Export setup for apple tv 3 1080p

hi, I have last version of aperture, I create my slideshow and I want export file in Itunes and watch movie with my apple tv 3, and I cant find correct setup, there is only for apple tv 720p, I try hd 1080 setup but file create is very large 35Gb, I try custum setup but is impossible found a compatible setup for apple tv!!!
I Imovie is possible and in aperture not?
I have only 2 solution, firsth, export file in 720p, second export file in hd1080, import file in imovie and with imovie create a file in 1080p for my apple tv3.
it is correct or there are another solutions?
thanks
mauro

The described problem is typical of a cable issue, however if you are sure you have looked into this properly, then it could well be a hardware problem.

Similar Messages

Optimal HD export settings for Apple TV

I've captured some video from my Canon HV20 and want to view it in the highest quality I can via my Apple TV. If I read the tech specs on the Apple TV it says "H.264 up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats"
But if I export as 1280x720 with AAC-LC (default, at up to 128kps), iTunes/Apple TV isn't happy with the result (ie. it won't transfer it to the Apple TV) saying it can't be played. If I say "Convert Selection for Apple TV" in iTunes I get a new 960x540 MPEG-4 video file which plays fine, but isn't as sharp on my HDTV as I would like.
So what's the magic to render a video that works on the Apple TV from FCEHD at the highest quality?
Thanks....

JFraser wrote:
Then what's the highest bitrate that's actually supported and how much bandwidth will the Apple TV hog from the network at that level?
as per the advertised specs.
Video formats supported
H.264 and protected H.264 (from iTunes Store): Up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
iTunes Store purchased video: 320 by 240 pixels, 640 by 480 pixels, 720 by 480 pixels (anamorphic), or high-definition 720p
MPEG-4: Up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution: 720 by 432 pixels at 30 fps) in .m4v, .mp4, and .mov file formats

Error -108 while exporting video for Apple TV

Anyone have a clue why I would be getting at error -108 in QuickTime Pro while converting an MPEG-4 file to Apple TV format? I was just doing File/Export and selecting "Movie to Apple TV" as the export format.
I'm using QT Pro on Vista. The full error message is "Error -108: An unknown error has occured." It came up (probably) at the very end of the export. (The export seemed to running fine, and it was past 50% when I left to go out for awhile. The error was up on the screen when I came back.) The source video is about 2.5 GB, and should be a fairly normal MPEG-4 video, 30fps, 720x480. The error message itself isn't very helpful, obviously.

sorry, are you sure?
when I bought my ATV I compared ATV1 and ATV2 and the video performances are the same, infact I play my video in 1280x720 with my ATV but it is convert with toast.
I compared the same video in ATV (720p) and in mpeg 2 (1920x1080 25 Mb/sec) with my medley 4geek and the quality is the same.
Sorry, am I sure about what ?
Apple TV 1 will only play 720p movies at 24 or 25 fps up to 5 Mbps or 960 x 540 at 30 fps, the Apple TV will play video at all frame rates at 720p and around about double the data rate.
Are you sure your camera produces mpeg2 files. If so you might not see an awful lot of difference between the original and the converted videos because h264 is significantly more efficient than mpeg2, although I'd expect you to see some. If your files from your camera are actually h264 wrapped in an mpeg2 container then I'd expect you to see more difference.
another problem, is impossible to create a video .mpe2(fullhd) with imovie, for that I bought ATV.
I don't fully understand what you are asking here.
why toast convert correct to ATV and apple software no?
Possibly because when you are using toast you are choosing a datarate that is compatible with the Apple TV (ie 5 Mbps or less), whereas if you are using (for example) quicktime preset for the Apple TV, you might be making files that are compatible with the Apple TV 2 but not the Apple TV 2, but it's difficult to say without knowing what settings you are using.

CS6 Export Settings for Apple Pro Res 422 HQ

My project is 1920 x 1080 (1.0) 23.976 fps, progressive and my special effects guy is asking for the project to be rendered out to Apple Pro Res 422 HQ. I can not find an export setting that offers 23.976 fps and is progressive. I have offered to give him an "XML" file but he is insistant. What can I do?

I believe you will only find this option on a Mac that has ProRes installed from some other application, like QuickTime Pro or Final Cut.

Speaker setup for Apple TV

I am interested in purchasing Apple TV to be able to play itunes and other music apps (spotify, iheart radio, pandora) thru my ipad to the TV speakers when my MacBook is turned off. Is this possible? The other capability I am looking for is multiple wireless speakers- one in the living room where the TV is, and one in the back bedroom. Is this possible and what kind of speakers would I need? TV surround sound speakers? Airplay speakers? I am not interested in Sonos due to the price tag.

Also, I have an Airport Extreme attached. I also have an Airport Express that I'm not currently using.

Exporting graphics for Apple iPhone / iPad

Hi, I'm putting together my first App for the iPhone and I have a question when it comes to exporting my graphics from Photoshop. I have looked all over the web place and I can't find a direct answer, I hoped that someone might have an idea in here?
My psd has the embedded colour profile - CHROMiX iPhone Aug08 as I have been advised to use from the web. From here all I want to do is export the graphic. I am exporting as a PNG-24. The exported graphic is either slightly washed out or much much darker. As this is my first time in doing it I don't know which is right, nor do I know why I am getting two different results.
My current colour settings is set to Europe General Purpose
The psd has been assigned the Chromix profile
When I export for web as a PNG, sRGB is NOT ticked.
Any ideas? Please! I am getting nowhere with this....

Appears to have been fixed in 7.7.5-0194 http://www.cisco.com/en/US/docs/security/wsa/wsa7.7.5/release_notes/WSA_7_7_5_194_Release_Notes.pdf
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCzv03132

Connecting iPod to two computers - not setup for Apple account ...

A co-worker bought an iPod classic and downloaded and installed iTunes on his desktop computer at home.
He did NOT create an iTunes account at the time. He just imported music off his hard drive and CDs and then sync'd his iPod. After that he started creating playlists.
Now he has a laptop that he wants to also connect the iPod too. He downloaded iTunes, connected the iPod, and it says it was sync'd to another computer and do you want to erase all the files off the iPod and sync it with iTunes on this computer. I told him to click on cancel.
The question is, how does he get it so both computers have the same account?
The easier one to modify would be the laptop. We can copy iTunes folder to somewhere else to back them up. Now how do we create a compatible account on the laptop so the iPod knows it is the same account? Does that make sense?
I did have him create an iTunes account and I would like to get both of his Windows computers set so that this is the account both computers see.
Thanks in advance for your help.

If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
Managing content manually on iPod
Syncing Music to iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7.3 or later installed hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Once you are connected you can change to manual as per the instructions above: iTunes - Keyboard Shortcuts for Windows

Quicktime Pro 1080p codec for apple tv?

Anyone know if there's a Quicktime Pro codec yet that will take original 1080p content (like home movies shot on a 1080p camera) and encode it to M4V for Apple TV at 1080p? I think the "Export to Apple TV" in QTP-7 still encodes to 1280x720 doesn't it?
Thanks!!

Although QTKirk has provided the most generic answer that should provide useable file, here are some additional details:
I think the "Export to Apple TV" in QTP-7 still encodes to 1280x720 doesn't it?
Unfortunately, this is true. The current TV preset creates files targeted for use on multiple TV models which limits the maximum resolution available.
Anyone know if there's a Quicktime Pro codec yet that will take original 1080p content (like home movies shot on a 1080p camera) and encode it to M4V for Apple TV at 1080p?
Unfortunately, the only QT 7 Pro option that allowed the creation of a 1080 H.264/AAC M4V file was the old "Movie to H.264" option which was replaced by the current mobile device specific presets. You can, of cource create a 1080 H.264/AAC MOV file using the "Movie to QuickTime Movie" method described by QTKirk or create a 1080 H.264/AAC MP4 file using the "Movie to MPEG-4" option and then either change the file extension manually (works with most apps that don't really check the file container type) or actually remux the data to a real M4V file container.
On the other hand, there are other, non-QT 7 Pro options available. I personally prefer the free HandBrake option here. It has separate presets for TV (720p24, 540p30), TV2 (720p30), and TV3 (1080p30) options available if you prefer that route or allows advanced customization to create your own preferred preset to directly create an anamorphic or non-anamorphic 1080p H.264/AAC M4V file. What you shpould actually be asking yourself here is not ifthe there is a work flow that can make your 1080 content but what are the actual goals of the work flow you want to use. For instance, are you saying "I want to create the best, highest quality 1080p non-anamorphic file I can and don't care how large the file is or how many hours it takes to make the conversion?" or are you saying "I will accept a high quality, anamorphic file that is playback efficient in terms of file space and streaming requirements and requires only a moderate investment in time for the conversion?" or something in-between?

Help exporting 16:9 optimized for apple tv

I am trying to export an SD anamorphic sequence optimized for apple tv. I have been going to File/ export/ use quicktime conversion/ apple tv, preset. But it exports it as 4:3 and the configure options are all grayed out. What is the best way to get my anamorphic footage to play anamorphically optimized for apple tv? I figured out that if I open the exported m4v in quicktime then go to window/show movie properties and then go to visual settings and change the aspect ratio and then re export in quicktime to the ipod preset it will stay in the 16:9 aspect ratio. Why is this? and what can i do to streamline the process?

Ok, I've been doing alot of digging and finally found a setup that's working great for me by following the instructions here:
The workflow described is for ripping DVD's, the OP is using home video (DV)
Second, is simply a container that specifies how the program handles that file correct?
Yes
You could theoretically simply rename an mp4 to m4v then, correct?
Maybe: Apple felt that .mp4 did not adequately describe the content of the container and introduced .m4a to denote an .mp4 container that contained only audio (AAC), .m4v follows on from that concept in that it is a .mp4 container that contains video as well (AVC)
I'm not sure but I think .m4v might be a .mp4 container that contains AVC video only (just to clarify- it can still contain audio, chapters etc, just not other video codecs). As such I can foresee possible problems if a .mp4 file is renamed .m4v, but for sure a .m4v' should be able to be renamed .mp4

Export for Apple TV

I've edited footage in FCE4 in separate projects from both AVCHD (Sony HDR-CX7) and HDV (Sony HVR-Z1U). In both cases footage is in a 16x9 format. When I export and set it for Apple Tv I get a squeezed picture that plays fine on Apple TV in both cases. I've tried exporting at various settings that result in a 16x9 movie but they won't sync with Apple TV. Help would be appreciated. (I've had great results with iMovie and recently moved up to FCE4)

Try exporting as a quicktime movie then convert to Apple TV with Quicktime.
BTW you should setup your forum profile to show your hardware and software versions.

I have created an extensive slideshow w/music on my MacBook Pro iPhoto. How do I export a slideshow so that I can burn a DVD from it? "Help" does not offer info for this request, only if you want to export to another Apple device. Help!!!

I have created a lengthy slideshow with music on my MacBook Pro under Iphoto. What steps do I need to take in order to burn a DVD copy of this slideshow? "Help" does not offer info for this transaction, only if you want to export to another Apple device and it shows that you must first export to Itunes. Can anyone help me with information on just copying to a DVD? I don't want to email it or show it on another Apple device. I want to be able to burn multiple copies on DVDs as a gift...... Can it be done? I'm not real computer savvy

Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start.

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks

Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

How do you folks setup your Apple Mouse also known as MightyMouse for iMac?

Any hints?..., tips?..., pointers?..., suggestions?..., ideas?..., alternative ways?... how you folks out there setup your Apple Mouse also known as Mighty Mouse for the 27 inch iMac 3.2GHz Intel Core i3 Trying to interpret the available documentation that turned up so far... not easy, information in the documentation could be better, more crystal clear ! Needed are more and better diagrams with better labels that better differentiate a variety of setups!

Go to Systems Preferences and click on the Mouse icon. You have a choice of how fast you want to track, scroll and the double click speed. It also gives you some choices of one-finger and two-finger operations. Change the settings (maybe one at a time) and see what best fits you. What I have my mouse setting on are comfortable for me; they might not be comfortable for you. Try changing the settings in Systems Preferences until you come up with a configuration that meets your needs.
There is a "mouse" chapter in the "Everything Mac" manual that came with the computer. It has more information on use, settings, etc.

HT4740 i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50

i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project but i dont know what im doing wrong

masterpieces wrote:
later moved the events and projects to the FCP events and projects folder .
Can you explain in detail what you did?
Do any other shsre destinations complete? If not, do you get the same error message?

Compressor 1080p for Apple Devices (10 Mbps) Does Not Include Dolby 5.1 Audio Track

Compressor recognised my file's audio properties as: AAC 5.1 (C L R Ls Rs LFE), 48.000 kHz
I use the 1080p for Apple Devices (10 Mbps) which should include Dobly 5.1 audio track
After the succesfful completion of any file the output file only includes a 2 channel audio track.

WIsh I could help and was hoping someone else would jump in with suggestions. The surround sound work I've done successfully is limited to the legacy versions of FCP and Compressor. When I've tested it in the FCPX to Compreessor workflow, I've not got it to work either.
I suggest you post your question in FCP X or Logic Pro forum to see whether you get some help.
Good luck.
Russ

Export setup for apple tv 3 1080p

Similar Messages

Maybe you are looking for