Export / Share Settings

Good afternoon,
I seem to be having a problem with PE-8 outputting to a DVD that will fill the TV screen when viewed. I have a JVC-HC camcorder that creates MTS files that I import into PE-8 just fine and looks like it should fill the screen when previewing. The problem starts when I try to export it using the SHARE tab. I have several "projects" that I want to combine into one movie so I share them to the "Personal Computer", pick the MPEG setting, then set the Preset to "MPEG2 1920x1080i 30", name the file and pick the SAVE button. (I see the frame size is default set to 1920x1080 with no way to change it) When I export the movie file It looks reduced when I add it into the master combine file. If I SHARE directly to DVD I pick "NTS_Widescreen_Dolby DVD" allow it to burn the DVD, when played on my Blue-Ray / DVD payer it still only shows a small frame (about 17x22) on my 52" HD-TV.
What am I doing wrong?
Using PE-3 I never had this problem and only upgraded to 8 because of my new HD-Camera.
Thanks for any help.
Brian

I guess it's the new HD stuff that's messing me up. Here is the plan, make 5 short videos from 5 minutes to 15 minutes long, add each of the projects into a single video of about 40 minutes long the export the completed DVD with a soundtrack.
I filmed in the HD setting on the camcorder:
Type: MPEG Movie (creates a .MTS file type)
File Size: 36.0 MB
Image Size: 1920x1080
Pixel Depth:32
Frame Rate: 29.97
I started a new project in PRE-8 with the default settings of: (this may be the mistake)
Editing Mode: DV NTSC
Timebase: 29.97 frames/second
Frame Size: 720 Horiz, 480 Vert, 4:3
PIXEL Aspect: D1/DV NTSC (0.9091)
Fields: Lower field first
Display Format: 30fps Drop-Frame Timecode
Tile Safe Area: 20%, 20% Vert
Action Safe Area: 10%, 10% Vert
If this is where my error is, can it be reset on an existing project or will I have to start from scratch.
I completed the editing of the project and output to: PC settings MPEG2 1920x1080i 30-HD
File Type: MPEG2 Blu-ray
Frame Size: 1920x1080
Frame Rate: 29.97
I then imported the 5 files with the settings above into one "Master" project, applied the Soundtrack and exported the master project to: PC settings MPEG2 1920x1080i 30-HD
File Type: MPEG2 Blu-ray
Frame Size: 1920x1080
Frame Rate: 29.97
The original video when viewed from the camcorder fills the TV screen completely and looks great. Now I just need to re-learn how to setup PRE-8 for HD recordings and have them output correctly.
Thanks you very much for your quick response!
Brian

Similar Messages

Export "share" settings in APE7

Hi folks.
I'm having trouble with my video quality when exporting. I film with an HV30, capture using HDV Split, and have my project settings in APE7 as 1440x1080. When I open a file in Vision Lab Studio, it thinks the videos are 720x480. does anyone have an ideo why this is happening?
Thanks!

OK Steve, here's what I'm trying to do. I want to get really good quality videos for a You tube channel. I use Vision Lab Studio for my VFX.
I want the best quality. I have already shot several projects on my HV30 at HDV settings. The videos I capture with HDV Split (Because APE7 will not split them [HDV] by scenes - Using HDV Split is the solution to this problem after much research) are...
Codec: MPEG 1/2 Video (mpgv)
Resolution: 1440x1080
Frame rate: 59.940059
They are m2t files
Here's the problem. I cannot use these video clips in Vision Lab Studio because it does not support MPEG or m2t files (Actually the same thing, let's not get off track) Vision Lab wants .avi files. When you convert a 1440x1080 video to 720x480 you loose a lot of video quality. This is where the biggest degredation in my quality happens in my work flow when I import the clips into APE7 and use the available presets for .avi files (All "DV AVI" = a 720x480 video)
I'm fine with using an MPEG setting at 1440x1080 in APE7 for my final edit with sound, however the video quality of the clips I exported with VFX from Vision Lab already suck becaue they were downgraded from 1080 to 720.
I need a way to convert my 1440x1080 m2t files to 1440x1080 .avi files so I can retain video quality when doing VFX in Vision Lab. I'm trying to find a way to do this in APE7. If it's not possible then I need to find another way to do it. In the last hour I have been playing with the trial version of AVS Video Converter on the assumption that if it works I can just convert all the video clips I need for my projects that way, do VFX in Vision Lab, and then do my final edit with sound in APE7.
I hope this all makes sense.

Fotomagico export(share) settings for DVDSP

Can someone help me determine the best settings to use when exporting a slide show from Fotomagico to achieve the best video quality when importing as an asset to DVDSP? I will then need to render the asset in order to burn the DVD. What settings should I select for the rendering for watching the DVD on a 16:9 tv screen?
Thanks in advance,
Bernie

I'm in the same boat and looking for the best way to at least boost the quality that one would get going from Fotomagico > iDVD. My hope is FCS 2 (using compressor and DVDSP I can boost the overall quality of the whole presentation)
After spending some time over at Fotomagico's site I realize there is no way to avoid loss of quality if one is to burn a slide show to a DVD no matter what app. one uses or how careful one is while choosing HQ Export settings etc. As I understand it, it is the compression that takes place from the QT Export MPEG4 Movie > Streaming MPEG-2 for DVD conversion where most of the loss happens that gets under peoples skin with the simpler yet more limiting Fotomagico > iDVD route. My hope is to is to figure out a way to at least boost the quality up to a noticeable level with a HQ QT export from FM > DVDSP.
It seems so far iDVD is my largest limitation when putting a project together like this.
My research has also enlightened me to understand why iDVD and possibly other pro DVD authoring app's will never come close to a commercially released Hollywood studio DVD due to their extremely expensive and high end hardware and software encoders they use to prepare media and author DVD's. Can anyone summarize at least how close one can come to the commercial Hollywood DVD standard with FCS 2? Or at least tell me if the DVD's created with DVDSP fall somewhere noticeably above the DVD's created by iDVD (when of course, carefully following the best protocol when preparing the media).

Is there a way (or a plugin) to export develop settings into a readable file format?

For online educational/sharing purposes, I'd like to be able to export my LR develop settings into a readable text format so that if I share a before/after picture I can also include the LR develop settings that went into creating the after picture. I've looked for 2 days and I can't find a plug-in that will do this.

The List View plugin can export develop settings as a CSV file for Excel or HTML for a browser.
If you're technically minded and comfortable with scripting, it's straightforward to write a script that reads the settings from the XMP metadata stored in the .xmp sidecars (for raws) or in the XMP metadata section of JPEGs and TIFFs. Open a .xmp sidecar in your favorite text editor to get a flavor of how the develop settings are stored there.

Suitable share settings for movie playback

I have a MacBook Pro with dual core I7 2.66 Ghz processor and 8 GB of Ram. Operating system is OSX 10.7.5.
I processed my movie project using Final Cut Pro X. The project consists of a narrator with other media connected to the main storyline.
I had no problem processing the project. I imported optimal media and created proxy media for playback. Playback using the timeline browser works fine.
I just shared my movie using the default “Master File setting.” Playback using VLC player is halting for both video and audio, even when all other applications are closed.
The video is to be shown at a family gathering a few days from now.
1. I shot the video with a digital camera Panasonic DMZ F150 using the built in-microphone. FCPX decided it was a stereo project and I went along, but I am not sure that much is added by this stereo setting. If I were to change to “dual mono”, the only option that FCPX seems to give, would playback performance of the new movie improve? Would sound quality be much affected?
2. Another possibility would be to just show the movie from the timeline browser (full screen). Playback would be “proxy media quality”. Does this make sense?
3. Are there other share settings that might improve playback performance without affecting quality much?
4. Would using Compressor to create the movie help improve playback performance? If so, that would be a good reason to buy Compressor.
Any advice or guidance will be appreciated.

Thanks. After some experimenting, I found that export as Quicktime movie as H 263 seems to play on the G3 with good video quality.

Is there a way to export workspace settings?

The problem is, I work with a two-monitor setup. One is the actual working area with a painstakingly constructed layout of panels, the other one has a synchronized window with a full-screen Preview. Every once in a while I accidentally close the working area window, and because Bridge only saves a "current state" in workspaces, my painstakingly crafted window is just gone, poof (sound effect, not slang).
I know I can save a duplicate working space. That makes it somewhat easier, but I still have to delete the botched working space and create it again as a copy of the duplicate. This, coupled with the fact that the first stage of any troubleshooting on Bridge is to nuke all settings, makes me a bit uneasy with the solution.
I would be very grateful if someone knew of a way to export workspace settings so I could just load them back in when I mess up or Bridge does.

Would you mind disclosing the resolution of your 30" monitor in terms of pixels (so many pixels wide by so many pixels high) ? I'm just curious to see how such a large monitor compares to my two side-by-side 22" monitors.
Hallo mr de Gokker!
Nice to see you also here
The resolution I use with my 30 " is the default one and set to 2560 x 1600 pixels
If I can take a little 'gamble' I assume the total pixel amount of 2 x 22" will be more, but I never could get used on the two monitor set up. I just like my tools to be close to the image I work on, and using the pen tool with a lot of Brushing and switching to different layers and combine this with action pallet in button mode that needs also a lot of pressing it would be to often en to much distance to travel for my hand, but that's just personal.

Trying to export/share in a format readable by Powerpoint2010 when insert video

Using Premier 11 Elements...... I'm trying to export/ share videos to my computer, then trying to insert them into a Powerpoint slide. It works fine if I use a raw WMV format straight from the camera, but they need editting. I'm doing the editing enhancing sound etc in Premier11 Elements, but when I "share' I can't find how to save as a .wmv format??
When I choose Share>Computer> I end up with MP4 files or XMPSES files... all will not function when inserted into Powerpoint. I get a message "media unavailable" after pasted. Or sometimes the message "Powerpoint cannot insert" this file format.
How do I export as a .wmv?? the help info available says Premier 11 elements should do this!?
thanks for any help you can give, I'm new to this and under a time crunch for work.

Elizabeth B65
Thanks for the great news. Glad the suggestions worked for you.
If you want to take your Premiere Elements 11 Expert workspace Timeline to the 1920 x 1080 .wmv file for PowerPoint, the export from the following should insert into your PowerPoint 2010 nicely:
Publish+Share
Computer
Windows Media
with Presets = 720 x 480 16x9 29.97
Then under the Advanced Button/Video Tab, the essentials are:
Video codec = Windows Media Video 9
Encoding passes = Two
Bitrate Mode = Variable Unconstrained
Frame Width = 1920 pixels
Frame Height = 1080 pixels
Frame Rate = 29.97 frames per second
Pixel Aspect Ratio = Square Pixels (1.0)
The default "Average Video Bitrate" appears to be 1500 Kbps (kilobits per second). You can experiment with that later if necessary, finding the compromise between Bitrate, quality, and file size.
By the way, the installation of QuickTime is a requirement for working with Premiere Elements. The first sign of its absence is its presets missing from the Publish+Share/Computer/QuickTime. Typically the program requires being run Run As Administrator or from a User Account with Administrative Privileges.
Please let us know how else we might help.
Thanks.
ATR

I Use the last FCX but I have a prob when I export (share) to dvd the result is over 4GB for a single DVD is about 6 to 9 Gb for a short film of 1h so what can I do to fix this

I Use the last FCX but I have a prob when I export (share) to dvd the result is over 4GB for a single DVD is about 6 to 9 Gb for a short film of 1h so what can I do to fix this thnks

These "Share" files are accessed and used by the Create Disc app.
Create Disc is buried in the FCP X package.
Applications>FCP X>Show Package Contents>Contents>Plugins>Compressor>Compressor Kit.bundle>Show Package Contents>Embedded Apps>Create Disc
I'm wondering if having the Compressor Application on a Mac makes a difference to having just FCP X on a Mac and the use of the Sharing feature.
I have Compressor loaded and find that DVD and Bluray burns from Share without any glitches as some are experiencing.
Al

Exporting Bridge Settings on Network

Greetings fellow Bridge users, I would like to manage my visual assets through Bridge. I have created several image folders and added keywords to each image, all of which live on a network. I would like to export these settings so that my coworker can also search the same assets (on the network) on their computer, using the same keywords without having to tag them all over again on his computer. Seems like there should be some kind of settings I could export in order to do this. We are talking about 3,000 images so if I have to retag them then I'll have to look into a different solution to manage my library at work. Any help you may have to offer would be greatly appreciated. Thanks!

Bridge is just a file browser, by no means a robust DAM (digital asset manager). Its performance in a network environment is iffy.
Please see this very recent thread here:
Is there a stand alone version of Bridge and whats the cost per license?

Want to export user settings from Office 2007 on client, to be able to import in Office 2013?

Upgrading from Office 2007 to Office 2013. We may need to save the user settings on the client computer, because we are moving some of the systems from 32-bit to 64-bit. How can we export the settings to a folder?

Hi,
Could you please tell us what is included in user setting? Such as the customized Quick Access Toolbar settings, customize ribbon settings, or profile in Outlook?
Generally, we can’t upgrade operating system from 32-bit to 64-bit directly, we need to reinstall 64-bit operating system.
Office 2007 don’t provide the Import/Export button like Office 2010/Office 2013, we can’t export QAT setting and customize ribbon setting directly.
To customize an installation of Office 2013, you can use the Office Customization Tool (OCT) to perform tasks such as the following:
Specifying installation options
Customizing how Office applications and features are installed
Configuring default user settings
Managing additional content: add or remove files, registry entries or shortcuts
Configuring Outlook options: setting the default profile, adding email accounts, and specifying Exchange settings
For more detail information:
http://technet.microsoft.com/en-us/library/cc179097(v=office.15).aspx
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Issues in Installing Web AS - Java [ FSL-02077 File system export (share)]

I have installed ABAP Web As - 2004s on my laptop.
I want to intall JAVA Web AS as well. How ever, when I try to install the JAVA Web AS,
It is failing with the following Error:
FSL-02077 File system export (share) saploc does not exist.
it happens after I agree the licence, enter the right JDk version and enter the Permissions file.
I am running on XP Home Edition,
No Fire walls running
No Anti Virus software [ infact I uninstalled it]
No Ports are in use [as per Pre Reqs]
User has the Administrator access
Any insights ... Please ...

Hi Vivek:
<b>File system export (share) saploc does not exist</b>
Means that the share is missing, one of the pre-installation steps is create the installation folders and the shares...
folder sap (<drive>:\usr\sap) must be shared as <b>saploc</b> and sapmnt
Hope this help
Juan
Please reward with points if helpful

How to export/save settings for Authentication?

Hello all,
what is the best way to export/save settings for Authentication and 'core settings' of authentication using ssoadm?
I want to save all settings from:
(Top Level Realm) -> Authentication [ in web gui console].
Also all settings from 'All Core Settings'. Is there a way to do that from command line?
Thank you

Does the backed up copy of the iPhone's settings include the voicemail information? I'm wanting to do a "restore" on the iPhone, but want to find a way to keep the voicemails and not lose them

Why does my Mac share settings with other computers?

My macbook Pro shares settings like my google chrome settings and saved passwords on google chrome with my grandmothers computer. I feel bad because every time she goes to facebook or something I am signed in. We share her network at her house but only sometimes my main network is my house. Does anyone know why this happens and how I can fix it?

What is the exact problem? Is it that your current network does not support providing Internet access to more than one computer at a time? Regardless, what is the make & model of your network's router and modem? If your network has more than one router, what is the make & models of each of them and how are they configured?

QuickTime export/share fails to export video in Lion OS

I have a 9 gb .mov file (that I created and exported from FCP 7). I can open this file in QT, it opens & plays fine. I am however not able to create a compressed m4v version of this file from QT. I need to do this to enable a download of this movie onto my iPad, iPhone and stream through Apple TV, It creates an m4v file with no video but just audio. This problem happens with both the Export & Share options. And NO, I am not using the "Audio only" option. This was a simple task through Snow Leapord and I have done that several times. Not sure what to do, I am not able to get any help form Apple Support (I have a valid support extended warrenty). Can someone please help?

Thank you for the answer. The information was useful, the tone was not what I expected. When I asked whether more specific headings could be encouraged, I meant it out of sympathy for the moderators/answerers, not to incur their ire. Perhaps it would have been better if I'd left out the editorial comment.
I searched for 'audio', which I thought was a more technical term than 'sound'.
I read the indicated specs for QT above. The MPEG shortcoming is not laid out there clearly in any sense. MPG is not listed as an export format, so from that I would conclude QT can't export to MPEG1.
It is clear in the Apple article. For it to be 'clear' to anyone right away, it should be added in one sentence to the relevant help section of QT: 'QT will not export files with some codecs because of their proprietary neature.'
Or it should be in a pop-up message as soon as you try to export an mpg: 'Because mpeg is ownded by someone else, export will only render video'.
I believe I asked a valid question, and provided a specific account of my problem, so this post will be useful for future browsers.
Because VisualHub dealt easily with mpg, I thought QT must too. I was wrong.

Is there a way to export/share a project from 10.0.1 to Quicktime?

Any one else struggling with this? I think Mavericks seems good, early days though.

Cheers for that Matthew. Is there a way to do it(export/share project to QuickTime for rendering)
Or a similar function in the new iMovie?
Or could you direct me to a site with such details.
Much appreciated for any feedback. If I find anything I'll post a link here too.
Enjoy ya day

Export / Share Settings

Similar Messages

Maybe you are looking for