Export project in MOV H264 AC3

Hi ... one question ... is possible export one project video in a file MOV h264 but with AC3 at 6 channel and not AAC at 6 channel? because home theater not support AAC but only AC3

Whith AnyVideo Converter:
With Final Cut Pro X:
Codec: H.264, AAC, Timecode
I want export by FC Pro X one project in AC3 audio ... but the software will not let me choose the audio format ... only Quicktime AAC.
By compressor i can export AC3 but the software make me 2 file: one video file without audio ... and one Audio File AC3.

Similar Messages

Exporting AVCHD to mp4 from final cut for uploading to youtube (apple prores, .MOV, h264, x264, handbrake)

Hello everybody,
I Edit 1920x1080 AVCHD in Final Cut 7. Working with apple prores to export video to mp4 and then upload it to youtube. The goal is obviously the least quality loss in the process and to get a file as light as possible. Which of these three options is correct?
1. Export to mp4 from Final Cut (using quicktime conversion): h264 codec and bitrate 8000 kbps.
2. Export to .MOV from Final Cut (using quicktime conversion): h264 codec. Then, use handbrake (mp4 / x264 ).
3. Export apple prores sequence to. MOV from Final Cut (using quicktime movie). Then, use handbrake program (mp4 / X264 codec)
thanks a lot!

One friend told me dont choose none of the three options...
Told me about exporting a reference movie from timeline and then take the reference file into compressor.
I finally took the reference file and took him to compressor. I installed x264 and got one .mov very heavy, so I had to use the handbrake to get less weight and get mp4.
I did the same operation in streamclip and got a mp4 file (x264) with same size than .mov (compressor). So in both cases, if I want the less size I have to go on 2 steps (first compressor or streamclip and then handbrake ..)
any more suggestions? :-)

Poor quality when exporting to MOV (H264/AAC) with CS5 and CS5.5

Hi there,
I need to export my HDV sequence (1440*1080 Pixel 1,33 25fps) using HDV footage only to MOV format (with H264 / AAC codecs).
I'm using 1024*576 (1.0) SD preset with a correct video bitrate CBR 6mbs and the Quality is awful.
When I use the H264 format ( to get a .MP4 file) with the same preset (1024*576 square pixel >> CBR 6mbs) the quality is quite good. I 'm pretty happy with that. The only thing is that my client (TV) needs the clip in MOV format (including H264/AAC codecs) and the quality is awful. They expect me to use FCP as most of the journalists here in France use this application.
I tried with PREMIERE CS5 on a PC (windows 7 64 bits) >> 8G0 RAM, Dual Core
and with PREMIERE PRO CS5.5 on a mac
Same awful result when trying to export to MOV (H264/AAC).
I heard that PREMIERE can't properly export to this format? Is this correct? If so, i need to convince my client to use only MP4 (H264/AAC) files since I don't really wanna use Final Cut Pro or Media Composer to edit and export my clip.
Any tips ?
Thanks guys.
Julien

I had similar quality issues exporting H264 from PPro vs. Avid Media Composer. CHeck out this thread link http://forums.adobe.com/thread/854379?tstart=0.
I found it pretty helpful, it also links to another reference thread.
I think it's possible, but will take a bit of trial and error.
Good luck
Lindsay

How to export a project in.mov file

Hi,
In I movie, it is possible to finalize a project in .mov file for instance; What about doing so in FCPX in order to get my file from within a DVD burn soft ?

Ok Tom, thanks for helping, will this do for TV screen watching ?

What is the reason for this error? after export part of movie broken

hi, i cannot find the reason for this strange error that happaned to me for the first time, you can see the outcome here:
http://picasaweb.google.com/p.cardash/IMovieBug/photo#5164317113276584274
after exporting in imovie to h264 .mov file, from HDV project, resolution is twisted, plus, the part that was supposed to fit hole screen, is black and sometimes with little graphic errors.
i tried about 10 times, with different setting, resolutions, and other parameteres.
after exporting for ipod, everything is ok, in m4v format.
what is wrong? i use the same method for creating and also for exporting, as in previous projects. i didnt use any new transitions, efects nor titles...
any thoughts?
best to You,
Piotr

ok, i think that i know where is the problem, but i still dont what is it
ive copied my file to a new mac with just installed imovie and everything is the same,exactly the same output. so 100% positively the problem is within the particular project.
i didnt check my mackbook with TT, since i dont have it and dont want to pay i thought its for free
i`ll try later to figure out what wrong and what part of the project is bad.
for now, i think i hate imovie again :)) piece of..
let me know how your case ended.

Help me! Audition always failing exports to wav, mov, and Premiere Pro! WHY???

Hello,
I am sound editing and mixing a picture locked 25 min short film. When done with the mix and ready to export the mixdown, the export always takes forever (the project is 12GB large total) I mixdown to stereo file wav, but when I open the file, both VLC and Media Player don't play, with WMP saying its corrupt. I bring the same file into Premiere, and it says that it cannot import "because of a header problem"! What is that? I tried the same with the export to Quicktime (mov) format, and I got the same result. Go up to the window and choose Export to Premiere (you know, directly into Premeire) and it says it it will take 12 hours. I don't remeber cs5.5 taking this long. HELP PLEASE, I need to export this by tonight!!!
Export settings(both formats):
Convvert to 48 khz
Convert to 24 bt (32 with mov; only option)
tried both RF64 and Legacy Chunk whatever
Premeire Pro freindly setting on in Preferences
Windows 7 64 Pro
INtel Core i7 930
16GB RAM
GeForce GTS 250

I don't think a file of that length should exceed 4GB, but be aware that Audition CAN export wave files larger than that due to the RF64 support (vs. 'legacy chunk'), and Premiere can't yet open RF64 giga-wave-files!
Now, other than telling you that this shouldn't be happening, we'll need more information before we can track down what's wrong. Best thing is to detail for us what your export settings are, precisely.

Exporting projects that reference images in other projects

Hello, all. I'm wondering if anyone out there has had luck exporting projects that reference images in another project. I've just given this a try, and I get empty images (dotted gray outlines that can't be multi-selected and can't be "managed" as referenced files, even though it knows where the original file should be).
Here's how I have things set up:
1. main project with referenced images
2. secondary project with an album that references images in the main project (secondary project shows 0 images, but album in secondary project shows N images)
I export the secondary project, and import it into another Aperture instance. All images show up as dotted outlines.
Furthermore, if I go into list view, the Activity Monitor does something bizarre. It shows the # thumbnails remaining as a moving target. See the video below for an example.
Any help would be greatly appreciated. Thank you!
Screen captures:
Missing images as dotted outlines:
http://echeng.com/temp/aperture-missing-images.png
Small video of thumbnail creating bug:
http://echeng.com/temp/aperture-thumbnail-bug.mov

I do this sort of thing constantly and things a whole lot more complicated. It works fine on all three of my laptops and my macpro. I actually just tried to simulate the exact conditions you describe and I will tell you what happened.
1)Create new empty project in library A called "export"
2)Create new empty album in that project.
3)Dragged multiple images from different projects (all referenced) into that new album.
4)Used file->export project with the consolidate images checked. Imported that project into a new/different library.
All of the images showed up and they all showed up as managed masters as expected. So I then relocated the masters from that project and did the same thing in reverse, back to the old library. I ended up with another project called "export (1)" with all of the images referenced and having nothing to do with the original project or the original referenced masters - as expected.
I did the testing not to figure it out but to validate that nothing had changed or broken since the last update.
You are either not doing what you think you are doing or your library/library is forked - you may want to try a rebuild or just create a brand new set of libraries and try to validate that it will work with a brand new set of libraries to try to isolate the issue to 1 - your existing libraries or 2 - your installation.
RB

Exporting Audio to Movie, doesn;t export the audio

When I try Option>Movie>Export Audio to movie It rendereds but doesn't actully put the music into the video. Worked in 7.1 doesn;t work in 7.2.1 any plans on fixing this?

Indeed, thats what I do, but the time saving and
simiplicity of the 'Export audio to movie..."
function puts it at the top of the 'features that
really should work' for us composers to picture!
Hopefully it will be fixed soon with an update.
It's not broken. To be sure I went and tried it myself
and it worked fine. I did not even have to set the
locators, which I thought I would have to. I just dropped
the movie on a project and went to the menu. It did bring
up some dialog box I had not seen before. Something about
adding the tracks to use. It only showed track 1 but since I
could not figure out how to add the tracks I just hit OK and
it rendered all of them. Hope you get yours back up.

Exporting projects with referenced images

I want to import referenced images from an external hard drive, edit them and then export the project in order to archive it. Is this something that I can do now? Will I end up with a bunch of referenced previews in my library and an exported project that can link back up to the master images that are on a separate hard drive?
Antonio

No, this only exports a "copy" of your projects and does not remove the master image. It is still in the Aperture Library. I am also trying to find an easy way to move the entire project outside of the library and still maintain a reference link to wherever I move the images to. Any thoughts?

Problem with Export Project as New Library

Getting some behavior from Aperture that I do not understand.
I am running Aperture 3.5.1 on OSX 10.9.1 on both a MacPro and a MacBookPro(Retina).
Both machines are believed to be completely up-to-date software-wise (no indication in App store that software updates are available. i don't know how else to look.).
I imported (Nikon D800) raw images from an SD card to MacBookPro Aperture Library (which contains few images), performed adjustments (and "shared" some with my SmugMug account).
Then I selected the Project that contained my images, chose File, Export, Project as New Library (in order to move the adjusted images to my MacPro, where my "real" Aperture Library resides). (first time i have attempted such a workflow). I selected all 3 options (Copy originals . . ., Copy previews . . ., Show alert) and clicked Export Library.
I copied the resulting file to my MacPro. After choosing File, Import, Library (in Aperture on the MacPro), I see it "Merging", and then the project in question appears in the Library on the MacPro.
The problem is that each image has a message at the top of the Adjustments pane: "This photo was adjusted using an earlier version of Apple's RAW processing", and they all come into the receiving library with no adjustments, and no previews - not even the built-in preview that a raw file should carry (the images show in the viewer as _really_ flat, gray - very strange, i have never seen this appearance before, though I routeinely use raw format).
Trying to troubleshoot, I went back to the MacBookPro and closed Aperture, then double-clicked the Library on the desktop that had resulted from the export process (containing only one project).
Same situation. All of the images think they were processed on older raw processor (even though this library is being opened on the same computer that did the processing).
Any ideas? Is this a bug, or have I misunderstood the point of exporting Projects?

There have been two problems, reported, when exporting projects as library:
In earlier versions of Aperture the exported library did not include all images, if images had been imported from Photo Stream. I cannot reproduce this bug any longer with Aperture 3.5.1.
The export could go wrong, if the aperture library needed repairing.
Have you tried the Aperture Library First Aid Tools,to fix a possible library curruption?
See this link: Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Before trying to rebuild, make sure, your backup of your Aperture library is current and in a working condition.
I see a progress bar and the .exporting library is created in the desired location.
Finally I decided to watch a project closely as it was being exported as a library and I noticed that the file size jumps up an down. I'm not an expert on how export works, but it would appear that each exported photo is overwriting the previous one.
What is the desired location? Are you exporting to your internal system drive or to an external drive? If external, how is the drive formatted? Such overwriting of files could be caused by incompatible filesystems creating conflicting pathnames. Make sure, the destination is a filesystem formatted MacOS X Extended (Journaled).
-- Léonie

Exporting Audio to Movie

It seems problematic to export music to movie if the film is not placed at bar 1.
Sometimes it works even by using extensively the Beat Mapping. Some other time the music is not synch to the movie.
The solution I found was to bounce the project and lock the result to the SMPTE, then to place the movie at bar 1. I think this is a problem I face only with LP9.
Am I alone with this?

what format of movie are you scoring to?
Depending ...
Try iMovieHD or Quick Time Pro (not Quick Time).

How to save iMovie project as .mov file?

That's my question!

Dr.E wrote:
How to save iMovie project as .mov file?
That's my question!
Share/Export with Quicktime
That's my answer, and Welcome, Dr.E to the  boards ...

Export 16:9 .move file with FCP

Hello,
Since May this year I cannot export my FCP 16:9 project to a 16:9 .mov file anymore. The last good one I exported was May 4th, 2009. When I open this QuickTime file with FCP it is widescreen. I exported the same project on May 27th. That .mov file is letterboxed when opening it with FCP.
I never used QuickTime Pro because this program could and can only display my videos letterboxed.
I tried several options to try to export the movie 16:9 (Current Settings, DV PAL 48 kHz Anamorphic).
Someone advised me to use the Cmd-J option in Quicktime, but before May 27th, the export was good and I could use it in iDVD. But since that date it is not possible anymore. When importing the movie directly in iDVD, it is 4:3 format. And after changed it to 1024 with Cmd-J in QuickTime it is halfwidescreen in iDVD (looks like 14:9 i.s.o. 16:9)
How can I get my old good working version of FCP back I had on May, 4th and earlier ?
Or how can I export to QuickTime movie that gives me a 16:9 video again as it was before May 27th ?
Thanks,
Hubert

Hello,
I tried a new 16:9 project. In this new project FCP the video is exported in 16:9 format.
So there must be somewhere a 16:9/4:3 option switch in my old 16:9 project.
Where can this option be set to 16:9 ?
Thanks,
Hubert

How can I export projects from PMDB1 database into existing PMDB2 database?

Does datapump handle this? I have been told my only option is XER format but I have thousands of projects to move from one database into another existing database.

Migrate.bat will migrate an entire database from one platform to another (eg: Oracle to MS SQL SRVR) but for selective projects you would need to move them via PPM Application export (XER/XML). Your other option as someone suggested is to upgrade the entire database schema to a newer version if that is the end goal, but it sounds more like you have two existing database schemas to consolidate.

How to export as a movie file

Hello- I am a teacher and make a dvd for my kids with all of their pictures and videos on it at the end of the year. As I was taught in the apple store, I made the video in imovie and then added the music in garageband. Today I started this project, and garageband no longer has "export movie" as a choice, only music choices. Is there any way to still export this as a movie file? I believe it was a quicktime .mov file. Any help would be appreciated.

Today I started this project, and garageband no longer has "export movie" as a choice,
Are you now using GarageBand 10.0?
Then import the movie,
Track menu > Show Movie Track
File menu > Movie > Open Movie
Mix the sound track song
Then use the "File" menu > Movie > Export Audio to Movie.
This will write the audio aa an audio track into the imported movie.
-- Léonie

Export project in MOV H264 AC3

Similar Messages

Maybe you are looking for