Export Settings for DVD - Low Quality

Exporting several Adobe Premiere Pro CC sequences to later import into Sony DVD Architect Pro. I have been trying the DVD MPEG-2 Progressive Widescreen export and getting poor results. The footage in my sequences is a mix of Canon XA10 footage, Digital Juice and Video Hive footage and After Effects titles.
None of the sequences (now chapters) look crisp or they seem stretched on DVD playback. It might just be because it is SD instead of HD, but all my lower thirds from After Effects look really blurry with artifacts. Other titles look much better.
I've also tried
1. Pulling sequences into a new 720x480 timeline, clicking Sale to Frame Size then exporting to DVD MPEG-2 Progressive Widescreen.
2. Exporting sequences in AVI DV-NTSC Widescreen, then pulling into a new 720x480 timeline then exporting to DVD MPEG-2 Progressive Widescreen.
These tend to make the footage look smoother, but a bit blurry and After Effects lower thirds still look worse than anything else.
THANK YOU for any help!

I had seen someone else recommend blurring the whole footage a bit. I have way too many text objects to apply blur to all of them (lots of chapters with nested sequences with lots of After Effects animated lower thirds). If the client feels test is too oversharpened I can circle back and give it a try. My co-worke says she can't notice it at all so it may be me working on it at the computer makes it more noticeable.
I really hate to "dumb" down the master HD source project though because I need to make exports to other formats too like Windows Media where that blur is probably unnecessary. Obviously I could make a copy of the whole project or duplicate sequences, but there are so many ongoing edits I fear I'd wind up editing two project files.
Also, the font is part of the finalized visual identity scheme so I can't swap it out.
Thanks for all your help today. If anyone else has experience with Premiere Pro and Sony DVD Architect I'd love your tips and tricks too.

Similar Messages

Best Export Settings For Fast/Low-Res QuickTime Movies

I couldn't find a discussion room for FCP 7 so I figured if anybody is proficiant with FCP X, they could help me.
Hello,
I really could use some help with my export settings using FinalCut Pro 7. Most of my shows are no more than 20 minutes and I pretty much know the best QuickTime export settings for uploading to Vimeo, Exposure Room,YouTube...etc. But now I am trying export a lengthy project at 53 minutes.
The footage is mixed and some of it was not converted to ProRes but it plays great and renders fine in the timeline. The sequence settings were picked automatically at 1920x1080 because of the main footage that was brought in.
This upload is for client viewing purposes ONLY so I really don't care about the quality as much as the export speed. As far as what I’ve tried - I am using the H.264 codec. I tried lowering it to NTSC 720x480, then tried 1280x720 HD. I set the compressor lower than medium and the Kbps (?) settings to AUTOMATIC when I typically set it manually, between 3000 and 5000. My audio is set at AAC.
It’s a crappy project because of the way it was frankenstein’d together in the field (I’m just cutting it), but I'm committed now and have a huge deadline. I'm getting a bit nervous because of how many hours it’s taking to export. The client is going to make inevitablec hanges and will want to see those changes quickly again - online.
NOTE: My Compressor does not work and I’ve never needed to use so far so that option is not available.
I could really use could some wisdom today!
Thanks so much to whomever can steer me in the right path.
`Patrick
Message was edited by: prepstein

Try here
https://discussions.apple.com/community/professional_applications/final_cut_stud io

Best export settings for dvd

Im sure this question has been answered already but i dont see it anywhere. So what is the best export settings for getting the highest quality from my original footage for making dvd in encore? My original footage is recorded in AVCHD

>require this much memory
Just a comment to help with future communication... memory is RAM, file storage is on a hard disk
Glossary of Terms http://forums.adobe.com/message/2276441 to help w/communication
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input & output files (1)
(1) for faster input/output with 4 drives
- use drive 3 for all source files
- use drive 4 for all output files
(2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Drive C space http://forums.adobe.com/thread/1007934?tstart=0

Best Export Settings for DVD burning and Computer viewing

Hello,
I am trying to export a 1 hour video that I need to be compatible with standard DVD players as well as viewable on any computer.
Original footage was shot with a Canon 5d Mark ii in 24fps.
I have done all of my editing in Premiere Pro CS6. From there, I exported a high quality file to bring into Media Encoder (for trials of best output). My master file from Premiere was exported with the Preset MPEG2. The only thing I changed in the preset was VBR from 1 pass to 2 pass.. This gave me a 6.2 GB file.
I then brought that file into Media Encoder where I have tried the following presets:
MPEG2-DVD - Match Source Attributes
MPEG2-DVD - NTSC 23.976fps Widescreen High Quality
MPEG2 - HDTV 720p 23.976 High Quality
MPEG2 - NTSC DV High Quality
These settings have encountered various issues.. some have significant banding, but most importantly, none of them will play on my DVD player when I burn them to a disc.
The discs I am using are Sony DVD-RW with a 4.7GB capacity.
Where am I going wrong here? From what I've read, the format needs to be MPEG2 to be viewed on DVD... Sorry if I sound ignorant! This stuff is tricky..

First off, don't export your timeline and then take the result to AME to re-encode, this is compressing your video twice and degrading quality (not to mention takes extra time and hard drive space). Always export direct from Premiere to Media Encoder. If you must use an "intermediate" file as part of your workflow, perhaps to archive a completed video that might later be exported to other formats, then use a lossless codec such as UT or Lagarith (free downloads).
For DVDs, you MUST use "MPEG-2 DVD". Other forms of MPEG-2 are not appropriate, as the official DVD specification requires that the MPEG-2 file has certain attributes. Not recommended to use "Match Source" for ANY export, just choose an appropriate setting as needed.
This should be correct for your application - MPEG-2 DVD > NTSC 23.976fps Widescreen High Quality
If you want to encode a DVD file over 1 hour in length, then you will need to adjust the encoding bitrate so the resulting file will fit the disc. Rule of thumb is 560/minutes = bitrate, but you might round down the result a bit to allow for menu overhead and such, depending.
Once you export the "MPEG-2 DVD" file, you can NOT simply burn that file to DVD media. That is only creating a DATA disc and it will not be playable in a DVD player (though a computer or PS3/PS4 may work since they can play most media files). To make a DVD that works in all DVD players (and meets the spec), it MUST be "authored" in a program like Adobe Encore. This compiles your content and menus and all that and then writes the result to the disc in certain way so that DVD players can read the disc. If you open any DVD on your computer, you will see a folder called "VIDEO_TS" and inside that there are .vob files and others. That is a proper DVD. And once you have a proper DVD, you can't simply copy the VIDEO_TS to another disc (as DATA), you must tell the burning software to create as a "VIDEO DVD" and not DATA, or it again won't be readable in a DVD player. Very picky spec, sorry.
When using AME to export MPEG-2 DVD, it will create two files, audio and video (.m2v and .wav), you will then Import both of those into Encore together. Note that you CAN import other formats into Encore, such as .avi but Encore will then transcode that to the correct MPEG-2 format anyway, so best that you take charge and create the right media in the first place in AME before you get to Encore.
EDIT: In AME, any time that your source is higher resolution than the destination, such as HD to DVD, you can check the "Max Render Quality" button in AME to provide the best downscale quality.
EDIT 2: I see you're using DVD-RW media. That is fine for experimenting, but for delivery to clients always use good quality DVD-R or DVD+R media. DVD-RW may not have the best compatibility with players and costs more anyways. DVDs are so cheap now that I just proof to DVD-R and toss the bad ones, up to you.
Thanks
Jeff Pulera
Safe Harbor Computers

Export Settings for Optimum HD Quality

I'm getting back into editing after a couple of years away and having worked up until now with SD DV tapes. I now own a Sony HDR-SR10E Hi-Def camcorder, a brand new iMac with huge screen and more than enough memory/hard disk space, and a copy of FCE updated to work with AVCHD files. (Before the update, although I could preview the camcorder's files in the Log & Transfer window, for some reason FCE wouldn't actually import them when commanded, always giving me the dreaded Error; No Data message. Thankfully, the update fixed that. I work with the preset "AVCHD Apple Intermediate Codec 1920 x 1080i60")
I've just edited my first sequence; a three minute short, and ultimately intend to burn most of my movies to Blu-Ray. I monitor on the iMac, and whereas I used to monitor externally via DV deck and monitors, I've become used to this. My problem, I guess, is what are the ideal export settings to use to achieve a near loss-less movie at the other end of the editing process? "Export To Tape" is obviously redundant for me, so I'm left with "Quicktime Movie" or "Quicktime Conversion". The trouble is, nothing seems to give me the desired result. Plain old Quicktime Movie isn't good enough, leaving the exported movie looking under-resolved and full of horizontal artefacts, especially with moving objects featured. Neither can I find any presets/permutations within Quicktime Conversion that leave me with a half decent result; I'm basically left with files that are better or worse than each other depending on their varying degrees of artefacting!
I'm in the market for a quality external BD Burner and, probably, a copy of Toast Titanium 10 Pro, but there's no point in considering purchasing these until I can export good quality versions of the movies I edit in FCE. Can anybody please advise me as to the best export settings to use?
Thanks

FYI
To anyone interested in this thread, Tom's advice regarding export settings was good;
I exported as a QT movie. I then took a gamble, and bought Toast Titanium 10 Pro, and an LG BE08 external Blu-Ray rewriter, (although it doesn't officially support Mac), thinking that it's "plug-and-play" USB2 connectivity would be pretty universal. Luckily, it seems I was right. I burned the disc using Toast's Blu-Ray plug-in, and the HD playback quality on my PS3 is superb. To my eye it looks pretty much loss-less when compared to an HDMI feed straight from the camcorder to the TV.
The only niggle is that the disc shows up as an "Incompatible Disc" when I try to play it on my three-year-old Sharp Blu-Ray player, so be warned that the older machine may encounter problems!

Export settings for DVD authoring playing in Canada from Europe.

I have edited a wedding which is 720p in 50fps.
What should be done in order to author a DVD in Adobe Encore and sending it to Canada in order to play correctly in a DVD player there?
Should i edit in 720p, 50fps and export to 720p 30fps?
Please, i need some quick and correct answer!
thank you all, in advance

I have edited a wedding which is 720p in 50fps.
What should be done in order to author a DVD in Adobe Encore and sending it to Canada in order to play correctly in a DVD player there?
Should i edit in 720p, 50fps and export to 720p 30fps?
Please, i need some quick and correct answer!
thank you all, in advance

Premiere Pro CS3 HD Exporting Settings for YouTube??????

I am having trouble getting a crisp picure when I upload to Youtube, My picure quality looks great! when its exported but when I upload to YouTube its looks a lil pixelated when there is motion? www.youtube.com/gatorvision206 . Ive seen sooooooo many post saying do it this way..... do it that way.... What are the EXACT SETTINGS (Everything from FORMAT to BITRATE).
P.S.---------> filming in------> 1080p
Thanks
Gator.

Hello John,
I've seen all of that and some..... lol. That is why Im on Adobe forums now, cause I want to know the EXACT export Settings for a perfect quality 1080 HD picture.
thanks tho
GV

FCE export settings for higher quality video

Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
Douglas Eye
http://hundredmountain.com

The simplest way to produce good quality video for the internet is:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it.
Do not mess about altering audio settings, frame rates etc.
Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
Is that too big?
Message was edited by: Ian R. Brown

Imovie08 export settings for good quality

I'm using iMovie08 with my Canon HF100 but cannot find the best export settings for my MP4-files. The exported movie needs to run on my PS3 and my macbook. I want to export in 720p and 1080p format, using H.256 and ACC, but I'm not sure what bitrate to use for my movies to get acceptable quality. Tried using 5000k for 720p but that left me with lots of compression artifacts.
Any hints?

For 1080p try unlimited bitrate or a minimum of 16000.

Export settings for high quality, high resolution screen cast

I am trying to use iMovie for editing some software demo screen casts, and while my movie looks dandy in iMovie shown full screen, my final export looks like there is a lot of compression and antialiasing going on.
I am starting with a 1920X1080 screen capture via iShowU HD Pro, using Animation as the compression type. For final output I am using the Export using QuickTime option, and I have tried MPEG-4 at Best Quality, H.264 with Best Quality Compression and Multi-pass Encoding, and both look pretty bad. Anyone have any recommendations on the best export settings for a screen cast? Especially one that I would ultimately like to make available cross platform as well as via iTunes?
Thanks,
Gordon

I understand iMovie 6 won't compress the import. Everyone complained when apple changed away from iMovie 6 and but a link to download ILife6 (no cost) but they have since removed the link. I am looking for ILife 6 myself to get an uncompressed import if you find it please post so I can get it too, thx dan

Export settings for Dv Pal 25

My footage is 1920by1080 (1.0) ,25fps, upper, and im trying to export as 720by576,25fps,lower,Quality 100,DV25 Pal.
Im getting lineswhen exported as suspected, do i need to de-interlace footage on timeline before export and if so how do i do this?
Thanks
Philip

Its the requirement form the station im shooting news for tomorrow.
If you have Sony Ex3 1920×1080 (1.0) ,25fps, upper footage and someone requests DV25 PAL 25i 4:2:0 Lower Field First. 720×576 16:9 anamorphic.
What would you do?
When i export at these settings i keep ending up with intelaced footage with black lines across the image.
In fcp7 i could always fix this by de-interlacing footage by in cs6 i cant figure it out?

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Best PE7.0 export settings for Youtube HD, Vimeo or Smugmug?

Hi all,
I'm really new to video editing and I can't find any recommendations on the best Premiere Elements 7 export settings for Youtube HD, Vimeo or Smugmug. It seems like most of them want you to upload in 1280x720.
My original source is 1920x1080 30p AVCHD from a Canon HF100. Obviously, I would like to keep it at the same frame rate. There doesn't appear to be a preset in PE7 (or a way at all) to output 1280x720 30 into an MPEG container with H.264 encoding. When I go into the advanced properties of a preset like "H.264 1920x1080i 30" or "MPEG2 1920x1080i 30" and choose 1280x720, I no longer have an option for 29.97 fps - the only options are 23.976 or 24 fps. It seems bad to change this, right?
I see the preset for "HD 720p 30" which appears to be MPEG encoding of the video stream instead of H.264. This seemed to work OK, but I wasn't sure about it, because when I choose it I see in the description a line that says TV Standard: NTSC. A number of web sites indicate that H.264 is preferred, but I don't really understand why.
I also found a way to do H.264 in a Quicktime container. This seemed a little suboptimal because you can't do variable bitrate. When I unselected the "select bitrate" checkbox, it seemed like a quality of 50 yielded a .mov file with a bit rate of 2.87Mb/s, and a quality of 100 yielded a .mov file with a bit rate of 26Mb/s. It is confusing to me how the quality setting affects the bitrate on the quicktime containers.
I'm leaning towards using the "HD 720p 30" preset and working with the bit rate choices, but am open to comments. What do others think?
And on a related question - assuming we choose the "HD 720p 30" preset as a starting point, given the 1GB file restriction at Youtube, it seems to make sense to choose a bitrate that allows both good quality and reasonable file size. I don't know much about whether VBR 1 pass, 2 pass or CBR would be best for this kind of online HD video. Google is a little unhelpful here: http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=132461
This page (http://webvideotechniques.com/123/bigger-and-better-encoding-for-youtube-hd) seems to indicate aiming for a bitrate of 8Mbps with a minimum of 4Mbps, including 2 pass VBR.
So, basically, I'm confused and a little overwhelmed. I think I have solutions that work, but it's hard to tell. What does the greater community think? Thanks.

Thanks very much E Mann, that was a very helpful thread. I think it actually would apply for youtube as well. For other users, here's a direct link to the settings for Premiere Elements:
http://eugenia.gnomefiles.org/2007/12/08/exporting-with-adobe-premiere-in-720p/
Roughly, the answer is:
Quicktime container
Video codec: H.264
Quality: 80 (I used 100 and it just takes longer to encode)
Frame Rate: 29.97 (I guess if you are shooting in 24p, this might be different)
Bitrate: 5000 (I might try 8000)
Audio codec: AAC
Output channels: Stereo
Frequency: 48kHz
Now, my own personal changes to this recipe are:
Quality: 100 - takes longer to encode, no file size difference
Bitrate: 8000
Frequency: 44kHz (recommended by youtube)
One final note is that for Vimeo it appears you may have to try encoding in 29.97 or 23.97 and test to see which you like better. Apparently Vimeo caps fps at 24.
The nice thing about this is that you can get a quality video directly out of Premiere Elements and you don't have to pipe it through another program.

Best export settings for HD video playback on computer?

I have shot my video on 1080p witha DSLR and edited it in premiere pro. I exported the video in .mp4 format.
Now i imported the video in after effects and added loads of animation. I want to export it to the best quality for playback ON COMPUTER ONLY. Which is the best export settings for this purpose.
I rendered it in .avi and my 12 minute video had a size of 55GB after render and did not play smoothly in the computer.. PLEASE HELP WITH THE BEST SETTINGS for the above purpose.

You messed up. You should NOT have rendered MP4 out of Premiere to use in AE. You're adding compression and quality loss in between stages. BAD video person!
The easiest thing to do would be to import your Premiere project in AE. That way it can use the original footage too. If, for some reason, you can't do that, you should render a lossless file out of Premiere. Speaking of lossless files, that's what you rendered out of AE. This page explains your large AE file issue.
Anyway, take that large file you render out of AE into the Adobe Media Encoder and render out your final compressed file. Either H.264 or WMV should work well for playback.

FCE-HD export settings for slideshow

Hey dear specialists,
I need to have a help for the export settings for a slideshow
I am using FCE-HD 4.01 on either MacBookPro with Mountain Lion or on my old G5 with 10.6
Input are slides in JPEG with 15MByte Pixel.
As soon as I am using transition of a picture the result in export in all setting I can choose from FCE, which I found out is very bad, because picture has the interlacing effects at the borders
What can I change to get a good result
Thanks in advance for the feedbacks
Best regards
FJ
N.b.: screenshot abstract >>>> see right hand video lines

Hey Russ,
the video rate of the object does not change when I manipulate on the easy setting
If I import pictures, I do this directly from pircture folder into the BIN, and that should be independently from video input setting
The frame rate should also not be a problem for me here in Germany, because working directly from MAC to flatscreen
I put you a screenshot of the new sequence
The Mov output looks not that bad, even if one looks into detail see picture attached, the steps between one and next frame creates problems
I try also to send you the latest version of a slide transiltion example in iPhone quality ( this can not be attached ) it is a 2MB file. If you like I send you by email.
looks a bit improved vs the morning, but I do not feel confident.
What do you think?
Best regards and will come back tomorrow
FJ

Export Settings for DVD - Low Quality

Similar Messages

Maybe you are looking for