Export reports views doesn't work

export the report view's in a file doesn't work. The file is created but still empty. Workaround is to get the sql and execute it in worksheet edit and cut and past the result in a excel sheet. It woul be better if the export works fine.

This is working fine for me.
What version of SQL Developer are you using?
What OS are you on?
What report did you run?
What type of output did you select?
-- Sharon

Similar Messages

Export report Excel-Data Only works not,'not enough memory for operation'

Hi all,
we are using in our Software CrystalReport Version 11 Service Pack 5. Crystal report is intergated for .NET. We can not uninstall CrystalReport Version 11 Service Pack 5 to install another Version or another Service Pack.
We are haveing problems to export report as Excel 97-2000 Data Only, "not enough memory for operation" message pop up after you try to export report as Excel data Only.
Export Report as PDF is working fine.
This problems are on Windows XP Sp3 and Vista. On Windows 7 we have no problem.
Please, can somebody help me solving this problem, or to finde a workaround for Windows XP. Memory from PC is not the problem.
Mit freundlichen Grüßen / Kind regards
Odisej Nujiq

Odisej, unfortunately, processes such as remote sessions are reserved for phone cases only. You can create a phone case here;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Also, just as an FYI, see the blog [What are these 'support' forums good for anyhow?|/people/ludek.uher/blog/2011/04/07/what-are-these-support-forums-good-for-anyhow]
Without phone support, you are left to do most of the foot work your self. On the forums, we can provide suggestions and guidance, but that is about it.
Couple of things to note though. If you do create a phone case, one of the 1st things that you will be asked is to update your app to SP6 - unless you can prove the same issue exists with SP6 (see more bellow).
Something I would recommend you try is to take an XP box, install SP6 on it, then install your app on it. If this works, your options are highly limited. E.g.; SP6...
One other utility that may be worthwhile to use is [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx]. Run that on the XP box. In the logs, look for "Access Denied" error messages. Look for load or other issues with crxf_xls.dll, exportmodeller.dll and crtslv.dll.
From your responses I am still not sure if you actually did run Modules and compared the results. This is much, much easier to do than working with ProcMon and I'd start there. To summarize, my troubleshooting plan (irrespective of the limits imposed on you) would be:
1) Use Modules as this is the easiest thing you can do
2) Try this with SP6 - more work that (1) above, but at least you are on the latest. If this works, banging your head into an SP5 wall will do you no good (like I said, irrespective of what ever limits...)
3) Use ProcMon - not too difficult, but time consuming as you will be looking over 100s, possibly 1000s of lines and not being familiar with details of CR, this will take time.
- Ludek

Cropping pictures with Viewer doesn't work.

Cropping pictures with Viewer doesn't work.
Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
I would try:
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
if that doesn't help, then I'd reinstall Mavericks over your current installation.

Report Viewer doesn't Preview after Export

The Windows Application has a C# class for a Report Menu which calls any one of several reports. The Report Menu allows the selection of various parameters for the report being called and then calls a C# class that builds a sql query and sets it as the report data source and sets the report parameters then opens the report in Crystal report viewer.
The report displays in the viewer and I can click on the close button and the Report Menu in the App allows me to select a different report with different parameters, no problem.
However, when any report is previewed in the viewer, before clicking the close button, I can click on the Export button and successfully export the report in whatever format and get "Export Completed". Then click on the close button and I am back at the Report Menu in the App. Try to preview any report now and it will crash. The error messages vary somewhat depending on the report selected. I can set a break point at the beginning of the class (that builds the query and sets the data source) and hit that break before doing an Export - -
but after the export the break point is never hit. Its like the Report Menu class is somehow trying to display the report without calling the report building class!
VS 2005 and CR XI R2

OK. A good place to start is with the basics.
See the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]
Step 2 Asking Your Question; Provide Enough Information
So, please provide the necessary info as per the above.
Also:
" The error messages vary somewhat depending on the report selected. I can set a break point at the beginning of the class (that builds the query and sets the data source) and hit that break before doing an Export - -"
Please provide the most common error you get, else provide all of the errors.
Ludek

Row Fetch on View doesn't work / Custom procedure needed???

Hello guys!
Again I have a problem. It seems like once I finish one problem I stumble into another one. :-(
Would is breaking my neck is the following problem.
I have a view based on a query that joins 3 tables including one via a database-link. I would like and need to use that view as the source for the automatic row fetch! However, when creating the automatic-fetch-row process, the items on my page do not get populated. However, If I change the cource for the fetch-row-process to a view made of only a single table it works like a charm. Could it be that the automatic fetch-row procedure doesn't work with joined views and db-links at all??? If so, could you please give me an example of a PL/SQL procedure that will populate items on page reload and load!
It's extremely urgent and I appreciate every input!
Thanks guys! I hope you some ideas and hints!
Regards,
Sebastian

Ah, ok - I probably read too much into your update (still thinking that it was related to the "view" issue in your first post :) ) - so an INSTEAD OF trigger won't be needed if this is just a single table!
There are a few ways that adding an extra column into a tabular form would stop it being updated. Typically, this could be if the new column forms part of the "Primary key" for the data. If this is the case, you need to ensure that the processes recognise this. It can also be that you have set the item to DISABLED or READONLY - these items are not submitted with the page, so even if you set the item's value somehow, that will never get back into the record (there are ways to take off the DISABLED or READONLY attributes immediately prior to the submit, if need be). That could also happen if you have set the item to be a Standard Report Column - this is just displayed text, so doesn't form part of the submitted data. You can get around that by having a hidden column with the actual data in there as well - if you have ever created a tabular form using the simple EMP table example, you'll see EMPNO and EMPNO_DISPLAY - both contain EMPNO but only the basic EMPNO hidden item is submitted. Another, perhaps rare, possibility is if you have used the APEX_ITEM package to create any of the output and have used an index number that has been automatically assigned to another column - for example, if you have APEX_ITEM.TEXT(1, ....), which gives each item a name value of "f01", then this is most likely going to double up with the index for the hidden primary key item (which is usually first in the list). If this is the case, just change the index of your APEX_ITEM item to some high number (anything up to 50).
Finally, you say "INV_PT_ID_SUB is also bound to an item PTIDS" - what is PTIDS? The MRU processes need to understand what column to update and relies on the settings for primary keys and the column names in the SQL query.
The MRU's only know about their own settings - the workspace, tablename and primary keys etc. They contain no details of individual columns as such, so adding in extra columns shouldn't be a problem. In fact, I've added/deleted so many columns from tabular forms, that I'd be really annoyed if I had to start from scratch every time!!
Andy

APEX_ITEM report - SORT doesn't work

Hi,
For the following report, the SORT doesn't work. I've also tried with the "Report Attributes", but same result. Does someone know is there a way to make it sorted or can confirm it's not possible.
Thanks.
SELECT
APEX_ITEM.CHECKBOX(11,id_cc_delai_recueil) id_cc_delai_recueil,
APEX_ITEM.HIDDEN(12,id_cc_delai_recueil)||APEX_ITEM.HIDDEN(13,id_cc_regle)||APEX_ITEM.TEXT(14,numdelai,3) numdelai,
APEX_ITEM.SELECT_LIST_FROM_LOV(15,typedoss,'DOSSIERS OU DOCUMENTS',NULL,'NO') typedoss,
APEX_ITEM.TEXT(16,suppdoss,3) suppdoss,
APEX_ITEM.SELECT_LIST_FROM_LOV(17,rem_suppdoss,'REMARQUE_DELAI',NULL,'YES','','') rem_suppdoss,
APEX_ITEM.TEXT(18,perioactif,3) perioactif,
APEX_ITEM.SELECT_LIST_FROM_LOV(19,rem_perioactif,'REMARQUE_DELAI',NULL,'YES','','') rem_perioactif,
APEX_ITEM.TEXT(20,periosmact,3) periosmact,
APEX_ITEM.SELECT_LIST_FROM_LOV(21,rem_periosmact,'REMARQUE_DELAI',NULL,'YES','','') rem_periosmact,
APEX_ITEM.SELECT_LIST_FROM_LOV(22,dispoinact,'DISPOSITION1',NULL,'NO') dispoinact,
APEX_ITEM.SELECT_LIST_FROM_LOV(23,rem_dispoinact,'REMARQUE_DELAI',NULL,'YES','','') rem_dispoinact
FROM
cc_delai_recueil
WHERE id_cc_regle = :P52_ID_CC_REGLE
ORDER BY
3,
2

Paulo,
Remove the Order By clause from your Select statement and then use the Report Attributes to determine your sort order.
Jeff

Report viewer is not working in google chrome?!

How to display the report viewer control in google chrome?!
I used report viewer in aspx page.
The report viewer is working in all the browser exept in Google chrome.
What to do to work the report viewer in Google chrome?!
Manikannan N Software Engineer

Example....
<
rsweb:ReportViewer
ID="reporter"
runat="server"
Width="740"
Height="550"
BackColor="#F2F5F2"
SizeToReportContent="false"
ExportContentDisposition="AlwaysInline"
ProcessingMode="Remote"
ShowToolBar="true"
ShowPageNavigationControls="true"
ShowZoomControl="false"
ShowDocumentMapButton="false"
ShowFindControls="False"
ShowBackButton="false"
ShowExportControls="false"
ShowPrintButton="false"
ShowParameterPrompts="false"
ToolBarItemBorderStyle="Solid"
ShowRefreshButton="false"
ToolBarItemBorderColor="Black"EnableTheming="false"
AsyncRendering="true"
Enabled="false"
Visible="false"></rsweb:ReportViewer>
and jquery
window.onload =
function() {
$(window.frames[0].window.frames['report'].document.getElementById('oReportDiv')).attr('style',
'overflow: none;');

Just installed Firefox 5.0 and now my JS View doesn't work. Tried to re-install but no go. Any thoughts?

Windows XP. If it doesn't work is it possible that I can go back to Firefox 4?

Yes, that's it. I did try that before and then again after your response but still no luck. What I'm thinking is that the JS View 2.0.5 add on is not yet compatible with the new Firefox 5. If that's the case then I would hope that it will soon be compatible. The problem is that I actually use that every day and now I'm kinda stuck. Still open to any thoughts if you have any. I am willing to go back to Firefox 4 is that is still possible.

Export to excel doesn't work anymore

Hello all;
I recently re-installed Excel, and the "export to excel" function in B1 doesn't work anymore. Even when I do "File> Export> MS-excel", it doesn't offer an *.xls file type to save.
Any ideas?
Thanks,
Lazar

Dear Lazo,
For export option activate On SAP B1 client machine you have go general setting > Go to path > than provide SAP sever Excel Doc Path.
and please confirm in that folder Auto open.xls file is there or not.
and than go to new excel file > Tools >Option .security > Macro setting > Select Security level Medium.
Than try to open excel file.
May it help you.
If its not work so you check on sever if its working on sever than if definitely client machine problem.
for that you have re-installed SAP client.
Regards
Mangesh Pagdhare.

Report script doesn't work

Hello everyone,
Not sure what I am doing but for some reason my report scrip doesn't seem to be working. I can't understand why, the syntax is correct as far as I can see.
<Column (Sparse1)
Sparse1
<Row (Dense1,"S2,D2,S3,S4,S5,S6,D3,S7)
D1 - L0 member
S2 - L0 member
D2 - L0 member
D3 - L0 member
S3 - L0 member
S4 - L0 member
S5 - L0 member
S6 - L0 member
S7 - L5 member
Actual code
<Column (Period)
Jan
<Row (Account,Buyer,Currency,Version,Year,Site,Seller,Scenario,Supplier)
Profit
Buyer001
Dollar_USD
Draft_version
Y2013
Site001
Seller001
Budget
Total_Supplier
When I execute this, I don't get anything, when I have the same combination in Excel, I can see a figure.
Any insight into this would be grateful.
Edited by: N13 on May 14, 2013 2:14 AM
Edited by: N13 on May 14, 2013 2:15 AM

Ignore, it's fine. I manage to solve it, turns out that I didn't put the "!" sign at the bottom.

Sub-report link doesn't work at run-time

We have a main report and a sub-report linked to main-report. On clicking the sub-report link in the CR 2008 designer, sub-report page with data is rendered properly. Same doesn't work programmatically at run-time using Java SDK library (JRC). Any thoughts/suggestions?

Hi,
I am facing same problem. Please help.
Thanks,
Chanchal

Link in my customized Report Template doesn't work – Apex 3.1

I created a report template based on columns of my report
My query report is:
SELECT MEM_NAS ID, MEM_NOM NAME, MEM_DATE_NAIS BIRTH
FROM ACMT_MEMBRE;
My customized report template have this Row Template definition:
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td #ALIGNMENT# class="t16data_edit">#NAME#</td>
<td #ALIGNMENT# class="t16data_edit">#BIRTH#</td>
</tr>
This would redirect to the page 6 when user click anywhere on a row but it doesn’t work.
I have this error message:
CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');">
I realized that problem is caused by #ID# because if I hardcode this ID, it works.
How can my report template get the “ID” from my query report ?
Apex version: 3.1
Edited by: mario_romero77 on Jun 8, 2012 10:06 AM

mario_romero77 wrote:
I created a report template based on columns of my reportAlways post code wrapped in <tt>\...\</tt> tags to prevent the forum software mangling it.
My query report is:
SELECT MEM_NAS ID, MEM_NOM NAME, MEM_DATE_NAIS BIRTH
FROM ACMT_MEMBRE; My customized report template have this Row Template definition:
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td #ALIGNMENT# class="t16data_edit">#NAME#</td>
<td #ALIGNMENT# class="t16data_edit">#BIRTH#</td>
</tr>
Is the report template definitely of type Named Column (row template) (defined on App Builder page 4000:4654) and not Generic Columns (column template) (defined on page 400:258)?
Note that the <tt>#ALIGNMENT#</tt> substitution string is not supported in named column templates. Set column alignment explicitly using HTML attributes in the template, or use CSS.
This would redirect to the page 6 when user click anywhere on a row but it doesn’t work.
I have this error message:
CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');">
{code}Where do you see this? It looks like there's a mismatch between the report columns returned by the query and those referenced in the report template. Or the data contains unsafe HTML characters that aren't being escaped.
Yes, my report query has a column called ID and it's set as Hidden. This could be the problem. In a report based on a named column template any columns referenced in the template must be +shown+ in the report, even if (as in this case) the column value is not visible to the user: the positioning of the <tt>#ID#</tt> column placeholder in the <tt>onclick</tt> attribute rather than in a table cell is what makes it "hidden". *The Show checkbox for the ID column must be checked.*
From the gobbledygook being generated it looks like there could be a row selector checkbox column in this report as well? Named column row templates must include substitution placeholders for every shown column. It's also advisable to keep the columns in the same order in the SQL, report column attributes and row template.
Something like
{code}
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td class="t16data_edit">#CHECK$01#</td>
<td class="t16data_edit">#NAME#</td>
<td class="t16data_edit">#BIRTH#</td>
</tr>
{code}
I realized that problem is caused by #ID# because if I hardcode this ID, it works.
How can my report template get the “ID” from my query report ?If the above doesn't help then the easiest way to troubleshoot this would be for you to upload the app to apex.oracle.com and post guest developer credentials for the workspace so we can see the whole thing: template, SQL, and report attributes. Otherwise we're likely to and up with a lot of tedious to and fro here posting bits of code and attribute values.

Broken links report generator doesn't work

I found a website that didn't work with Firefox 3.6.15. I selected the Report broken website menu item. Typed in the problem description and clicked the Submit button. The popup broken link report continues to show 'sending report' with an in progress bar for the last 10 minutes! Apparently report sw cannot contact Firefox server to send report.

Mozilla Website Evangelism has ended, the '''Report Broken Website...''' function is gone in 4.0 & later versions, and the server was shutdown in December - which is the problem you are experiencing. You can use the Submit Feedback... feature in the Help menu in 4.0 & later, but if the report is about a website that doesn't work properly in Firefox, Mozilla isn't going to contact the website and encourage them to fix their issues.

PDF viewer doesn't work in FF 36.0.4 for Mac

Macbook Pro with Yosemite and FF 36.0.4: Built in PDF viewer no longer works. Clicking on PDF links in search engines does not bring up the built in viewer.
Restoring FF 35 restores the PDF viewer.

I understand that the PDF viewer in Firefox is no longer working. I have reset the application settings for the pdf file mimetype in the Firefox Application settings.
*[[Applications panel - Set how Firefox handles different types of files]]
If the default continues not to work after resetting this setting, please check out a work around:
In order to change the default reader for PDF files (to not open PDF files with Firefox's internal PDF reader), follow these steps:
#Click the menu button [[Image:New Fx Menu]] and click Options (Preferences for Linux and Mac).
#In the Options (Preferences for Linux and Mac) window, select the ''Applications'' panel.
#In the ''Search'' field, type ''PDF''. You should find ''Portable Document Format (PDF)''.
#On the right hand side you should find an ''Action'' column. Use that to select your favorite PDF reader. In order to view PDF files in Firefox, choose ''Preview in Firefox''.
Did this fix your problems? Please report back to us!
Thank you.

My Help Viewer doesn't work properly-The selected topic is currently unavailable Make sure you're connected to the Internet. For help connecting, choose Apple menu System Preferences, click Network, and click "Assist me." If you're connected to the Inte

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Export reports views doesn't work

Similar Messages

Maybe you are looking for