Export Quicktime from a DVC Pro HD 720p60 Project

I've read the discussions and am still looking for some solid answers on this and /or confirmation that I've done it correctly.
I'm working in a DVC Pro HD 720p60 project
Sequence setting frame size is 960x720
(no I don't know what it was shot on)
The cuts are :30 spots and I'm looking to do 2 things for my producer.
1) export the spots so that he can compress them as desired for his reel on his website, for which I've done the following:
File - Export - Quicktime Conversion - Settings, H.264, size 1920x1080
Is this the best way to do this?
2) export the spots so that he can add them to his reel when he wants to on dvd, for which I've done the following:
I created a new DV50 project and cut the spots into them.
File - Export - Quicktime Movie - Current Settings
I also tried:
File - Export - Quicktime Conversion - Settings, H.264
The strange thing was that the H.264 on this looked better than the quicktime movie.
Any thoughts? Much appreciated!

Well, if you need to get it to the web guy to compress as he sees fit, then you will need to provide him with...well, what he wants. You need to ask him (her) what they want you to give to them.
And the dimensions would be 1280x720. 960x720 is squeezed anamorphically. and going to 1920x1080 is makig it bigger than the original.
As for the H.264 for DVD. Compressing it like that, then compressing again for DVD...icky. It looks better? Well then, maybe it darkened or brightened the footage as it compressed it. You might consider color correcting your main footage if you like that look.
And you weren't in a DV or DVCPRO 50 project, you were in a DVCPRO HD project. Why cut it in a one of those settings? it won't look any better, in fact, it will look worse. And compressing it for DVD ro the web wouldn't be any easier. Sorry, I guess I don't understand your reasoning here.
DV 50 isn't what it was shot nor edited at. It is DVCPRO HD...DVCPRO 100. Export self contained using sequence settings and it is EXACTLY the same quality as the original footage in the timeline.
Shane

Similar Messages

  • Trouble exporting Quicktimes from Avid Express Pro?

    Hello! I'm operating Avid Express Pro version 4.3.0 on a G5 Mac OS 10.3.9 and I recently upgraded to QuickTime 7.1.5. I can no longer export quicktimes from Avid Express Pro because it is not compatible with this version of Quicktime. It's only compatible with QT 6.5.2. I've tried to use the reinstaller 6.5.2 and it doesn't work as it cannot seem to find 6.5.2 on my system. I now can't load 6.5.2 as I already have a higher version of quicktime on my system. I've tried deleting QuickTime files and starting from scratch and did delete a few items, but dragged the majority back into my computer from the trash as I realized I didn't know what I was doing and which 3rd party programs also utilized QuickTime.
    If I wish to reinstall QuickTime 6.5.2 but the reinstaller won't work, what would you recommend?
    HUGE thanks!
    Mac G5   Mac OS X (10.3.9)   Avid Express Pro 4.3.0

    Not sure that anyone in the iPod Nano forum can help you. You might try searching/posting in the Quicktime Forum
    http://discussions.apple.com/category.jspa?categoryID=122

  • TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

    when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
    i need to submit this movie for uni project tomorrow.
    any help/advice will help . thanks.

    According to Crash Analyzer
    -50 (QuickTime)
    This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
    good luck

  • I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    SSign in to the App Store using the Apple ID that was used to purchase the software.

  • Can't Export Video from Final Cut Pro

    After updated to OS Maverick, I can no longer export video from Final Cut Pro.
    It pops up "The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
    ANYONE CAN HELP??

    10.0.2, I think this is where the problem is.
    I will update to the latest (10.0.9) and update this thread to see if this will resolve my problem.

  • Exporting Subtitle from DVD Studio Pro

    Is there a way to export subtitles from DVD Studio Pro or Is there a tool somewhere that will generate an STL file from a DVD Studio Pro subtitle stream?
    Thanks for your help!

    Yes, other than the manual -- which I have exhausted. It gave me the coding for a text-based caption, and the coding for a graphic, but not the coding that would put both on the same clip (same time value).
    However, I can manually go into the subtitle inspector and add whatever element (the text or the graphic) each with its own offsets, and have them appear flawlessly together. I am convinced there must be coding that generates this effect I can use in the STL file, but I have found nothing on the web, nor any of several downloaded manuals (including pp. 456 - 460).
    Any advice?

  • How can i export music from a macbook pro to an iPad?

    how can i export music from a macbook pro to an iPad?

    iTunes: Syncing media content to iOS devices and iPod - http://support.apple.com/kb/HT1351 - detailed example: https://discussions.apple.com/message/18860187
    iOS: Syncing with iTunes - http://support.apple.com/kb/ht1386

  • How to export MPEG2 from DVD Studio Pro with subtitles?

    Does anyone know how to export MPEG2 from DVD Studio Pro with subtitles?

    You cant do that...
    We might be able to help you more if you are trying to do something specific,
    -Jake

  • Exporting quicktimes from FCP to iDVD?

    I am having trouble exporting quicktimes from FCP and bringing them into iDVD.
    How do you make Chapter Markers on an export from FCP?

    When creating chapter markers, make sure nothing is slected within your timeline (click in a blank space before hitting m). Hit m again and click chapter marker button.
    When exporting your sequence, be sure to select Markers > Chapter Markers on the export dialog popup.

  • Exporting Quicktimes from Premiere Pro

    When exporting video from Premiere pro, uncompressed or HD 1080i Quicktime settings crash my machine every time , any idea why? I'm trying to find the best export to give to a colleague working remotely on a mac using aftereffects

    <moved from Adobe Creative Cloud to Premiere Pro>

  • How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

    Hi
    I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
    Here are the settings:
    HD:
    1 Video CODEC                 XDCAMHD50
    2 Wrapper format           QuickTime Self-Contained
    3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
    4 GOP                                   Long GOP
                                                 Closed GOP
    5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
    6 Movie version               UK Home Video Version
    7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
    1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                              1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
    2 Resolution                      1280 x 720
                                               1920 x 1080
    3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
    4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
    5 Chroma format              4:2:2
    1 HD audio format           24 bits/sample 48 kHz sampling rate
    2 Track layout                    Track 1 – 2.0 Stereo L mono
                                                Track 2 – 2.0 Stereo R mono
                                                Track 3 – L
                                                Track 4 – R
                                                Track 5 – C
                                                Track 6 - Low frequency effects LFE
                                                Track 7 – L Surround
                                                Track 8 – R Surround

    First of all, what are your sequence settings?  Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this).  Do you have a surround sound mix?  
    You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs. 
    Do you understand about safe zones for graphics?  If not, post back.
    I don't see any option to set the GOP in xdcam in compressor.  This may be built in to the xdcam format.
    I don't see any option for 720 xdcam hd in compressor. 
    There are many other tools available for this kind of work, but they may be out of your price range.  You might want to just find a facility with experience in deliverying this sort of thing.

  • Exporting sequence from Final Cut Pro 7, some clips are pixellated and bad quality, does this have anything to do with the fact that I changed those clips speed?

    Hello,
    Bit of a beginner using Final Cut Pro 7
    Am currently trying to export a sequence using quicktime conversion.  Sequence has various filters and effects over it and when I export it some of the clips are pixellated and appear to have not exported correctly.  From what I can gather the affected clips have either been slowed down or made faster.  I am wondering whether this is the reason they have not exported correctly
    Any help would be appreciated
    Cheers

    More information needed.
    Codec of material?
    Sequence settings? (codec)
    fwiw - do not use quicktime conversion. Use Export Quicktime with Current Settings enabled then do any format conversions in Compressor.
    x

  • Export jpgs from final cut pro x

    How do I now export jpgs from my final cut pro x? 
    They seemed to have changed it in the new version.

    From the Share popup select Add Destinations. You see it in the Destinations preferences.

  • Export markers from Final Cut Pro X to DVD Studio Pro

    Hello,
    After finding out how to create chapters via markers in Final Cut Pro we wonder how to export these markers to DVD Studio Pro without having to create ourselves a .txt file and writing the names and the times of the markers in it to export it to DVD Studio Pro. Isn't there a way to make this happen automatically?
    Unfortunately the new version of Final Cut Pro doesn't have an export to Quick Time Player and this is why this kind of solution falls out and we really need to create the markers first in Final Cut Pro and not directly in DVD Studio.
    Is there a solution?
    Thank you.

    At present, you cannot add chapter markers in FCP X.
    If you send the project to Compressor, you can add chapter markers there, or you can add them in DVD SP.
    You can add the chapter markers in Compressor or DVD SP manually, or if you create a text file listing the exact timecode positions (from FCP X storyline) where you want the chapter markers to be (each on a new line) Compressor (or DVD SP) will automatically insert the markers when you point it to the text file.
    Andy

  • HT5148 export video from final cut pro x

    how can i export / share video from Final cut pro x (10.0.7)?  i have try different type and even use compressor, but did not see any final product.
    thanks

    I went into File and then share and then choose the format that i want (master file - default) then i choose a second hard drive in my computer.  and nothing happens at all

Maybe you are looking for

  • Importing .ai files to AE

    I am trying to create a shape layer out of a vector layer.  When I import my .ai file to AE cs6, add it to a compisition, right click selecting create shape from vector layer I get a grey box.  I am assuming this is a transparency issue in Illustrato

  • How to update Activity of Customer/Contact

    Hi All.. I am Abap Consultant and i need develop a report to Update Activity for customer/contact using bapi FM. can you please tell me what is Activity of customer ? is it similar like Partner Functions?? where we menstioned this PF for a perticular

  • PDF attachment in mail adapter

    Hi I am reading mailbox using mail adapter. But i cannot read the PDF attachment in that mail. I use "PayloadSwapBean" in the module, but it is packing the mailbody to the text file, but they is no sign of PDF attachment. How to read the attachment.

  • ITunes Library cannot be read because it was created by a newer version of iTunes. I have a G4 Mac on OS 10.5.8. Help?

    I have the message "iTunes Library cannot be read because it was created in a newer version of iTunes. I have an old G4 Mac and cannot upgrade beyond Leopard. (OS 10.5.8) What can I do? How and where is help?

  • Backup from 3GS to iphone4 failed!!!

    Before I went to get my new iPhone 4 today I backed up my 3GS twice to besure it backed up before I traded it in. I updated the software and ITunes before I backed it up. Went and got my new iPhone 4 got back to the house to restore it from my backup