Export sharpening with JPEG's any different in 1.1?
I'm considering making the jump to Aperture and was wondering if one particular issue has been considered in the 1.1 update - JPEG export over-sharpening. Can anyone shed some light on whether Apple turned down the sharpening or if there is a way to control it on export now?
Thanks.
Anthony
I’m very disappointed to report that I see NO
improvement on JPEG export of RAW files in the1.1
version of Aperture.
I am still getting very pixilated jpeg images after
export from RAW, they are garbage and unusable. I
have changed my export setting presets to use the
highest quality (12) and exported at 100%, and turned
off all sharpening and noise reduction. Still the
exported JPEG’s look terrible. I’m using a Canon 5D
and working with ISO 100 files that are well exposed
and in perfect focus.
These pictures are not even worthy of emailing.
Does anyone have any suggestions or work-arounds they
have found? Is anyone getting good RAW exports to
JPEG?
OK, I think I was totally off base and owe Aperture an apology. I was posting one of the effected images to SmugMug when I noticed the photo looked fine in SmugMug, even at original size. This is the same photo that was very pixilated on my Macs monitor. I then emailed the same picture and looked at it on another computer, and again there was no problem with the photo. After checking a few other things it appears that the application Preview is enlarging my photos beyond actual size when I select actual size from the view options. Since the image is being enlarged by Preview beyond the actual size it is causing the pixilated problem. I’m not sure what’s causing this but every jpeg I open with Preview behaves the same way. I’m using a Quad G5 and a 30 inch Cinema Display.
Has anyone else experienced this issue? I just moved over to the Mac a few months ago so please excuse me if there is something obvious that I’m unaware of with this issue.
I am sorry for the false alarm.
Similar Messages
-
How to export rating with jpeg?
I would like to export my version as jpegs, with EXIF and IPTC data. No problem. I would also like the ratings to be exported with the picture. Maybe it is, but I cannot find it. Any idea if the rating is exported, and if it is, where?
Thanks,
AllanHello, Allan
Quote: "I would like to export my version as jpegs, with EXIF and IPTC data. No problem. I would also like the ratings to be exported with the picture. Maybe it is, but I cannot find it. Any idea if the rating is exported, and if it is, where?"
Allan, if you are exporting the jpegs using the Mail Export Presets make sure that the preferences are set correctly. Open Aperture's preferences, Command + , (comma) and select Edit Mail Export Presets and check Include Metadata.
Use the Query HUD to place the metadata you want baked into the image file. Command f
Click the plus sign at the upper right and choose Rating and set the ratings you want.
love & peace,
victor -
After registering any XML Schema export fails with ORA-24324. any suggestions?
Platform is Windows 2000, db characters: UTF-8
exp system/manager@syzxml owner=(syzem) file=a.dmpExport: Release 9.2.0.4.0 - Production on Sun Nov 23 09:52:13 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
Export done in EE8MSWIN1250 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SYZEM
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SYZEM
About to export SYZEM's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
EXP-00056: ORACLE error 24324 encountered
ORA-24324: service handle not initialized
EXP-00056: ORACLE error 24324 encountered
ORA-24324: service handle not initialized
EXP-00000: Export terminated unsuccessfully
v$version:
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
PL/SQL Release 9.2.0.4.0 - Production
CORE 9.2.0.3.0 Production
TNS for 32-bit Windows: Version 9.2.0.4.0 - Production
NLSRTL Version 9.2.0.4.0 - Production
dba_registry:
COMP_NAME STATUS
VERSION
Oracle9i Catalog Views VALID
9.2.0.4.0
Oracle9i Packages and Types VALID
9.2.0.4.0
Oracle Workspace Manager VALID
9.2.0.1.0
Oracle XML Database VALID
9.2.0.4.0
nls_session_parameters:
PARAMETER VALUE
NLS_CALENDAR GREGORIAN
NLS_COMP BINARY
NLS_CURRENCY z│
NLS_DATE_FORMAT RR/MM/DD
NLS_DATE_LANGUAGE POLISH
NLS_DUAL_CURRENCY z│
NLS_ISO_CURRENCY POLAND
NLS_LANGUAGE POLISH
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NUMERIC_CHARACTERS .,
PARAMETER VALUE
NLS_SORT POLISH
NLS_TERRITORY POLAND
NLS_TIME_FORMAT HH24:MI:SSXFF
NLS_TIMESTAMP_FORMAT RR/MM/DD HH24:MI:SSXFF
NLS_TIMESTAMP_TZ_FORMAT RR/MM/DD HH24:MI:SSXFF TZR
NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZRTry use export utility version 9.0.1.1.1 or
store XMLType as CLOB. -
Exporting from a 2D line graph with .jpeg extension
Is there any way to export from an ordinary 2D line graph with .jpeg extension so that with using this image i will improve my result of exporting excel.
e.g. i have found and example and added a button as you will see when you run this code.I will click this button and it will export this line graph with extension .jpeg so that i will see it as an ordinary image at my home directory.
Thanks for any helpful comment
Regars,
Serhat
* To change this template, choose Tools | Templates
* and open the template in the editor.
* @author led1433
import java.awt.*;
import java.awt.font.*;
import java.awt.geom.*;
import javax.swing.*;
public class LineGraph
public static void main(String[] args)
int x1 = 1000,y1 = 0;
JFrame f = new JFrame();
JButton exportToJPegButton = new JButton("EXPORT WITH JPEG");
exportToJPegButton.setToolTipText("Exports Graph with extension *jpeg");
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
exportToJPegButton.setSize(200,25);
f.add(exportToJPegButton).setLocation(x1, y1);
f.getContentPane().add(new GraphPanel());
f.setSize(400,400);
f.setLocation(200,200);
f.setVisible(true);
class GraphPanel extends JPanel
final int
HPAD = 60,
VPAD = 40;
int[] data;
Font font;
public GraphPanel()
data = new int[] {
120, 190, 211, 75, 30, 290, 182, 65, 85, 120, 100, 101
font = new Font("lucida sans regular", Font.PLAIN, 16);
setBackground(Color.white);
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
g2.setFont(font);
FontRenderContext frc = g2.getFontRenderContext();
int w = getWidth();
int h = getHeight();
// scales
float xInc = (w - HPAD - VPAD) / 11f;
float yInc = (h - 2*VPAD) / 10f;
int[] dataVals = getDataVals();
float yScale = dataVals[2] / 10f;
// ordinate
g2.draw(new Line2D.Double(HPAD, VPAD, HPAD, h - VPAD));
// tic marks
float x1 = HPAD, y1 = VPAD, x2 = HPAD - 3, y2;
for(int j = 0; j < 10; j++)
g2.draw(new Line2D.Double(x1, y1, x2, y1));
y1 += yInc;
// labels
String text; LineMetrics lm;
float xs, ys, textWidth, height;
for(int j = 0; j <= 10; j++)
text = String.valueOf(dataVals[1] - (int)(j * yScale));
textWidth = (float)font.getStringBounds(text, frc).getWidth();
lm = font.getLineMetrics(text, frc);
height = lm.getAscent();
xs = HPAD - textWidth - 7;
ys = VPAD + (j * yInc) + height/2;
g2.drawString(text, xs, ys);
// abcissa
g2.draw(new Line2D.Double(HPAD, h - VPAD, w - VPAD, h - VPAD));
// tic marks
x1 = HPAD; y1 = h - VPAD; y2 = y1 + 3;
for(int j = 0; j < 12; j++)
g2.draw(new Line2D.Double(x1, y1, x1, y2));
x1 += xInc;
// labels
ys = h - VPAD;
for(int j = 0; j < 12; j++)
text = String.valueOf(j + 1);
textWidth = (float)font.getStringBounds(text, frc).getWidth();
lm = font.getLineMetrics(text, frc);
height = lm.getHeight();
xs = HPAD + j * xInc - textWidth/2;
g2.drawString(text, xs, ys + height);
// plot data
x1 = HPAD;
yScale = (float)(h - 2*VPAD) / dataVals[2];
for(int j = 0; j < data.length; j++)
y1 = VPAD + (h - 2*VPAD) - (data[j] - dataVals[0]) * yScale;
if(j > 0)
g2.draw(new Line2D.Double(x1, y1, x2, y2));
x2 = x1;
y2 = y1;
x1 += xInc;
private int[] getDataVals()
int max = Integer.MIN_VALUE;
int min = Integer.MAX_VALUE;
for(int j = 0; j < data.length; j++)
if(data[j] < min)
min = data[j];
if(data[j] > max)
max = data[j];
int span = max - min;
return new int[] { min, max, span };
}GraphPanel stays the same.
public class JpegExport {
public static void main(String[] args) {
final GraphPanel graphPanel = new GraphPanel();
JButton exportToJPegButton = new JButton("EXPORT WITH JPEG");
exportToJPegButton.setToolTipText("Exports Graph with extension *jpeg");
exportToJPegButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
exportToJpeg(graphPanel);
JFrame f = new JFrame();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(exportToJPegButton, BorderLayout.NORTH);
f.getContentPane().add(graphPanel, BorderLayout.CENTER);
f.setSize(400, 400);
f.setLocationRelativeTo(null);
f.setVisible(true);
private static void exportToJpeg(GraphPanel graphPanel) {
try {
int w = graphPanel.getWidth();
int h = graphPanel.getHeight();
BufferedImage image = new BufferedImage(w, h, BufferedImage.TYPE_INT_RGB);
Graphics2D g2 = image.createGraphics();
graphPanel.paint(g2);
g2.dispose();
ImageIO.write(image, "jpeg", new File("export.jpg"));
} catch (IOException e) {
e.printStackTrace();
} -
I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?
Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.
-
Perform Client import/export SCC8 with different release component between server
Dear All
Isn't possible to perform Client import/export SCC8 with different release component between server.?
Currently the condition of between two system as follows
Source Server : SAP ECC6.0, Component SAP_APPL, release 602 level 16
Target Server : SAP ECC6.0, Component SAP_APPL, release 600 level 24.
This problem happens due we was unable to downgrade the release and patch the latest support pack of SAP_APPL reelease 600.
Thank You, your help is much appreciated.No..
-
Is any different between ECC 5.0 and ECC 6.0 for Excel export?
Dear all,
As you know, most standard SAP report allow Excel export. I just wonder is any different between ECC 5.0 and ECC 6.0 for excel report in standard SAP reports?
In ECC 5.0, Reports in profit center accounting, LIS, or PA, etc. has their own different way to export to excel and is any improvement in ECC 6.0? I Thanks.In ECC 5.0, a lot of reports don't have Excel export function instead user has to go to system -> List -> Save -> Local file -> spreadsheet.
I just wonder is any improvement in ECC 6.0? just like LIS report, user can select export -> Transfer XXL to either pivot table or just plain excel but the function only exist in certain reports in some modules and not all.
Thanks again. -
I'm surprised that Aperture does not allow sharpening of jpeg output. Sharpening the master before reduction is not the same. All experienced image makers know that sharpening needs to be applied after resizing. I don't want to sharpen my master. I always sharpen for output (I've always used photoshop). How could Apple leave this feature out?
My understanding was that nothing actually happened to the files ("nondestructive") until they were exported...at which time the adjustments were applied. You were simply seeing a preview of the adjustments.
I'm not a programmer so I could be completely wrong and if so, I completely agree that the sharpening should be applied as the final step. -
This is an example of my problem. This icon is the sole object in this document, and is the only thing being exported here. Yet when I do export it, a random bar of white space is exported along with it. I am currently using Illustrator to design the art for a video game, meaning that this empty space plays havoc with my end product, and I have to meticulously crop anything I export. Since I do have to make hundreds of individual sprites for this, I would love to learn how to fix this problem and save myself a lot of time. So, what exactly am I doing wrong here, and how can I fix it?
quicklite,
I believe the resulting/final size may extend just a tiny bit above a whole point/pixel (value) on the pixel grid.
You may see by Edit>Preferences>General>Use Preview Bounds (if needed), then select one of the top Reference Points in the Transform palette and look at the Y value measured in points/pixels.
If that is the case, the solution would be to get rid of that tiny bit. -
Demosaicing intro'd w/ LR3.2 Sharpening with 7D. Help requested.
All,
I hate pixel peeping, but none the less it appears that there is demosaicing being introduced in the new sharpening methods that I am not seeing in Canon DPP or for that matter CS3 USM, or Smart Sharpen. Images follow, and I can supply the original RAW file if required. If I am doing this comparison incorrectly, I'm open to any comments and corrections. All images are 100% center crop of a 7D image. No adjustments to exposure, clarity, etc. ISO 200 image, Canon 7D, Canon 70-200 2.8 IS
Image One: No image sharpening applied out of LR - Note the area of the two thin white sleeve stripes on player's left arm below patch - Smooth going around front toward back
Image Two: Above image but overcooked with USM - Same are still smooth
Image Three: Original RAW file processed with Canon DPP and Sharpening pushed to almost max. - Still Smooth
Image Four: RAW image processed in LR with Amt 40, Radius 0.8, Detail 25, Masking 20 - Note the demosaicing (stairsteppng) in that area. Also appears in the folds about the patch
Image Five: The above JPEG brought into CS3 with minimum Smart Sharpening applied - worsens condition (as expected)
Image Six: Image #4 brought into CS3 and minimal USM applied - worsens condition (as expected)
As I'm adding the images, I'm not sure the difference between the first three images and the last three are as stark as they are on my 24" Dell Ultrasharp, but I assure you they are there. I've tried lower amounts of sharpening out of LR, but the demosaicing is still created.
Any thoughts, different ways to approach, etc., are appreciated.
Jay S.JayS In CT wrote:
Keith,
Got it.. so after repost, come prepared with a bullet proof vest. :-)
Jay S.
Keith_Reeder wrote:
JayS In CT wrote:
Dorin,
Could possibly be. I'm going to have to go back and figure out why I can't quite get it represented here and repost.
The usual trick is a 200% zoom - or more - crop, followed by a thorough lambasting for extreme, "what does that have to do with the Real World?" pixel-peeping!
Keith, Dorin, (and all),
Hopefully this shows what I was trying to illustrate. 200% on three images that are 100% crop of original. I did a screen grab of my 24" 1920x1200 Dell Ultrasharp. The lower right is converted JPEG from original RAW file in LR with no sharpening at all. Top right is DPP pushed all the way to the right on sharpening, upper left is LR sharpening with the setting listed above the image. Look at the area on the Jeter's left arm with the two white stripes under the patch, and the folds in the sleeve above the patch.
The point I was trying to make is that LR sharpening is introducing the stair step pattern you see. It isn't there with DPP (or very minimal) nor with the JPEG image not sharpened coming out of LR.
Jay S. -
Anyone else having trouble opening CMYK PDFs from Photoshop CC with JPEG 'high' compression?
(Cross-post from the Photoshop forum, where I was asked to post in the Acrobat forum: http://forums.adobe.com/message/5553829 )
When I save a PDF file in Photoshop CC in CMYK color with JPEG compression (quality = high), it will save without any errors. However, when I open the file in Acrobat (11.0.3), I get an "Out of Memory" pop up error. I press Ok, and the document is just displayed as a blank white image.
I'm using Win7 64-bit, Photoshop CC 64-bit. Plenty of memory (24GB) and allocated RAM in preferences, and I've done some troubleshooting that leads me to believe the error is not due to system memory, but rather a specific bug in the software. I have Photoshop CS6 on the same machine, and if I open the PSD, save as PDF with the above settings, everything is fine when I open it using Acrobat. This seems to just be for Photoshop CC, not CS6.
Here is the troubleshooting I've done so far:
PDF format, RGB color, any other settings --> Acrobat can open the file.
PDF format, CMYK, no compression --> Acrobat can open the file.
PDF format, CMYK, JPEG compression [medium] --> Acrobat can open the file.
PDF format, CMYK, JPEG compression [high] --> Acrobat can NOT open the file because it encounters the "out of memory" error.
PDF format, CMYK, JPEG compression [maximum] --> Acrobat can open the file.
This is silly. I don't get it. Can anyone else confirm this problem for me?
Updated:
Like you said, there isn't enough information to rule out an issue with Photoshop CC, as the same action using Photoshop CS6 results in a usable file.
New information (while making files for uploading):
The error only occurs with CMYK files of larger dimensions. On a 500x500px image, Acrobat throws out "A drawing error has occured". a 2500x2500px image runs into the "Out of memory" error. In either case, Acrobat cannot successfully open the file generated by Photoshop CC, while it can if it was made using Photoshop CS6.
RGB PDF JPEG HIGH - PsCC - No Error.pdf
https://drive.google.com/uc?export=&confirm=no_antivirus&id=0B9lLW1Ml0 0iQc2ltUXhqVTRVaWs
CMYK PDF JPEG HIGH - 500x500px - PsCC - Acrobat drawing error.pdf
https://drive.google.com/uc?export=&confirm=no_antivirus&id=0B9lLW1Ml0 0iQZ3M2SS1PbEJuN0k
CMYK PDF JPEG HIGH - 2500x2500px - PsCC - Acrobat out of memory error.pdf
https://drive.google.com/uc?export=&confirm=no_antivirus&id=0B9lLW1Ml0 0iQd2dxWm9xWjk3bEEAnother observation for what it is worth (not a solution again). I was able to open all 3 PDFs in Irfanview as graphics. The properties of the image were
The major changes for the others within the JPegs was the number of pixels (133X133) and the size (1.4inX1.4in). There is also a reduction in the number of colors.
Just for information, I opened the big JPeg in Acrobat (9.5.5) and it opened fine. However, it looks like the color space was changed as shown below:
Even if I change the input to use CMYK and not RGB, it looks like it gets converted to RGB. I haven't spent time to figure out the preflight analysis properly, but at least this may give you some info back. -
Error "Failed to Export PDF" with big image on CS6 (32) and CC (64)
Hi everyone,
I'm on indesign CS6 (v8.0.2) and when I try to export pdf with a very big image ( *.tiff, 25000*35000 pixels, ) , the action failed with this message :" Failed to export a PDF".
To be sure that there is no any corrupted elements, I made a very simple layout (one page , and just one element for my image,I turnoff prefilgth and all ressource intensive options, and export with no downsampling or resampling) and try to export with different size image:with 20000*30000 -or smaller -image the export works, always failed with image .The export failed to in scripting mode.
If I diveded my image in four , the export works but this solution is not convenient (I actually made tests for a fully automatised process, and we want to be sure that the indesign component is enough "safe")
I try the same action with an evaluation version of indesign CC 64 bits (v9.2) and have the same behavior.
I can imagine that there is a memory issue there, but my config seems to be strong ( windows server 64 with 16GB ram, DD with more than 100GB free). I don't undersant why-in a "full" 64 bit environnement- it is not possible to manipulate and export very large image ?
I'm wonder If the background task is a part of the problem, and if it 's possible to disable it in CS6 or CC as in cs5 ( creates an “DisableAsyncExports.txt” file in Adobe InDesign executable directoty don't seems to disable it in CC or CS6).
Thank you for your help and good ideas..
DC.this is a .tif (not a "big"tiff) compressed in LZW or ZIP.
I just tried with another format (png), the error is the same... -
How to set "embed icc Profile" option to export document as JPEG
Hi All,
While exporting the document as jpeg, through File->Export, there is an option "Embed ICC Profile" as figure shows.
How to set it if I am exporting the document through my program in which I rasterize the document and used
the sAIImage->AsJPEG(raster, jpegDataFilter, params);
I didn't find any option in AIRasterizeSettings or AIImageOptJPEGParams to set this flag.
plz anyone suggest me how to do so.
Thanks,
Rud.thanks for you through out help.
I use the folowing code which executing properly,but there is no effect on JPEG whether the value of jpegparam.s.jpeg.embedICCProfile is 0 or 1.
/////Start
ASOptimizationSettings jpegparam;
jpegparam.fileFormat = asffJPEG;
jpegparam.s.jpeg.embedICCProfile = isICCProfileEmbeded;
ASInt32 optID;
optID = sAIOptSet->GetUniqueOptimizationSettingsID();
error = sAIOptSet->SetOptimizationSettings(optID, &jpegparam); // after executing this line error = 0
/////End
I guess it would work when we export document as jpeg through AIActionManagerSuite
not with rasterizing the layer's art and then exporting them as JPEG using AsJPEG().
thanks -
A way to force XMP sidecar file use with JPEG files?
I have a nice camera but it only saves in JPEG format. Once I rename the files and put my basic copyright info into the metadata, I like to mark them as read-only for safety. However, I want to be able to save the metadata that I enter in Lightroom 1.1 out to disk along with the files so that other programs can read it. I see that Lightroom will save in a separate XMP sidecar file if the photo is in one of those snobby RAW formats but not if it is in one of the low-life formats like JPEG. ;^)
Is there any way at all to get Lightroom to use a sidecar file with JPEGs or do I have to just risk it and let it edit my JPEG files every time I do anything? I'm sorry, but my lowly JPEG files are just as important to me as a RAW file is to someone else. They are my photographs and I want to protect them.I'm not a pro so my backup routine is a little slip-shod. Sometimes I just grab a few files off the card, process them, and send the processed version out to whichever friend or relative is waiting impatiently for them.
I guess, I am most concerned about:
A) LR corrupting the working file and losing all the virtual edits. It is not easy for me to re-figure out what I did in the first place. Knowing about the safe-write technique helps.
B) Backing up just the edits. If the virtual/non-destructive edits were stored in separate .XMP files then I could back up those files to the same media as the original files and have them both together for future recovery operations. As it is, I now have to back up the entire working copy of the file in order to back up the edits. This creates two different versions of the file on my backup media, which will be harder to keep track of. Besides, .XMP files are small enough, and I would only be creating them for my better photos, so I could squeeze them onto the original backup media if I saved a bit of room. If I have to back up the entire modified file then it is less convenient.
C) When I write the metadata to the JPEG file, does it change the Windows modified date or creation date? -
FCPX XML not exporting audio with project...
FCPX XML not exporting audio with any project.
I have tried with several different projects to no avail.
Any thoughts or suggestions?
ThanksI used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.
Maybe you are looking for
-
27" TFT TV not working with my mac mini
My brand new mac mini does not work with my 27" TFT TV (D-Boss) using the DVI connection. The mac mini works fine if connected to a 17" or 20" TFT display, but the screen of my TV is black and I get the error message "out of range" (strange with digi
-
Like the question says. I receive an email from someone with an attachment. I can forward it on to someone else but that person cannot send the same email with the same attachment on to other people.
-
What is Card Manager and how does it work ?
Hi everyone, I would like to know how can I find complete description about "card manager"? If there is any document or link that have explained it ,please inform me. yours sincerely, Orchid
-
How to avoid printing of void cheques
Hi Friends, In the check printing program FBZ5, whenever there are more than 25 line items, the first two cheques are getting cancelled and the third cheque is getting printed and thereby wasting the first two cheques. I would like to know, how to a
-
Move Podcast from MobileMe to GoDaddy
I know similar questions like this have already been asked. I've read the various discussion and answers. I think I know what I need to do, but I want to confirm it here on the boards. A mistake could very well cost me listeners. I have moved my s