Export still valid after approving updates

Hi,
I am currently in a process of setting up replica servers for each site. I do this with an export of the content and the database.
Yesterday I have approved 5 new updates on my WSUS master server.
My question is can I still use that content + db or do I have to make an export again from the master?
Thanks in advance,
Kr,
Joeri

Hi Joeri,
>>Is the export which is made on the master before the approving still valid if I import those on the new replica server?
The metadata will be overridden at the synchronization. Therefore, the export/import makes no sense. But copying the content folder will reduce the download time.
>>Will the new replica server download the missing files then?
Normally, when the update is approved, the downstream server will download the update from the updatestream server.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

Does the Ipod see the network?
It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the antenna. See:
http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

Aluminum Keyboard still sticking after firmware update

I purchased my iMac last week, and have run all the system updates. The day I bought it, one of the keys stuck momentarily, but quickly stopped, so I let it pass...since one of the udpates I ran later that day was the keyboard firmware update. Today, though, the decrease volume key stuck. And stayed stuck. To get it to stop sticking, I had to shut down the iMac, unplug it, and the plug it back in and reboot. I've searched online here and via google and saw a few references to this firmware update (Aluminum Keyboard Update 1.0):
http://www.apple.com/downloads/macosx/apple/firmware_hardware/aluminumkeyboardfi rmwareupdate10.html
I've downloaded the update, but it tells me it's already been run (it has, I ran it when I bought the machine). I double click the firmware updater in my utilities folder and it tells me I'm up to date... So, what now? Anyone else still having problems after the update? This *****...I finally convinced my wife to make the switch and I end up with a problem that the fix won't fix...
Thanks in advance for any suggestions!
Robert

Did you get it fixed and how? I'm having the same problem with my iMac that I just bought. Now, I'm surfing the net for answers.
I do plan to bring my machine to the nearest service center this weekend. But, if anyone can help, please do.

N97, issues still unresolved after software update

I was happy to see the latest software update from Nokia for N97 hoping it would have solved the issues but I was very disappointed experiencing the same problems that I was getting before and worst part was new problems have also
been experienced.
Old problem which is still not solved
It is still impossible to get the phone working if it switches off by battery getting fully drained. The battery doesn't start
charging even if you put the phone in charging for 24 hours. The charging light blinks but the phone doesnt charge.
New problem after software update
Even if the phone is put on charge for 24 hours, it doesnt get fully charged. Infact the battery indicator doesn't climb up after 2 points and after using the phone for a small time, it says battery discharged and phone switches off.
I have always been stuck to Nokia phones since I've started using handphones but am having the worst experience with
this N97. God knows when the Nokia people will wake up and provide a final solution to this.

Try pulling the battery and leaving it out for 5 minutes. Put back together and commence a recharge. Se if that helps.
Nokia N8 on O2-UK
Firmware 022.014

HT5498 Is this information still valid after one and a half years? Are the lightning-to-HDMI or lightning-to-VGA cables the only available options to send video to a TV set?

There is a relative using an iPhone 5s and is interested in streaming video from her iPhone to an old TV set; unfortunately the TV set does not have either HDMI or VGA connectors; therefore we figured out getting a "lightning-to-30 Pin adapter", plug it to the iPhone 5s and use an old "Composite AV Cable" to do the trick. However, I found this post informing video streaming is not possible through the "lightning-to-30 Pin adapter", but -considering its post date- I would like to know if that info is still valid or if something has changed since then. Obviously changing the TV set is not an option, we have a limited "budget" to solve this.

Thanks for the feedback Rudegar. We're not planning using airplay mirroring using AppleTV, but directly as it used to work with old iPhone 4S. Just attaching the composite video cable (30pin-to-Composite) to the iPhone 4 worked on almost any TV set equipped with composite jacks. Maybe I have to rewrite the question to "...available wired options to send video to a TV set?"

My Facebook and Weather Channel app are still waiting after the update to ios6

Since I updated yesterday afternoon all of my purchased apps are not showing on the wall and two of my apps are still waiting to be updated. I have shut my phone down and restarted it plus logged into FB through my settings.

I just found this post: https://discussions.apple.com/message/16197528#16197528
Apparently, my setup of using a symlink (created in Terminal via "ln -s") for my "Movies" folder in my home directory to a different directory on the same HD had something to do with the problem. I removed the symlink and moved the folder back into my home folder. Then FCPX prompted to upgrade my projects. I'm backing them up now before trying to do that. ;^)
So the bug is apparently that FCPX cannot work correctly with Mac OS's filesystem features… :-(

Unable to export to iTunes after Garageband update

HI everyone. I updated to 2.0.2 after updating to iOS8 and have noticed that I don't have the option to save to iTunes or open in iMovie, two features I used a lot. Is this a mistake?
When I try to email the song I get a warning saying the size is too big to email and try saving to iTunes instead, so I'm thinking this has been accidentally omitted from the update??
ARgh!!!

HI everyone. I updated to 2.0.2 after updating to iOS8 and have noticed that I don't have the option to save to iTunes or open in iMovie, two features I used a lot. Is this a mistake?
It is working for me.
Have you updated all apps after installing the new iOS 8? i.e., updated iMovie?
Have you checked, if you have enough free memory after the update?
Have you tried to reset GarageBand? Settings > applications > GarageBand > enable reset.
If all fails, backup your device and reinstall iOS y restoring: Perhaps the download did not install properly.
See: Use iTunes to restore your iOS device to factory settings http://support.apple.com/kb/HT1414

HT203547 Thunderbolt Display Screen Still Black After Firmware Update

Mid 2014 15" MacBook Pro (retina), and Thunderbolt Display, under 1 year old.
The Display stopped waking from sleep, but it seems to only be the backlight. When using a flashlight, I can see the image on the screen. My computer recognizes the Display is connected.
The firmware update hasn't resolved the issue. The article HT203547 is worthless.
Many, many other similar issues are reported in the apple community forum and in the Apple Online Store reviews for the TB Display.
I've had the Display repaired, having all of the internal components replaced. Now, it's at an Apple Authorized Service Provider, again... for the same issue.
Last time, it was in the shop for several weeks, as the technicians had trouble resolving the issue.
Apple will continue to have it serviced and replace it, entirely, if needed. But, that will have to be after their technicians repair the same parts 4 times. I've barely gotten any use out of it over the past 2 months.
But, if there are inherent flaws... what can be done? Is there any way to get a refund/credit, after 6 months or so?

Hello JethrofromBama,
Thanks for using Apple Support Communities.
From your post I understand that your iPhone's screen has no backlight, and is dark. I'd like you to please follow the steps below in attempt to resolve this issue.
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
Take care,
Alex H.

Burning IMovie slideshow to a disc - still possible after recent update?

Greetings, I've used IMovie to put stil photos and some video into an IMovie slideshow. Previously, I'd used IDVD to burn the slideshow to a DVD, but since the recent update to Mavericks, IDVD is apparently no longer supported by Apple. Question: How does one now burn their IMovie slideshows to a DVD? Also, with friends in Australia and New Zealand (where PAL is the format) to whom I'd like to share the DVD, is PAL format possible? Thanks for any assistance! Phil

In iDVD 1-3, there was good quality up to 60 minutes, fair quality from 61 minutes to 90 minutes. Starting in iDVD 4, you could get movies up to 120 minutes, but the quality degrades with increased running time, starting at about 70 minutes. The quality at 120 mins is still better than the old version's 61-90 minute projects.
To get two movies on the same DVD, start by preparing the first movie the normal way. Then drag the second movie's small .mov file into the iDVD window. You will now get another button for the second movie. Be sure to select "Best Quality" in iDVD first.

G505S still overheating after BIOS update

I have my Lenovo G505s for quite a while now. I am dual booting Windows 8 and Fedora Linux 21. I wanted to play a game a few days ago and my windows shut down ever few seconds. After that I tried to play something on Fedora, but here also the laptop got hot so quickly that I quit the program to not damage my computer. After doing research I found that I'd have to update my bios. I updated it from 2.x to 3.0 and checked if it updated properly (It says BIOS version 3.0 in the BIOS now). This didn't help.Setting the maximal energy level to 95% in windows didn't change anything too (some threads recommended this) I also want to mention that sometimes on windows it didn't just shut down, but the screen got a green-yellowish overlay and it just froze (I will make a picture next time it happens)

the temp is fine, most probably the temp reading is fixed in the new bios update.

CS5 suite on computer still valid after creative cloud upgrade?

I have the creative suite CS5 on my computer given to me from my company. I was one of their computers on the purchase. Now the rest of the team has upgraded to the cloud. When i open my desktop version it asks me for a serial number, and when i input says it is no longer valid. Shouldn't my computer version still work even though they upgraded?
Did the upgrade in validate my programs?

>CS5 on my computer given to me from my company
What kind of license... limited, or "forever" ?
Does your serial number show on your account page?
https://www.adobe.com/account.html for serial numbers on your Adobe page
Anyway, This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Q10 still locked after ad Update.

Hi, i updated my Blackberry Q10 by OTA.
Then a configuration process stated at 100%.
Now, although i reboot the system i cannot start OS.
It's still on 100% without fluctuations.
I need help! Thanks in advance.

How long has it been that way? Is it still that way? If so, you may need to connect to Link and reinstall the OS from scratch.
http://www.blackberry.com/btsc/KB34045
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Logic pro 9 is still crashing after the update

This program that i have been using did not have any problems for awhile now i have change my hard drive and install the program and now i been seeing a lot of crashes
however the program will boot up however when i want to pull up and instrument a rainbow wheel shows up and then it crash it will not show my instrument page and i try to copy the libray and it still will not show the page so i would like someone to give me or share the steps to get back to regular programming

If you don't have an old backup, then there's nothing that you can do. You can still sync your phone back to the PC that you use to sync to get back apps and music.
For pictures you should be importing them over to your PC as you would a digital camera, that way when events like this occurs you can sync the pictures back to your phone. http://support.apple.com/kb/HT4083.
to backup and restore http://support.apple.com/kb/HT1766

My phone says SIM not valid after ios 5 update, Why and how do I fix it?

Why does my iPhone 4 say SIM not valid after I updated to ios 5? Also, is there anything I can do to fix it?

Sounds like your phone was software unlocked, or hacked/jailbroken, to work with any carrier. Updating the phone restored the original carrier lock. All you can do now is contact the carrier it is locked to and see if they have an unlocking policy.
Good luck.

Speakerphone still lame after update

I was just reading a thread on this, but cant find it now. I guess it was deleted.
My speakerphone is still lame after the update, (unless I am in a totally sound free environment). My verizon razr probably has twice the volume.

Hi macu,
Thanks for using Firefox OS and for reporting this issue. Can you tell me your provider or country (in case we have a known bug on this it will help me to find it)?
If you hold the power button and select Restart from the menu to reboot the device, does the notification appear again? If the rest of the system is working and you definitely have v1.1 installed (with the search box on the home screen). It is safe to ignore and should not prevent or block further updates. (But, we will file an issue for it to let the provider and OEM know about it.
Best regards,
Michelle Luna

Export still valid after approving updates

Similar Messages

Maybe you are looking for