Export setting when mp4 clips are in timeline

I have a movie montague of different clips, including mp4 clips.. When I export, no matter what format I export in it makes the final movie all jittery, iall of the mp4 clips do not play properly, what format do I export in to make it play smoothly?

If your mp4 files are interlaced, and you output has a different field order, it will make the output jittery.
Check the mp4 field order, it should have one of three possible values: progressive (if it's this, there is some other problem), upper field first, and lower field first.
Whatever it is, see if it matches the output (which will also have one of those three field orders).
If they are both progressive, let me know and we can figure out other solutions.

Similar Messages

16:9 Aspect Ratio reverts to 4:3 when rejected clips are moved to trash.

Mini DV Tape imported to an event with Aspect Ratio Preference set to 16:9. Parts of some clips marked as rejected. When rejected clips are moved to trash the aspect ratio of both the Event and the Project revert to 4:3.

This has always worked for me:
FCP: File Export QTMovie... current settings.
COMPRESSOR: 16:9 High Quality 90 minute (choose ac3 for your audio in here)
Then, in DVDSP make sure the setting is correct in the above window.
Also - check your preview (forgot what it's called)you can change it to widescreen also. Dbl check there that indeed all is good.
Then, as said above also - run it on DVDPlayer in your applications folder. Don't watch it FULL screen, watch it as a window in your finder. There you'll get a read on EXACTLY what the dvd is sending... if you see a 4:3 window with letterboxing something is wrong. You should (SHOULD) see a 16:9 window with no distortion or letterboxing.
Once you determine that, the issue will be your setup of DVD player and TV.
CaptM

CAD VIEW Error : "Status can only be set when all originals are stored"

Hi Friends,
I have Proe to SAP integrated and when I open Proe model in CAD VIEW and try to create a document it shows an error "Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this ?
Rgds,
SM

Hello Sudharshan,
"Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
This is error is indicating that your original CAD model is not checked in and as per your configuration you require the original to be checked in before moving to next status.
Please:
1. Check your document status network.
2. ensure that you have proper set up for the fields "check in" in the current status. This indicator should be set. This ensures that the document is automatically checked in before moving to the next status. This will solve your problem.
When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this ?
Because of the above set up missing the original DIR is missing the original document and hence the system assumes you are creating a new DIR when you click on the object in CAD view.
regards,
N K

Message no. 26269 : Status can only be set when all originals are stored

Hi,
While changing status in cv02n, i am getting the below message no-Message no. 26269 : Status can only be set when all originals are stored. I am not getting the message solution in google. please guide me how to come over from this message.
Regards,
Mastan.

Collegues! Have you any idea?
Found this - [recommendation|http://help.sap.com/saphelp_47x200/helpdata/en/0c/b98e3c90347b17e10000000a114084/content.htm] - how to, but there so simple scenario without details about standart functionality.
Check In
You can check in originals, which are saved in the local network, into a storage system. The following originals are indicated by the icon:
Originals that are to be checked in for the first time.
Originals that have already been checked in, and loaded into the local network for changing.
To do this start WebDocuments. Process the document info record in the change mode.
Select the original in the Originals dataset.
Choose Check In. The system determines the storage system based on the system settings, and checks in the original.
You return to the data sheet. The original application file is indicated by the Checked In icon.
Save the document.
Very simple, but not work, and no details. Castle icon are not locked. DELETE, CANCEL - work, but not CNANGE.
Maybe my storage system cannot determine the storage system? If it is right, so where can i maintain this option?

When I perform a split audio edit, the timeline doesn't show it when the clips are collapsed!

Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
Thanks

libovh wrote:
Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
Thanks
Like Zambonisurfer suggested, this is so by design.

Audio levels not retained when pasting clips into another timeline

I have FCP 5.1.4
When I copy audio clips with keyframed levels and paste into another timeline, the levels are all messed up upon pasting.
What's the deal? Anyone see this before?

Not sure why such weird behavior occurs (Could it be caused by some corrupted preferences therefore trashing them could solve the problem?). however, as a work around have you tried to copy and paste attributes from the audio clip in sequence 1 to the audio clip in sequence 2? That should give you the same keyframes you had in the copied clip (Original sequence).

Sound disappears when dropping clip to sequence timeline

I have a quicktime clip that plays without problems when in the viewer window. I edit the clip as desired and then place the clip in the sequence timeline. When I try to view the clip, the sound is gone, replaced by a regularly pulsing beep. When I first opened the project and added the clip I got the warning stating my project settings didn't match the clip settings and accepted FC Pro's suggestion to change my project to match the clip. This is the only clip I'm working with. How can I get my sound working correctly?

Rendering doesn't solve the underlying problem. Your audio is not in a standard editing format (perhaps it is mp3?) which can cause you problems down the line.
The audio in FCP (with rare exceptions) should be aiff/ 48khz/16 bit. Other formats, sample rates, etc lead to drifting out of sync, pops and other really annoying anomalies.
good luck,
x

Can I do picture in picture when both clips are in a project?

I want to do picture in picture, but the clip I want as the inserted video needs to be edited first so I can't just take it from the event and drag it onto the other clip in a project. If I edit it within the project, it looks like I cannot then use it for picture in picture. What am I missing?

What you are describing can be done rather easily using FInal Cut Pro X, a $300 tool. But FCPX has a steep learning curve and is expensive, so is there a way to do it using a $15 app?
Yes, there is a way.
1) Edit your picture in picture sequence in a new project. Get it just like you like it.
2) Use SHARE/EXPORT USING QUICKTIME. Choose "Movie to QuickTIme Movie" and click options. Choose Apple Intermediate Codec for the compression under Video Options. Give it a name and save it where you can find it.
3) Now, in iMovie, click FILE/IMPORT MOVIE and import the movie you just made into your Event.
4) You can now drag it in to the original project as a Picture in Picture.

Ghost clip appears in canvas only when other clips are placed in its place

Gd afternoon, this may sound crazy but here we go. the space on the timeline is blank, and when the sequence is played the blank section shows nothing but black screen. however when i drop any clip in the empty space on the timeline an old clip I changed the speed of shows over whatever clip i just dropped in the empty spot. Again, when the spot is empty nothing shows, only when a different clip is placed in that spot does the "ghost" clip appear over the new clip and the space that the ghost clip holds shows a blue rendered line for the speed that was changed.
How do I get rid of this ghost clip?

+thanks, i tried to delete the rendered clip but no help+
No, what is required when the problem reaches the stage you described is to delete ALL of the render files for that sequence. One way to do that is to go to Tools > Render Manager and navigate to the problem sequence and clicking in the Remove column for that sequence. Then click OK.
That will delete all of the render files for the sequence. Then you re-render. This sometimes works, as I said.

My transitions are distorting my clips when the clips are stabilized.

I stablized every clip in my storyboard (timeline), and whenever I add transitions it jumps in and out of stabilization. What do I do?
Final Cut Pro X

I tried that: I shortened the end of the outgoing clip and lengthened the beginning of the incoming clip, so that a centered cross dissolve occupies the same space:
The problem still persists. For this particular transition, the transition shows a frozen frame from the incoming clip, instead of a portion of the video like mentioned above.
I have also tried deleting the render files for the transition; no luck. Could it be some sort of bug or glitch in the program?
Cameron

Export Setting for MP4

I need export speed fast..like around 3mins
but video quality good
Size 680x 480 or 480 x340
how is the datarate....frame.....etc

How about providing your url? That would sure make it a lot easier to see what is happening.
Have you tried changing you movie title to something really short and simple with no underscores and repubishing?

MP4 clips out of sync when dropping onto my timeline and I can't fix it.

I'm trying to drop some mp4 clips onto my timeline in CS6 Premier Pro. The problem is the audio keeps going out of sync. It plays fine elsewhere but for some reason doesn't sync up properly in the timeline and I can't fix it. It looks like the video is slower than the audio/ the audio is quicker. When the clip is on the timeline it has a green line above it where as everything that is in sync has a yellow line. All clips have been imported from my internal drive. I'm using a Macbook Pro 2.4GHz dual-core Intel Core i5. Does anyone know how to fix this?

What is the source of your clips, and do they possibly use a Variable Frame Rate instead of a Constant Frame Rate?
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Why do I need to render an imported clip in the timeline to view it??

I can't figure this out.I have used FCP 3 many times before but now I have imported an H264.mp4 clip into my timeline using FCP 4.5. Now I have to render it to watch it in the timeline?It appears that I have to render any clips I import into the timeline including .mov files.
Is this a FCP 4.5 thing?
I am operating a Dual 867 G4 with 2 gigs of Ram. 10.4.6 OS.
It will take forever to render this project as it is Hours of HD footage.
Thanks so much for any help.
Never had this issue with non HD footage using FCP 3.
G4 dual 867, 2 gig Ram Mac OS X (10.4.6)

Format: H.264 Decoder,368 x 208,Millions
AAC, Stereo(L R).44.100 kHz
23.98
You're dimensions are 368x208? Never seen that size (though, I'm sure there are a multitude of sizes I haven't seen). Did you specify those dimensions in HandBrake or were they default? Did you set those dimensions in your sequence? Look at all of your columns in the browser in regards to the clip properties; enter all of those into the sequence settings. This may be wrong, but I would even specify H.264 as the compressor.
Also, you said "HD footage", but you ripped it off a DVD. Was it a video DVD, or a data disc? If it was video, I believe it would have been compressed and down-rez'd already to SD, so it shouldn't really be HD footage anymore (not native anyway...unless it was a HD-DVD).
Looking to maybe export H.264.mov as another format
using Quicktime Pro. Think that will help?
You could do this, I believe, but it may not be necessary.

Black only error message when all inks are full

My printer ran out of a color some time ago and popped up the black only message box. I have since replaced all of the colored inks and it still gives me the black only message when I go to print and says I need to replace magenta. I just replaced it! My printer is the photosmart C6280. Thank you

Hello Sudharshan,
"Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
This is error is indicating that your original CAD model is not checked in and as per your configuration you require the original to be checked in before moving to next status.
Please:
1. Check your document status network.
2. ensure that you have proper set up for the fields "check in" in the current status. This indicator should be set. This ensures that the document is automatically checked in before moving to the next status. This will solve your problem.
When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this ?
Because of the above set up missing the original DIR is missing the original document and hence the system assumes you are creating a new DIR when you click on the object in CAD view.
regards,
N K

FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MV

What is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD

Export setting when mp4 clips are in timeline

Similar Messages

Maybe you are looking for