Export settings and printing advice for A0 sized poster

hi all.
i have an A0 sized poster (33" x 46") that i am sending off in the mail and while i have notes here somewhere on correct settings at 24 x 36 i was just hoping to get a second opinion on this. the poster will be at an architecture/design conference and i'd like to retain as much detail as possible.
i will be printing at some US printing shop and i'd also love recommendations on what type of paper or other suggestions on media.
THANK YOU for any advice.
Jon

OK, two posters is definitely an inkjet job.
There is no need to export anything to jpeg, unless you are referring to compression of images during the Export to PDF. I mean, as far as effective resolution, the resolution of any raster images you've placed onto the poster. You can read that (ignore the Actual PPI number, you only care about Effective PPI) in either the Info panel with the image selected, or in the Links panel under the link info. Vectors and type don't get rasterized under normal circumstances and scale without degradation in the layout. In the export settings you can set images to downsample to as low as 150 ppi for inkjet work and get satisfactory results, but if you can keep it at 200 ppi or higher and still have a file of managable size I would.
Previewing in ID is iffy. Check the PDF.

Similar Messages

Exporting audio and video together for Mpeg2 dvd

Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed multiplexing to DVD but is still exporting seperately is there something im missing? thanksa

To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
Thanks
Jeff Pulera
Safe Harbor Computers

X301 "File and Printer Sharing for Microsoft Networks" removed at re booting (XP SP-3)

Even if I run the “Network Identification Wizard” (under System properties/Computer Name) to join a Workgroup, the box ‘File and Printer Sharing for Microsoft Networks’ remains unchecked. If I ticked it manually, it remains checked for the current session, but it is unchecked at booting.
The same occurs with the Windows Firewall (I am running that from Symantec). I switch the Windows Firewall off, but after rebooting, it appears selected again!.
This happens only with my brand new ThinkPad X301, which came with Vista. The package included a kit to convert to XP, but this installed a ‘naked’ XP, which required downloading from Lenovo and Windows about 1Gb of files (bad service, Lenovo guys!).
I wonder which “safety” issue of the X301 causes this, but how can I stop this happening? (It does not occur with any of my two old ThinkPads, also running XP SP-3 and Lenovo software).
Solved!
Go to Solution.

See -> http://www.vistax64.com/vista-networking-sharing/72537-file-printer-sharing-turned-off-reboot.html Here is the text. Re: File and Printer sharing turned off on reboot
I FOUND MY SOLUTION!!!
In my case, it was in Lenovo's "ThinkVantage Access Connections" applet. It
is additional security that is applied at the CONNECTION level.
Here is how I fixed it:
1. Double click on the ThinkVantage Access Connections applet in the
notification area.
2. Click on the MANAGE button on the toolbar
3. Select the SSID where you want File Sharing to work, and click EDIT
4. Click on the ADDITIONAL SETTINGS tab
5. Next to "Network Security", click the SETTINGS button
6. The first option in Security Settings is "Disable file and printer
sharing". UNCHECK this box. Click OK for 3 levels of dialog boxes, then
close Access Connections
Although these directions are specific to ThinkPad notebooks, the same
principle may apply for other manufacturers' connection managers.
Best of luck!

File and printer sharing for Microsoft Networks on Windows server 2008

Hi Expert,
I found that the properties of File and printer sharing for Microsoft Networks service disabled after I install the windows server 2008 64bits. I tried to install that service via adding the file and printer sharing services in the properties of local area connection, but it doesn't contain any service in the popup box. Also, no such service file available in the disk when I tried to install the service from installation disk of windows server 2008 64bits. Is the file "sacsrv.dll" corresponding to the service name of file and printer sharing? I found it is in the directory of "Windows\system32". I have no idea about where is the problem? Do I miss some components? Please tell me what can I do for it? Thanks!
Best Wishes,

Do any experts know the reason of this problem? Thanks!

Standard samrtforms and print program for Bill of Lading in delivery

Is there a standard smartform and print program for Bill of Lading for delivery?

Hi
Check this:
Print Program: RLE_DELNOTE.
Smartform: LE_SHP_DELNOTE.
Regards,
Vishwa.

Output determination and Printer determination for both PO and GR

Dear all,
Can anyone please help me in congiguring the output determination and printer determination for both PO and GR. please give me detailed configuration including the paths as i am stuck with the configuration.
Thanks & Warm Regards
Somashekar Anand

hi Somashekar
follow he steps
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Reward points if helpful
Thanks and regards
Ravikant Dewangan

Script to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks

Hi, I am trying to find a way of using a batch file or vbscript to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks on a Network Interface Controller.
I've done some searching on the internet and I can see some suggestions to locate the Setting ID of the NIC and then remove the value from the "Bind" string under "HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Linkage" and "HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Linkage"
I tried this but it didn't seem to uncheck itself from the NIC properties under NCPA.cpl
Can someone help me?

http://social.msdn.microsoft.com/Forums/vstudio/en-US/b0407073-07bc-462b-9de9-7295be5fa183/disable-file-and-printer-sharing-for-mircorosoft-networks?forum=csharpgeneral
¯\_(ツ)_/¯

How to uncheck File and Printer Sharing for Microsoft Networks by Command!!

Dear everybody,
I meet a problem with my System now, and I need your help!!!
As mentioned in title, I need uncheck on File and Printer Sharing for Microsoft Networks by Command for Security purpose.
Could you show me the way to do it by command line
I think GPO can solve this but My Boss want to do it by command line
Thanks for your help!!!

netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes
netsh advfirewall firewall set rule group="File and Printer Sharing" new enable=Yes
To disable these functions in Windows, use the same command and replace 'Yes' to 'No' in the above commands.

File and Printer Sharing for Microsoft Networks is missing

I have a Server 2012 Hyper-V VM that is missing the File and Printer Sharing for Microsoft Networks. When I try to Install the service it is not listed. The only service listed is Windows Network Virtualization Filter driver. I have the install media but
I don't know where the driver would be located. I'm hoping someone can tell me where it is located.
Update:
I am trying to run Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server but it's not working and it's giving me this error.
Enable-NetAdapterBinding : No matching MSFT_NetAdapterBindingSettingData objects found by CIM query for instances of
the ROOT/StandardCimv2/MSFT_NetAdapterBindingSettingData class on the CIM server: SELECT * FROM
MSFT_NetAdapterBindingSettingData WHERE ((Name LIKE 'Ethernet')) AND ((ComponentID LIKE 'ms[_]server')). Verify query
parameters and retry.
At line:1 char:1
+ Enable-NetAdapterBinding -Name Ethernet -ComponentID ms_server
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (MSFT_NetAdapterBindingSettingData:String) [Enable-NetAdapterBinding], C
   imJobException
    + FullyQualifiedErrorId : CmdletizationQuery_NotFound,Enable-NetAdapterBinding
Vincent Sprague

Ok, fixed it, I found the netserv.inf file in c:\windows\inf and tried to use it to reinstall File and Printer Sharing. However File and Printer Sharing was not listed. I copied the netserv.inf file from another Server 2012 VM and was able to install File
and Printer Sharing using the copied NetServ.inf. After rebooting the server I was able to access network shares on the server.
Vincent Sprague

Standard smartform and print program for sales document

HI All,
Is there a standard smartform and print program for sales document or sales order. If someone has worked with it do reply.

Hi Shashank,
What exactly you would like to print for Sales Orders in Smartforms..?
regards,
Ram.

Export settings to print images

Normally I export my images and then upload them to the web and thats it but today I needed to actually make some prints and I exported a 7 inch by 7 inch images and saved them onto a card then when to the local camera shop to print and what I found out was shocking. Apparently my images which I shoot RAW and export as JPEG were only the size of a thumbnail! When we looked at the properties of the images they were the size of a KB and the guy at the shop said they were too small to print. He said I might be able to get a 4x6 but not anything larger than that. He said they should be Megabytes!
So I just did exported out a test image and this time I set it to the original size and when I checked the properties of that one it was in fact large enough to be to be printed large and was in the megabytes.
So I would like to create a preset for when I want to print out images again. Some of the other settings I am not sure about and would like some assistance. As for DPI what should that be set at? Currently I have it set to 100 dpi. Should it be higher than that? I have seen some set to 72 dpi, would that signify low resolution? What about Gamma Adjust and Color Profile?
Again this is all new to me since I hardly ever print my images. Any help would be greatly appreciated.
Also I am planning on making some photo books for gifts and taking the images right out of my Aperture library. Is there anything special I need to do with setting that up? I have made calendars via iPhoto in years past and they turned out nice but with everything I found out today about printing my images I just want to make sure I am on point with everything before I send my images off to make the books.
Thanks a bunch!!!

I understand the math better now, but am still stuck on how to set the size using File>Export.
When exporting as a JPEG file, for example, I have the following options:
If I enter 5000 ppi in the Resolution field (or even 2400), I get an error that Illustrator can't export at that high a resolution. I tried opening the Illustrator files directly in Photoshop, but the images are distorted and unusable as they appear there.
I don't see any options to set the image size to 2000x2000 pixels upon export. Sorry if I am being obtuse--I feel I must be missing something very basic here!

How can I stop Acrobat from overriding a printer's draft settings and printing in photo quality?

Regardless of which settings I choose for my printer, Acrobat always prints in maximum quality.
The printer works as expected with every other application I have, from Photoshop, Word and Pages, to Preview and Mail. But when I print a PDF via Acrobat or Reader, the printer lays down so much ink that the paper sometimes comes out damp.
If it matters, the printer is an Epson Stylus Photo 1400, and I'm using Acrobat 8.2.6 and Reader 10.0.3 on a Mac Pro running OS 10.6.7.
To reiterate, every other app I use respects the Epson printer dialog settings when it comes to printing in economy mode. I've looked around in Acrobat's print settings and can find absolutely nothing along the lines of "print in draft quality." Am I the only person who doesn't want, or need, to burn up expensive printer cartridges unnecessarily?
This has been a problem since I bought the software, and it behaved the same way with my old printer (an Epson Stylus Photo 800). I don't need to print very many PDFs, but when I do, the printer wastes an enormous amount of ink.
I'm not looking for a workaround, I just want to be able to open a PDF in Acrobat or Reader, hit CMD-P, choose the economy print setting, and have it actually print in low resolution.
Being able to print a draft copy of a PDF seems to be a perfectly reasonable expectation when using software from the very company that developed the PDF standard in the first place.
Any help would be appreciated.

Understood. I've already checked for driver updates, and am already using the most current version. I really appreciate your trying to help, ... let's hope someone out there has some suggestions, too.
Cheers,
Francis
Francis Zera Photography: Seattle-based architectural and commercial photography + video production, world-wide service
Portfolio:   http://www.zeraphoto.com
ASMP:     http://www.asmpseattle.org/member/franciszera
Twitter:    http://www.twitter.com/zeraphoto
Office:     +206-659-ZERA
Mobile:    +206-335-0200
Mail:        PO Box 46078, Seattle, WA 98146

Export settings in QT Pro for putting video onto Internet

Hi,
I'm new to Quicktime and the video arena so could use some advice. I have a couple of questions.
1) What is the ideal codec setting for exporting AVI video when you want to put short clips on the WEB? I had thought it was H264 but I was experimenting with a 10 sec AVI clip (shot with a WEBCam in 320x240, 25fps, 49M) and found exporting to QT Movie using H264 (keeping size same etc) gave a 2.5M file and when hinted for streaming gave a 5M movie. When I exported to movie and streaming using MPEG4 codec both files were about 900K. My IE browser plays both the streamed and movie files as well; not very sure the difference between streaming and movie in this context??
2) I've just purchased a 30G (5G) iPod with FW 2.1. Ideally I wanted it to show video on TV, and was interested in the 640x480 support thinking this would scale better to TV screen. Haven't used the iPod yet but was checking other discussions on this forum and it seems its not that easy in QT to export video in H264 @ 640x480 for playback on iPod. People tend to advise the export for iPod option which is 320x240 instead. iPod states support for 640x480 in H264 @1.5Mbs and MP4 @ 2.5M so what is the problem?
QT 7.1.3 and iPod 30G (5G) Windows XP Pro

Hi JonnyB132,
Which formats have you tried? I would try H.264 first.
Thanks,
Kevin

BUG: Export DDL and Data fails for mixed case table/column names

Hi there,
I have found a bug in SQL Developer. See details below.
Description:
When "Export DDL and Data) function is used on a table/columns not named in UPPERCASE, sql generated by SQL Developer is invalid.
Steps to reproduce:
- open SQL Developer, connect to DB
- make a table named "lowerCase" (in double quotes, so it won't be automatically changed to capital letters)
- you may also add some columns, for example "lowerCol1", "UpCol2", ALLUPCOL3
- add some data rows to the table
- choose Tools -> Export DDL and Data
- check exporting of tables and data, on "filter" tabs choose your "lowerCase" table
- press "Apply"
Error:
Generated SQL contains invalid INSERTs: mixed-case table and columns are referenced without obligatory double quotes, which yields an error when generated script is executed (see below, relevant line is underlined)
-- DDL for Table lowerCase
CREATE TABLE "DBO_HT"."lowerCase"
(     "lowerCol1" VARCHAR2(100),
     "UpCol2" VARCHAR2(100),
     "ALLUPCOL3" VARCHAR2(100)
-- DATA FOR TABLE lowerCase
-- FILTER = none used
-- INSERTING into lowerCase
Insert into lowerCase (lowerCol1,UpCol2,ALLUPCOL3) values ('lc','uc','auc');
-- END DATA FOR TABLE lowerCase
Remarks
SQL Developer: version 1.2.1, build MAIN-32.13
Oracle DBs: 9.2 & Express
OS: Windows 2000 Professional
If you need any more details/testing, let me know. I'd really appreciate a quick patch for this issue...
Alternatively, do you know of any other simple way of copying a single database (it's called a schema in Oracle, right?) from one computer to another? Possibly something so simple like detaching->copying->reattaching mdf (data) files in SQL Server... I thought that this "Export DDL&Data" function will do, but as you can see I couldn't use it.
I just need a simple solution that works - one operation on source to stuff, get the resulting files to other computer and one operation to have it running there... I think that such scenario is very basic, yet I just can't achieve it and I am simply not allowed to spend more time on it (read: our test project fails, my company rejects my "lobbying" and stays with MSSQL :/ )
Thanks a lot & bye

Thanks for your reply.
ad. 1)
You're right. I just wanted to give some very short feedback on my experiences with SQL Developer, so I didn't think starting new threads would be necessary, but as I was writing it became much bigger than I initially planned - sorry about that. I will make proper threads as soon as possible. Having "Edit post" button on this forum would also be useful.
ad. 2)
Generally, you're right - in most cases it's true that "switching DBMS is a major commitment" and "you will produce terrible code" if you don't learn the new one.
However, I think that you miss one part of market here - the market that I think Express is also targeted on. I'd call it a "fire&forget databases" market; MySQL comes to mind as possibly most common solution here. It's the rather small systems, possibly web-accessed, whose data-throughput requirements are rather modest; the point is to store data at all, and not necesarily in fastest way, because given the amount of data that is used, even on low-end hardware it will work well enough. What's important here is its general ease of use - how easy is to set up such system, connect and access data, develop a software using it, how much maintenance is needed, how easy this maintenance is, how easy are the most common development tasks as creating a DB, moving a DB from test to production server etc. There, "how easy" directly translates to "how much time we need to set it up", which translates to "how much will the development will cost".
Considering the current technology, switching the DBMS in such systems is not necesarily a major commitment and believe me that you will not produce terrible code. In many cases it's as simple as changing a switch in your ORM toolkit: hibernate.dialect = Hibernate.Dialect.OracleDialect vs MySQLDialect vs MsSql2005Dialect
Therefore, in some part of market it's easy to switch DBMS, even on project-by-project basis. The reason to switch will appear when other DBMS makes life easier => development faster. From that point of view, I can understand my colleagues giving me an embarassing look and saying "come on, I won't read all these docs just to have db copied to test server". And it doesn't mean "they are not willing to learn anything new", it's just that they feel such basic task should have self-explaining solution that doesn't require mastering any special knowledge. And if they get such simple solutions somewhere else, it costs them nothing to change the hibernate dialect.
I think Oracle did the great job with introducing the Express to this "fire&forget" market. The installation is a snap, it just works out of the box, nothing serious to configure, opposite to what I remember from installing and working on Oracle 9 a few years ago. In some places it's still "you need to start SQL*Plus and enter this script", but it's definitely less than before. I also find the SQL Developer a great tool, it can do most of what we need to do with the DB, it's also much better and pleasant to use over Oracle 9 tools. Still, a few basic things still require too much hassle, and I'd say taking your schema to another machine is one of them. So I think that, if you do it well, the "schema copy wizard" you mentioned might be very helpful. If I was to give any general advice for Express line of DB/tools, I'd say "make things simple" - make it "a DB you can't see".
That's, IMHO, the way to attract more Express users.

Please help me with export settings and format

I'll try to explain my problem the best I can. I recently captured some footage from old VHS tapes to use in a Christmas video. I imported one of the MPGs that I captured to AE and applied a grain removal plus a couple other lighting effects to the video to improve the quality as well as I could. When I went to export it (through the render que) I found myself confronted with a huge amount of format options and after doing some reading online thought a Quicktime .MOV file with Photo JPEG compression would give me a reasonable size video but after doing the math (an a bit of the rendering) realized that my 2 hour video, that was originally only around 6GB was being converted into a .MOV file that was around 80GB, which is too large for my HDD. Now, I would love to go out and purchase a 1TB SSD right now but I can't currently afford it. I need to end up with a file as close to the original file size as possible but with the grain removed, and the highest quality (for the file size) and just need to know the best settings to use to accomplish that. I looked around for several hours and couldn't find a quick and easy answer like "just export a MPEG 2 file" with ..... settings. The file is going to be imported into Premiere for final edit with several others that are probably going to need the same adjustments. It will then be exported to a 1080p BluRay (with an HD photo slideshow). Also I am using Production Premium CS4, if that makes any difference.
Any quick tips about the grain removal effect would be greatly appreciated as well. I'm currently using a removal amount of .8 with the effect running 6 passes. I also changed the texture setting under "fine tuning" to .4. It's a little blury but MUCH better than grainy, and about as good as I can expect from a 25 year old VHS. If you've used this effect before and know a couple little tweaks I could apply to make the video a little sharper (without the grain) that would be amazing.
Thanks in advance.

The file size is defined by bitrate. The winners among production codecs regard to 'quality / render time / file size' ratio, DNxHD and ProRes, utilise almost identical bitrate: up to 440 Mbps while encoding with 4:4:4 colour subsampling and up to 220 Mbps while encoding to 4:2:2. Do some math, and you'll end up with 90-200 GB/hour.
So, the only option to save on disk space is to utilise highly compressed codec like H.264. With target bitrate set to 100 Mbps (you can set the bitrate in the Export Settings dialog) the quality loss might look affordable (don't remember if you can encode to Level 5 on CS4 though).
If you eventually choose H.264 (working with which on CS4 might in turn result in a nightmare), do not export to H.264 from AE directly. Export to H.264 via AME...

Export settings and printing advice for A0 sized poster

Similar Messages

Maybe you are looking for