EXPORT Problem. when i choose USER mode, it is exporting full database

Dear OTN Members,
we have a system ORacle 8i, 8.1.3 database, we created a user with DBA role, when we want to export data for a perticular user, after giving USER MODE Option, it is doing full database export including sys, system etc.
what is the reason?
Thanks in advance

Any ideas please,
Still im looking for this solution. I have a " user" with DBS role, we are trying to export only this user, it is coming up to type of mode like
1)E ntire database 2)U 3) T ables >
we are choosing user mode, but all the time it si taking Entire databse, including, Systtem and other users eetc.
im struggling since 20 days. no success. Please

Similar Messages

PDF Export problems when viewing with Preview 4.2

Hi Everyone,
I'm an Indesign novice for sure, so this may be fairly basic to a lot of you, but I'm having problems with a document of mine. I've built my portfolio in indesign using PNG images from my book. In Indesign I've applied the gradient feather to each image to give it a reflection. When I export the book with no compression, it's too large, so I've tried regular JPEG compression (at maximum) and JPEG 2000 compression at lossless and I get better file sizes, however when I view the PDF in preview there's 2 problems:
1. The images look like crap no matter what with any compression applied. Very blurry, pixelated... generally looks like crap. In Acrobat, everything looks sharp and beautiful.
2. The reflections don't exist at all. There's just an upside down version of the image there with no transparency whatsoever.
I need it to look good in both programs because it's impossible for me to control who's viewing my book in what program. It's so odd because a year ago when I built my portfolio in keynote, it looked beautiful in preview, but like crap in Acrobat.
Any ideas?
Thanks!

I can understand the gradient feather not appearing properly, and I can build the reflections into the original PNG if I must, but any idea why the images look so bad? They look fuzzy, and far from sharp with ANY any compression. The only way an exported PDF looks ok in preview is if I export it with no compression at all. Yet when looked at in reader, they look sharp (even with compression).

Problem when printing on draft mode with hp6500a

Hello
this is the problem : when i want to print in draft mode, the document is resized in bigger like zooming...
work normally in normal mode
what's wrong ?
i made all the check (hp diagnostic utility) and everythings are ok
is someone has solution ?
thanks in advance

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Problem when adding ascx user control in the MasterPage: Parser Error Message: The referenced file ... is not allowed on this page.

Hello,
I have to maintain a SharePoint 2010 project, in which a TopNavigation User Control for SiteCollection is registered in the MasterPage in this way:
<%@ Register TagPrefix="ABC" TagName="TopNavigation" src="~/_layouts/ABCApplication/MainSite/Navigation/TopNavigation.ascx" %>
<asp:ContentPlaceHolder id="PlaceHolderTopNavBar" runat="server">
<asp:ContentPlaceHolder id="PlaceHolderHorizontalNav" runat="server">
<ABC:TopNavigation ID="TopNavi" XMLDataLocation="/_layouts/ABCApplicatopm/MainSite/TopNavigation.xml" IsRoot="true"
runat="server" />
</asp:ContentPlaceHolder>
</asp:ContentPlaceHolder>
When I deploy the SiteCollection, the TopNavigation user control is working correctly. Unfortunately when i modify the masterpage over SharePoint Designer, the following error message comes allways, regardless of the art of changes i did in the MAsterPage
( even if I open the MasterPage, add an space and do save/close the MasterPage).
"Problem when adding user control in my custom master page, Parser Error Message: The referenced file '/_layouts/Navigation/TopNavigation.ascx' is not allowed on this page."
Any ideas?

Hi Simon,
When we use UserControl in SharePoint Page or MasterPage, and the UserControl is kept in any folder other than ControlTemplates, we will got the error. Here is an article about this issue and provided the solution:
http://sharepoint-tina.blogspot.com/2009/07/referenced-file-pathxyzascx-is-not.html
The solution can also be used in SharePoint 2010.
Qiao Wei
TechNet Community Support

Export problem when using a lot of large medias in a premiere project.

Hi !
My premiere/media encoder have a weird comportment when I use a lot of large media in the same project :
- has I import more media (avi uncompress out from aftereffect) in my project, my exports are getting slower and slower (lag before the progress bar start moving)
- the files I export are getting bigger and bigger !
- when I reach about 20 gigs of total medias size, I'm totally unable to export with media encoder (the software freeze after I launch the queue) and have to open the project in after effect to do the export (with the same weird lag before the progress bar start).
I have to precise that I'm aware that longer montages are heavier once exported.
I'm speaking of exporting 30sec montage, same sound, comparable background, colors, image type and camera moves.
the only difference is that in one of the montage I use 3 footage and in the other 14.
The weight of the export (FLV in most of my tests, but the same thing happen in mp4, f4v...) is sometime 3X the expected weight.
Exporting the video uncompressed and then compressing the it with media encoder (FLV birate 700) give the same result (a 10meg file) and a weird lag before the progress bar start moving.
Exporting the video uncompressed and then compressing the it with sorenson squeeze (FLV bitrate 700) give a good result (a 3meg file).
I have to use 720p uncompress media for my montage as the video would be use for television, not only internet.
I tried to export the file with other computer and have the same result.
I'm working on a PC, intel core2 quad CPU Q6600 2.40Ghz. 12GB of RAM, winvista 64bit,
graphic card : Nvidia quadro FX 570 256mb
Thank you.

which operating system?

IPhone 4S Problem - When I enter Camera Mode, feint purple lines begin converging into my photo and LED won't turn on, only during videos! Please Help?

Hello Guys,
I am in need of dire assistance! Bought a new iPhone 4S 64GB Black through my Carrier, Optus in Australia.
Everything seems to be working perfectly, besides my camera. When i enter it, a feint purple begins to appear with my photos, and the LED flashlight wont appear when i take photos with front camera, it will only turn on when i activate an LED flashlight app and when i turn on flash when i record videos!
Does anyone else have this issue? If so, can someone tell me if its a hardware issue and needs to be replaced, or it can be updated and fixed with a software update?
Thank You!

I believe your only option is making an appointment at an Apple store if there is one nearby where it can be determined if your iPhone can be restored with iTunes there.
If not, more than likely there is a hardware problem with no way to know what the problem is without being diagnostically tested.
Apple doesn't offer a menu of repair services for the iPhone except for replacing the battery for an iPhone that is no longer under warranty. Apple offers an out of warranty or not covered under the warranty "repair" price, which pays for an exchange at a discounted price off the full retail sales price ($199 plus tax) which doesn't require signing a new two year contract with AT&T.

Problem when WCS creates user guest access on the WLCs

Hello,
In my Wireless network, I have two appliances WLC 5508 running version 7.0.116.0.
I have a WCS running version 7.0.172.0, deployed on a windows 2003 server.
I've imported the two WLCs in my WCS in order to centralize the monitoring and the configuration tasks.
Now I'm facing an issue when I want to create a guest user from the WCS, rather than creating this user access on each WLC.
The creation of the user account is working good, the replication is done on the both WLCs, but on one of my WLC the guest user account is deleted after one hour(around).
On the second WLC, the same user account remains during all its life time.
In attachment a screen shot of the advanced parameter of the guest user.
You can see that the user was created on the both WLC but is only active on one ... and unfortunately the wrong because the AP is associated with the other WLC.
Any idea about this issue?
By advance thanks.

Thank you for sharing the info. I am glad that your issue is now fixed
Sent from Cisco Technical Support iPad App

User Mode to be used in OLT

Hi,
We are testing Oracle E-business suite application which involves online transaction entries comprising Web-ADI & usage of Oracle Forms. During test run in OLT,iam confused on choosing user mode (Thin/Thick/Java client).
At present we are using Java client as user mode.
Is it correct?
Will wrong selection of user mode would affect performance of both OLT server and test agents?
Please do clarify me.
Thanks in advance
Regards,
Mahesh.S

Hi Mahesh,
I assume you are using 9.1 at the moment - in 9.2 you won;t get this option as you can only use OpenScript to generate the scripts for use in OLT. These 'modes' come into play when using OFT (now removed from OATS in 9.2) as your script recorder and they represent whihc client is needed for your VUs. 'Thin' is a lightweight, scalable http engine, and 'Thick' is a full browser client. 'Thick' was hardly ever used for load testing as it requires too much resource. Java client is a Java version of a thin client http engine. If you are using OpenScript then it just leave it as Java client.
Regards,
Jamie

Freeze in Single User mode

Hi, my iMac G5 is freezing right away when I boot in single user mode. I mean right away at the prompt. I cannot even start typing anything. The fan start at 100% and I have to hard shutdown the machine. This happens ALL the time I boot in single user mode. EVERY TIME no exceptions.
I am trying to run a memory test (using MEMTEST) to see if my 1gig memory is defective. My iMac freeze randomly without me able to find a consistent pattern.
Questions:
1- Does the freeze at boot could be a problem with me using a bluetooth keyboard and mouse?
2 - If not, the fact of freezing at boot in Single User mode a possible explanation of memory problem (does the single user mode lock-up memory that could be bad?) as my iMac do not freeze (for a while) when booted in multi-user mode.
My setup: 2 ghtz iMac G5, 1x1gig Kingston PC3200 memory (sold and installed by my Apple reseller). My G5 is 7 month old still under warranty.
I am new to the Mac - I switched from PCs.
Thanks for the help.
iMac G5 + Thinkpad T40 Mac OS X (10.4.2)

With the PC-Viewsonic keyboard, Pierre, the symptoms you describe are exactly what you would expect.
Third party, non Apple, keyboards, even wired ones, can't usually be used to do anything beyond simply starting up in SU mode (you can start them up and get to the prompt, but when you are there you can't do anything further).
The same applies to Apple Wireless keyboards when running versions of the OS 10.4.2 or earlier, or if the bluetooth firmware isn't up to date. Again, you CAN start them up in SU mode, but you can't do anything with them after you reach the prompt.
As far as the BT issue goes, as you say its running 10.4.6 I'm beginning to wonder if there was a problem with one of your OS updates. I'd be inclined to download a fresh copy of the full 10.4.6 Combo updater, and run it again. Probably worth running the Blue Tooth firmware update again, too, just in case.
Rod

Problem with syncing AD users (LDAP)

I am running into a 'problem' with syncing users from ad. I'm pretty sure i'm doing something wrong but i can't figure it out.
When i sync manually the 'pop up' shows that it's synchronizing and after a few seconds it tells me "OK". But there are 0 users imported.
http://www.dualdude.net/bm/run_ldap_sync.jpg
The connection and credentials to access the AD work since they are also used for Zarafa and Samba AD synchronization. The AD is running on an Windows Server 2008 Enterprise x64 machine.
This is a screenshot of the configuration used:
http://www.dualdude.net/bm/ldap_config.jpg
Any thoughts on what i'm doing wrong?

I got the same problem when using groupfilter:
User Filter: (&(|(objectClass=Person)(objectClass=orgPerson)(ob jectClass=inetOrgPerson))(groupMembership=cn=users ,ou=org,o=firma))
Group Filter: (&(|(objectClass=group)(objectClass=groupOfNames)( objectClass=groupOfUniqueNames))(|(cn=G4)(cn=TC*)) )
Do you use groups for the allowed users in teaming?
>>> lnijhuis<[email protected]> 14.01.2010 16:36 >>>
Thank you for your reply. I guess the comma's should be right. When i
change the first "ou=" in the Base DN to "cn=" the error message states
that the best it can do is reach
ou=OrganizationalUnit,dn=domain,dn=local. So i guess that shouldn't be
the problem?
By default there is a container "Users" in AD, which we don't use. The
person that configured the server created an OU on the same level as the
default container. THe name of this OU has a space in the name, like
"Organi Zation". This OU contains another OU called Users. This is where
the users are located. When i run the ldap query i don't get any errors
about the base DN. It does when i change it.
The full filter is:
(|(objectClass=Person)(objectClass=orgPerson)(obje ctClass=inetOrgPerson))
lnijhuis
lnijhuis's Profile: http://forums.novell.com/member.php?userid=63756
View this thread: http://forums.novell.com/showthread.php?t=397993

Single user mode session lost after backgound processes jump in

We have an application running on SQL server. This application restores DB very frequently using Single user mode. Following are the SQLs that are executed to restore the database in single user mode and to get the database back in multi user mode.
alter database [test-db] set single_user with rollback immediate; --This sql is run using test-db
use master;restore database [test-db] from database_snapshot = 'snapshot_test-db';
alter database [test-db] set multi_user;
After switching the test-db to single user mode some 4-5 background processes of Taskmanager jump in for the test-db kicking off the session that application has taken over in single user mode . These background process are deadlocked between them selves.
Please refer to the output of sp_who2 below at link.
http://social.microsoft.com/Forums/getfile/200625
and following is the deadlock XML.
NOTE: SPIDs in deadlock XML may differ from the output of sp_who2 as spids keeps on changing for these processes.
<deadlock-list>
<deadlock victim="process4bbfc78">
<process-list>
<process id="process4bbfc78" taskpriority="0" logused="10000" waitresource="DATABASE: 5 " waittime="705" schedulerid="1" kpid="1648" status="background" spid="22" sbid="0" ecid="0" priority="0" trancount="0">
<executionStack/>
<inputbuf>
</inputbuf>
</process>
<process id="process6d44388" taskpriority="0" logused="10000" waitresource="DATABASE: 5 " waittime="419" schedulerid="1" kpid="5796" status="background" spid="30" sbid="0" ecid="0" priority="0" trancount="0">
<executionStack/>
<inputbuf>
</inputbuf>
</process>
<process id="process6d44718" taskpriority="0" logused="10000" waitresource="DATABASE: 5 " waittime="109" schedulerid="1" kpid="3908" status="background" spid="16" sbid="0" ecid="0" priority="0" trancount="0">
<executionStack/>
<inputbuf>
</inputbuf>
</process>
<process id="process4bbee38" taskpriority="0" logused="10000" waitresource="DATABASE: 5 " waittime="313" schedulerid="1" kpid="2656" status="background" spid="15" sbid="0" ecid="0" priority="0" trancount="0">
<executionStack/>
<inputbuf>
</inputbuf>
</process>
</process-list>
<resource-list>
<databaselock subresource="FULL" dbid="5" dbname="unknown" id="lock4671600" mode="S">
<owner-list>
<owner id="process6d44718" mode="S"/>
<owner id="process4bbee38" mode="S"/>
</owner-list>
<waiter-list>
<waiter id="process4bbfc78" mode="X" requestType="wait"/>
</waiter-list>
</databaselock>
<databaselock subresource="FULL" dbid="5" dbname="unknown" id="lock4671600" mode="S">
<owner-list>
<owner id="process4bbfc78" mode="S"/>
</owner-list>
<waiter-list>
<waiter id="process6d44388" mode="X" requestType="wait"/>
</waiter-list>
</databaselock>
<databaselock subresource="FULL" dbid="5" dbname="unknown" id="lock4671600" mode="S">
<owner-list>
<owner id="process4bbfc78" mode="S"/>
</owner-list>
<waiter-list>
<waiter id="process6d44718" mode="X" requestType="wait"/>
</waiter-list>
</databaselock>
<databaselock subresource="FULL" dbid="5" dbname="unknown" id="lock4671600" mode="S">
<owner-list>
<owner id="process4bbfc78" mode="S"/>
</owner-list>
<waiter-list>
<waiter id="process4bbee38" mode="X" requestType="wait"/>
</waiter-list>
</databaselock>
</resource-list>
</deadlock>
</deadlock-list>
On searching for this problem I found out that people have faced similar problem but I was unable to find out the root cause and debug steps for this problem. Stopping the SQL server is provided as a solution to kick out these background processes but this
is not a feasible in our case as code to restore DB runs very frequently resulting in this problem at a good frequency.
I also made sure that SQL Server Agent is not running. The SQL services running on server are SQL server, SQL Server Browser and SQL Server VSS Writer.
Any help will be appreciated as this is a blocker problem.
Thanks,

Hi Amrita,
We can open a transaction, make data modifications to generate a lot of transaction log, and then run ALTER DATABASE AppDB SET MULTI_USER in the same transaction. You can also refer to the following document:
Getting out of single user mode:
http://blogs.msdn.com/b/dfurman/archive/2012/01/20/getting-out-of-single-user-mode.aspx
Allen Li
TechNet Community Support

Oracle 8i Export problem

hi,
i am trying to export a user 'tjprd' using the exp uttility of oracle 8i Release 8.1.5.0.0 and getting problem while exporting synonyms...following are the lines from
the log file:
Connected to: Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
Export done in WE8ISO8859P1 character set and WE8ISO8859P1 NCHAR character set
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user TJPRD
. exporting object type definitions for user TJPRD
About to export TJPRD's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export TJPRD's tables via Conventional Path ...
. . exporting table S_WORKORDER_ITEM 486 rows exported
. exporting synonyms
EXP-00008: ORACLE error 904 encountered
ORA-00904: invalid column name
EXP-00000: Export terminated unsuccessfully
I will be greatful if anyone can help me.
Thanks
Imran

Check for synonyms named DBMS_JAVA and DBMS_JAVA_TEST. If there is a synonym by either of these names, but there is not a corresponding DBMS_JAVA or DBMS_JAVA_TEST package, drop the synonym and rerun the export.

What is this error message in single user mode?

When in single user mode, I was given this message at the prompt
:/ I have no name! #
If you want to make modifications to files
/sbin/fsck-fy
/sbin/mount-uw
:/ I have no name! #
HOW DO I FIX THIS?

Firefox's Error Console (Ctrl+Shift+J) collects lots of those style rule warnings. Some style rules only work in particular browsers (such as "filter" which is for IE), so Firefox notes that it doesn't recognize them. This information is more for the web developer's benefit than yours, since you can't do much to change the site.
To see serious errors and filter out the style warnings, click the Errors button at the top. Hopefully a lot less clutter.
Anyway, are you asking because something isn't working correctly?

Stuck keys in single user mode

I am running Solaris 2.6. on an Ultra10. When in single user mode, I am getting "stuck keys". If I type a y to answer a question, I get yyyyyyyyyyyyyyyyyyyyyy. If I try to delete some of the repeated letters, the delete key removes them all.
What's up with that? I am trying to perform a restore, and need to be in single user mode.
Thanks for any help,
Phil

Welcome to  discussions, shaolson.
Have you done anything recently that could have caused this?
What Operating system do you have 10.2, 10.3, 10.4 ??
1. Try starting up in safe mode, by holding down the Shift Key.
2. else, if you can get the Install DVD in, startup using the 'C' key to boot into the Install DVD and run repair Disk from Disk utility. I know you have already tried fsck in single usermode, but the benefit of using Disk Utility is you can get useful feedback about what it has done.
The procedure, in case you are unfamiliar with it is;
To do this: Insert the Install Disk 1 into the drive and then select Restart; when you hear the chime hold down C key until the apple logo appears.
This will take you to the installation software, but you do not want to install.
Select your language, then go up to the top menu bar to Utilities in 10.4 (or Installer in 10.3) and navigate to the Disk Utility application.
Select the start up drive, then go to the First Aid pane where you can click on Repair Disk.
If it finds errors, repeat the process until it reports no errors.
After these repairs, quit the application, and restart normally.
3. If it still will not start up normally, restart with the Install DVD and do an *Archive and Install* to preserve your existing files. If successful, these will be located in a folder called Previous System on your hard drive.
4. If Archive and Install is not possible, because you have insufficient Disk space to complete that operation, then you will need to connect your eMac to another Mac and and retrieve the important files via that means.
regards roam

Excel export problem using craxddrt

Hi,
I'm using craxddrt v.11.5 in our intranet application to export rpt.reports to different formats. My code works well with PDF and text exports, but when it comes to Excel after the .Export(false) method executes the browser window just goes into idle then the session finally expires. I never catch any error. I have tried several export options with no prevail.
I suspect the Excel export is missing some info to complete and it is trying to prompt me, but no visible prompt gets displayed/answered so it just expires.
Could anyone help me out. I've spent several days researching and fixing the code and ran out of ideas.
Sincerely
Steve Komaromi

Hi Steve, Is there some reason you are posting this question over and over again?
Try looking at your same post: Excel export problem using craxddrt
Also, RDC is legacy product. Look for you answer where you posted the exact same question in the legacy forum.

EXPORT Problem. when i choose USER mode, it is exporting full database

Similar Messages

Maybe you are looking for