Export QuickTime file with new audio and maintain the file size and quality as the original.

I shot some footage for a client yesterday and ran into an issue. To make a long story short I have QuickTime mov files shot with my Panasonic GH4 that have a buzzing sound in the audio track. I have clean audio from a recorder that can be sync'd. Is there a way for me to do this for the client and deliver them as the same QuickTime file but with the clean audio and keep the file size close to the original and not have quality loss in the image?
If so I will probably put all of the spanned clips together from each interview and sync the audio before delivery. I am just not sure which codec will give the client the same quality footage compared to the originals and not have a massive difference in the overall file size. They did request that they be Quicktime MOV files though so that is a must.
I don't see this as an option in the codecs in the export settings in PP, but is there a way to export as ProRes or another MAC native codec that will save them from having to convert it on their end? I am on a PC with Adobe CS5.5 so I am not too familiar with MACs, but from what I understand they would need to convert the files if I sent them straight out of the camera.
I found some related search results for this but they pertained to "Best quality" for export. I am not sure how the varying options work but I don't want to create files that are considerably larger, just not less quality.
If anyone has experience with this it would be greatly appreciated.
Thanks,
Cole

Here's the workflow: I imported the video footage into iMovie '08 and did my edits. Then I exported it (share) to my desktop with compression set @ 740 X 480. Then I used QuickTime Pro to fix the audio track. The file plays perfectly with both audio tracks working. It's a QuickTime file (.mov).
I hope this jars any replies as to why the file when uploaded to my iWeb gallery drops the second audio track.
Hmm,
Jack

Similar Messages

Export quicktime trouble with splitted audio

Hi, I'm getting 4 movies of audio when "self contained" as a quicktime movie. It is a regualr NTSC 720x480 sequence. I put the "self contained" movie in my drive to share and nobody can read it Besides, I cannot burn DVDs anymore with those results. I really don't know what happened. Anyone getting something similar?
Thanks in advance for any comments.

I put the "self contained" movie in my drive to share and nobody can read it
Kevan has the answer to the file-splitting problem. But once you have that straightened out, the reason others may not be able to play it may be that they don't have FCP installed on their system. Right-click on the self-contained file and choose 'Get Info.' Change the 'Opens With' to QuickTime Player and add a .mov extension to the file name if it doesn't already have it.
-DH

Just upgraded an iMac with 4GB Memory and Intel Processor from 10.6.8 to Mavericks and Quicktime plays m4v files with stuttering audio

I just upgraded an iMac with 4GB Memory and 3.33 Ghz Intel Core Duo Processor from 10.6.8 to Mavericks. I now have Quicktime 10.3 which plays m4v files with stuttering audio. This is a nightmare as I use Quicktime a lot in my research. I have seen similar threads but so far only reporting the problem. For now I have installed Quicktime Player 10.7 (which appears in utilities, leaving Quicktime 10.3 in the main applications list) which plays the same videos with no problem, but it would be good to know if anyone has managed to find a workaround at all, or know if Apple have plans to do anything about it?

Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.

QT H.264 files with two audio tracks. Quicktime plays 2nd track first. ***?

I've been experimenting with H.264 (AVC) and my DVDs. Using Handbrake, I ripped a DVD to MP4 (H.264) and including the director's commentary as the second track.
When I play the MP4 with Quicktime Player, it plays the director's commentary instead of the main soundtrack. VLC, however, correctly plays the first track (main movie audio track) and it allows me to select the second track via a menu.
To get Quicktime to play the proper track, I have to open "Movie Properties" and manually uncheck the second track. This was never a problem with DivX/XviD encoded files with two audio tracks; Quicktime Player correctly played the first track.
Why does Quicktime ignore the first audio track in MP4s (but not AVIs) and is there a way to correct this?

I do have QT Pro.
H.264 files are usually saved in a MP4 container. That's what Handbrake, ffpegX, and D-Vision create, anyway.
The "Choose Language" option is greyed out (unavailable) when I open this H.264 MP4 in Quicktime. If I try to change the settings in "Movie Properties," it says that I must save it with the .MOV file suffix.
It makes no sense to me that Quicktime Player can correctly identify the main audio soundtrack in a XviD file with an AVI container but not in a H.264 video with a MP4 container which Apple has been touting as the latest, greatest thing. Even VLC, an open source product still in beta, gets it right.

All backup/sync files for Iphone lost on old PC, anyway to sync with new PC without losing music, photos, contacts and texts?

All backup/sync files for Iphone lost on old PC, anyway to sync with new PC without losing music, photos, contacts and texts?

Make sure your new computer is authorized in iTunes. Disable autosync in itunes, connect your iphone, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your device got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
Apps can be downloaded again for free, in the US music as well. Downloading past purchases from the App Store, iBookstore, and iTunes Store
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
See also How to back up your data and set up as a new device

I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio t

I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio tracks - specifically one stereo pair to be t1&t3, the other stereo pair to be t2&t4. This is the standard way requested by an international distributor of tv programmes. I understand how to set the sequence in FCP to output 4 audio tracks - either 2 stereo pairs (1&2, + 3&4), or 4 discrete tracks. But how do I then output this as a QT file?
The manual tells me that to export multiple audio tracks, File>Export>QT Movie has it's Config pop-up menu in the Audio Settings area of the General tab of the Sequence Settings. Well, that's set for 4 discrete channels, but the QT export settings only allow for 2 mono or 1 stereo output, and that's what I get when I try it. What it says in the manual just doesn't happen.
Exporting via Compressor, on the other hand, has an abundance of choices of 4-track outputs, none of which are labelled as anything resembling 'discrete'. Would any of those 4.0 settings suffice? Or am I likely to get myself into difficulties further down the line? As I am monitoring for this task on a 2-track audio system, I cannot confirm exactly what I am getting when I use any of those settings.
Any advice would be greatly appreciated!
John

Call me naive, but I've not heard of splitting the stereo pairs like this before.
What broadcaster? (perhaps one of our EU regulars will drop in...)
You can do all sorts of pairing but it is coincident tracks pairing- eg 1/2 + 3/4
Sorry I can't offer anything.
x

Can Premiere Pro CC handle AVI files with multiple audio streams?

I have an AVI file with two audio streams and I am wondering if there's any way to access the second stream in PP? So far I can only get the first stream to play. I know I can extract the second stream in for instance VirtualDub, but it would be nice to not have to do that in the interest of an effective workflow.

Hello again Jim! Thank you for your reply, you seem to be working hard here on the forums! The info I have found from 2011 suggested that it wasn't possible then, but I was hoping maybe they added this feature.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Loaded iPhoto 9.2, my 7200 photos grew to 113,000 files with screen shots, duplicates, ,5-10copies of faces and apple has no way to eliminate this. How can I ever retrieve the original 7200 from this mess?

Loaded iPhoto 9.2, my 7200 photos grew to 113,000 files with screen shots, duplicates, ,5-10copies of faces and apple has no way to eliminate this. How can I ever retrieve the original 7200 from this mess?

This can happen if the HD icon is inadvertently dragged to the iPhoto Window.
Easiest solution: restore from your back up.
Regards
TD

Getting the page size and knowing how many pages they are in PDF file

Hi There,
when i do this script (
var myPDFFile = File.openDialog(["Choose a PDF File"]); )
with JS via Windows it is used for opening a new PDF file when i import this file i need to
get the page size and how many pages they are in PDF file. but i dont know how to do it.
please help me.

Ask here: http://forums.adobe.com/community/indesign/indesign_scripting

The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?

The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type. Why does it reject some and accept others?

Hi there. I'm having the same problem: my iPad won't import some photos from a folder, saying that they can't be read. They are all JPEGS and some photos taken at the same time have synched fine, but out of a folder with 200 photos, it only lets me synch 37. I'm synching albums created via Photoshop Elements 6, which has worked fine until now.
I've tried deleting all photos and re-synching, and have also deleted the iPod Photo Cache, but it hasn't made a difference.
The iPad auto-updated to the latest version of iTunes, so maybe that's what's causing it?
Any advice gratefully received!

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with them?

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with the photo files?

What version of iPhoto and system are you running? On the guess that you're running the latest iPhoto, 9.4.2, Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the thumnails, Option #2.
2 - It may take 2-3 attempts so don't give up after only one attempt.
OT

On a MBP with Mavericks how do I get the Save As dialog box to open at the same size and place at which it was last closed and used to happen before Mavericks?

Before I upgraded my MBP to Mavericks, the Save As dialog box would reopen at the same size and position as it was when last closed. Now with Mavericks it always opens in the same position at a very small size. Is there a way to make it reopen at the last place and size at which it was closed?

I have resolved the issues presented without having to find and uninstall the Macromedia Flash Player 8.0 in order to get "Adobe Flash Player 10" playback of .swf files on my computer. When I begin this task, I expected to download an "Adobe Flash Player 10" as a player program download instead of the Internet Explorer and Firefox plugin that it appears to be.
This is what I did and what I believe I have:
1. I setup Internet Explorer 6 as my default browser and then used the following site to download Adobe Flash Player 10
http://www.adobe.com/products/flashplayer/
2. As I had done before (and also suggested in another thread here), I went to Tools/Manage Add Ons and found Shockwave Flash Object, highlighted it, and clicked on Update Active X. Next, what I did not do before, I restarted the computer immediately after that.
3. Next, I set Mozilla Firefox as my default browser and then used the above site to download Adobe Flash Player 10 again.
4. With Firefox, the critical step included Firefox Tools/Options/Content with File Types (Configure how Firefox handles certain types of files) and the Manage Tab there. SWF Shockware Flash Object/Change Action/and dotting "use this plugin" - Shockwave Flash, followed by a computer restart got the job done.
Now, if I want playback of a .swf file, I can
a. Open With Internet Explorer (assumed with the Adobe Flash 10 "plugin")
b. Open With Mozilla Firefox (assumed with the Adobe Flash 10 "plugin")
c. Open With Macromedia Flash Player 8.0
I am satisfied with those results for my use. Any additional comments on the player vs plugin aspect of the matter would be interesting and helpful.
ATR

I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Ac

I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

I place a psd file with transparent background on another layer in my InDesign document. The layer b

I placed a psd file with transparent background on another layer in my InDesign document. The layer below has a color (RGB). When the psd file is placed it changes the color on the layer below. I've tried other psd files thinking something is wrong with my file, but get the same result. I have tried for days to figure this out. Can anyone help me?

Wow, thank you! That was fast. I googled that question to death and even bought (another) book on CS5 and never saw that answer. Thank you so much. You made a very good ending to my day! I'd buy you a beer if I could!!

Export QuickTime file with new audio and maintain the file size and quality as the original.

Similar Messages

Maybe you are looking for