Export Problem: GB exports a file...but it's empty!

I've got a 60 minute interview on one track that I'm trying to export. Regardless if I export it to disc, iTunes, compressed or not, the exported results are a 4KB file that is empty and lasts zero seconds upon playback.
I've tried shortening the name of the clip, file...still nothing.
Anyone?

http://www.bulletsandbones.com/GB/GBFAQ.html#longpodcastfailstoexport

Similar Messages

InDesign CS5 causing problems with InCopy assignment file but not content files

I'm having a strange InDesign/InCopy CS5 issue (Mac OSX 10.6.6; all system & Adobe updates are current). In my InDesign doc I have one assignment file containing two content files. All of the InCopy pieces work fine in InDesign (i.e., I can check out/in, edit, etc.). When I go to open the assignment file in InCopy, InCopy starts to open it but then crashes. If I try to open each content file directly in InCopy, no problem. I've tried deleting and recreating new assignments in InDesign, but they all have the same result in InCopy.
I think this actually is a problem with the InDesign file because if I export the InDesign file to IDML, then try to open the IDML file, InDesign crashes! I've trashed my InDesign preferences, made sure all cross-references are up to date, etc. Anybody have any ideas what else to look for in my InDesign file that might cause this problem?
Thanks!
Andrea

Thanks John!
1) Here are the first 10-ish lines from the crash report that is generated when I try to open the IDML file:
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   ???                               0xa0c266f0 _XHNDL_trapback_instruction + 0
1   com.adobe.InDesign.Indexing       0x20778192 GetPlugIn + 341394
2   com.adobe.InDesign.Indexing       0x20779009 GetPlugIn + 345097
3   PublicLib.dylib                   0x0129228b CScriptProvider::AccessProperties(IScriptRequestData*, IScript*) + 571
4   com.adobe.InDesign.Scripting      0x1f4befe8 GetPlugIn + 166440
5   com.adobe.InDesign.Scripting      0x1f4c2e31 GetPlugIn + 182385
6   com.adobe.InDesign.INXCore        0x20641444 GetPlugIn + 45220
7   PublicLib.dylib                   0x0142c9e8 CScriptDOMElement::GetMultipleAttributes(K2Vector<IDType<ScriptID_tag>, K2Allocator<IDType<ScriptID_tag> > > const&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > >&) + 280
8   PublicLib.dylib                   0x0142bd38 CScriptDOMElement::InsertProperties(adobe::version_1::vector<KeyValuePair<IDType<ScriptID _tag>, ScriptData>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, ScriptData> > >&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short, short) + 1336
9   PublicLib.dylib                   0x0142beab CScriptDOMElement::SetSimpleAttributes(adobe::version_1::vector<KeyValuePair<IDType<Scrip tID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short) + 91
10 PublicLib.dylib                   0x0142c0d3 CScriptDOMElement::SetAttributes(adobe::version_1::vector<KeyValuePair<IDType<ScriptID_ta g>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&) + 51
11 PublicLib.dylib                   0x0142a2ea CScriptDOMElement::SetAttribute(IDType<ScriptID_tag>, DOMAttributeValue const&) + 202
2) That works. Moved all pages (frame threading was preserved) to a new doc, exported to IDML, opened new IDML file just fine. Woo hoo! One of my editors won't be pleased that all of the tracked changes have disappeared, but at least the file functions now
Wish I knew what caused the problem in the first place so we could (hopefully) prevent this from happening again. Any ideas?
Thanks again for your help!
Cheers,
Andrea

Exporting a file but the page is a blank pdf..

Hi all,
Im having trouble exporting my document at the moment. I do the usual file, export, save etc.. then when i open the pdf it is just a an almost blank page with everything missing.
This has never happened before. Could it be because I have overlapped too many shapes on top of one another? And this is causing them not to show up? I shtere a limit on how many or something?
Very confused..

OK gentlemen, my apologizies...I just don't see the reason why you'd want to change a PSD file into a PDF. But I am a web developer and less a designer. PDFs mutability can be tricky and time consuming. Anyway, here is another thing to try:
first you export your layers as separate files. second you create a pdf form the separate documents. for example in PS:
1. File/Scripts/Export Layers to Files...
2. File/Automate/PDF Presentation...
i'm sure there is an easier way to do this, will post it if I'll think of it.

QuickTime X - Export creates file but then deletes it

I have very strange export behaviour now on QT X, when I use 'Save As' to compress a .mov file (select Save As, give a destination file name, then select format as 480p), it all appears to work but as the export progress bar completes the destination file disappears.
As the export starts a zero byte destination file is created. While the export is happening 'ls -la' shows a temporary file being created and growing, but as it completes, when you'd expect the temp file to replace the destination file, both are deleted.
No errors seem to be reported to the screen or to syslog.
It worked fine once I'm sure, but now it fails every time. Could I have I messed something up or has anyone else seen this?
Cheers,
Dan

I was delighted that QuickTime X captured the screen and audio of my first lecture and exported just fine. However on the next try it appeared to be working in just the same way (Stop Recoding in Menubar until clicked) but not file was created at the end.
Most frustrating. Does anyone know where the temporary files are stored in case it is lurking somewhere?
Nick

IWeb site update problem-app missing images/files, but site is ok

I created and uploaded a web site to my .mac (yeah, MobileMe) and it displays just fine. I have visited it from a couple of different comps. The problem is that I want to add/update files/pages, but when I open iWeb, several of the images/audio files do not display: shows a x-through and a centered question mark. They are in the sites idisk folder and in the laptop's copy of the files. When I try to replace the missing images/files by dragging onto the iWeb drafting page the following message appears: "the file can't be used because you don't have access privileges, or because it contains no content or was corrupted."
I'm afraid to make any updates for fear of losing what is already published.
Extra info: have family pack and am switching between .mac accounts because iWeb published to the iDisk corresponding to the account/sub-account you are logged into (BIG pain in the ***! It should have a password protected account toggle like Panther used). I have double-checked that the files for this site are only in the one iDisk account (am redirecting my masked domain url to the .mac iDisk server-works great.
Any ideas?

The upgrade from '06 to '08 which changed the domain.sites to a domain.sites2 caused more confusion, disasters and lost web sites than the bug ridden introduction of '09.
I ended up rebuilding all my sites from new, blank domain files in '08 and the conversion to '09 went OK apart from '09's nasty habit of changing media file links.
Fortunately, I have very little QuickTime content and don't use the iWeb Photos, Albums Blog or Podcast templates.
Most iWeb built sites look pretty awful when users stick to the default page width. I start from a Blank, Black or white page and trash everything on it.
I use the "standard" 980 px page width and most, if not all, of the iWeb themes do not adapt to this.
This is why I constantly ask the question. "Do the iWeb developers actually build any websites with the application?".
Perhaps if they did, we would get more bug free releases and some of the features that "real life" users are requesting.

SMB-problem: can see/manage files, but cannot open from Windows 8.1

I have some files shares on a Mavericks server (clean install, including OSX Server). I can connect and see the shared files from my Windows clients (both 7 and 8.1). I can even create files, rename them, etc. From Windows 7 i can also open and edit them. So far, so good!
From Windows 8.1 however, opening does not work: simple text-files and pdf's don't open at all (server cannot execute instruction/file already open), office documents can only be opened in read-only mode.
In the System log (on OSX Server) are a lot of lines like: smbd[714]: File system does not support 0x0 time attributes (or does not support 0x400000, file attrs).
Using Windows Power Shell, I figured out that there is a SMB2.1 connection between Windows and OS X, which seems
to be correct. It appears that OS X judges that Windows is using one or more wrong parameters in an SMB-system call.
I had lots of SMB-problems using Mountain Lion (Snow Leopard server was fine). I don't want to force my Windows machine to use SMB1 (for all shares) using the commands found in http://support.microsoft.com/kb/2696547 (I didn't try yet).
Any help would be appreciated.

So I have the exact same issues. I actually called Microsoft Support and they tried a bunch of different things. They even tried disabling SMB 2 and 3 on my Windows 8.1, but then I was unable to connect to my OS X 10.9.1 Server share point at all anymore!
Here is what I found out. When I start up from my 10.6.8 Server backup on my Macmini Server, and then mapped the network drive on letter G on Windows 8.1 Pro client machine to that very same share point - worked like a charm. I can read , write and such all fines on that share. All is well. Leaving the Windows 8.1 client alone, on the macmini server I selected the upgraded 10.9.1 Server volume and restarted the Macmini Server. After restart, guess what, I was able to perfectly access the files from Windows 8.1 on the OS X share point which of course was still mapped as drive G on 8.1 from earlier.
Now here comes the kicker. I went ahead and restarted Windows 8.1 and then everything went haywire! I opened the Windows 8.1 desktop and brought up My Computer. I saw that the mapped drive G is no longer connected (red X). I went ahead and double clicked it and then Windows Explorer simply hug itself and wouldn't come back. I had to force quit explorer and ended up ultimately restarting Windows. After restart I went ahead and disconnected the mapped network drive (G), and then re-mapped it. I authenticated with the very same username and password as before. This time I am able to see all the files once again, but can't open or work with any of them. It is super jinxed. In my opinion there is a severe bug in Apples SMB 2 or smbx or whatever they call it. Why couldn't thy just leave it alone and pay a licensing fee and use Samba? It's just so stupid!!!!
Apple, you must fix this problem. I will tell the server tech that I have been working with the very same thing. They should have never release 10.9. It was premature and not ready for prime time. It's good to know that there is a work around however. It is super teadious, and spastic, but hey, at least I get it to work. Either it has something to do with authentication, or the way OS X 10.9 responds when mapping a network drive on windows 8.1 pro? No clue.
Apple does not pay me to Q&A their software. This stuff should simply work! I am ****** off and have wasted now over 3 weeks of my precious time banging my head against the wall with Apple stuff.
Come one guys, get your stuff straightened out. thanks.

Why does my exported mp4 file look so bad when it is viewed in adobe acrobat pdf file?

I have embedded an mp4 (exported from premier pro cs6) video file into adobe acrobat and its not sharp viewing of my video anymore. It was a sharp video when viewed in both premier and the exported mp4 files, but once embedded in acrobat it looses sharpness, anyone know what the problem might be? Could my settings in adobe acrobat be wrong? I would think the problem is in adobe acrobat since the exported mp4 video views crisp and clear before its embedded, any ideas to assure sharpness with my video after its embedded into the adobe acrobat pdf?
Hoping someone has an answer to this, I think my problem might lie within the adobe acrobat settings????
or maybe there is no way around and I need to expect this video not to look as crisp and clear after I embed it into acrobat.... as it is when viewing in premier pro, mp4, etc.????
Any helpful information would be greatly appreciated.
Someone Im sure is taking theri exported premier files and embedding them to create pdf files? Would love to hear if anyone has encountered this issue.
Thanks so much in advance for any help offered.

Hi Dave,
I just completed a test and comparison between the two PDF's,
compared the file as you suggested with the floating option and changing setting to actual size of the original premier pro / mp4 file size and
the old pdf that did not utilize the floating and file size option.
I do notice a slight difference. The PDF with the floating window with the match of the media clips original dimensions appears to be crisper.
I will be having the final pdf document set utilizing this method for the embeded mp4 movie and hope that the department doing this (next stage of this job) will agree that this is better to use your steps to embed all the video files into a pdf.
Thanks so much for your time.
Hope you had a happy holiday, and hope you have a very happy and healthy new year.
Thanks, Amy

Exported .ics files unreadable by *utlook

I have a need to export my calendar to a W*ndows machine at work, running Outlook. Outlook says that it can read .ics files, so I exported one of my calendars and tried it. In typically helpful fashion, Outlook said that there was "a problem" with my .ics file, but of course gave no clue what kind of problem.
Are there any issues about version numbers or format variants on .ics files that I should know about? Is there another way of exporting an entire calendar from iCal such that another app can import it?
Thanks
JEH
G4 iMac 20" Mac OS X (10.4.5)

Same here -- except Outlook and Outlook Express, Win 2000 and WinXP in various combinations all say the ics file is corrupt.

I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file). I'm on OS 10.5.8. Never had a problem with this before. What am I missing? Any idea

I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file). I'm on OS 10.5.8. Never had a problem with this before. What am I missing? Any ideas?

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Having problems when exporting .swf file as an animated gif

Hi:
I was wondering if anyone has ever had any issues exporting a
flash file as an animated gif? When I do so, the image quality is
very compromised and the animation is distorted. I know this is not
very specific question, but I have never encountered this issue
before, and I am trying to help a co-worker. I don't understand why
it looks exactly the way we want it to look as an swf file, but not
as an animated gif? Can anyone point me in the right direction as
to what to look for as the potential source of this problem? I have
the swf file, although this would not be very helpful as I don't
have access to the flash file (but I can send it to you if that
would help). We tried unchecking the feature to optimize the image,
and changed the color pallete to adaptive, but this didn't solve
the problem. I also tried removing any unnecessary layers prior to
the export. Basically, I'm not sure as to how to proceed and what
may be causing the problem. I also want to mention there is a
placed image on the stage. Could the type of image placed be
causing the problem when exporting to a gif file, but not as a
.swf? If anyone could help, I would really appreciate it! Thanks.
Sara

I also wanted to mention that the swf file uses sound. I am
reading an old book that I have on Flash and it's saying that Flash
and Shockwave Flash enter a special mode when they encounter a
stream sound in which the animation is forced to keep up with the
sound track, if the animation frames can not be drawn quickly
enough, some frames are skipped. I am also reading that the
animated gif format does not support sound. Again, the only
reference I have is for a very old version of flash, and I'm not
sure it applies to CS3. I am now just thinking that the sound may
be the issue.

After installing the latest version of iTunes , I can no longer export files from EZ Vinyl Converter to iTunes. I tried restoring an older version which accepted these files, but that version no longer will open my library. I have been archiving my albums

After installing the latest version of iTunes, I can no longer export music files converted by EZ Vinyl Conversion software to iTunes, which is the only export option available in the software. I have been converting my vinyl records, tapes and cd's to MP3 files in iTunes for about a year now, and have well over 1000 man-hours invested in this effort. I tried restoring the last version of iTunes, but it will no longer read my library, as, apparently, the new version modified the library file(s) in some way. I want to reenable this export-import function to finish my archival. What is necessary ???

Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

Indesign CS5 with PNG file exporting as a PDF file but the text is random bold

Hello,
I am looking for help to teach me how to solve this problem.
I use Indesign CS5 to make a proposal. I set the page marker and sub title in the master page.
Of course, there are including dozens of pages and some pictures here.
And one of these page, I place a PNG file and type some text.
When I export this file as a PDF file, one page, which is including PNG file, the text becomes random bold.
Therefore, I have used PSD file to cover the PNG file. But finally getting the same problem.
So does anyone can help me how to solve this problem?
Thanks so much for your help.

This sounds like a known issue with transparency on the page. When transparency is introduced ID uses a differnt method, apparently, of rendering text on that page and it appears bolder on screen and can print that way on low resolution devices like desktop printers. It usually is not a problem on press output.
The only way to mainatian consistency would be to introduce transparency on all pages, perhaps by adding a transparent object to your master page.

Major problem: I can not export NEF files from Lightroom

This is just plain weird: I can't export NEF files from Lightroom 2. I can export any other file format, but not NEF. With Lightroom 1 this was no problem.
It makes no difference whether I choose the export command with my mouse, via the menu or with a key stroke - nothing happens.
Lightroom version 2.0
Camera Raw version 4.5.0.175
Camera Nikon D3
Photoshop CS3 version 10.0.1
MacOsX version 10.5.4
I've called Adobe, and they simply don't know. I have reinstalled Lightroom 2 with no succes. Restarting, repairing permissions, nothing helps.
Any ideas will be greatly appreciated.
Marsel

Marsel, your language is confusing, First, you cannot 'export' NEFs to PS. You can send a copy there from within LR as a tif or psd.
Exporting per se takes place through the Library module under the Export function. When Nef's are exported by choosing 'original' in the export dialogue, the file is the 'original' NEF accompanied by an XMP. That Nef, if opened directly in PS from your file system should appear in the Camera Raw window, where you can make whatever new edits on it you want or change the original adjustments you made in LR. Then, once you open that file in PS from the Camera Raw window, any further work you do will be pixel editing. That work can then be saved in a number of formats, but not as a NEF.
Transferring files to PS from LR for editing is another matter. That sends a copy of the original NEF, including LR adjustments to PS as either a Tiff or a PSD (your choice via the dropdown). After you have edited that Tiff or PSD in PS and hit save, it will send a copy back to LR as a Tiff or PSD, which will appear next to the original nef.
These procedures work perfectly on both my windows 32 and 64 bit machines with LR2 and 2.1. with all my NEFs from several camera models.
When you say 'export' do you really mean sending a copy to PS or do you mean 'Export' as LR defines that term?

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

Newbie - Problem exporting vob file in Toast 7

Grateful for any help here - am a newbie and getting v confused.
I have recorded from a small cam recorder of a friend of mine onto dvd R since it didnt have firewire.
Was hoping to then be able to edit it in iMovie but it couldnt read the file.... then after searcing around forum saw that people recommended Toast 7 to do this conversion and that the problem is that the file is a .vob file and i need .dv??? for iMovie (am i correct?).
Bought program for $80 which seemed pretty steep then followed instuction from forum to drag on to video box but for some reason the export button is never highlighted so cant follow instructions
Guess there is something real dumb that i am doing but cant spot it since this is all a bit new to me

In order to read a .vob file once it has been decrypted from a DVD, you will need something like the QuickTime MPEG-2 plug-in, which is a separate purchase (because of licensing considerations) from Apple. Check out this link:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/0.RSLID?mco=B E1CED27&nplm=D2187Z%2FA
For more information on pulling video off of a DVD, check out this link:
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
If you find this helpful or if it solves your issues, please indicate this by clicking the appropriate icon in the header of this reply.

Export PDF file updating but never completes the export - already turned off OCR capability

Export PDF file continues updating but never completes the export - already turned off OCR capability

John-
I wish I had something helpful to add but I can merely say that I am seeing the exact same problems on Aperture 3.0.3, MacOS X 10.6.3 with my quad-core i7 iMac (8GB RAM, 2.8Ghz).
The export I am attempting is:
RAW from Canon 50D >export> Email Medium - JPEG (image quality 8, 1024X1024, 72dpi, sRGB, include metadata)
With these adjustments:
RAW fine tuning
Retouch (brushed)
Exposure
Enhance
Curves
H/S (brushed) x2
Color
B&W
Sepia
Dodge (brushed) x2
Blur (brushed)
Definition
Skin Smoothing (brushed)
I am seeing some of the same side effects as others: must force-quit, can add/adjust effects but the preview updates are basically stopped.
In some instances, I've quit the app to find an export in the location I placed it but that's only happened sporadically.
I dearly hope the fix is coming...

Export Problem: GB exports a file...but it's empty!

Similar Messages

Maybe you are looking for