Export several Fuji X-Trans Files got "Not Enough Memory" Error

When I tried to export several (say 15) Fuji X-Trans files at the same time, I got a "Not Enough Memory" Error. This problem only occurred after after upgrading to Lightroom 4.4. I can now only export a few (3-5) X-Trans files at the same time. Does anyone encounter this problem and know how to fix it?
I am using Windows 7 32-bit with 4GB memory, SSD System drive, and Radeon 7700 Graphics card. For Virtual memory, I set "no paging file" on C drive and "system managed size" on another SSD drive.
Thanks in advance.
Wilson

One might expect an Export function is single-threaded so the number of files exported wouldn’t matter, but perhaps if you are very close to the limit, memory fragmentation comes into play, where LR is requiring contiguous blocks and there aren’t any big enough. It’s probably time to upgrade to a 64-bit Windows system and start getting used to the Metro interface which isn’t bad as long as your frequently-used programs have tiles on the first screen.
Go to Help / System Info… and see how much memory LR has available. On my 32-bit system with 4GB of RAM installed LR only has 716.8MB available which is typical for 32-bit Windows applications:
Built-in memory: 3327.0 MB
Real memory available to Lightroom: 716.8 MB
Real memory used by Lightroom: 160.5 MB (22.3%)
Virtual memory used by Lightroom: 160.8 MB
Memory cache size: 33.2 MB
You could change your VM settings to allocate a multi-gigabyte minimum pagefile size to see if it makes any difference, in case LR is waiting on the VMM to allocate more and then gives up, but I’d expect LR is requiring actual RAM for processing images, not VM which is much , much slower.

Similar Messages

I see message "Cannot open the file. Not enough memory to open the file"

When I'm trying to open file from adobe.com on my tablet, I see massage " Cannot open the file. Not enough memory to open the file" . I've got 10 gb free memory , so I dont know, why...

Which system are you running (is this information correct in your profile)?
Are there complicating issues to this question such as you transferring libraries between computers?
Have you upgraded iTunes recently?
Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311 - read section on Opening iTunes for information about running multiple copies of iTunes.

Not enough memory error when attempting export

Whenever I try exporting an 111Mb freehand file to a
pdf/gif/jpg/bmp/png I get a not enough memory error unless I set
the image quality to be very low. I am using Freehand MX 11.0.2 for
Windows. Does anyone know if there is asetting somewhere to prevent
this from happening?

> Whenever I try exporting an 111Mb freehand file to a
pdf/gif/jpg/bmp/png I get
> a not enough memory error unless I set the image quality
to be very low. I am
> using Freehand MX 11.0.2 for Windows. Does anyone know
if there is asetting
> somewhere to prevent this from happening?
Export and Import filters in FreeHand are not very good and
exporting large document as bitmap just can't be done. If you use
raster effects with high resolution export fails sooner or later or
at least takes even days.
To create a bitmap image I usually make pdf with Acrobat (the
only reliable way) and open it in Photoshop where you can define
dimensions, color space, etc. Photoshop opens some FreeHand created
eps and ai files too. Also Acrobat can export bitmap files.
Jukka

Could not open the file. Not enough memory

I have always used fireworks cs4 normally, but today, i experienced a bit of trouble. there is one png file that when i click to open it the fireworks loads but then a message pops up (could not open the file. Not enough memory) after a bit of researching, i found out that this error happens when i bring to stage one of the common libraries menu bars. (menu bar 4). Does anyone know how to fix this?
ps: I am able to open this file via file-open-*png. Please i really need help. Is the library corrupted maybe?

Hi,
It opened on mine (1.2Gb). I don't think it's a memory issue. I've used FWCS4 with 512mb RAM, never had such a problem. (of course it was very slow at the start, and i used to leave for a cup of coffee first and then come back when it was ready for work. That's why i upgraded to 1.2G .)
Import this menu bar from the common library, save it again as a png and then open it with fireworks the way you did, to see if the same error occurs.
Has this happened with other files as well?

A FIX for error message: When I try to open Snood (it's a game) I get this message. Not enough memory {Error # :: 0, in sound.cp@line 101 Can you help?

After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
with 4 GB of memory when opening Snood: Not enough memory {Error # :: 0, in sound.cp@line 101
My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
They thought the issue was in Mac's system preferences/ Sound. It was.
I didn't realize that my sound input and output devices were gone.
The fix was resetting the PRAM. I found this advice on MacFixIt.com.
MacFixIt help with volume: http://reviews.cnet.com/8301-13727_7-10415659-263.html
Resetting the PRAM is on Apple support: http://support.apple.com/kb/HT1379
My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
Thank you to Snood, MacFixIt and Apple.
Happy new year all!

Good work, nice post/tip, thanks!

Troubleshoot not enough memory error

I am getting a not enough memory error, and while there are tons of posts about this on the forums, I had some additional questions. First, I have two cRIOs, and think the error may have been thrown by one of them. Is this even possible though? I'm trying to narrow down which exe the error may be in. Second, does anyone have an order of steps they take when they get these errors in order to troubleshoot them?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.

Found the REAL problem! I was not reading my header correctly, this resulted in type casting the wrong bytes of data. Every now and then I would be type casting bytes of data that when type casted from a string to a I32 resulted in a number around 17 million. I am assuming the TCP read tries to malloc this memory (or new if its c++ ) and was unable to do so. That's why I got the not enough memory error. When I started reading my TCP bytes correctly, the error went away.
CLA, LabVIEW Versions 2010-2013

INTERNAL ERROR & NOT ENOUGH MEMORY error

Somehow 4 gig of memory is not enough!!
I am on Win Vista ultimate. intel Core 2 Duo 2.66 4 BG of
Ram.
And I'm working on a local hard drive with fat all else
running
I constantly get "Internal Error occurred...could not complete
request"
particularly alarming if that request was to save!!!!. I have
been using the 'fireworks autobackup" air app...save me heaps of
time...But its taking longer and longer to save the file as I work
on it.
If i save every 10 minutes !!!! its taking 1:20 to save..this
is 12% of my time...FW STILL sucks memory somehow..
any one with solution to this!!!???
Ive also had the "not enough memory" error a few times..In
which every thing done on the file is lost since last it was
opened...whether I saved it a million times or not. I've started
making copy backups and restarting FW every few hours to purge the
memory..but this sucks. This memory leak seemed to be mostly gone
in CS3 according to others so assumed CS4 had it sorted

One of our users is running across a similar issue using the
pen tool. A file that's 3000x2000 having sections cut out using the
pen tool will spike FW up to 2gig of used ram. Eventually the
Internal Error messages will start but, you can still trace your
path. The issue is it pops up every time you click a new point. The
only current work around I have for the user is to shrink the file
or decrease the dpi. Has anyone else run across this?
Specs
XP SP3
Core2 3.0ghz
4 gig ram.

P800 "Not Enough Memory" error when trying to use Contacts

Now even after I reset my P800 from iSync I get this 'Not enough memory' error when I try to use my contact list.
This is getting really frustrating! I want to downgrade...

I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
Phil

Not Enough Memory Error During Update

There is a new update for Ovi Maps 3.04 today. I tried to install it using the Software Update app and kept getting a not enough memory error. I even tried closing all programs, deleted a few apps I no longer use and restared my phone. Still I get the error.
Any suggestions?
<\
\>tuntman

Have a read of this thread as i suffered the same problem:
/t5/Maps-Navigation-and-GPS/E52-error-when-installing-ovimaps/m-p/751192#M27026

Building exe file fails (not enough memory) in LV 2011

Hello,
I have a project with about 900 VIs. I'm using Win7 32 Bit with 4 GB RAM (a 32 Bit OS can address about 3,3 GB) with LabVIEW 2011 SP1.
When trying to build an executable, I allways get the error "Not enough memory to complete the operation" (or something like that).
My RAM is full at this time.
Without building the exe file I can start the project without any problems and with only half RAM usage.
What can I do to generate the exe file with my system?
Are there any options I can set, that the application builder will not use so much memory?
Regards
Matthias

Hello
"how much memory do those 900+VIs take on disk????"
53 MB
"Ctrl+Run Button is a force compile for a single VI"
I used Ctrl + Shift + Run
I also tried the mass compilation tool itself and it doesn't change anything.
"If the source distribution also plows the memory, you want to split the distribution into several packages"
That sounds very coimplicated ...
Did I understand it correctly? I have to create several source distributions (option "directory" and not "llb"). And in my build specification for my exe file, I can chose these source distributions?
Do I need to prepare my VIs or can I directly create the source distribution with the option "remove block diagram"?
"I had that problem several times in a large project. I did a mass compile, saved all the VIs, then closed out of the project and LabVIEW. I opened up LabVIEW again and loaded only the main VI. I performed a build and it worked successfully."
I tried it and a still get the same error.
My customer need to get the update because it a critical one. And I can't build it.
An update to Win7 64 bit on my machine is also not a solution because all our customers use Win7 32 bit and the 64 bit executable won't run on a 32 bit operating system.
Regards
Matthias

Why "not enough memory" error when saving edited files?

I've been editing photos from one folder and saving them to another, hundreds of them. Suddenly when I tried to open Photoshop Elements 9 from the raw editor I got an error that says "could not complete the command because there is not enough memory." I have noticed that when I go back and open a photo from the first file that I've already edited, the changes are applied to that file, even though I saved the edited file into the second folder. What can I do? I don't really want the photos in the first folder edited, just the ones in the second, and I don't need to store all my changes in memory. I still have hundreds to edit.

Is there a simple way to get back to my original RAW files in folder 1, without the edits that have been made applied to them?
The simplest way is to change your mindset, and say ... hey, no problem, that's the way the PSE RAW editor works, I will leave things as they are.
What could be simpler, you basically have to do nothing?
(And by the way, I say again that your original RAWs have NOT been changed in any way).

Can't open large layered pdf files. Not enough memory

I have a large 300 M layered pdf file that when I attempt to open eventually pops up the "not enough memory (RAM) message.
I am on a windows XP Power Spec computer with 1.97 GB RAM I have allocated 1106 MB for memory useage, 12 history states and 8 cache level.
I have a 187 GB Seagate exterior harddrive as my main scratch disk and a mirrored main drive C with 154 GB of free space as my second scratch disk.
I also experience a canvas disapearance occasionally when using the polygonnal lasso tool. I can be clicking along and all of the sudden the image disapears until I click again. Annoying but not unworkable.
Any ideas?

I can open psd and other file formats of equal size but not pdf's. I switched the scratch discs around to see if that helped but still am getting the same issues

Lightroom 5 "not enough memory" error message

After using Lightroom 5 for several months I started to have the message "not enough memory" during the export action. It started to appear ones in a while, then it became more frequent and now it comes in every single photo exported.
I wonder if it is related to the library size as the only thing that changed in my computer since I started to use Lightroom is that I have increased the amount of pictures.
I run Lightroom out of my hard disk and I store the raw files as well as the modified jpg pictures in an external hard disk. Both have enough space and the core memory size has not changed since the beginning. I try not to run any other program at the same time.
I have seen that there are several discussions on this subject but it goes normally to increasing the size of the memory but it doesn’t explain why at the beginning the export was done very quickly and without problem and why the problem increased with the time (and with the size of the library°
Is there a way to manage the library size?

I have found a Work Around without changing or revamping my computer.
As I have noticed that the problem came slowly after several months of using Lightroom I suspected that there was something accumulating in the memory space needed for the program. From the left menu bar where I had all of the imported files, I deleted the folders that I'm not using currently; this action didn't erase the files in the hard drive but deleted them from the program's memory.
I noticed that now the program needs less memory space during normal use (developing) and when I do an export, the peak of memory usage that is needed for the operation does not reach the available memory space.

"There was not enough memory" error, DNG conversion.

I have CS4 and I like to convert my files to dng, however, I can't seem to do it on multiple raw files, because after fifty or so, I get the message, Incomplete because 'There was not enough memory.'
I originally thought this may have had something to do with Bridge and trying to save way too many files through acr in bridge, since bridge is a bit of a ram hog at times and has cache issues, so I tried using the Adobe DNG Converter standalone application, and the same thing happened.
I am trying to convert just over a thousand images, NEF, about 15M each. I have several hundred gigs of HD space, GeForce 8600GT video, 2G ram, WinXP SP2.
I track my actual memory usage and adobe dng converter has never used more than 6MB of memory.
Anyone know why I can't convert my files?

I want to try to reproduce this problem, a few questions...
Which version of the DNG converter did you use (the latest is 5.5)?
What camera produced the NEFs?
What NEF settings did you use, if any, compressed, uncompressed, 14-bit, etc.?
What DNG conversion settings did you use?
Did the NEFs already have settings (XMP sidecar files?). If you did have settings, what kind of settings, just basic adjustments, or did the settings also include localized corrections, spot heals, etc.?
Thanks,
David

"not enough memory" error when attempting to get some podcast episodes

I subscribe to several podcasts. All but one seem to be working perfectly. Here's the url of the one I'm having trouble with:
http://feeds.feedburner.com/KBCAudio
Here's the problem:
All episodes appear as they should. However, some of the episides WILL download when I select "Get" and some WILL NOT. Those that will not yield the following error message:
"There is a problem dowloading {episode name}. There is not enough memory available. Please check that the URL is correct and the connection to the network is active and try again."
Any ideas how to resolve this? I've tried:
1. Deleting old files.
2. Deleting and re-subscribing to the feed.
Is this a problem with iTunes or a problem with the feed?

I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
Phil

Export several Fuji X-Trans Files got "Not Enough Memory" Error

Similar Messages

Maybe you are looking for