Export recorded slideshow, with embedded quicktime, to quicktime...

...doesn't capture the video.
I'm trying to export a Keynote '09 presentation, with recorded audio. The presentation also contains embedded quicktime video (a screencast). However, the resulting exported quicktime does not run through the embedded video (the initial video still is shown throughout the whole narration of the screencast). I'm using the "recorded timing" playback.
While its exporting, the Keynote preview actually shows screencast playing fine.
The embedded video plays fine when I export without the recorded audio.
Any idea what might be happening here?

Well i just found this and tried it, it worked
1) Go to export to QT as usual.
2) Click the second drop down (Formats) and select 'Custom...'.
3) A new window will pop up, click the 'Settings...' button.
My 'Compression Type' drop down was set to 'H.264'....I was told to
4) Change the 'Compression Type' to 'MPEG-4 Video.
(I do not think it is related to the fix being suggested or just as a preference, I was told to slide the Compressor - Quality slider on the bottom left to 'Best')
5) Click the 'OK' button on the bottom left
That window will close.
6) Click the 'Next' button and continue with your export.
Not sure why this works but it did. But i still cant do it the normal way.

Similar Messages

Export H264 pass-through movie with embedded text track QuickTime Pro 7 Windows?

Using QuickTime Pro 7 for Windows, I add a text track with closed captions to my H264 .mp4 videos.
The text track works great until I try to export it. After I've added the text track, the text track is displayed as long as the track is selected to be active using the Movie Inspector track GUI.
My movies are encoded as H264 for cross-platform compatibility, and need to remain in this format. The only way to save them in QuickTimePro 7 for Windows is to Export Movie to MPEG-4. I select Pass-Through mode to retain the resolution and bandwidth parameters that I initially encoded the video with.
Unfortunately, after I export to MPEG-4, the caption track is lost. It disappears. When I open the newly exported MPEG-4 caption file, and select Movie Inspector, the caption track is missing. Inspector only shows video and audio tracks.
If QuickTime Pro 7 for Windows correctly exported my text track with the video and audio tracks, then users would be able to view the closed captions upon playback in QuickTime Player by selecting View--> Show Closed Captioning (Ctrl+Alt+T).
Anyone been able to export to MPEG-4 pass-through movie with embedded text track QuickTime Pro 7 Windows?
Thank you!

Sorry here is the code
<body>
div id="myAlternativeContent"
a href="videofolder/video.mov"
img src="videofolder/video-poster.jpg"
/a
/div
</body>
videofolder/video
Message was edited by: SFlocation
Message was edited by: SFlocation

I am using Lightroom on my MAC where I import the finalized JPEG-pictures into iPhoto to create a slideshow (for instance in combination with films). When exporting the slideshow with a 1080p resolution to iTunes I experience difficulties (missing slides

I am using Lightroom on my MAC where I import the finalized JPEG-pictures into iPhoto to create a slideshow (for instance in combination with films). When exporting the slideshow with a 1080p resolution to iTunes I experience difficulties (missing slides and black transitions). When using JPEG-pictures directly from the camera there are no problems, so the manipulation in Lightroom seem to cause corrupt files. Does anyone recognize tje problem and could it have anything to do with the introduction of the Yosemite software? Is Lightroom already Yosemite-proof?

In iPhoto 11 the Originals folder is renamed Masters.
IPhoto menu -> Provide iPhoto Feedback and report the bug.
Regards
TD

Problem with embedded captions in quicktime export

Hi,
I'm trying to add embedded closed captions to a video. I just installed the latest version of Premiere Pro yesterday on my Mac. Should be simple, but alas!
I have this 3 minute video file: https://www.dropbox.com/s/5t9s1kgpa8s3f76/Revver%20Introduction-1080p.mp4
To which I added this .scc caption file: https://www.dropbox.com/s/2ickt0al7v6ggb2/rev3.scc
Things look great in the Premiere preview pane: http://screencast.com/t/HFZLVj6OX
But when I export as a quicktime video with embedded captions, I get a garbage output: https://www.dropbox.com/s/j3bmcx9yk5uuhy0/Revver%20Introduction-1080p-CC.mov
The closed captions display way more rapidly than they do in the Premiere preview pane. I didn't mess with any of the export settings - here's what I selected to get the export: http://screencast.com/t/dgx8a4v5sl7
What's going on? Why is this not working?
Rory

Wow that's awesome. Thanks Kevin.
I downloaded your project, located the source files as being on my machine instead of yours, and tried it out. Unfortunately the export still had some issues, but looking at what you did helped me figure out how to start again from scratch and do it correctly.
I think I understand now - I had been creating a sequence by dragging the video onto the new item. So the sequence used the attributes of the video clip. I hadn't realized I could create a new sequence with different attributes, as described in this article http://helpx.adobe.com/en/premiere-pro/using/creating-changing-sequences.html
So I created a new sequence, made sure it had 29.97 fps and correct dimensions (1440 x 1080), dragged in the video and scc, and exported.
Seems like it worked!
Here's the final verions, with captions embedded. You'll need to download it to see the captions, since dropbox's player doesn't support caption playback:
https://www.dropbox.com/s/j3bmcx9yk5uuhy0/Revver%20Introduction-1080p-CC.mov

Export to MOV with embedded Movies -- sound erratic

Help! I've trying to do too much with Keynote, I'm sure: I need to make a multi-media presentation with bg music, VO narration, standard Keynote transitions AND embedded movie clips -- then exported as a MOV file. When I do export it, and play the MOV file in QT, the embedded movie will play nicely, but only the first second or two of it's embedded audio will play.....can't figure this out. Anyone recognize this fail?
Ultimately, I'm wanting to bring the file up into iDVD and make a dvd presentention for distribution; will it matter that this happens in the MOV file?

Hi all.
I do exactly have the same problem since Keynote 4.0 and was hoping that it's solved in Keynote 5.0.
As soon as I try to export a previously recorded slideshow, (that has a quicktime-movie embeded on one slide) and one or two little textanimations on it. The embeded movie stops playing when the first animation starts in the exported quicktimemovie. When I view my recorded presentation, everything looks fine.
I do also believe, that the Quicktime-Export-Function does not work correctly because of timeline differences or so.
I would really appreciate a fix, specially becaused I upgraded in the hope that this should have been solved since around 10 months now....
Too bad.
P.S. As a workaround I am currently using also screenflow to record a recorded keynotepresentation to finally receive a movie. But that is kind of awkward too....
Message was edited by: Joerg Klaas

Exporting SpeedGrade Project with Embedded Alpha Channel

Hello! I am currently writing with a problem I can't seem to find a solution for in SpeedGrade. My problem is that I imported footage with embedded alpha channel enabling me to chroma-key out a green screen. I would like to export this file now with the alpha channel still embeded to be delivered to Premiere. Is this possible?
Your help is greatly appreciated!
Philip

Thanks Fran,
I'm using uncopressed QT, animation.
I did the color correction on a grading track and I think that's what killed the alpha, because when I selected the track with the footage the alpha was being read properly. So what I did instead is I saved a .look file and imported it in After Effects, I rendered from there.
Can you have the grading track read the alpha from the original footage or if not can you copy the attributes from one track to another, as if I was moving all the grading from the grading track to the footage tiself instead of having to do it again from scratch?
Thanks again,
David.

Export as PDF with embedded profiles for Grayscale images

Does InDesign CS6 export pages with Grayscale images as PDF with embedded profiles?
Possible profiles, for instance:
– Gamma 2.2
– Dot gain 20%
– Black Ink ISO Coated v2 (ECI)
Export mode:
– Acrobat 5 or higher
– No color conversion
– Embed all profiles
Test by Acrobat Pro
Advanced > Print production > Preflight > PDF analysis > List objects using ICC/Lab/Calibrated Color
[The question is not about the export of Color images as Grayscales]
Best regards --Gernot Hoffmann

I wouldn't ever use different RGB profiles and different CMYK profiles and
different Gray profiles in one doc – it's just necessary for tests.
If you had a hypothetical case where your InDesign document's assigned CMYK profile and intended output was ISOcoated_v2_300_eci and you recieved grayscales for placement with different gray profiles assigned, I think you would have to make the conversion in Photoshop if you want the grayscales to be converted to your ISOcoated_v2_300_eci output intent space.
So in this case I have a grayscale image with Dot Gain 10% assigned and you can see the 50% patch is reading as 50% in Info panel:
If set my Working Gray space to the ISO Coated profile as above and do a Convert to Profile with the Destination set to Working Gray:
The preview doesn't change but I get converted gray values—50% is now 44%:
If I place the grayscale in an InDesign doc with ISOcoated_v2_300_eci assigned as the CMYK profile, the preview won't change (you have to turn on Overprint /Sep Preview), and the converted numbers will show in Separation Preview. The preview and numbers will also be unchanged in Acrobat if you export to default PDF/X-4

Exporting a Slideshow with Titles

Hi, Does anyone know if it is possible to export a slideshow from iMovie including the picture titles, but with the titles appearing as Subtitles on the DVD so that you could turn them on or off?? Seems like a simple thing but i have a feeling it can't be done.
As ever any suggestions gratefully received.
Powerbook G4 1.5Ghz, 1Gb Ram, Superdrive Mac OS X (10.4.5)

I've never heard of that working; but I don't use iMovie for slideshows.
DVD Studio Pro allows you to add subtitles. Kind of expensive these days since it bacame part of Final Cut Studio...
http://www.apple.com/finalcutstudio/dvdstudiopro/

Export to Flash with embedded QT or Flash video - can it work?

Is it possible to have an embedded video (either QT or Flash) in a Keynote '08 presentation and export the presentation as a Flash SWF file? I have tried saving the video in different QT and Flash formats then export to Flash using Keynote, but when I view the exported SWF file, the embedded video doesn't play. I'm unsure if it's not possible to do this or if I'm doing something wrong.
Thanks.
Lori

No, this would have required Apple to build a Flash video encoder engine into Keynote's export module. You'd think if it was already a flash movie, it would work, but it doesn't, so assume they just didn't bother building in support for embedding flash movies into a flash export.

Every time I export a slideshow with photos,music and movies to i tunes it quits, after waiting 3 or 4 hours it just quits

Question. I am unable to export a slideshow of photos, music and movies to i tunes. I wait hours watching the blue bar and it quits every time. Has anybody got a simple answer to this problem.

SystemPreferences -> Energy Saver
Set the Mac to never sleeep.
Regards
TD

Recording Slideshow with Existing Narration...

Greetings Support Discussion Members,
Is there any way to record a slideshow using an existing narration? What I want is to use a narrative recorded at a studio, sync to slides with variable times [not fixed timing] and have this playback in sync with audio and slides playing back timings with the mouse or direction arrow? And export this to Quicktime. Read completely through the manual and there is no clear way to do this. Anyway you can instruct on how to accomplish or workaround would be appreciated. Thanks! DD

Tulse,
Thank you for your suggestion. It works! I found that you have to be careful in setting up Soundflower precisely. Or else it won't work. Very interesting indeed! I tried it with one slide to see if I can get the audio in there. It really works! I'm quite surprised that Keynote does not allow you to do this easily? Hopefully this will be included in an update or subsequent version. Because you're using TWO applications now, you need to give yourself time switching between the two. You could put a tone, click or short space with a beep/audio ID to tell you when to start recording in Keynote. The Apple Discussions community is awesome! Thank you all for sharing and caring! Best wishes for all in 2009. Donnie D.

Exporting Crystal Reports with embedded Xcelsius content to PDF

Hi,
I have a crystal report with an embedded xcelsius chart. I would like to schedule this report using Crystal Server 2008, sending it monthly as a PDF file attached to an email. But after exporting the report through Crystal Server, the xceslsius content is just blank. Shouldn't this be working?

What is the version of Adobe Reader? Adobe Reader 9 should be there.Also check whether you have Flash Palyer/ flash Active X control installed.
If you can view the dashboard after exporting it to PPT,it means you have Flash Player installed. You need to try with Adobe Reader 9.

How do I export a slideshow with music from iphoto to facebook?

I have a Bloggie camer/video recorder and I took some pictures and video of an outing I had with some friends. I'd like to share the iphoto slideshow on facebook with my friends in the slideshow format that includes the default music of choice. Any suggestions? I am using a macbook pro.

I have the same question!!

Which program would export a swf with embedded mp3?

And not export with it in a Resource folder, as i need to upload one file with music embedded within?
I am currently exporting from INDD but the interactive mp3 is exported in a seperate resource folder, and I wish to upload the SWF to a website home page as a single file, thanks!

Hello James,
a swf-file with a mp3 in it? I'm not sure to understand you in the right way.
I for my part made a Dreamweaver testwebsite which I called "INSERT Test with different types of media". You could have a look there to see whether it satisfies your expectations: Forum Video
Hans-Günter

WAD: Problems when exporting to PDF with embedded .swf

I'm using Web Application Designer (WAD) 7 and have created a template with an "Export to PDF" button and an embedded .swf flash file which is an Xcelsius dashboard.
What i'm trying to do is show the information I want on my dashboard and then export that to a PDF to email out to multiple users who would be interested in the data each month. If exporting to PDF isn't the best route to get a snapshot of this dashboard out to other users and there's an easier way please let me know, but here are the issues i'm having:
1) When I have the dashboard showing the information I want and click the "Export to PDF" button, the dashboard reloads as the PDF settings window pops up and gets reset back to it's initial state.
2) If I ignore problem #1 and click on 'OK' in the Export dialog anyway after selecting PDF settings, my Adobe Reader pops up but then shows a message saying "The file cannot be opened because it has no pages". Basically it doesn't see the .swf as being a component to take a snapshot of and print on a PDF. I did try adding a text component just so there was something on the template and I then get a PDF with that text component showing and no .swf snapshot.
Has anyone come up with a workaround for this? I've tried using the BEx Broadcaster with the 'Send' option but get the same results in regards to the blank page.
Thanks as always for the help!

Thanks for the reply.
The dashboard is connected to a query in NetWeaver BI to get its data. So the request of the user is to be able to adjust the dashboard to show the information they need (well say of a certain region) and then take a snapshot of that and email it out to co-workers in Group A. Then the user will adjust the dashboard to show other data (for a different region we'll say) and take a snapshot to email out to co-workers in Group B. etc and etc.
I have looked into installing a PDFCreator print driver but that wouldn't be feasible to get it on all machines in the business. I've also looked into getting it as a .jpeg which would suffice, but am unsure if there is a way to do it with script and connect that to the dashboard when a button is pushed (will look into this). This seems like a topic for over in the Xcelsius forum now.
I used the following code within the <body></body> tags of the WAD's xhtml to embed the .swf:
<object id="dashboard" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,40,0" height="600" width="800" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" >
<param name="Movie" value="bwmimerep:///sap/bw/mime/Customer/JavaScript/dashboard.swf" />
<embed src="bwmimerep:///sap/bw/mime/Customer/JavaScript/dashboard.swf" name="dashboard" type="application/x-shockwave-flash" />
</object>

Export recorded slideshow, with embedded quicktime, to quicktime...

Similar Messages

Maybe you are looking for