Export Podcast Not Working

I've produced a Podcast in Garageband 3 and have attempted to both send it as a song to iTunes and to export it as a podcast. It goes through the mixdown and encoding, but then it yields absolutely zip - I've done a search on the name that I've saved the podcast under, but it's not showing up on the radar; it's as if the file doesn't exist. Any ideas? I was pretty happy with GB 3 up until this point, now I'm just annoyed.
G4 Mac OS X (10.3.9) 933 mhz single-processor Quicksilver

Check out AppleCare Knowledge Base Document: GarageBand 3: Podcast export fails without warning when
using Mac OS X 10.3.9 . This issue in the article is specific to 10.3.9.
That article is not entirely true, at least in my circumstance. I found that I needed to update to Tiger to export my LARGE podcast (1:38 hours, 50+ images). I used Spoken Word (since it was a lecture, and wanted to keep size under 50MB) as the setting, but I'm assuming I could have gone higher quality.
I have seen a lot of posts regarding this and I don't know why Apple just doesn't say "You need Tiger" to export big podcasts. There have been endless threads about this and I tried Mono to no avail.
I wonder if the amount of Scratch Disk you have available makes a difference as well. GB3 creates a Mixdown, then Converts the .m4a file in the specified Save location and I'm not sure if you only have a few GB of free space if that may be an issue. BTW, I have about 10GB of free space on my disk and I'm saving to an external LaCie d2 drive.
(was surprised when this worked yesterday)
12 1 GHz PowerBook G4 Mac OS X (10.4.5) iPod nano 4GB, LaCie d2 160GB, LaCie Ethernet Disk, iMic, Razr Bluetooth

Similar Messages

Exported HTML not work in my host.

Exported HTML not work in my host.
The program works fine. Looks good in the browser preview and published in businesscatalyst, but when i exporting as html and upload it to my server is bad, all misplaced.

Thanks for the reply.
Everything is apparently copied and permissions are well.
Watch this please.
So it should be seen:
http://koldo01.businesscatalyst.com/
It is seen:
http://www.koldofuentes.com/

Include in Export does not work in APEX 3.1

I have a report with many columns. On screen I only show several columns, but on export to CSV I want to include all columns.
However, when "Show on Report" is set to No, and I want to set "Include in Export" to Yes on the "Print Attributes" tab, it does not get updated.
It only gets updated when the "Show on Report" is set to Yes.
It also seems that the "Include in Export" on the "Report Attributes" tab is not in sync with the "Include in Export" on the "Print Attributes" tab the first time you access the "Print Attributes" tab.
Question: Does "Include in Export" only works for columns which has the "Show on Report" set to Yes? If Yes, how can I achieve the above mentioned?
Guido

Marc,
After some investigations the following can be concluded:
On the Report Attributes tab, pick a column, and set "Show Column" to Yes, "Include in Export" to Yes, and no conditions.
I do not want this column to be printed, so on the Print Attributes tab, set the "Column Width" to 0.
When you run the report, you will notice that the column is not included in the export to CSV and not printed.
Setting the "Column Width" to a value greater than 0, the export to CSV works fine, but the column is also printed.
You can have a look at page 1 at at http://apex.oracle.com/pls/otn/f?p=261 (demo/ankpm)
Thanks Patrick for your solution (:REQUEST LIKE 'FLOW_EXCEL_OUTPUT_%'), it works great. The column is now not show on screen but included in the export to CSV. However, you have to set the column width to a value greater than 0.
An enhancement request for 4.0 could be to also have a property "Include in Print", and that this property and "Include in Export" are not dependent on the "Show Column" value.
Guido

Some Podcasts not working since upgrading to 1.2

Ever since I upgraded my IPOD to version 1.2, I have found that some podcasts which I subscribe to no longer work. It downloads and transfers to my IPOD OK, but when I go to play it my IPOD shuts down then eventually restarts. So far it seems to happen with KCRW's the Treatment, Creative Screenwriting & WFUV podcasts. I know I could probably restore it back to the previous version but I'd rather not as I have already paid for a game which I know only works with the new functionality (plus I like playing it). Anyone else found this?

There's another thread about this somewhere - many people have had this problem. I've had it with the Creative Screenwriting podcasts, which are the only ones to which I subscribe.
The thread proposed a workaround - start the podcast not at the beginning but one second in. You have to select the podcast, then I think do a Get Info or something - there's some way to find Options, then Start Time, then input 1 or 2 seconds in (with the CS Podcasts, this is fine, since Jeff tends to yakk on for at least two minutes before the interviews begin!)
I've not yet tried it, but it seems to have solved problems on the other thread, accepted as a workaround until Apple fixes it.

Aperture export is not working, "Choose" buttons also not reacting

Suddenly I can't export versions, originals, metadata and export as library anymore. Also all "Choose" buttons do not react anymore. For example its not possible to open another Library or choose the external photo editor in Preferences. If I login with my second useraccount Aperture does work just fine.
On Monday I had no problems at all. Sofar I did the following things:
FIRST.
Repair Diskpermissions and Verify disk which was OK.
Moved to desktop following files:
~/Library/Preferences/com.apple.Aperture
~/Library/Caches/com.apple.Apertue
~/Library/Containers/com.apple.Aperture
Emptied the trash and restarted. The problem is not solved.
SECOND.
All the above actions and restart.
Aperture Photolibrary first aid, "Repair Permissins" , "Repair Database" and "Rebuild Database".
The problem is not solved.
THIRD.
Uninstalled Aperture and removed all files containing the frase "Aperture" (as far as these files had any connection with the application).
Repair Diskpermissions and Verify disk which was OK.
Emptied the trash and restarted.
Installed Aperture from DVD and update via Apstore.
Still the same problems so I am asking the form members for help.
Mathieu

Are you having any troubles wiht other applications run from this account?
From what you wrote you seemed to have covered all the bases not sure what else to suggest. What is the system?
Do you have any plugins installed in Aperture ? What about any applications, plugins etc, for this account?
You can try doing a safe boot (hold the shift key down as soon as you hear the start up chime. Hod it until the Apple appears on the screen) Safe boot takes longer to come up, there will be a status bar at the bottom of the screen while it boots. Once it is up you will see Safe Boot in red letters at the top of the screen on the login page. This might not work if you have File Vault turned on.
Once booted in Safe mode log in. Aperture use to not run in Safe mode because the graphics card is restricted but I believe in 3.5. it will run. Note everything will be slow and jerky.
See if that makes a difference. Once done testing boot normally and try it again.

Video podcasts not working

Is anyone having problems with video podcasts? For instance, I have the ABC news video podcast and I can hear it but the video is not working.

That is correct the video podcast will have to be played from the videos section. This is covered on page 64 of the iPhone User Manual http://manuals.info.apple.com/en/iPhoneUserGuide.pdf
Jason

ILife 08 iWeb 08 - Podcast Not Working HELP!

I may not have explained myself in my last post, so I'll try again. o.k. Who has had a problem with the new 08 stuff? I am not a computer genius and do my podcast in garageband, share it with iWeb, and publish with .mac. I am not good at code and have gone this route becasue it was being done for me. Since changing to 08, my podcast stopped working. I spoke to the "Genius" at the Apple store and he helped my change my website by removing the "iWeb" from the forwarded address. Now my website works. However, he had no clue on how to change this in iTunes. How can I get iWeb 08 and iTunes to work together to play my podcasts again? Any help would be apppreciated. My URL from the iTunes store is: http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=264963988

Godaddy installed the
m4a MIME type on my hosting acount
Very useful info that some servers need this to be done! It would be nice to know exactly how they did it, but I suspect it was an addition to the .htaccess file along the lines of
AddType audio/x-m4a m4a
AddType audio/x-m4b m4b
If you can see the .htaccess or .config file in your space I would be interested to know if it says something like this.

Oracle.ifs.admin.export.ExportUsers NOT working in SILENT mode

I'm trying to export my CMSDK users via the commandline script (since the GUI tool MAKES YOU SELECT EACH USER ONE AT A TIME!!!) but it is not working. The CMSDK doc incorrectly tells you to run oracle.ifs.admin.export but I've found that you have to run ...ExportUsers. However my def file has the runsilent attr set but the GUI app still pops up???? Below is my script
#!/bin/sh
IFS_ROOT_HOME=$ORACLE_HOME/ifs
export IFS_ROOT_HOME
. $ORACLE_HOME/ifs/common/bin/ifsunixcmds
. $ORACLE_HOME/ifs/cmsdk/bin/system/ifssetenv
CLASSPATH=${IFS_CLASSPATH}
export CLASSPATH
java -Xmx64M oracle.ifs.admin.export.ExportUsers /d01/app/oracle/product/oas904mid/ifs/cmsdk/export/export-users.def
And here is my def file...
IFS.EXPORT.RunSilent=true
IFS.EXPORT.Username=system
IFS.EXPORT.Password=manager9ifs
IFS.EXPORT.Service=IfsDefault
IFS.EXPORT.SchemaPassword=gapp1969
IFS.EXPORT.LogFile=export-users.log
IFS.EXPORT.USER.ExportedUsers=bdillon
IFS.EXPORT.ExportSetName=dev-users
IFS.EXPORT.ExportToPath=/d01/app/oracle/product/oas904mid/ifs/cmsdk/export/
IFS.EXPORT.ExportTreeSize=50
IFS.EXPORT.USER.GetAllAncestors=true
IFS.EXPORT.USER.GetDirectAncestors=false

Pl see your other thread here - libxp.so.6
You cannot terminate an install before successful completion and expect things to work flawlessly ;-)
Srini

Export function not working in Internet Explorer

so i've got a report displayed in IE, but when i go to export to any file format, IE opens a new tab and that's it. depending on certain settings (like adding the server to intranet zone), i can get the new tab to say nothing or "Blank Page".
i've tried adding the server to the safe zones, i've played with some tabs settings, i enabled the "run active x" options...
finally i reset all settings of IE to their defaults. i still can't figure out what i'm missing. if i copy the url to another browser the export works fine, as expected. on another machine i found this "rsclientprint 2008" addon so i downloaded
that but i still got nothing.
on a working machine, when i click the export button, a new tab opens with the name of the reporting server in it, it thinks a bit, then that tab closes and i get the "open or save" message in the original tab. on the one that's not working, it
opens the new tab, DOESN'T show the server name and that's the end of it. so it seems like it can't connect to the server on the export function. (but report creation works just fine)
anyone know of anything glaring that i'm missing??
~if this were /. this sig would be funny

good call - i'll try that now.
the app i had installed before was Classic Shell so that Windows Explorer's (win7) left hand pane doesn't jump around on you when you double click.
i just completely uninstalled the application and rebooted. still nothing.
going to do a repair while classic shell is uninstalled. brblol
UPDATE:
so i couldn't run the IE installer (per MS suggestions) because i have a newer version. so i tried the fixer that i found here:
http://support2.microsoft.com/mats/ie_performance_and_safety
and it found the following "errors":
Issues found
Data Execution Prevention disabled
Detected
Enable Data Execution Prevention
Not Run
Security settings
Detected
Reset Security settings
Not Run
Pop-Up Blocker disabled
Detected
Enable Pop-Up Blocker
after fixing, the problem still exists!
~if this were /. this sig would be funny

Import/Export statement not working..

Hi all,
   I want to export some data from BADI & Import it back in user exit.
I wrote following line of code in BADI
       export P1 FROM xstr to memory id 'ZABHI'.
& following line of code in User Exit
      import P1 to xstr FROM memory id 'ZABHI'.
After export sy-subrc becomes 0 hence export statement is working fine but when aftr import xstr remains blank.(sy-subrc = 4)
I tried to execute same code in single ztest abap program & it works fine there.
Thanks in advance.

hi abhijeet,
you are most welcome....
to delete, use
** deletes the data to save wastage of memory
delete from database indx(xy)
client sy-mandt
id 'ZABHI'.
you need to delete it coz, its available to all programs in the R/3
server via the ID and you don't want anybody to view the data u are
sending into memory.
the statement that u used earlier was program specific and hence
not accessible to the user exit.
Regards,
Samson Rodrigues.

Report Export - Spreadsheet not working for one User: ECC6, SAPGUI710

Hi,
Our setup: SAP ECC6, Solaris10, Oracle 10g, SAPGUI Patch 9
Normal download like List ->export ->Local file is working
But when user click excel icon (list ->export->spreadsheet) it is not working and even it is not giving any error message.
Only one user ID we are getting problem, all other user ids are ok.
There is no issue with his work station or SAP GUI patch level as for other user id on his workstation export function is working fine. One more info with this problematic user id export function is not working in any workstation.
Any thing we need to do with user parameters/user settings or authorization????
Anyone faced this problem eralier . . .
Advance thanks

It is not hte problem with workstation, as for other user ids on his workstation working fine. Also with his user id on other machines also not working.
Regarding trace in ST01, how to switch the trace for other users as there is no user selection option???
Is it ok if I procedd as below:
1. ST01 -> Edit menu ->Write to database
2. Selected all trace components
2. General Filters ->under "Trace for User Only" I give this problematic user id.
3. From menu "Goto" ->"Save Trace file in" I give this user id, client and time
But I am getting following message when I click "Analysis"
No records that correspond to these search criteria found
regards

Podcasts not working properly?

Nano 7thG Podcasts will either stop part way through or will skip and repeat the beginning. I've tried 5 different podcast's all from different people..

Noel Holland wrote:
For reference: The video podcast I was having problems with now displays correctly after Apple posted the 1.1.2 update for the iPod Classic.
Perhaps that's why Apple posted the update!
You are probably correct when you suggest that "third party software generating the podcast not being configured correctly and creating a corrupted video file" has something to do with it. Maybe the people who create the Apple Quick Tip of the Week haven't checked to make sure what they do actually works.
I had a video (converted by iTunes for the iPod) that caused my iPod 160GB to crash, twice. Since that video was not that important to me, I removed it and it will not go back on regardless of software updates. These things happen. However, to someone like me who grew up with vinyl records, the iPod is fantastic!
Regards,

Export Button not working properly in custom OAF page.

Hi,
I have a custom page with a table region is there. There is an export button which exports the rows in an excel sheet.
But it is not working properly, as all the rows are not getting extracted.
Properties set for the export button::
Export all rows :: False
Any sugestion is highly appreciated.
Regards,
Arindam.

Hi Arindam,
Refer below links.
Mukul's Oracle Technology Blog: Implementing Export Button Functionality Programatically
http://dilipoaf.blogspot.in/2013/02/export-selected-rows-data-functionality.html
Thanks,
Dilip

Export Funtionality not working in R12

HI,
We have some custom forms that we have upgraded to R12.
But the export funtionality is not working for these forms.
When we open the form, standard funtionality like Menu> Record> Last are not working in R12.
Any body can please help in this.

Hi,
Does this happen with all forms (custom and standard)?
Please see if the documents referenced in this thread help.
Export to EXCEL doesnt work
Export to EXCEL doesnt work
Regards,
Hussein

Export functionality not working in R12

HI,
We have some custom forms that we have upgraded to R12.
But the export funtionality is not working for these forms.
When we open the form, standard funtionality like Menu> Record> Last are not working in R12.
Any body can please help in this.

You should post your question in the eBusiness-forums, maybe here OA Framework

Export Podcast Not Working

Similar Messages

Maybe you are looking for