EXPORT SETTINGS FOR TWO-DAY SEMINAR- HELP

Does anyone know how the best export settings using compressor for a two-day training/seminar video? There's about 12hours total that need to be burned to DVD.

You're going to have to break this down to multiple DVD's. Everyone NEEDS a bathroom break about every 2 hours-- so it looks like 6 dvd's.
There is absolutely no reason to even try to put this on one disc.

Similar Messages

Ipod touch 4th gen. won't load to home screen. Stuck on apple logo for two days. Help?!

My ipod touch's battery died, so I plugged it in to charge. After awhile it turned on to where the apple logo shows up. After a day the logo was still on the screen with a loading sign there. It won't load to the home screen after 2 days. Help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Spilled diluted orange juice on my MacBook Pro now it won't switch on, but the battery indicator is lit up and won't go off. it's been like this for two days now HELP :,-(

I spilled diluted orange juice on my laptop, afterwards I switched it off to let it dry, switched it back on and it worked for about 10 mins then switched off and won't switch on again. The battery indicator on the side is constantly on. Please any advice would be extremely appreciated.

Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
https://www.techrestore.com/mac/
http://www.dttservice.com
http://www.myservice.com/macbookpro.html
http://www.ifixit.com/Device/MacBook_Pro
http://www.PowerbookMedic.com

HT4993 I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the mo

I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the moment???

Settings > General > Reset > Reset Network Settings

My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise

My iPhone is stuck in the recovery mode after downloading iOS7. i Tunes screen reads "Waiting for iPhone". It's been waiting for two days. Can anyone help?

My iPhone 4 is stuck in the recovery mode after downloading iOS7. iTunes screen reads "Waiting for iPhone". It's been waiting for two days. Can anyone help?

Hi Imw7996,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Judy

IPod 5th Gen doesn't find any WiFi signals after battery was dead for two days.

I recently bought an ipod 5th generation, it only has the selfie camera (no back camera).
My battery then ran out, and my iPod was dead for two days.
My iPod charging cable wasn't working, so i went out to buy a new one.
After charging it with the new cable, it would not connect to the internet.
My brother has a 4th generation ipod and his picks up and connects to the wifi signal we have here at home, but mine won't even pick up the signal, or any wifi signals period.
I looked around here on the Apple Support but found nothing that helped, I already reset my network settings.
Is there any way to fix this?

If not this
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

FCE export settings for higher quality video

Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
Douglas Eye
http://hundredmountain.com

The simplest way to produce good quality video for the internet is:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it.
Do not mess about altering audio settings, frame rates etc.
Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
Is that too big?
Message was edited by: Ian R. Brown

Firefox has been randomly crashing for two days. I always have google and facebook running. Firefox seems to crash at random times - no specific web page loading. My Firefox is up to date.

Firefox has been randomly crashing for two days. I always have google and facebook running. Firefox seems to crash at random times - no specific web page loading. My Firefox is up to date.

There can be multiple reasons for crashing. Seeing this article would be helpful as it lists out the solution for this-
http://support.mozilla.com/en-US/kb/Firefox%20crashes?s=firefox+crash&as=s#os=win&browser=fx4

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
Annalisa

Don't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Facebook is not working well on Firefox for two days now?

For two days now, Facebook is not working well on Firefox...all other web sites are fine, Facebook is not loading like it was, prior to yesterday, there were no problems. Facebook is working fine on Internet Explorer, but not on Firefox. What's up?

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences''' in the address bar and press enter.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences''' in the address bar and press enter
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Best export settings for video for web

Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Best Export Settings For Fast/Low-Res QuickTime Movies

I couldn't find a discussion room for FCP 7 so I figured if anybody is proficiant with FCP X, they could help me.
Hello,
I really could use some help with my export settings using FinalCut Pro 7. Most of my shows are no more than 20 minutes and I pretty much know the best QuickTime export settings for uploading to Vimeo, Exposure Room,YouTube...etc. But now I am trying export a lengthy project at 53 minutes.
The footage is mixed and some of it was not converted to ProRes but it plays great and renders fine in the timeline. The sequence settings were picked automatically at 1920x1080 because of the main footage that was brought in.
This upload is for client viewing purposes ONLY so I really don't care about the quality as much as the export speed. As far as what I’ve tried - I am using the H.264 codec. I tried lowering it to NTSC 720x480, then tried 1280x720 HD. I set the compressor lower than medium and the Kbps (?) settings to AUTOMATIC when I typically set it manually, between 3000 and 5000. My audio is set at AAC.
It’s a crappy project because of the way it was frankenstein’d together in the field (I’m just cutting it), but I'm committed now and have a huge deadline. I'm getting a bit nervous because of how many hours it’s taking to export. The client is going to make inevitablec hanges and will want to see those changes quickly again - online.
NOTE: My Compressor does not work and I’ve never needed to use so far so that option is not available.
I could really use could some wisdom today!
Thanks so much to whomever can steer me in the right path.
`Patrick
Message was edited by: prepstein

Try here
https://discussions.apple.com/community/professional_applications/final_cut_stud io

Best PE7.0 export settings for Youtube HD, Vimeo or Smugmug?

Hi all,
I'm really new to video editing and I can't find any recommendations on the best Premiere Elements 7 export settings for Youtube HD, Vimeo or Smugmug. It seems like most of them want you to upload in 1280x720.
My original source is 1920x1080 30p AVCHD from a Canon HF100. Obviously, I would like to keep it at the same frame rate. There doesn't appear to be a preset in PE7 (or a way at all) to output 1280x720 30 into an MPEG container with H.264 encoding. When I go into the advanced properties of a preset like "H.264 1920x1080i 30" or "MPEG2 1920x1080i 30" and choose 1280x720, I no longer have an option for 29.97 fps - the only options are 23.976 or 24 fps. It seems bad to change this, right?
I see the preset for "HD 720p 30" which appears to be MPEG encoding of the video stream instead of H.264. This seemed to work OK, but I wasn't sure about it, because when I choose it I see in the description a line that says TV Standard: NTSC. A number of web sites indicate that H.264 is preferred, but I don't really understand why.
I also found a way to do H.264 in a Quicktime container. This seemed a little suboptimal because you can't do variable bitrate. When I unselected the "select bitrate" checkbox, it seemed like a quality of 50 yielded a .mov file with a bit rate of 2.87Mb/s, and a quality of 100 yielded a .mov file with a bit rate of 26Mb/s. It is confusing to me how the quality setting affects the bitrate on the quicktime containers.
I'm leaning towards using the "HD 720p 30" preset and working with the bit rate choices, but am open to comments. What do others think?
And on a related question - assuming we choose the "HD 720p 30" preset as a starting point, given the 1GB file restriction at Youtube, it seems to make sense to choose a bitrate that allows both good quality and reasonable file size. I don't know much about whether VBR 1 pass, 2 pass or CBR would be best for this kind of online HD video. Google is a little unhelpful here: http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=132461
This page (http://webvideotechniques.com/123/bigger-and-better-encoding-for-youtube-hd) seems to indicate aiming for a bitrate of 8Mbps with a minimum of 4Mbps, including 2 pass VBR.
So, basically, I'm confused and a little overwhelmed. I think I have solutions that work, but it's hard to tell. What does the greater community think? Thanks.

Thanks very much E Mann, that was a very helpful thread. I think it actually would apply for youtube as well. For other users, here's a direct link to the settings for Premiere Elements:
http://eugenia.gnomefiles.org/2007/12/08/exporting-with-adobe-premiere-in-720p/
Roughly, the answer is:
Quicktime container
Video codec: H.264
Quality: 80 (I used 100 and it just takes longer to encode)
Frame Rate: 29.97 (I guess if you are shooting in 24p, this might be different)
Bitrate: 5000 (I might try 8000)
Audio codec: AAC
Output channels: Stereo
Frequency: 48kHz
Now, my own personal changes to this recipe are:
Quality: 100 - takes longer to encode, no file size difference
Bitrate: 8000
Frequency: 44kHz (recommended by youtube)
One final note is that for Vimeo it appears you may have to try encoding in 29.97 or 23.97 and test to see which you like better. Apparently Vimeo caps fps at 24.
The nice thing about this is that you can get a quality video directly out of Premiere Elements and you don't have to pipe it through another program.

Best export settings for HD video playback on computer?

I have shot my video on 1080p witha DSLR and edited it in premiere pro. I exported the video in .mp4 format.
Now i imported the video in after effects and added loads of animation. I want to export it to the best quality for playback ON COMPUTER ONLY. Which is the best export settings for this purpose.
I rendered it in .avi and my 12 minute video had a size of 55GB after render and did not play smoothly in the computer.. PLEASE HELP WITH THE BEST SETTINGS for the above purpose.

You messed up. You should NOT have rendered MP4 out of Premiere to use in AE. You're adding compression and quality loss in between stages. BAD video person!
The easiest thing to do would be to import your Premiere project in AE. That way it can use the original footage too. If, for some reason, you can't do that, you should render a lossless file out of Premiere. Speaking of lossless files, that's what you rendered out of AE. This page explains your large AE file issue.
Anyway, take that large file you render out of AE into the Adobe Media Encoder and render out your final compressed file. Either H.264 or WMV should work well for playback.

EXPORT SETTINGS FOR TWO-DAY SEMINAR- HELP

Similar Messages

Maybe you are looking for