Export / Render error - "Not found"

Hello all,
A new, frustrating problem came up today. I opened an old FCP project and tried to Export the Timeline (Export > QuickTime Movie). About halfway through exporting, the progress bar disappeared, and an error dialogue popped up. All it said was, "Not found." No specifics about what was "not found," though.
I tried to re-Render the whole timeline (it was fully rendered upon opening the Project) and again got the "Not found" error, halfway through rendering.
I checked the Timeline and the Browser for offline files, but everything that is used in my Timeline appears to be online. I tried to Export the movie both as a Self-Contained File, and not, with the same results.
I even quit FCP and restarted the computer, to no avail.
Can anyone offer advice on what else I should try?
Thank you for your help!
Dual 2 GHz Power PC G5 Mac OS X (10.4.6) 1 GB DDR2 SDRAM

Try FCP rescue. It is a free download. Also update software, rebuild permissions with disk utility, run MacJanitor (also a free download), Reset PRAM. Ensure you have enough free space on the volume you are rendering to.
Can you play the sequence through without any drpooed frames or errors? These might give you a clue a sto where the problem is in your time line. Rarely video files get corrupted and need to be recaptured.
Can you print to video? Errors here can also give you clues to problems.
Hope this helps.
Dave F

Similar Messages

"Client error not found" = DOOOOOOOOMMMMMM!!!!!!!

Ok been getting this a lot recently and I think it is to do with my printer setup script. There must be a way to fix it, but for the life of me I can not find the solution.
It usually starts with all printers on the system being paused. You can unpause them, but as soon as you try print they automatically pause again.
You can reset the print system, but when you try readd a printer you get the message of doom "client-error-not-found".
From then on I can not add any printer to the system and the only fix is a wipe and reinstall.
I mentioned above that I use a printer script to install the 10+ printers in the office onto the 80+ machines. All the machines are running 10.5 and upto date.
I have put the script to have a look at, but even if it is causing the problem there should be a way to fix the issue.
#Reset print system.
do shell script "lpstat -p | cut -d' ' -f2 | xargs -I{} lpadmin -x {}" with administrator privileges
#log onto the server and mounts the IT_support folder. If the IT_support folder is already mounted it will skip the mount and move on.
if {"IT_support"} is not in paragraphs of (do shell script "/bin/ls /Volumes") then
mount volume "afp://192.168.1.251/IT_support"
end if
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/drivers/* /Library/printers/PPDs/Contents/Resources/" with administrator privileges
#Add the printers to the system.
#Colour Printers.
#Colour_Printroom Appletalk.
do shell script "lpadmin -p Colour_PrintRoom -L FirstFloorPrintRoom -E -v pap://*/Colour_PrintRoom/LaserWriter -P /Library/printers/PPDs/Contents/Resources/xrx7655.ppd -o printer-is-shared=false" with administrator privileges
#Colour_Kitchen Appletalk.
do shell script "lpadmin -p Colour_Kitchen -L First\\ Floor\\ Kitchen -E -v pap://*/DC3535_DC3535Print/LaserWriter -P /Library/printers/PPDs/Contents/Resources/Xerox\\ DocuColor3535\\ PS -o printer-is-shared=false" with administrator privileges
#BizHub Appletalk.
do shell script "lpadmin -p Colour_BizHub -L Colour_BizHub -E -vpap://*/X3eBizhub45035C-KMPrint/LaserWriter -P /Library/printers/PPDs/Contents/Resources/en.lproj/Fiery\\ X3eTY\\ 35C-KM\\ PS\\ v2.01\\ eu -o printer-is-shared=false" with administrator privileges
#Admin Printers.
#Reception Bonjour.
do shell script "lpadmin -p Reception -L Ground\\ Floor\\ Reception -E -v mdns://Reception%20%2892%3A1b%3A58%29.pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#A3_Northside Bonjour.
do shell script "lpadmin -p A3_Northside -L First\\ Floor\\ North\\ Side -E -v mdns://A3Northside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#A3_Southside Bonjour.
do shell script "lpadmin -p A3_Southside -L First\\ Floor\\ South\\ Side -E -v mdns://A3Southside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#Studio3_Admin Bonjour.
do shell script "lpadmin -p Studio3_Admin -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Studio1_Admin Bonjour.
do shell script "lpadmin -p Studio1_Admin -L First\\ Floor\\ Studio\\ 1 -E -v mdns://Studio1Admin%20%2892%3A41%3Af6%29._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#Studio3_A3 Bonjour.
do shell script "lpadmin -p Studio3_A3 -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3A3._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ LaserJet\\ 5100\\ Series.gz -o printer-is-shared=false" with administrator privileges
#Plotters.
#PlotterDeathstarHP4500ps Bonjour.
do shell script "lpadmin -p PlotterDeathStarHP4500ps -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterDeathstar_HP4500ps._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ Designjet\\ 4500\\ PS3.gz -o printer-is-shared=false" with administrator privileges
#PlotterPosterEpson7600 Bonjour.
do shell script "lpadmin -p PlotterPosterEpson7600 -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterPosterEpson7600.printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/en.lproj/stp-escp2-7600.5.2.ppd.gz -o printer-is-shared=false" with administrator privileges
#Copy a fresh copy of the printer driver settings back onto the system after the printers have been installed. driver settings are stored in /etc/cups/PPD admin rights required to copy files into this folder
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/ppd/* /etc/cups/PPD" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences" with administrator privileges
#The following printer is added into the system speratly due to a driver selection issue when adding more than one Xerox Phaser 4510DT. The system seems to apply the correct driver to the first one that is added to the system. The second Xerox Phaser 4510DT does not get the correct driver applied to it.
#Studio2_Admin Bonjour.
do shell script "lpadmin -p Studio2_Admin -L First\\ Floor\\ Studio\\ 2 -E -v mdns://Studio2Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences"
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04_Printers/PrinterAutoInstall/ppd/Studio2Admin.ppd /etc/cups/PPD/" with administrator privileges
#Reset file permissions
do shell script "chmod 664 /Library/Printers/PPDs/Contents/Resources/*" with administrator privileges

Well, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

Can't delete printer - client-error-not-found

After messing around with the installation of a cups based network printer (via a local Suse server) I came across some strange problems with my printer setup utility. Currently, I can neither delete nor add a printer from the list for the current user. When trying to delete a previously installed network printer I get an error message that the printer could not be removed (client-error-not-found). When trying to add a new printer I won't get an error message, but the printer is not being added to the list anyhow.
I already tried to reset the printing system both with the printer setup utility and with the Printer Setup Repair Tool from Fixamac, both without success.
I have to note that for user root everything works fine!
Any suggestions?
Wolfgang
MacBook Pro Mac OS X (10.4.8)

Well, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Error: Not Found Error: Out of Memory

Hello,
I'm trying to use a few photoshop files in Final Cut Pro 7.0.3 and I can't seem to shake these error messages.
I've never had trouble using Photoshop files in the past but these ones are being uncooporative.
I've imported the .psd file and edited it into the sequence. The sequence setting match the clip settings. Then I've added the "Page Peel" Transition to the edit point. Immediately the canvas goes red and says something like "close and open window to restore preview." After this I try to play the sequence and it says "Error: Not Found." After closing and reopening the sequence my attempts to play back my work result in the error "Error: Not Found" followed immediately by "Out of Memory."
I opened activity monitor to try and see if I was running out of ram space and I've got loads left. I also have plenty of room on the hard disk I'm working from.
Any thoughts?
Thanks,
Ryan

Check your PSD documents, make sure they are RGB 8 Bits/Channel.
MtD

WCF Error: The remote server returned an error: Not Found

I have a windows phone8 app that utilizes a azure WCF service. I added the Servicereference to my project,when i call the service method it executes fine but getting the following error after executing:
System.ServiceModel.CommunicationException: The remote server returned an error: Not Found
Here's the code where my error's occuring (the error occurs on the 2nd line of code within the method(the line that contains "_result =
public string EndSendMessage(System.IAsyncResult result) {
                object[] _args = new object[0];
                string _result = ((string)(base.EndInvoke("SendMessage", _args, result)));
                return _result;
Any idea why this is happening?
Thanks.

Hi Narendramacha,
It may be have more than one possibility reasons. Did you try the service URL in the phone/emulator Internet Explorer to be sure the url is accessible ? About this error, I found some solutions , please refer to :
1.maxStringContentLength: http://stackoverflow.com/a/5185678
2.FireWall: http://stackoverflow.com/a/15594388
Please try it. Any results, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Tasklist ERROR: Not Found

Hey all,
So I have a Windows 2008 server (32 Bit) and I'm trying to run Tasklist from the command prompt. When I do so, I recieve the "ERROR: Not Found" error. If I run it with the "?" flag then I do get the help file. I have done some searching
but haven't found any solutions that work.
I just finished running a check disk, which was the last option that I saw. I also restored the files from a different server that is working but it still isn't. I have reviewed my eventlogs but don't see any that might be associated with this
issue.
I just don't know where to go from here. Any suggestions??
Thanks...

Hi,
> So I have a Windows 2008 server (32 Bit) and I'm trying to run Tasklist from the command prompt. When I
> do so, I recieve the "ERROR: Not Found" error
Which user context did you run command prompt, administrator or normal users? Have you tried to run it with elevated command prompt?
Since you run Windows 2008 Server, you can find tasklist.exe in location “%windir%\system32\tasklist.exe”
Run command prompt with elevated privilege, and change command execute path to “%windir%\system32\”, then run tasklist.exe and check the result.
Also please check whether you can run “taskkill.exe” command?
Test that and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Tasklist
http://technet.microsoft.com/en-us/library/bb491010.aspx
Cannot Use Tasklist.exe Error: Not Found
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/5da0e28e-24fb-4223-a548-372623f9b723
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Error Not Found(404)

Hi All,
I Have created a setup package for mobile 2005 device.I am able to download DB2e but when i click on the application link i m getting the following error messgae.
Error Not Found(404)
Original request:/zapp/start
Not Found Request:/zapp/start
Does anyone has idea why its happening.Please suggest
Thanks
Regards
Devendra Phate

Hi Devendra,
It looks like that you have deployed the DB2e as an application. You shoud deploy is as an add-on. Undeploy and proceed as described in the OSS note 889257 for how to install and deploy DB2e
Link (https://websmp208.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=0000889257&nlang=E)
Regards
Jacob Wesenberg

[SOLVED] rEFInd -- Error: Not Found while loading vmlinuz-linux

System Info:
3.14.1-1-ARCH
refind-efi-0.7.8-1
Problem: rEFInd does not boot arch linux.
When booting the machine, rEFInd's gui selection menu presents options for windows or linux.
Upon selecting linux, the following is displayed:
rEFInd - Booting OS
Starting vmlinuz-linux
Using load options 'ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772 initrd=\boot\initramfs-linux.img'
Invalid loader file!
Error: Not Found while loading vmlinuz-linux
* Hit any key to continue *
Below are the outputs of blkid, lsblk -f, the structure of /boot and cats of /boot/efi/EFI/refind/refind.conf and /boot/refind_linux.conf
blkid
/dev/sda1: UUID="2014-05-01-05-20-54-00" LABEL="ARCH_201405" TYPE="iso9660" PTUUID="1535e446" PTTYPE="dos" PARTUUID="1535e446-01"
/dev/sda2: SEC_TYPE="msdos" LABEL="ARCHISO_EFI" UUID="96ED-5DA9" TYPE="vfat" PARTUUID="1535e446-02"
/dev/sdb1: LABEL="Recovery" UUID="E63202B832028E2D" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="e3729f62-9c32-4ac9-a9dd-56a9c073e7e5"
/dev/sdb2: UUID="9C03-552D" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="9bcdb083-82e9-49e6-b03d-fd376585d633"
/dev/sdb4: UUID="B2161962161928BD" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="6de10de9-3322-486c-8108-bf14f5a7bcb6"
/dev/sdb5: UUID="bd6b3352-1b79-4c70-a061-21ff87ff0772" TYPE="ext4" PARTLABEL="root" PARTUUID="699115b1-1413-42b3-9fd7-a80a8a51b6fa"
/dev/sdb6: UUID="e71e6a25-913a-4932-9fc9-81942a5dab2e" TYPE="ext4" PARTLABEL="home" PARTUUID="1fc33e24-4c26-459c-a80a-9440e1f4e683"
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="f07bfb26-3377-487a-a022-efd840614a0d" TYPE="ext4"
/dev/loop2: UUID="f07bfb26-3377-487a-a022-efd840614a0d" TYPE="ext4"
/dev/mapper/arch_root-image: UUID="f07bfb26-3377-487a-a022-efd840614a0d" TYPE="ext4"
/dev/sdb3: PARTLABEL="Microsoft reserved partition" PARTUUID="fa94c812-e1ff-4603-ba97-be7f155f12c8"
lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sdb
├─sdb1
├─sdb2 /boot/efi
├─sdb3
├─sdb4
├─sdb5 /
└─sdb6 /home
sdc
├─sdc1
└─sdc2
loop0
loop1
└─arch_root-image /etc/resolv.conf
loop2
└─arch_root-image /etc/resolv.conf
Structure of /boot
*note: /boot is really the original microsoft efi system partition (in my case, /dev/sda2) that I mounted to /boot/efi and whose structure is shown below:
/boot
├── efi
│ ├── EFI
│ │ ├── Boot
│ │ │ └── bootx64.efi
│ │ ├── Microsoft
│ │ │ └── Boot
│ │ │ ├── BCD
│ │ │ ├── BCD.LOG
│ │ │ ├── BCD.LOG1
│ │ │ ├── BCD.LOG2
│ │ │ ├── bg-BG
│ │ │ │ ├── bootmgfw.efi.mui
│ │ │ │ └── bootmgr.efi.mui
│ │ │ ├── bootmgfw.efi
│ │ │ ├── bootmgr.efi
│ │ │ ├── BOOTSTAT.DAT
│ │ │ ├── boot.stl
│ │ │ ├── en-US
│ │ │ │ ├── bootmgfw.efi.mui
│ │ │ │ ├── bootmgr.efi.mui
│ │ │ │ └── memtest.efi.mui
│ │ │ ├── Fonts
│ │ │ │ ├── {{FONTS REMOVED FOR BREVITY}}
│ │ │ ├── Resources
│ │ │ │ ├── bootres.dll
│ │ │ │ └── en-US
│ │ │ │ └── bootres.dll.mui
│ │ ├── refind
│ │ │ ├── drivers_x64
│ │ │ │ └── ext4_x64.efi
│ │ │ ├── icons
│ │ │ │ ├── {{ICONS REMOVED FOR BREVITY}}
│ │ │ ├── keys
│ │ │ │ ├── altlinux.cer
│ │ │ │ ├── canonical-uefi-ca.der
│ │ │ │ ├── fedora-ca.cer
│ │ │ │ ├── openSUSE-UEFI-CA-Certificate.cer
│ │ │ │ ├── refind.cer
│ │ │ │ └── SLES-UEFI-CA-Certificate.cer
│ │ │ ├── refind.conf <=================== http://ix.io/cFy
│ │ │ └── refind_x64.efi
│ │ └── tools
│ ├── initramfs-linux-fallback.img
│ ├── initramfs-linux.img
│ └── vmlinuz-linux
└── refind_linux.conf <===================== http://ix.io/cFw
49 directories, 190 files
Excerpt of /boot/efi/EFI/refind/refind.conf
(full file available here: http://ix.io/cFy)
menuentry Linux {
icon EFI/refind/icons/os_arch.icns
volume "EFI system partition"
loader /boot/vmlinuz-linux
initrd /boot/initramfs-linux.img
options "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772"
cat /boot/refind_linux.conf
"Boot with standard options" "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772 "
"Boot to single-user mode" "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772 single"
"Boot with minimal options" "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772"
Last edited by dk0r (2014-05-28 01:36:16)

A couple of things that are important:
refind_linux.conf should be in the same directory as vmlinuz-linux and the initrd so it should be in /boot/ since that is where your kernel is.
In your refind.conf stanza you have the line volume "EFI system partition" which tells rEFInd that the loader is in that partition whereas the kernel and initrd files seem to be in /boot/ which is not the EFI System Partition. Hence the volume line needs to specify the filesystem where /boot is which in your case appears to be /dev/sdb5 so the volume line in that case should be volume "root" since root is the filesystem label for sdb5? Note that if you update to rEFInd version 0.8.0 or later then you can use the partuuid value to specify the volume but in the version you are using that token for the volume was not yet implemented.
In the stanza you quoted there was no terminating } but maybe you just didn't copy it to your post.
Making these changes may let the system boot to the arch kernel.
Last edited by mcloaked (2014-05-27 20:21:16)

Trying to render, get "Not Found" mesages

Seems like I've had this problem years ago, but I can't remember what caused it.
I have a section with 3 video tracks, 2 of which are nested sequences. When I try to render, it will render a portion of it if I hit "cancel", but if I try to render the whole section there is a message that says "not found" and nothing else was rendered.
I also saw "General Error" once or twice.
Any idea how I can fix this?

What format are you sources and what are your sequence settings? I assume your nests' settings match the containing sequence (but if not, let us know).
You might try rendering within the nest and see if that's successful.

Import export utility user not found

I'm getting the following error when running the 9.3.1 ImportExportUtility on a 9.2.0.2 version of Shared Services. NTLM is used as the authentication provider.
2009-06-19 08:49:30,642 Export : Exception encountered while retrieving user ntlm://SID=S-1-5-21-2134593322-327503246-231145771-21130?USER
2009-06-19 08:49:30,642 Export : Root cause : User not found with identity = ntlm://SID=S-1-5-21-2134593322-327503246-231145771-21130?USER
2009-06-19 08:49:30,658 Export : Silently ignoring the last error
There were 99 users extracted and this message appeared for 36 of the 99. Could someone tell me where the users are not in sync. Is it between Open Ldap and NTLM, Open Ldap and the application repository, etc. Also, is there a way of identifying the user Id. from the message.
Thanks,
Tom

I finally found a real solution to this problem and I wish I had found it sooner.......
Starting sometime around 9.2, Oracle started including a tool called : UpdateNativeDir
The primary purpose of the tool (as I understand it) is to allow you to do a refresh between your external provider (i.e. Active Directory) and the native (OpenLDAP) directory in the event you moved directories around. This tool will also purge any invalid entries that are in the local (LDAP) directory that are not in the external provider.
The tool is pretty straight forward and the readme file explains the details of how to use it.
I've tested this tool in our dev and production environments now and it does exactly what I need. The additional benefit is that I can schedule this to run periodically to ensure the directories are sync'd.
The tool is going to be on your Shared Services machine and comes zipped in a file called UpdateNativeDir.zip
According to the documention (9.2.0.3) it is located at :
<Hyperion_Home>/common/utilities/nativedirectoryupdateutility
On our 9.3.1 Shared Services box, I located it at :
<Hyperion_Home>/common/utilities/SyncOpenLdapUtility

Getting error : " not found Number object J_1IDEPINV "

Hi SAP Expert,
When I am posting Excise Invoice at Depot using J1iJ, i am getting the error : " Error in allocating Depot Invoice number Interval not found Number object J_1IDEPINV " when trying to Save.
Already checked that I have maintained the number range for object J_1IDEPINV in J1i9 for my series group. But I am still getting the same error. Any clue ?

You would have maintained the number range for the required series group but ensure that it is maintained for the current year.
thanks
G. Lakshmipathi

Export render errors - is fxfaxtory the problem

We have a project with mainly XDCAM HD 422, some clips have luminetri color correction applied with a vignette from an effect that comes with the fxfactory stuff. When I try to export the clip (11 minutes if length), it takes a very long time (30-40 minutes!!!), and that's because of the effects applied. but what's even worse: the parts with luminetri and fxfactory effects have render errors!!
Once even one of the fxfactory transitions had black stuff coming with the exported clip (we tried it with mxf/XDCAM and mov/apple pro res, almost same result, just the errors change...)
What's going on with premiere pro? 7.2.1 seems to be really buggy. Any other with similar experiences?
We are using Mac OSX 10.8.5.

Anyone using fxfactory and is having trouble with it?

Rending problem - "not found!"

When I rendered my sequences with FCP 7, at the end of long time as 2 or 3 hours rendering time,
the message "Not Found!" appeared and I failed rendering. If I render the same sequences again, the same thing happens.
Please let me know why this thing happens and how I can solve this problem.
My sequences are usually more or less 1 hour long.
Last night I didn't sleep at all.
Rending and failure, rendering and failure...
So I rendered the sequence by manually selecting 5 minutes portions so many times in one sequence and at last done.
Please help me about this problem.
Jaehyun from Korea

Why are you rendering? If it is because the material does not match the sequence settings, you should correct that first (then you won't need to render).
If the material is H.264, AVCHD or similar non-native FCP formats, convert them to ProRes (LT is fine for most consumer formats) before you bring the material into FCP.
Either Compressor or Mpeg Streamclip are the standard apps for this purpose.
x

[SOLVED] yaourt ERROR "not found in AUR"

Hi, when I run
yaourt -Syua
it shows
==> Downloading fontconfig-ubuntu PKGBUILD from AUR...
==> ERROR: fontconfig-ubuntu not found in AUR.
==> ERROR: unable to update
==> Downloading google-chrome-dev PKGBUILD from AUR...
==> ERROR: google-chrome-dev not found in AUR.
==> ERROR: unable to update
It's quite strange. I tried
wget https://aur.archlinux.org/packages/go/google-chrome-dev/PKGBUILD
and it works well. Could someone help me with it?
Last edited by clippit (2012-02-19 12:28:28)

https://bbs.archlinux.org/viewtopic.php … 1#p1060081
http://bugs.archlinux.fr/task/268
https://bugs.archlinux.org/task/28515

Export / Render error - "Not found"

Similar Messages

Maybe you are looking for