Export single table from Production

Dear Experts
I have to export a single table from Production and import that into Quality. In SCC8 we have a option in expert mode (SingleCopy option tables) will this help me in exporting the data of a single table if yes but which profile do we select?
or do we have any other method for this.
Thanks & Regards
Amit Paithanakr

The fastest and easiest way is to ask your SAP Basis administrator to perform an export/import via R3trans.
Kind regards,
Mark

Similar Messages

Export single table in maxdb 7.4 and import table into maxdb 7.7

Hello Guru
Need your help as follows
how to export single table from 32 Bit MAXDB 7.4 and import same table into another MAXDB 7.7 X64 bit.
Thanks and Regards
A P Rao

Hello,
the Database Studio Loader features are only available for MaxDB version > 7.5.
Please have a look at the Loader documentation "Export table" and "Import table" command.
http://maxdb.sap.com/doc/7_7/14/a08027b665485f8e09eca0c336171d/content.htm
http://maxdb.sap.com/doc/7_7/24/ff7c8db8ae46f69a5ed3ec7e4c4db6/content.htm
Best Regards
Wolfgang

How to restore a single table from a DP Export from a different schema?

Environment:
Oracle 11.2.0.3 EE on Solaris
I was looking at the documentation on DP Import trying to find the correct syntax to import a single table from a DP Export of a different schema.
So, I want to load table USER1.TABLE1 into USER2.TABLE1 from a DP Export.
Looking at the REMAP_TABLE options:
REMAP_TABLE=[schema.]old_tablename[.partition]:new_tablename
OR
REMAP_TABLE=[schema.]old_tablename[:partition]:new_tablenameI can't see where to specify the target schema name. The examples had the new table name residing in the same schema with just a new name.
I looked at the REMAP_SCHEMA but the docs say that will import the entire schema into the new schema and I only want one (1) table.
Any suggestions are most welcome!
-gary

I thought I tried that combination and it seemed to me that the REMAP_SCHEMA somehow over-rode the TABLES= parameter >and started loading all the objects.If it does fail (and it should not) then please post the details here and I will try to see what is happening.
Let me get back into the sandbox and try it again. I admit I was in a bit of a hurry when I did it the first time.We are all in a hurry, no worries. If it fails, please post the details and the log file.
Does it make any sense that one parameter would override another?No, this should never happen. We have tons of checks to make sure the job can't have multiple meanings. For example, you can't say
full=y schemas=foo --- Which do you want, a full export or a list of schema exports, etc.
Your suggestion was the first thing I thought would work.This should work. If not, please post the log file with the command and the results.
Dean
Thanks again for the help and stay tuned for my new attempt.
-gary

Exporting a single table from an acrobat created form

I created a 5 page document InDesign (CS5.5), On one page I created a table that is 4 columns x 25 rows (with the first row being a header), using the table feature. I then exported to pdf and finalized the form in Acrobat 9.2 Pro. After running the Form Field Recognition the table was populated with the appropriate fields. I finalized the form and distributed. When the form is returned to me, I am trying to export JUST the information in this table to a spreadsheet (employee name, title, phone, email, ) and do not seem to be able to do so. Is this possible from a form? It doesn't seem like the pdf recognizes this table as a table any longer. It is a list of attendees, so I want to take this list from each returned form and combine them all into a master list.
With the selection tool I have tried to select all the text > right click > Open Table in Spreadsheet and only the header rows appear. If I choose just the text and not the headers, then nothing appears. If I export the entire document then each cell of the table is its own column in excel, which makes sense since they all have different field names, but this doesn't make the spreadsheet useful. The only thing I have been able to do is select all the cells, copy into notepad, place a tab between each piece of information > save and open that document in excel. I am hoping there is an easier way. Basically all I am trying to do is have that table appear in excel as it does the pdf. I have searched several websites and have not been able to find anything that specifically deals with exporting a single table from a completed form.
Perhaps I need to set the table field names differently? Any assistance would be greatly appreciated.

The "table" idea here is just a design idea, the identity as a table no longer exists in a PDF. The feature you're trying to use is for tables which are part of the regular PDF, not form fields.
You can export form data. All fields, but then process to exclude the ones you don't want.

Import / Export Specific tables from DB

Hi,
I am trying to export all 'AD_' tables from my database from another database with their constraints.
I tried a command just for export one table from my cmd :
"exp adempiere/adempiere@simext15:1521/compiere2 file=emp.dmp tables=(AD_ACCESSLOG)"
it export fine but when try to import this file from using command
"imp adempiere/adempiere@simext15:1521/compiere2 file=emp.dmp fromuser=adempiere touser=adempiere tables=(AD_ACCESSLOG)"
it gives me so many errors:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V11.01.00 via conventional path
import done in WE8MSWIN1252 character set and UTF8 NCHAR character set
. importing ADEMPIERE's objects into ADEMPIERE
. . importing table "AD_ACCESSLOG" 0 rows imported
IMP-00015: following statement failed because the object already exists:
"CREATE UNIQUE INDEX "AD_ACCESSLOG_KEY" ON "AD_ACCESSLOG" ("AD_ACCESSLOG_ID""
" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FR"
"EELIST GROUPS 1 BUFFER_POOL DEFAULT) LOGGING"
IMP-00017: following statement failed with ORACLE error 2264:
"ALTER TABLE "AD_ACCESSLOG" ADD CONSTRAINT "AD_ACCESSLOG_KEY" PRIMARY KEY ("
""AD_ACCESSLOG_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(I"
"NITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "
""USERS" LOGGING ENABLE "
IMP-00003: ORACLE error 2264 encountered
ORA-02264: name already used by an existing constraint
IMP-00017: following statement failed with ORACLE error 2264:
"ALTER TABLE "AD_ACCESSLOG" ADD CONSTRAINT "ADTABLE_ADACCESLOG" FOREIGN KEY "
"("AD_TABLE_ID") REFERENCES "AD_TABLE" ("AD_TABLE_ID") ENABLE NOVALIDATE"
IMP-00003: ORACLE error 2264 encountered
ORA-02264: name already used by an existing constraint
IMP-00017: following statement failed with ORACLE error 2264:
"ALTER TABLE "AD_ACCESSLOG" ADD CONSTRAINT "ADCOLUMN_ADACCESSLOG" FOREIGN KE"
"Y ("AD_COLUMN_ID") REFERENCES "AD_COLUMN" ("AD_COLUMN_ID") ON DELETE CASCAD"
"E ENABLE NOVALIDATE"
IMP-00003: ORACLE error 2264 encountered
ORA-02264: name already used by an existing constraint
About to enable constraints...
IMP-00017: following statement failed with ORACLE error 2430:
"ALTER TABLE "AD_ACCESSLOG" ENABLE CONSTRAINT "ADTABLE_ADACCESLOG""
IMP-00017: following statement failed with ORACLE error 2430:
"ALTER TABLE "AD_ACCESSLOG" ENABLE CONSTRAINT "ADCOLUMN_ADACCESSLOG""
Import terminated successfully with warnings.
I tried a lot for this I just want to export and restore all 338 tables related to Application Dictionary from one database to another database with their constraints and data.
I tried also using datalink but it only copy the structure and data but not the constraints, I want all three should be copy in to another database.
I know their is dependency on a table to another table but i don't know exactly it..
tried it onces again i am able to do export and import tables but only primary key related to every table gets restore neither Unique key nor Foreign key , please help me out from this i can export and import with full table with data and its all constraints.
Please help me out from this problem, waiting for your valuable suggestions.
Regards,
Manu

ORA-02264: name already used by an existing constraint
The constraint is already exists with the same name. So drop that before issuing the import command.
And ,
1. Check if all tables get imported
2. If all tables get imported then create the constraints manually
3. If tables do not get imported then import tables manually by specifying their name in imp statement
Thanks

I want to export few tables from 9.2.0.2 database and import to 10.2.0.1

Dear All,
I am newbie to oracle, my company wants to export few tables from 9.2.0.2 database to 10.2.02. ( they are using developer 2000 4.5/ and oracle reports 6i)
The puropose of this activity is to use forms and reports of 9i into 10g to check if it works.
The configuration of Test machine is core2duo processor, 2gb ram, 500gb hard disk.
I have few questions, as i am newbie am little afraid, so please help me,
what are the precautions i have to make before running export command on 9i database?
What are teh precautions i have to make before running import command on 10g database?
My manager wants me too export it with user,synonyms,grants,priveleges as it is production database? how to do that?
How to check what are the grants and privileges of a users in 9i?
My production database is on 9i and on solaris 10 i am going to install 10g database on windows xp as test instance, is it correct to do this way??
My manager said i should use NLS_LANG as AMERICAN_AMERICA.AR8MSWIN1256 as a character set while installing database.
Note:- I have installed oracle 10g from OTN.
Please help me as early as possible.
Regards,
user9007339

No, that it doesn't mean. You will have to use the exact right version at the right time. From lower version to higher you need to use source db exp tool and target db imp. From higher to lower you need to use target db exp and target db imp.
In other words:
Always use exp from lowest version and imp from target version!
See Metalink, Note:132904.1

Recover a single table from a complete rman

Hi
I need to restore a single table from a complete rman backup, but it seems like this backup is divided into datafiles and this table is allocated together with others.
I use a library for make backups.
Does anybody know how can I get this unique table's information from my rman backup?

Hi
Which version of Oracle are you using?
If you are using 9i you must restore the database with another name and dann export/import the needed tables.
If you are using10g you can try with the SQL-command: FLASHBACK TABLE
Bye, Aron

Access 2013 crashed when I export a table from the access

Hi!
Access 2013 always crashed when I export a table from the access to the Database Symfoware.
1、The conditions of the Access 2013 crashed are the follows.
1)Create a table in the Access 2013.
2)Using the ODBC driver of the Database Symfoware to export the table from the access to the Database Symfoware.
2、The Environments are the follows.
1)Access 2013 X64(Version:15.0.4420.1017)
2)Win2008R2 X64
3)Symfoware V11.1 X64
3、The Application log from the Win2008R2 are follows.
ログの名前: Application
ソース: Application Error
日付: 2014/04/18 16:21:06
イベント ID: 1000
タスクのカテゴリ: (100)
レベル: エラー
キーワード: クラシック
ユーザー: N/A
コンピューター: WIN-29UTU2AIK6J
説明:
障害が発生しているアプリケーション名: MSACCESS.EXE、バージョン: 15.0.4420.1017、タイムスタンプ: 0x50674523
障害が発生しているモジュール名: ACECORE.DLL、バージョン: 15.0.4420.1017、タイムスタンプ: 0x506742b7
例外コード: 0xc0000005
障害オフセット: 0x0000000000171f36
障害が発生しているプロセス ID: 0xb6c
障害が発生しているアプリケーションの開始時刻: 0x01cf5ad638668c5b
障害が発生しているアプリケーションパス: C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE
障害が発生しているモジュールパス: C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL
レポート ID: 00e87957-c6ca-11e3-ad2c-0050568d2ced
イベント XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-18T07:21:06.000000000Z" />
<EventRecordID>3442</EventRecordID>
<Channel>Application</Channel>
<Computer>WIN-29UTU2AIK6J</Computer>
<Security />
</System>
<EventData>
<Data>MSACCESS.EXE</Data>
<Data>15.0.4420.1017</Data>
<Data>50674523</Data>
<Data>ACECORE.DLL</Data>
<Data>15.0.4420.1017</Data>
<Data>506742b7</Data>
<Data>c0000005</Data>
<Data>0000000000171f36</Data>
<Data>b6c</Data>
<Data>01cf5ad638668c5b</Data>
<Data>C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE</Data>
<Data>C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL</Data>
<Data>00e87957-c6ca-11e3-ad2c-0050568d2ced</Data>
</EventData>
</Event>
4、When the access crashed,I got the dump file .Then I use the Windbg got some information from the dump files.
The detailes are follows.
FAULTING_IP:
+58872faf03d6dd84
00000000`00000000 ?? ???
EXCEPTION_RECORD: 00000000001723c0 -- (.exr 0x1723c0)
ExceptionAddress: 000007fee3951f36 (ACECORE+0x0000000000171f36)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
FAULTING_THREAD: 00000000000010b8
DEFAULT_BUCKET_ID: WRONG_SYMBOLS
PROCESS_NAME: MSACCESS.EXE
ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.
MODULE_NAME: ACECORE
FAULTING_MODULE: 0000000076eb0000 ntdll
DEBUG_FLR_IMAGE_TIMESTAMP: 506742b7
ERROR_CODE: (NTSTATUS) 0x80000003 - {
EXCEPTION_CODE: (NTSTATUS) 0x80000003 (2147483651) - {
MOD_LIST: <ANALYSIS/>
CONTEXT: 0000000000171ed0 -- (.cxr 0x171ed0)
rax=0000000001be3598 rbx=0000000000000000 rcx=01cf5d1b0f402a5c
rdx=0000000009cfad30 rsi=0000000006688ef0 rdi=0000000001be35d0
rip=000007fee3951f36 rsp=0000000000172490 rbp=00000000001727a0
r8=0000000009b409d0 r9=0000000006688ef0 r10=0000000000000000
r11=0000000000000246 r12=0000000000000000 r13=0000000001be19f0
r14=0000000009cfad30 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
ACECORE+0x171f36:
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12 ds:00000000`00000000=????????????????
Resetting default scope
PRIMARY_PROBLEM_CLASS: WRONG_SYMBOLS
BUGCHECK_STR: APPLICATION_FAULT_WRONG_SYMBOLS
LAST_CONTROL_TRANSFER: from 000007fee395c095 to 000007fee3951f36
STACK_TEXT:
00000000`00172490 000007fe`e395c095 : ffffffff`ffffffff 00000000`00000000 00000000`01bddaa2 ffffffff`ffffffff : ACECORE+0x171f36
00000000`001727b0 000007fe`e388f8eb : 000007fe`e399dc10 000007fe`e399dc30 000007fe`e399dc50 00000000`000000f9 : ACECORE+0x17c095
00000000`00172b50 000007fe`e388f590 : 00000000`06688ef0 00000000`00000004 00000000`000000f9 00000000`00000000 : ACECORE+0xaf8eb
00000000`00172ba0 000007fe`e388f406 : 00000000`00000004 00000000`000000f9 00000000`11cb1130 00000000`000000f9 : ACECORE+0xaf590
00000000`00172c30 000007fe`e391aee7 : 00000000`00000000 00000000`00173198 00000000`06688ef0 00000000`11cb0998 : ACECORE+0xaf406
00000000`00172c70 000007fe`e3933a72 : 00000000`00400100 00000000`00000002 00000000`00000001 00000000`06688ef0 : ACECORE+0x13aee7
00000000`00172e50 000007fe`e384e5b1 : 00000000`00000000 00000000`11cb0020 00000000`06688ef0 00000000`00000001 : ACECORE+0x153a72
00000000`00172e90 000007fe`e38358d1 : 00000000`000007ff 00000000`06688ef0 00000000`01bd99f0 00000000`00000000 : ACECORE+0x6e5b1
00000000`00173280 000007fe`e38718eb : 00000000`000007ff 00000000`06688ef0 00000000`11cb0000 00000000`00000000 : ACECORE+0x558d1
00000000`00173340 00000001`3f3b0cd2 : 00000000`0a0945c0 00000000`000000fe 00000000`000007ff 00000000`00000000 : ACECORE+0x918eb
00000000`00173430 00000001`3f3b0b9b : 00000000`00173730 00000000`001741e0 00000000`065e5b00 00000000`00000100 : MSACCESS!CreateIExprSrvObj+0x16af32
00000000`00173630 00000001`3f3afcea : 00000000`00173730 00000000`00000000 00000000`00000000 00000000`065e5b00 : MSACCESS!CreateIExprSrvObj+0x16adfb
00000000`001736a0 00000001`3f983140 : 00000000`00174401 00000000`0a3235e0 00000000`0a319aa0 00000000`00179fc8 : MSACCESS!CreateIExprSrvObj+0x169f4a
00000000`00174290 00000001`3f3aabeb : 00000000`00000000 00000000`00000000 00000000`00179f38 00000000`00000000 : MSACCESS!FUniqueIndexTableFieldEx+0x26ab4
00000000`00174530 00000001`3f3a9670 : 00000000`001778e0 00000000`00179f38 00000000`00000031 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x164e4b
00000000`00177870 00000001`3f3a8c1b : 00000000`00000010 00000000`108c5990 003d0044`00570050 00000000`74ac3f69 : MSACCESS!CreateIExprSrvObj+0x1638d0
00000000`001779d0 00000001`3f5450df : 00000000`0a0945c0 00000000`0000009c 00000000`0a0945c0 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x162e7b
00000000`00179e30 00000001`3f64e915 : 00000000`43ed8000 00000000`00000000 00000000`3f800000 00000000`00000000 : MSACCESS!FillADT+0x5830b
00000000`0017c450 00000001`3f33b172 : 00000000`00000000 00000000`0006075e 00000000`0017e370 00000000`00000000 : MSACCESS!IdsComboFillOfActidIarg+0xaddf1
00000000`0017d730 00000001`3f33a9ef : 00000000`0017e0a0 00000000`00000b86 00000000`00000000 00000000`0fea0000 : MSACCESS!CreateIExprSrvObj+0xf53d2
00000000`0017d790 00000001`3f33a20c : 00000000`06620400 00000000`00000000 00000000`00000001 00000000`0017e420 : MSACCESS!CreateIExprSrvObj+0xf4c4f
00000000`0017e400 00000001`3f6019cd : 0071023b`007a000a 00000000`00374a30 00000000`00000005 00000000`0000000c : MSACCESS!CreateIExprSrvObj+0xf446c
00000000`0017e850 00000000`06706fd5 : e2504700`aa00ee81 00005d1b`0f2363ea 00000000`0017e9e0 00000001`3f200000 : MSACCESS!IdsComboFillOfActidIarg+0x60ea9
00000000`0017e8f0 00000000`0a30c378 : 00000000`00000000 00000000`00000008 00000000`067069ac 00000000`00000000 : 0x6706fd5
00000000`0017e960 00000000`00000000 : 00000000`00000008 00000000`067069ac 00000000`00000000 00000000`00000008 : 0xa30c378
FOLLOWUP_IP:
ACECORE+171f36
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: ACECORE+171f36
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: ACECORE.DLL
STACK_COMMAND: .cxr 0x171ed0 ; kb
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS_80000003_ACECORE.DLL!Unknown
WATSON_STAGEONE_URL: http://watson.microsoft.com/StageOne/MSACCESS_EXE/15_0_4420_1017/50674523/unknown/0_0_0_0/bbbbbbb4/80000003/00000000.htm?Retriage=1
Followup: MachineOwner
5、Where the access crashed I used the ODBC trace to get the trace log of the ODBC API.
The ODBC API called by Access before it crashed are the follows.
I also ansysised the log,and I did not find any Abnormal.
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
6
SWORD
-8 <SQL_C_WCHAR>
PTR 0x00000000002C1F20 [
12] "LENGTH"
SQLLEN 62
SQLLEN * 0x00000000002C1E38 (12)
Test 1174-10f0
ENTER SQLGetData
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38 (-1)
Test 1174-10f0
ENTER SQLFetch
HSTMT 0x0000000009F7C490
Test 1174-10f0
EXIT SQLFetch with return code 100 (SQL_NO_DATA_FOUND)
HSTMT 0x0000000009F7C490
Test 1174-10f0
ENTER SQLFreeStmt
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
Test 1174-10f0
EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
6、I also did the test with the Access 2010,and with the Sql Srever/Oracle.
The results are the follows.
1) With the Access 2010(X86 or X64) and Access 2013 X86,it successes when I export the table to the DB Symfoware.But only with the Access 2013 X64,the Access crashed.
2)With the Access 2010(X86 or X64) and Access 2013(X86 or X64),using the Sql Srever/Oracle,it always successes .
According to all the descrived above, I wonder if it a bug of the Access2013 .
Could anyone can help me ?
Thanks for any help.

George Zhao
Thank you for your help.
I have already install
the latest patches of the Office 2013.But it doesn't work.It is down also too. And ODBC
drive of Database Symfoware is the newest driver of the Database Symfoware. Now I wonder that
if it si a bug of the ODBC
drive of Database Symfoware,I should fix the bug,but I have analysised the odbc trace log and I do not find any wrongs ,so I think maybe it is a bug of the Access .
I have see many situations about the Access down on the internet .

Exporting single tracks from a garageband project

how can i export single tracks from a garageband (6.0.5) project (and not the whole song) to be converted in aiff/wav?
thanks

Solo the track you want to export by clicking the solo (arrow)button in the Track header. Then export the song to the disk.

Capture/Export single frame from viewer.

Hi Folks,
Installed is the most current release.
Seems to have lost ability to capture/share/export single frame from viewer.
How do I capture a single frame appearing in the viewer?
Output desired is a PNG file.
Thank you,
Manuel

Click the Share button. Select Add Destimnations and you'll see Still Image in Destination preferences.

How to export single part from (IGES, STEP) assembly

Hello,
I would like ask, how to export single part from assembly. If I open any assembly (from step or iges), how I export only one part from that assembly to for example X_T (parasolid). Then the name of that part will by corresponding to name in the component tree of assembly?
Thanks in advance

Hello,
Import your sample CAD file into A3DReviewer, select a single part then right click " Isolate "
The single part is isolated, now go to File/export select the extension file needed and press ok.
Only the isolated part is exported.
Hope it helps
Best Regards
William Gallego
A3D QE Team

How to export / import tables from UAT Environment to Devlopment in oracle

i wanted to share some points about export/import tables in oracle.
we have two environments one is development and integrated user acceptance test (UAT).
we have finalized table structures with data in UAT. i wanted to move from UAT to Development.
i found some commends in google. I tried but I am not able to export and then its throwing some errors.
i am explaining below what i want to do and what i want did.
Please provide solution what i need to do.
admin credentials in UAT
username :venkat_admin
password :venkat_admin
UAT user/schema
username : ods_inb_stg
password : ods_inb_stg
development environment credentials
admin user name : dev_admin
password : dev_admin
Development user/schema
username :ods_inb_dev
password :ods_inb_dev
Above mentioned schema names i want move data from UAT (ods_inb_stg) to development (ods_inb_dev)
I logged in uat ods_inb_stg user and then
I used this command
Exp ods_inb_stg/ods_inb_stg file=party_pt_address.expdat tables=(party,party_address)
log=party_pt_address.log;
getting error
Unknown command beginning "exp ods_inb_stg/..." - rest of line ignored.
What should I do any one help.
One more thing i have more than 100 tables how to export all tables and which is the easiest way and how to do it.
Thanks in Advance
Venkat

Hi,
based import and export we need to do.
suppose we think we have created tables in production and data also populated. we need to export the tables with data. i am able to export the tables with data some tables or full database.
suppose we have development environment. in development environment there is no tables. we can treat nothing in development. we have only username,password and hostname.
when you import the tables production to development automatically create the table structures with data.
where ever we wanted to import the tables no need to create table structures. thats why no need to think about table structures.

Exporting Internal Table from Methods

Hi Experts,
I wanted to export an internal table from Methods and I am using below syntax and its not working.
METHODS get_data IMPORTING value(s_matnr) type mara-matnr
exporting it_tab TYPE STANDARD TABLE itab.
Please let me know what is the proper syntax.
Thanks
Basanagouda

Hi,
Define itab as a 'table type' of standard table.
Example: TYPES: t_sflight TYPE STANDARD TABLE OF sflight.
METHODS : get_data IMPORTING s_carrid type sel_carrid
EXPORTING e_tab type t_sflight.
ENDCLASS

How to get a single table from a .db file

Hello,
We have taken a backup of our whole schema into a .db file. and by mistake one of our table in that schema got truncated. Is there any way we can restore only that table from the .db file?
Please help.
Thanks
Ramesh

It's not so easy. You could perform a point-in-time recovery of the whole database, where point-in-time is the moment just before the table was truncated. Big disadvantage is you lose all other changes made after the truncation,too. Or you restore to an auxiliary database, export the table and import it back into the source database.
Werner

Export internal table from report to web-dynpro

Hi,
I am trying to export an internal table from a report to my web dynpro pragram however its not working.
Statement used in my report -
EXPORT it_ordbk FROM it_ordbk TO MEMORY ID 'ZORDBK'.
Statement used in my web dynpro program
IMPORT it_ordbk to it_ordbk FROM MEMORY ID 'ZORDBK'.
This dynpro application is being called in HTML container on the screen.
Kindly help.
Cordially,
Danish

Hi Danish,
do not use export or import in Webdynpro.
try to create a class with global variables and in the report or at the place of Export fille the data .
and next in the place of Import memory to to call the global variable in the webdynpro and fill the internal table
go to se24> create a zclasss-> methods initialize>create a ztable same as export table and also declare in glaobal vairaible
--> next in the webdynpro program -->call the method retrive and push the global data to internal table.
Prabhudas

Export single table from Production

Similar Messages

Maybe you are looking for