and import them that way, but iPhoto will not import the pics from the camera.

    There have been many issues reported with Kodak cameras - serach the forums for them
    Actually the best practise is to use a card reader to import your photos, verify that they are imported ocrrectly and wait at least one backup cycle and then use the camera's format command to reformat the card and erase it - this assures no lost photos and always having the card properly formatted
    LN

  • When I had a PC I simply took the wire going to my monitor and connected to my big screen TV to watch Netflix movies...How do I take them from my IMAC and connect them to my TV now?

    When I had a PC I simply took the wire going to my monitor and connected to my big screen TV to watch Netflix movies...How do I take them from my IMAC and connect them to my TV now?

    This could be problematic.
    It will depend on what model of iMac you have.
    You may want to post machine info.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    Leave out the serial number.
    Example:
    Machine Name: iMac
    Machine Model: PowerMac4,1
    CPU Type: PowerPC 750 (33.11)
    Number Of CPUs: 1
    CPU Speed: 600 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 768 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.1.9f1
    Most of the iMac's have sometype of video output port on the back.  You will problably need a converter.
    The 'hollywood' industry has been making it more difficult to get video out over time to prevent copying.
    Robert

  • How do you separate corrupt files from good files on a external hard drive importing them to my macbook pro

    how do you separate corrupt files from good files on a external hard drive importing them to your macbook pro

    You open them one at a time into thier respective programs and see if they are good or not and then send the bad ones to the Trash and the good ones to the appropriate folder.

  • Export Mailbox from Exchange 2010 and Import to Exchange 2007

    Hello,
    I exported mailbox (1GB in size) from Exchange 2010 to *.pst file; I need to import it into
    Exchange 2007 mailbox. Is it supported ?
    The operation completed successfully (no errors) but no items were imported; is it due to unsupported backward compatibility or some other issue ?
    Thank you,
    Luca
    Disclaimer: This posting is provided AS IS with no warranties or guarantees, and confers no rights. Whenever you see a helpful reply, click on [Vote As Help] and click on [Mark As Answer] if a post answers your question.

    I also have the same issue. Exported mailboxes on Exchange 2010 SP3 latest updates using
    New-MailboxExportRequest and then tried to import into mailbox on Exchange 2007 SP3 with latest updates. The 32-bit client machine used for the import has Outlook 2010 SP1 (SP2 and later updates causes a different error). I used Outlook 2010 because the E2K10
    New-MailboxExportRequest documentation states that you have to use Outlook 2010 or later. The PST files created can be opened and imported via Outlook but not with the
    Import-Mailbox cmdlet (with no error as stated in this thread). Other PSTs, not created from E2K10 export do import just fine. I also ran ScanPST.exe against the exported PST and then ran the import again and it worked, everything got imported. Interestingly
    the test mailbox PST file I was using was 761 KB but after the ScanPST it was 1,257 KB - must be some difference in the PST format that the Import-Mailbox cmdlet can't deal with.
    Does anyone have any other solutions or
    workarounds to this. I've got over 900 mailboxes I need this for due to an
    acquisition? Has anyone tried using Outlook 2013 on the machine used for doing
    the Exchange 2007 imports or does Outlook 2013 also have the same issue as later versions of Outlook 2010 (Exchange Mailbox import failed with error code 2147221233)?

  • Can i plug an usb drive into a iMac and access it with a Macbook pro?

    I have an iMac that is less than 3 months old and my wife now has a two week old Macbook Pro.
    IMac:
    21.5" screen
    3.1 quad core i7
    16 GB Ram
    1 TB Fusion drive
    Macbook Pro:
    13" screen
    3.0 dual core i7
    8 GB ram
    512 GB Flash storage
    Both have Mountain Lion.
    Both are running iOS 6.1.2
    I would like to attach an external USB hard drive to the iMac and allow the Macbook Pro to be able to have full access to just the external USB hard drive.  Either it can't be done or I am just not getting the Sharing settings set correctly.  I played around with sharing last night on both machines.  When I would plug in a FAT 32 thumb drive into either machine and find it, I would add it to he shared folder but it would only allow me and "Everyone" to have access.  I could not change "Everyone" to "No Access" because "Everyone" was greyed out or add my wife.  I can access the Macbook Pro as Mark with the iMac but I can only access the iMac from the Macbook Pro as a "Guest".
    I am using a Netgear WNR3500L router.  I currently have the USB hard drive connected to the router via the Readyshare USB port but it is formatted as NTFS for Windows shared files.  This router does not recognize HFS+ formatted hard drives in the USB port.   When I move it to the iMac, I will back it up and then reformat it as HFS+.  Since the router is about a year old and working fine, I would buy an Airport Extreme or Time Capsule if that is my only choice.
    I don't normally turn off the iMac.
    I would not want to allow access to any other device.
    Since I am very new at Mac's, I would appreciate any help that any of you can offer me.

    Topher Kessler,
    Thanks for commenting to me.
    My thumb drive is formatted as Fat 32 so your first paragraph explains what I am seeing.
    You are correct that my existing router does not support HFS+.  It is visible from my MAC and some file are read only.
    The drive that I will be wanting to attach to the iMac would be formatted as HFS+ so it would not be accessible from my router.
    So, if I setup sharing (If it is possible) and thern plugged in a USB 3.0 hard drive into my iMac, would it be accessible to my Macbook Pro?  If it would not be, it looks like an Airport Extreme or a Time Capsule are my only options?
    I see that a Netgear 4500 is Time Machine compatible.  Any idea what that means?  When I read pages 80 through 82, it appears to me that you format your drive to HFS+ and then eventually plug it into the router usb.
    http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_08Jul12.pdf
    Thanks for your comments.

  • How do I transfer Notes from my iPhone4s and iPad to my new MacBook Pro?

    How do I transfer Notes from my iPhone4s and iPad to my new 13" MacBook Pro with retina display?

    Finally figured it out...
    1) Open mail/compose notes on your macbook...
    2) copy and paste every note from Outlook to a new note in Mail.
    3) Open iTunes. In Info/Advanced tick Notes. This will replace / copy all Notes from Mail to your iPhone...
    4) Voila! Notes are on iPhone...
    I must say in spite of all the fabulous advantages of a Macbook and an iPhone, syncing really does suck...
    Transferring data from another smartphone to a Mac or an iPhone is tough...
    Features like "one way / two way" sync for Phone / computer or allowing us to select which whose, phone or computer, will be considered more important so that you can choose whose data will overwrite the other, are not there in iTunes... This is something which really needs to be there...
    Anyways... problem solved for now...
    ciao...
    Jesal

  • Transferring playlists from my old hp computer to my new macbook pro

    how do i transfer my playlists from the old pc to the new mac?

    See if this article helps - http://www.myfirstmac.com/index.php/mac/articles/how-do-i-move-my-itunes-library -from-pc-to-mac-and-keep-my-settings-intact
    MJ

  • How do I take all of the music on my iPhone and import it to my Macbook Pro?

    I had an Asus laptop and that's where all my music was, now I'd like to get it all to my Macbook Pro I have everything I need on my iPhone so how can I get all of my iPhone music to my Macbook pro?

    Your best bet is to transfer it directly from the other computer (copy the entire iTunes folder from one to the other, put in same location), otherwise your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software.  See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

  • The icons on the dock (and some other places) sometimes appear in low resolution, I'm running Lion on my iMac and Snow Leopard on my Macbook pro, got the same problem on both, anyone?

    A few days ago I noticed that safari icon was in "low resolution", so then I deleted and put a new one in place, but after tahat I've been notice that otheres are doing the same, on my macbook pro (running snow leopard) the things are worse, sometimes even the shortcuts to applications and downloads show with the same problem. Could this be a virus???

    Likely a corrupted cache file
    Read the
    Deeper cache cleaning/resetting
    https://discussions.apple.com/docs/DOC-3046

  • Export mailbox from 2010 (sp3) and import into 2007 Sp3 rollup 10

    I have no issue exporting the mailbox from 2010.  
    The issue is importing into 2007.  I have a 2003 32 bit server with outlook 2003 sp2 running etc.  Every time I try to import I get the below error.  Is this even supported?
    I've scoured the web, tried fixmapi, added permissions, different switches, etc.  The pst attaches fine to the mailbox without issues.
    [5/15/2014 8:15:51 AM] [0] [2007import2] Opening Exchange mailbox.
    [5/15/2014 8:15:51 AM] [0] [ERROR] Error was found for 2007import2 ([email protected]) because: Error occurred in the step: Approving object. An unknown error has occurred., error code: -2147221219
    [5/15/2014 8:15:51 AM] [0] [2007import2] The operation has finished.
    Any help or sugesstions would be great!

    Steve I see that Belinda suggests that this may be a bug and that you are on SP3, however it may be that you need to update your systems completely to see if the issue is resolved.  To be able to find the actual patch level you are on you would need
    to follow the steps below.  Once you know your actual patch level you can either just update to the latest and greatest and try again OR read through the various fixes for each patch newer then what you have applied
    1.    This is the link for the Exchange Server Build #'s including Service Packs 
    http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollups-builds-numbers.aspx
    a.    Only thing you will not find in this list are the IU (Interim Update #’s) because they are unofficial patches to fix specific issues and then must be uninstalled before moving on to the next RU, CU or SP.
    2.    To find the SP, RU, CU level that your server is on use this Powershell command.  
    GCM exsetup |%{$_.Fileversioninfo}
    EXAMPLE 1:  Below is the result from a server with 2010 SP1 RU6 installed and you will see this referenced in the above link
    Product Version         File Version          File Name
    14.01.0355.002           14.01.0355.002   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
    EXAMPLE 2:  Below is the result from a server with 2010 SP1 RU6 installed WITH an IU from MS and you will not see this version referenced in the above link but it is sequential, i.e. SP1 RU6 is .002 and the IU is 003.  So in short by looking at this
    and the above link you could easily infer that this system has SP1 RU6 with some type of IU installed.
    ProductVersion   FileVersion      FileName
    14.01.0355.003   14.01.0355.003   C:\Program Files\Microsoft\Exchange
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • Export database from Oracle 8i and import to Oracle 10 g EX

    Hi
    I'm beginner Oracle user .Sorry for my english
    I have server oracle 8i on Novell system. Now I installed Oracle 10 g Expres on Windows XP. How move data from Oracle 8i to Oracle 10 g EX.
    Thanks for Your help

    Pl see the documentation - http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/impexp.htm#CFHJAHAA
    You will need to export from the 8i database, copy the file (in binary format) to the Windows server, then import into the 10g database
    HTH
    Srini

  • Export AD users to csv and import them to Exchange using shell

    I'm implementing Exchange 2013 on a Windows server 2012R@ network.
    Now i want to import the users from the AD on the server into the Exchange server.
    I've created a csv from the AD users, but there begins the problem.
    I can't seem to get past some isseus..... The following script is where i'm at at the moment.
    C:\Windows\system32> $list=import-csv "C:\users......." |foreach {new-mailbox $_.emailaddresss}
    when i run this script in the shell of exchange i'm missing some parameters.
    I need a password and a userprincipalname.
    Can i include this in my script? And which password do i need?

    Are you implementing Exchange 2013 into an existing AD environment or are you trying to import users that exist in a separate AD forest into your environment?
    If you are implementing Exchange into an existing AD forest where the AD user accounts already exist, do use the Enable-Mailbox cmdlet instead as this adds a mailbox for an existing AD user.  The New-Mailbox cmlet will create a new AD user account,
    which would be a problem if the accounts already exist.
    If you are trying to bulk create mailboxes in a new AD environment where these AD accounts do not already exist, then you will need to create a password to assign to all the new accounts being created.
    This link has information on creating new mailboxes using an input CSV and assigning passwords via the EMS.
    http://exchangepedia.com/2006/11/exchange-server-2007-bulk-creation-of-mailboxes-using-exchange-management-shell.html

  • Export Data from Oracle 10g and import in SQL server

    Hi Guys,
    I have assigned a task in which I am required to transfer data from oracle database to SQL server. I have not done this before. Can anybody help me the easiest way to accomplish this. Thanks

    One way of doing this is setup Heterogeneous Database connections
    http://www.dba-oracle.com/t_heterogeneous_database_connections_sql_server.htm
    I am sure there's other options out there.

Maybe you are looking for