EXPORT STATEMENT fro INTERNAL TABLE VALUES

Hi,
From one program I am calling my program using SUBMIT statement.
In the subprogram, I will be doing som process.If I get any error message I am storing in an internal table.
This internal table has to come to the main program.
So that I will create an Idoc in main program for all the error messages.
For this I am using EXPORT IMPORT statements.
wa_idoc_msg-type = text-003.
wa_idoc_msg-id = 'ZLES'.
wa_idoc_msg-number = '477'.
append wa_idoc_msg to t_idoc_msg.
clear wa_idoc_msg.
exit.
export (T_IDOC_MSG) to memory id 'T_IDOC_MSG'.
Now In this export line, I am getting error as ZLES not able to recognize.
Help required for this issue.

Hi,
Check the below link
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Regards,
nagaraj

Similar Messages

Uregent Requirement, related with export & import of internal table values

Hello All,
According to my requirement
I created a copy program(ZRSEIDOC2)   which is copy program of RSEIDOC2attached in T Code WE02.
and I created another program ZXXXXXX.
Now what I am trying to do is
1.     I am trying to export the final output table/internal table to program ZXXXXXX.
Export I_listedidc to memory id SID.
2.     In Program ZXXXXXX, I used to submit statement & import statement for output table/internal table.
Submit ZRSEIDOC2 using selection-screen 1000.
Import I_Listedidc to memory id SID.
Which give the automated way to find out the output i.e. status,process,.
My Question is..
Is I_listedidc right table/itab, which I am using my statement?
Do I am writing the code in a right way?

use:
Export I_listedidc to memory id 'SID'.
Submit ZRSEIDOC2 using selection-screen 1000.
Import I_Listedidc from memory id 'SID'.
A.

Update statement in Internal Table

Plz tell me the syntax and e.g. of update statement in Internal Table program
Moderator message: Welcome to SCN, please research yourself before asking basic questions.
Edited by: Thomas Zloch on Feb 25, 2010 12:47 PM

Hi,
Use UPDATE statement , check below description from SAP help.
UPDATE dbtab FROM TABLE itab. or UPDATE (dbtabname) FROM TABLE itab.
Effect
Mass update of several lines in a database table.Here, the primary key for identifying the lines tobe updated and the values to be changed are taken from the lines of theinternal table itab.
The system field SY-DBCNT contains the number of updated lines,i.e. the number of lines in the internal table itab which havekey values corresponding to lines in the database table.
Regards
L Appana

Passing '**********' to screen field value instead of internal table value

Hi All,
I have written BDC, in which when i pass value for second screen "Description type field" it's passing '*************************' instead of internal table value.
It's picking correct value for first internal table value. Could anyone please give an idea why it's happening?
Please find the code:
LOOP AT it_record.
header data for BDC
 AT NEW CLASS.
 IF sy-tabix <> 1.
 perform bdc_dynpro using 'SAPLCLMO' '7777'.
 perform bdc_field using 'BDC_OKCODE'
 '=SAVE'.
 CALL TRANSACTION 'CLWM' USING bdcdata
 MODE p_mode
 UPDATE 'S'
 MESSAGES INTO messtab.
 clear : bdcdata[],bdcdata.
 ENDIF.
 perform bdc_dynpro using 'SAPLCLMO' '0200'.
 perform bdc_field using 'BDC_CURSOR'
 'RMCLM-CLASS'.
 perform bdc_field using 'BDC_OKCODE'
 '/00'.
 perform bdc_field using 'RMCLM-CLASS'
 it_record-class.
 perform bdc_dynpro using 'SAPLCLMO' '7777'.
 perform bdc_field using 'BDC_OKCODE'
 '/00'.
 perform bdc_field using 'BDC_CURSOR'
 'RMCLM-KLBEZ'.
 perform bdc_field using 'RMCLM-KLBEZ'
 it_record-klbez.
 perform bdc_field using 'RMCLM-STATU'
 '1'.
 perform bdc_dynpro using 'SAPLCLMO' '7777'.
 perform bdc_field using 'BDC_OKCODE'
 '=MERK'.
 perform bdc_field using 'BDC_CURSOR'
 'RMCLM-KLBEZ'.
 perform bdc_field using 'RMCLM-KLBEZ'
 it_record-klbez.
 perform bdc_field using 'RMCLM-STATU'
 '1'.
 MOVE 1 TO IDX.
 ENDAT.
line item data for BDC
 perform bdc_dynpro using 'SAPLCLMO' '7777'.
 perform bdc_field using 'BDC_OKCODE'
 '/00'.
 perform bdc_field using 'BDC_CURSOR'
 'RMCLM-RELEV(02)'.
 CONCATENATE 'RMCLM-MERKMA(' IDX ')' INTO FNAM.
 perform bdc_field using FNAM
 it_record-merkma.
 CONCATENATE 'RMCLM-RELEV(' IDX ')' INTO FNAM.
 perform bdc_field using FNAM
 it_record-relev.
 IDX = IDX + 1.
ENDLOOP.
Thanks,
Ujjwal

Hi Ujjwal
The reason behind this is that you are using AT NEW.... ENDAT block in your coding.
When you use AT NEW field statements, the fields in the work area after the field get converted into ********.
Check values in your work area I_RECORD in debugging inside AT NEW statement and you will understand what I am saying.
In your case all the fields from header line of I_RECORDS which come after field CLASS are getting converted into *******,
hence the error.
Try using a temporary work area, say w_record. Pass value of I_record to w_record before AT NEW statement.
And use w_record-fields instead of I_record-fields. And your program should work.

Submititng the program to another program using internal table values

Hi All,
How to Submit from one program to another program using internal table values minimum 7 int tables without using the seletion screen
thanks
raj

Hi All,
Thank you very much for your inputs.
i am facing another issue:
For each 10,000 records it should trigger a job (we are trying to call a program) were the validation will be done only through the other program.
please find the code mentioned below :
TABLES : but000.
DATA: int_bp LIKE but000 OCCURS 0 WITH HEADER LINE.
data released like BTCH0000-CHAR1.
DATA: jobnumber LIKE tbtcjob-jobcount, " Job ID and
      jobname LIKE tbtcjob-jobname, " job name.
      startdate LIKE tbtcjob-sdlstrtdt, " Start-time
      starttime LIKE tbtcjob-sdlstrttm, " window specs.
      laststartdate LIKE tbtcjob-laststrtdt,
      laststarttime LIKE tbtcjob-laststrttm,
      job_released LIKE btch0000-char1. " JOB_CLOSE: Was job released?
DATA : l1 TYPE i,
       b_size TYPE i,
       b_cursor TYPE cursor.
INITIALIZATION.
b_size = 5000.
START-OF-SELECTION.
OPEN CURSOR WITH HOLD b_cursor
     FOR
     SELECT *
     FROM but000
     WHERE bpkind = 'AA'.
IF sy-subrc = 0.
    DO.
      FETCH NEXT CURSOR b_cursor INTO TABLE int_bp
                                           PACKAGE SIZE b_size.
Note : here in this point we are getting a dump for the second job trigger.
      IF sy-subrc = 0.
        CLEAR jobname.
        CONCATENATE sy-repid sy-datum sy-uzeit INTO jobname.
export int_bp to memory id 'ABC'.
        CALL FUNCTION 'JOB_OPEN'
             EXPORTING
                  jobname          = jobname
             IMPORTING
                  jobcount         = jobnumber.
            EXCEPTIONS
                 cant_create_job = 1
                 invalid_job_data = 2
                 jobname_missing = 3
                 OTHERS           = 4
CALL FUNCTION 'JOB_SUBMIT'
      EXPORTING
           authcknam = sy-uname
           jobname   = jobname
           jobcount = jobnumber
           report    = 'YTEST_RRR'.
           variant   = lv_variant.
   SUBMIT ytest_rrr
      VIA JOB jobname NUMBER jobnumber
      AND RETURN.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
       event_periodic                    = 'X'
        jobcount                          = jobnumber
        jobname                           = jobname
        strtimmed                         = 'X'
      IMPORTING
        job_was_released                  = released
        else.
        EXIT.
      ENDIF.
    ENDDO.
calling program :
REPORT YTEST_RRR .
data itab1 like but000 occurs 0 with header line.
data l type i.
import itab1 from memory id 'ABC' .
describe table itab1 lines l.
free memory id 'ABC'.
write:/ 'total records are:', l.
Please give your suggestion why its going for dump in the second iteration.
thanks in advance.

How to bind internal table values with RootUIElement(Table) from select Que

Hello Friends,
 In my view Layout,there r two Input fields ,Submit button and Table... My concept is when user posting values in two input fields and clicking submit button means the result(more than one values) should be displayed in Table...
 I written coding also but i dont know to bind internal table values with Table... My code as follows,
method onactionsearch .
 data:
 Node_Node_Flight type ref to If_Wd_Context_Node,
 Elem_Node_Flight type ref to If_Wd_Context_Element,
 Stru_Node_Flight type If_View1=>Element_Node_Flight ,
 itab TYPE STANDARD TABLE OF sflight.
navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
 Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
@TODO handle not set lead selection
 if ( Node_Node_Flight is initial ).
 endif.
get element via lead selection
 Elem_Node_Flight = Node_Node_Flight->get_Element( ).
@TODO handle not set lead selection
 if ( Elem_Node_Flight is initial ).
 endif.
alternative access via index
Elem_Node_Flight = Node_Node_Flight->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Node_Flight is initial ).
endif.
get all declared attributes
 Elem_Node_Flight->get_Static_Attributes(
 importing
 Static_Attributes = Stru_Node_Flight ).
select * from sflight into CORRESPONDING FIELDS OF TABLE itab
WHERE carrid = Stru_Node_Flight-carrid and connid = Stru_Node_Flight-connid.
Node_Node_Flight->bind_table( new_items = itab ).
endmethod.
Plz reply me asap...!

Hi,
What I understood from your coding is...
* navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
You are reading values from the above node and binding the values to the same node.Am i right?
Did you take seperate context node for your input fields or binded the above context to the fields.If not then read the context attribute values which are binded to the carrid and connid then pass these values to select query.
One more thing is select cardinality 1..n for node NODE_FLIGHT since you are displaying more than one record.
Go through the some basic tutorials.Search in sdn you will it get.Already there is a tutorial in sdn which explains exactly what do you require.
Go throgh this link
Web Dynpro for ABAP: Tutorials for Beginners
Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
Edited by: suman kumar chinnam on Mar 26, 2009 10:50 AM

How to Refresh "Internal table values" in User EXIT.

Dear All,
My requirement is to place some checks in exit ZXQQMU20 in different tabs from the TCODE IW21 . IW22 etc.
Now after placeing the checks towards the different tabs while doing "NOCO" from IW21 the conditions are fullfilled but
when i go ahead to modify the created "NOCO " from the TCODE IW22 by deleting the created values and saving in IW22 , the conditions written in the exit are still satisfied eventhough i have deleted the values in IW22.
The reason for this is that the tables which are there in the exit ZXQQMU20 T_VIQMFE , T_VIQMUR , T_VIQMMA
still contains the old values which were there at the time of creation of "NOCO" in IW21 .
How to refresh my " internal tables values" used in such that even at the time of modification of the NOCO through IW22 my table values should pick the current screen values and not the values which were there at the time of creation.
Please help.
The code i have written in the exit is as below:-
********************* Changed vide ******START
*****IW21 IW22 also added in filter criteria of notification *************
******The purpose of this modification is that in the execution of IW21 or IW22 or IW24 or IW25 we have to give a check that if the
******notification type is M2 than inside the Transaction screen , if the Breakdown duration comes less than 15 min than there are
******no issues but if the breakdown duration is more than 15 min than the mandatory fields needs to be entered in the analysis tab.
** The user has to fill up either following mandatory fields in Analysis Data tab.
** A. Object Parts & Damages sub tab
** Code Group - Object Parts (OTGRP, VIQMFE)
** AND
** Code Group - Problem / Damage (FEGRP, VIQMFE)
** Or
** Notification Item Short Text (FETXT, VIQMFE)
** B. Cause sub tab
** Code Group # Causes (URGRP, VIQMUR)
** Or
** Cause Text (URTXT, VIQMUR)
** C. Action Taken sub tab
** Code Group # Activities (MNGRP, VIQMMA)
** Or
** Activity Text (MATXT, VIQMMA)
** Then, allow user to complete notification (NOCO).
CLEAR : L_VAR , L_COMP_TIME.
IF ( SY-TCODE EQ 'IW21' OR SY-TCODE EQ 'IW22' OR SY-TCODE EQ 'IW24' OR
 SY-TCODE EQ 'IW25' ).
 IF ( E_VIQMEL-IWERK = '061' ) OR ( E_VIQMEL-IWERK = '062' ).
 IF E_VIQMEL-QMART = 'M2'.
 L_VAR = E_VIQMEL-AUSZT.
 L_COMP_TIME = L_VAR / 60.
 IF L_COMP_TIME < 15.
 EXIT.
 ELSEIF L_COMP_TIME > 15..
* IF ( T_VIQMFE-OTGRP IS INITIAL AND T_VIQMFE-FEGRP IS INITIAL ) OR ( T_VIQMFE-FETXT IS INITIAL ) .
* MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
* ENDIF.
 IF T_VIQMFE-OTGRP EQ '' OR T_VIQMFE-FEGRP EQ ''.
 IF T_VIQMFE-FETXT EQ ''.
 MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
 ENDIF.
 ENDIF.
 CLEAR L_TAG.
 IF T_VIQMUR[] IS INITIAL.
 MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
 ELSE.
 LOOP AT T_VIQMUR.
 IF T_VIQMUR-URGRP IS INITIAL .
 IF T_VIQMUR-URTXT IS INITIAL.
 L_TAG = 'X'.
 ENDIF.
 ENDIF.
 ENDLOOP.
 IF L_TAG = 'X'.
 MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
 ENDIF.
 ENDIF.
 CLEAR L_TAG.
 IF T_VIQMMA[] IS INITIAL.
 MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
 ELSE.
 LOOP AT T_VIQMMA.
 IF T_VIQMMA-MNGRP IS INITIAL .
 IF T_VIQMMA-MATXT IS INITIAL.
 L_TAG = 'X'.
 ENDIF.
 ENDIF.
 ENDLOOP.
 IF L_TAG = 'X'.
 MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
 ENDIF.
ENDIF.
<Added code tags>
Thank you so much in advance..
-Sudhish
Please use the code tags when you're posting any code snippet
Edited by: Suhas Saha on Jul 13, 2011 12:39 PM

Hi, I was thinking just like XVBAP and YVBAP values in the USEREXIT_SAVE_DOCUMENT.
Plz check u have x /y versions or tables like _old/ _new suffixes and then move the value accordingly.
otherwise there may be inconsistency.
Edited by: Prasenjit S. Bist on Jul 13, 2011 3:03 PM

Can we apply select statement on internal table.

can we apply select statement on internal table.if yes thrn let me know how to do.

Dear Sachin,
You cannot use SELECT statement on internal table.
If you want to select some rows from internal table you can LOOP the table or you can READ the table.
Please check the following links for your kind reference:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
http://www.sap-img.com/ab009.htm
http://www.itsmarc.com/crs/Clas0302.htm
http://www.sapdevelopment.co.uk/tips/tips_itab.htm
http://searchsap.techtarget.com/search/1,293876,sid21,00.html?query=whatisinternaltable&bucket=ALL
Cheers !
Moqeeth.

Control statement in internal tables

hi experts,
can any body will provide me the control statement of internal table.
thank you

Hi,
check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9f1f35c111d1829f0000e829fbfe/content.htm
Control Break Statements
Control break statements are used to create statement blocks which process only specific table lines the LOOP ENDLOOP block.
You open such a statement block with the control level statement AT and close it with the control level statement ENDAT. The syntax is as follows:
Table should be sorted when you use control-break statements
You can break the sequential access of internal tables by using these statements.
Syntax:
At first.
<Statement block>
Endat.
This is the first statement to get executed inside the loop (remember control break statements are applicable only inside the loop)
So in this block you can write or process those statements which you want to get executed when the loop starts.
At New carrid.
Write:/ carrid.
Endat.
In this case whenever the new carrid is reached, carrid will be written.
At End of carrid.
Uline.
Endat.
In this case whenever the end of carrid is reached, a line will be drawn.
At Last.
Write:/ Last Record is reached.
Endat.
Processing of statements within this block is done when entire processing of entire internal table is over. Usually used to display grand totals.
You can use either all or one of the above control break statements with in the loop for processing internal table.
At end of carrid.
Sum.
Endat.
In above case the statement SUM (applicable only within AT-ENDAT) will sum up all the numeric fields in internal table and result is stored in same internal table variable.
Regards,
Sruthi

How to convert Internal table values to excel file

Hi Experts!!!
I have requirement to generate a Excel(.xls) file for a requirement. For this the final internal table values has to be moved to excel file. I have used function module "SAP_CONVERT_TO_XLS_FORMAT" to generate it to my local machine. But when i tried to generate the file in "AL11" folder its giving a dump. Ex(/sapia/iface/out/comm/saphr/test.xls). Can anyone please tell me is there anyother function modules or program to generate in sapia folder.
Thanks.
Ganesh R K

try to save as a tab delimited.

How to pass internal table values to parameter

hi,
 how to pass internal table values to parameter in selection screen.if is it possible means please sent codeings.
thanks.
stalin.

hi,
tables : mara.
data : begin of itab_mara occurs 0,
 matnr like mara-matnr,
 ernam like mara-ernam,
 end of itab_mara.
selection-screen : begin of block blk1 with frame title text-001.
parameters : p_matnr like mara-matnr.
selection-screen : end of block blk1.
select matnr ernam from mara into corresponding fields of itab_mara
 where matnr = p_matnr.
loop at itab_mara.
write :/ itab_mara-matnr,
 itab_mara-ernam.
endloop.
<REMOVED BY MODERATOR>
Message was edited by:
 Alvaro Tejada Galindo

Passing of internal table values to the select statement as SETS

Hi All,
Is there any way that i can restrict the values of a internal table to be passed to a select statement set by set..
say for eg: if a itab has 1000 entries i want the first 500 to be going out in a select statement as a comparision for all entries and then the next set of 500 to go out..
Please let me know.. this is very urgent..

Appending Several Lines
You can also append internal tables to index tables using the following statement:
APPEND LINES OF <itab1> TO <itab2>.
This statement appends the whole of ITAB1 to ITAB2. ITAB1 can be any type of table, but its line type must be convertible into the line type of ITAB2.
When you append an index table to another index table, you can specify the lines to be appended as follows:
APPEND LINES OF <itab1> [FROM <n1>] [TO <n 2>] TO <itab2>.
<n 1 > and <n 2 > specify the indexes of the first and last lines of ITAB1 that you want to append to ITAB2.
This method of appending lines of one table to another is about 3 to 4 times faster than appending them line by line in a loop. After the APPEND statement, the system field SY-TABIX contains the index of the last line appended. When you append several lines to a sorted table, you must respect the unique key (if defined), and not violate the sort order. Otherwise, a runtime error will occur.
Then u can use FOR ALL ENTRIES in select query.
regards
vinod

IMPORT Statement Issue (Internal Table)

Hi All,
I am using an IMPORT statement to get all the data from other report's internal table. Now whenever this (the other report's internal table) is changed (for field addition, etc), my report throws a dump. Hence, everytime I have to add these fields in my program as well.
Is there any way by which I can include the whole internal table of that report in my program just like
'INCLUDE STRUCTURE VBRK'.
Thanks in advance

Hi, CHeck this code related to your problem..This will helpful to you...
I have done this program earlier..I hope it will helpful to u..
This programa calling the other program to import the data..
Check it out...
*" Tables declarations.................................................
TABLES:
spfli.
*" Type declarations...................................................
Type declaration of the structure to hold data from table SPFLI     *
TYPES:
BEGIN OF type_s_spfli,
    carrid LIKE spfli-carrid,          " Carrier Id
    connid LIKE spfli-connid,          " Connection Number
    cityfrom LIKE spfli-cityfrom,      " City from
    cityto LIKE spfli-cityto,          " City to
    airpfrom LIKE spfli-airpfrom,      " Airport from
    airpto LIKE spfli-airpto,          " Airport to
    countryfr LIKE spfli-countryfr,    " Country from
    countryto LIKE spfli-countryto,    " Country to
END OF type_s_spfli.
Data Declaration...................................................*
     Field String To Hold Flight Details Record from SPFLI          *
DATA
fs_spfli TYPE type_s_spfli.
Data Declaration...................................................*
     Internal Table To Hold Flight Details Records from SPFLI       *
DATA
t_spfli LIKE STANDARD TABLE OF fs_spfli.
TYPES:
BEGIN OF types_s_itab,
    carrid LIKE sflight-carrid,        " Carrier id
    connid LIKE sflight-connid,        " Connection number
    fldate LIKE sflight-fldate,        " Flight date
END OF types_s_itab.
Data Declaration...................................................*
     Field String To Hold Flight Details Record from SFLIGHT        *
DATA
fs_itab TYPE types_s_itab.
Data Declaration...................................................*
     Internal Table To Hold Flight Details Records from SFLIGHT     *
DATA
t_itab LIKE STANDARD TABLE OF fs_itab.
*" Type declarations...................................................
Type declaration of the structure to hold data from table SBOOK     *
TYPES:
BEGIN OF type_s_sbook,
   carrid LIKE sbook-carrid,           " Carrier Id
   connid LIKE sbook-connid,           " Connection Number
   fldate LIKE sbook-fldate,           " Flight date
   bookid LIKE sbook-bookid,           " Booking number
   loccuram LIKE sbook-loccuram,       " Local currency
   loccurkey LIKE sbook-loccurkey,
   order_date LIKE sbook-order_date,   " Booking date
END OF type_s_sbook.
Data Declaration...................................................*
     Field String To Hold Flight Details Record from BOOK           *
DATA
fs_sbook TYPE type_s_sbook.
Data Declaration...................................................*
     Internal Table To Hold Flight Details Records from SBOOK       *
DATA
t_sbook LIKE STANDARD TABLE OF fs_sbook.
DATA
w_checkbox.                          " Checkbox
SELECT-OPTIONS:
s_carr FOR spfli-carrid.             " Carrier id range
                      START-OF-SELECTION EVENT                      *
START-OF-SELECTION.
PERFORM selectq.
                      END-OF-SELECTION EVENT                        *
END-OF-SELECTION.
SET PF-STATUS 'YH1314_030502'.
PERFORM display_basic.
AT USER-COMMAND.
PERFORM ucomm.
*&    Form selectq
    This subroutine retreive data from SPFLI table
There are no interface parameters to be passed to this subroutine.
FORM selectq .
SELECT carrid                        " Carrier id
         connid                        " Connection number
         cityfrom                      " City from
         cityto                        " City to
         airpfrom                      " Airport from
         airpto                        " Airport to
         countryfr                     " Country from
         countryto                     " Country to
         INTO CORRESPONDING FIELDS OF TABLE t_spfli
         FROM spfli
         WHERE carrid IN s_carr.
ENDFORM.                               " Selectq
*&      Form display_basic
    This subroutine displays data from internal table
There are no interface parameters to be passed to this subroutine.
FORM display_basic .
LOOP AT t_spfli INTO fs_spfli.
    WRITE:
      / w_checkbox AS CHECKBOX,
        fs_spfli-carrid,
        fs_spfli-connid,
        fs_spfli-cityfrom,
        fs_spfli-cityto,
        fs_spfli-airpfrom,
        fs_spfli-airpto,
        fs_spfli-countryfr,
        fs_spfli-countryto.
ENDLOOP.                             " LOOP AT T-SPFLI INTO...
ENDFORM.                               " Display_basic
*&      Form UCOMM
This subroutine for at user-command event
There are no interface parameters to be passed to this subroutine.
FORM ucomm .
RANGES :
    r_carr FOR spfli-carrid,
    r_conn FOR spfli-connid,
    r_carrid FOR sflight-carrid,
    r_connid FOR sflight-connid,
    r_fldate FOR sflight-fldate.
CASE sy-ucomm.
    WHEN 'DISPLAY'.
      DATA:
        lw_lines TYPE i,
        lw_lineno TYPE i VALUE 3.
      DESCRIBE TABLE t_spfli LINES lw_lines.
      DO lw_lines TIMES.
        READ LINE lw_lineno FIELD
             VALUE w_checkbox   INTO w_checkbox
                   fs_spfli-carrid INTO fs_spfli-carrid
                   fs_spfli-connid INTO fs_spfli-connid.
        IF sy-subrc = 0.
          IF w_checkbox = 'X'.
            r_carr-sign = 'I'.
            r_carr-option = 'EQ'.
            r_carr-low = fs_spfli-carrid.
            APPEND r_carr.
            r_conn-sign = 'I'.
            r_conn-option = 'EQ'.
            r_conn-low = fs_spfli-connid.
            APPEND r_conn.
          ENDIF.                       " IF W_CHECKBOX = 'X'
        ENDIF.                         " IF SY-SUBRC = 0
        ADD 1 TO lw_lineno.
      ENDDO.                           " DO LW_LINES TIMES
      SUBMIT yh1314_030502_call
        WITH s_carr IN r_carr
        WITH s_conn IN r_conn
         AND RETURN.
      IMPORT t_itab FROM MEMORY ID 'YH1314'.
      LOOP AT t_itab INTO fs_itab.
        r_carrid-sign = 'I'.
        r_carrid-option = 'EQ'.
        r_carrid-low = fs_itab-carrid.
        APPEND r_carrid.
        r_connid-sign = 'I'.
        r_connid-option = 'EQ'.
        r_connid-low = fs_itab-connid.
        APPEND r_connid.
        r_fldate-sign = 'I'.
        r_fldate-option = 'EQ'.
        r_fldate-low = fs_itab-fldate.
        APPEND r_fldate.
      ENDLOOP.                         " LOOP AT T_ITAB INTO.....
      SELECT carrid                    " Carriee Id
             connid                    " Connection number
             fldate                    " Flight date
             bookid                    " Booking number
             loccuram                  " Local Currency
             order_date                " Booking date
         INTO CORRESPONDING FIELDS OF TABLE t_sbook
         FROM sbook
         WHERE carrid IN r_carrid AND
               connid IN r_connid AND
               fldate IN r_fldate.
      IF SY-SUBRC NE 0.
        MESSAGE 'NO RECORDS FOUND'(006) TYPE 'S'.
      ENDIF.                           " IF SY-SUBRC NE 0
      LOOP AT t_sbook INTO fs_sbook.
        AT FIRST.
          WRITE: /5 'Carrier Id'(001),
                 20 'Conn Id'(002),
                 35 'Flight date'(003),
                 50 'Book Id'(004),
                 65 'Local Currency'(005).
        ENDAT.                         " AT FIRST
        WRITE: /5 fs_sbook-carrid,
               20 fs_sbook-connid,
               35 fs_sbook-fldate,
               50 fs_sbook-bookid,
               65 fs_sbook-loccuram CURRENCY fs_sbook-loccurkey.
      ENDLOOP.                         " LOOP AT T_SBOOK INTO.....
ENDCASE.                             " CASE SY-UCOMM
ENDFORM.                               " UCOMM
Regards
Kiran

Doubts with control break statements on internal table loops (AT/ENDAT)

Hi, i've had a couple of doubts for a long while which I hope someone can clarify today:
1) I know how to use the AT statements, however, i'm not sure I get correctly what this part of help regarding this commands means:
"The control level structure with internal tables is static. It corresponds exactly to the sequence of columns in the internal table (from left to right). In this context, the criteria according to which you sort the internal table are unimportant."
I've always sorted the internal table before the control break and it works that way. For example:
SORT ITAB BY EBELN EBELP.
LOOP AT ITAB.
AT NEW EBELN.
* Code for the order header
ENDAT.
ENDLOOP.
If I don't sort the internal table, it doesn't work! (i get dupplicated processing). In the example, if i have more than one register with the same EBELN and they're not consecutive, the header gets processed twice. I really don't get that part of the help text.
2) I know this: "At the start of a new control level (i.e. immediately after AT), the following occurs in the output area of the current LOOP statement:
All character type fields (on the right) are filled with "*" after the current control level key.
All other fields (on the right) are set to their initial values after the current control level key."
My doubt is: WHY is that this way? Because sometimes (most times) I need those fields INSIDE the statement! So when that happened i've solved it in one of three ways:
LOOP AT ITAB INTO WA_ITAB.
WA_ITAB_AUX = WA_ITAB.
AT NEW FIELD.
 WA_ITAB = WA_ITAB_AUX.
* ...Rest of the code for the first register
ENDAT.
ENDLOOP.
LOOP AT ITAB INTO WA_ITAB.
AT NEW FIELD.
 READ TABLE ITAB INDEX SY-TABIX INTO WA_ITAB.
* ...Rest of the code for the first register
ENDAT.
ENDLOOP.
* (Without AT)
LOOP AT ITAB INTO WA_ITAB.
IF WA_ITAB-FIELD <> FIELD_AUX.
 FIELD_AUX = WA_ITAB_FIELD.
* ...Rest of the code for the first register
ENDIF.
ENDLOOP.
Is there any problem with this way of coding? Can be done better?
Thank you very much in advance.

Hi..,
1)
See if u sort the table on a field on which u r using AT ENDAT .. then all the records which are having the same value for that field will form a group or those reocrds will be at one place.. so when u sort the table for all the records AT ENDAT will get executed onli once..
If u dont sort this table on this field then all these records will be at different places and in between there may be records with different value for this field.. so this AT ENDAT will get executed for each record !!
2)
No u cannot use the Right hand fields of the field in the table .. Because these AT events work as Group based operations... So till that field on which AT ENDAT is working it breaks that record into two groups.. One is the left hand fields including that field.. and right hand fields as another group.. and makes the right hand group as stars ****. Thats y u can observe that even any one field in the left hand group changes the AT ENDAT will get executed !!!!
Hope u understood !!!
regards,
sai ramesh

Issue with WRITE statement from Internal Table

Hi All,
I have written the below code in a infoset query, the syntax check is ok & when i run the query in debugging mode, i find the internal table being filled with the values & the write statement outputing the values as well.
But the problem is when i execute the query the output does not show all the lines, instead just displays the last record . What could be the mistake?
Is it because i have defined Y_EBELN, Y_EBELP & Y_OPENQTY as nodes in the Extras Tab of the infoset & have chosen this for display in my query? How to display the output from my internal table in my query output?
Hope my problem is clear, await clarification.
Vivek
Code
types:
    Begin of itab,
      wl_ebeln   type eket-ebeln,
      wl_ebelp   type eket-ebelp,
      wl_openqty type eket-menge,
    End of itab.
Data: il_po type table of itab with header line.
*Display open PO for materials
SELECT EKETEBELN EKETEBELP EKETMENGE EKETWEMNG EKET~EINDT
     INTO (Y_EBELN, Y_EBELP, WL_MENGE, WL_WEMNG, Y_EINDT)
    FROM EKET
      INNER JOIN EKPO
         ON EKETEBELN     = EKPOEBELN
          AND EKETEBELP = EKPOEBELP
      INNER JOIN MARD
         ON EKPOMATNR     = MARDMATNR
          AND EKPOWERKS = MARDWERKS
          AND EKPOLGORT = MARDLGORT
    WHERE EKPO~MATNR = MARD-MATNR
      AND EKPO~WERKS = MARD-WERKS
      AND EKPO~LGORT = MARD-LGORT
      AND EKPO~LOEKZ = SPACE
      AND EKPO~ELIKZ = SPACE.
*Display only still open qty per schedule line
Y_OPENQTY = WL_MENGE - WL_WEMNG.
il_po-wl_ebeln = Y_EBELN.
il_po-wl_ebelp = Y_EBELP.
il_po-wl_openqty = Y_OPENQTY.
    append il_po.
ENDSELECT.
ENDIF.
Loop at il_po.
write:/ il_po-wl_ebeln, il_po-wl_ebelp, il_po-wl_openqty.
endloop.

Hi Vivek,
Try it like this.
Data: Begin of itab,
       lifnr type lfa1-lifnr,
       name1 type lfa1-name1,
       land1 type lfa1-land1,
      End of itab,
      it_lfa1 like table of itab with header line,
      lifnr like lfa1-lifnr,
      name1 like lfa1-name1,
      land1 like lfa1-land1.
select lifnr name1 land1 into (lifnr, name1, land1)
       from lfa1.
it_lfa1-lifnr = lifnr.
it_lfa1-name1 = name1.
it_lfa1-land1 = land1.
append it_lfa1.
endselect.
loop at it_lfa1.
write:/ it_lfa1-lifnr, it_lfa1-name1, it_lfa1-land1.
endloop.
Note:
In place of the above select you insert your join select statement. It is working for me.
You have declared your internal table wrongly. In the internal table instead of TYPE use LIKE, it will work.
Hope this will work for you.
Thanks & Regards
Haritha.

EXPORT STATEMENT fro INTERNAL TABLE VALUES

Similar Messages

Maybe you are looking for