Export to avchd with menu, possible ?

Hello,
With pe10, it is possible to export a video to avchd (not dvd, not blue ray) file with a menu ?
Thanks

If you instead "burn" the above files to the hard disk and play them using a computer "DVD player", they look the same as though they were the original video and they have their menus.

Similar Messages

AVC H264 720p60 video with AC-3 asynchronous after exporting as AVCHD using Pre11

Dear community,
I am currently facing a problem concerning asynchronous video and sound after rendering AVC files including H264 codec at 720p60 and AC3 sound as well as multiple stereo tracks.
The video is recorded using Hauppauge Hauppauge HVR-5500HD to record DVB-C.
After editing (only cutting, no effects) and exporting as AVCHD 720p60, vbr 2pass, I get gradually increasing asynchronity. Some exports are at the beginning perfecty synchronous and get more and more asynchronous (until reaching a peak of approximately 5 minutes delay of video at a 2 hours export), others have the delay at the beginning and are perfecly synchronous at the end.
However, that issue doesn't occur with all souce files, only with some random ones! (Unfortunately the most!)
Here is the output of the souce video using MediaInfo (1 example out of many similar ones):
General
ID :
1 (0x1)
Complete name :
anything.ts
Format :
MPEG-TS
File size :
7.95 GiB
Duration :
1h 59mn
Overall bit rate mode :
Variable
Overall bit rate :
9 489 Kbps
Network name :
Video
ID :
2001 (0x7D1)
Menu ID :
5001 (0x1389)
Format :
AVC
Format/Info :
Advanced Video Codec
Format profile :
[email protected]
Format settings, CABAC :
Yes
Format settings, ReFrames :
4 frames
Codec ID :
27
Duration :
1h 59mn
Bit rate :
8 244 Kbps
Width :
1 280 pixels
Height :
720 pixels
Display aspect ratio :
16:9
Frame rate :
50.000 fps
Standard :
Component
Color space :
YUV
Chroma subsampling :
4:2:0
Bit depth :
8 bits
Scan type :
Progressive
Bits/(Pixel*Frame) :
0.179
Stream size :
6.90 GiB (87%)
Color primaries :
BT.709
Transfer characteristics :
BT.709
Matrix coefficients :
BT.709
Audio #1
ID :
2011 (0x7DB)
Menu ID :
5001 (0x1389)
Format :
MPEG Audio
Format version :
Version 1
Format profile :
Layer 2
Mode :
Joint stereo
Codec ID :
3
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Sampling rate :
48.0 KHz
Compression mode :
Lossy
Delay relative to video :
-815ms
Stream size :
137 MiB (2%)
Language :
German
Language, more info :
Clean effects
Audio #2
ID :
2012 (0x7DC)
Menu ID :
5001 (0x1389)
Format :
MPEG Audio
Format version :
Version 1
Format profile :
Layer 2
Mode :
Joint stereo
Codec ID :
3
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Sampling rate :
48.0 KHz
Compression mode :
Lossy
Delay relative to video :
-815ms
Stream size :
137 MiB (2%)
Language :
English
Language, more info :
Clean effects
Audio #3
ID :
2041 (0x7F9)
Menu ID :
5001 (0x1389)
Format :
AC-3
Format/Info :
Audio Coding 3
Mode extension :
CM (complete main)
Format settings, Endianness :
Big
Codec ID :
6
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
448 Kbps
Channel(s) :
2 channels
Channel positions :
Front: L R
Sampling rate :
48.0 KHz
Bit depth :
16 bits
Compression mode :
Lossy
Delay relative to video :
-748ms
Stream size :
384 MiB (5%)
Language :
German
Language, more info :
Clean effects
Text #1
ID :
2101 (0x835)-100
Menu ID :
5001 (0x1389)
Format :
Teletext
Language :
German
Text #2
ID :
2101 (0x835)-777
Menu ID :
5001 (0x1389)
Format :
Teletext Subtitle
Language :
German
Menu
ID :
2000 (0x7D0)
Menu ID :
5001 (0x1389)
Duration :
1h 59mn
List :
2001 (0x7D1) (AVC) / 2011 (0x7DB) (MPEG Audio, German) / 2012 (0x7DC) (MPEG Audio, English) / 2041 (0x7F9) (AC-3, German) / 2101 (0x835) () / 8001 (0x1F41) ()
Language :
/ German / English / German
UTC 2013-08-04 18:00:00 :
de:ZiB 20 / de: / news/current affairs / / 00:15:00 /
UTC 2013-08-04 18:15:00 :
de:Geld schlÈaft nicht / de: / movie/drama / / 02:05:00 /
UTC 2013-08-04 20:20:00 :
de:ZiB Flash / de: / news/current affairs / / 00:10:00 / Running
UTC 2013-08-04 20:30:00 :
de:X-Men Origins: Wolverine / de: / science fiction/fantasy/horror / / 01:45:00 / Not running
UTC 2013-08-04 22:15:00 :
de:Navy CIS: L.A. / de: / reserved for future use / / 00:40:00 / Running
UTC 2013-08-04 22:55:00 :
de:CSI: Miami / de: / reserved for future use / / 00:45:00 / Not running
UTC 2013-08-04 23:40:00 :
de:CSI: Miami / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 00:20:00 :
de:Geld schlÈaft nicht / de: / movie/drama / / 02:05:00 /
UTC 2013-08-05 02:25:00 :
de:Navy CIS: L.A. / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 03:05:00 :
de:Alles Betty / de: / reserved for future use / / 00:50:00 /
UTC 2013-08-05 03:55:00 :
de:Seitenblicke / de: / reserved for future use / / 00:05:00 /
UTC 2013-08-05 04:00:00 :
de:LazyTown - Los geht's / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 04:25:00 :
de:Der MondbÈar / de: / cartoons/puppets / / 00:10:00 /
UTC 2013-08-05 04:35:00 :
de:Nils Holgersson / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 05:00:00 :
de:Servus Kasperl / de: / children's/youth programmes / / 00:25:00 /
UTC 2013-08-05 05:25:00 :
de:Barbapapa / de: / cartoons/puppets / / 00:05:00 /
UTC 2013-08-05 05:30:00 :
de:Jake und die ... / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 05:55:00 :
de:Alles okidoki / de: / children's/youth programmes / / 00:05:00 /
UTC 2013-08-05 06:00:00 :
de:Die Pinguine aus ... / de: / cartoons/puppets / / 00:15:00 /
UTC 2013-08-05 06:15:00 :
de:Anna und die Liebe / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 06:40:00 :
de:Anna und die Liebe / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 07:05:00 :
de:HÈor mal, wer da hÈammert! / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 07:25:00 :
de:HÈor mal, wer da hÈammert! / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 07:50:00 :
de:Dawson's Creek / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 08:35:00 :
de:Der Kaufhaus-Cop / de: / comedy / / 01:25:00 /
UTC 2013-08-05 10:00:00 :
de:Tom auf heiûer Spur / de: / children's/youth programmes / / 00:25:00 /
UTC 2013-08-05 10:25:00 :
de:Alles okidoki / de: / children's/youth programmes / / 00:05:00 /
UTC 2013-08-05 10:30:00 :
de:Disneys Der Fisch-Club / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 10:55:00 :
de:Scrubs - Die AnfÈanger / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 11:15:00 :
de:The Middle / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 11:35:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 12:00:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 12:20:00 :
de:Two and a Half Men / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 12:45:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 13:05:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 13:25:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 13:50:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 14:10:00 :
de:ZiB Flash / de: / news/current affairs / / 00:05:00 /
UTC 2013-08-05 14:15:00 :
de:The Middle / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 14:35:00 :
de:Scrubs - Die AnfÈanger / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 15:00:00 :
de:Scrubs - Die AnfÈanger / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 15:20:00 :
de:Die Simpsons / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 15:45:00 :
de:Die Simpsons / de: / cartoons/puppets / / 00:20:00 /
UTC 2013-08-05 16:05:00 :
de:ZiB Flash / de: / news/current affairs / / 00:05:00 /
UTC 2013-08-05 16:10:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 16:35:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 16:55:00 :
de:The Big Bang Theory / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 17:15:00 :
de:Two and a Half Men / de: / reserved for future use / / 00:30:00 /
UTC 2013-08-05 17:45:00 :
de:ZiB Magazin / de: / news/current affairs / / 00:09:00 /
UTC 2013-08-05 17:54:00 :
de:Wetter / de: / news/current affairs / / 00:06:00 /
UTC 2013-08-05 18:00:00 :
de:ZiB 20 / de: / news/current affairs / / 00:15:00 /
UTC 2013-08-05 18:15:00 :
de:CSI: NY / de: / reserved for future use / / 00:50:00 /
UTC 2013-08-05 19:05:00 :
de:The Mentalist / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 19:45:00 :
de:ZiB Flash / de: / news/current affairs / / 00:10:00 /
UTC 2013-08-05 19:55:00 :
de:Revenge / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 20:40:00 :
de:The Closer / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 21:25:00 :
de:Unforgettable / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 22:05:00 :
de:ZiB 24 / de: / news/current affairs / / 00:20:00 /
UTC 2013-08-05 22:25:00 :
de:Defenders / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 23:10:00 :
de:CSI: NY / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 23:50:00 :
de:The Mentalist / de: / reserved for future use / / 00:40:00 /
I think there could be a problem with the pre-settings!
As i did buy PrE11 only for editing this and similar videos I would be very pleased if someone could help me solve my issue.
(Please don't tell me that I should buy Adobe Premiere Pro or any other version as them are much too expensive for my purpose and as PrE11 should be capable to do that job.)
Best regards

Just tested your suggested codecs. Works fine (at least on a 51s clip).
Only disadvantage: WinTV v7 (shipped with the TV card) refuses to show any image (just black screen)!
Regarding your last post: Details about the audio (a bit more compact)
Audio #1
Format :
MPEG Audio
Format version :
Version 1
Format profile :
Layer 2
Mode :
Joint stereo
Codec ID :
3
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Audio #2
Format :
MPEG Audio
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Audio #3
Format :
AC-3
Format/Info :
Audio Coding 3
Channel(s) :
2 channels
Channel positions :
Front: L R
In the presettings I didn't find a 720p 60Hz 5.1 setting (only with 1080i/p)
Thanks for help again

Adobe Premier Elements 12 - Exporting trimmed AVCHD files from the project timeline, to a separate folder for burning to Blu Ray disc with other software?

Hi, can anyone help please. This is the first time I have used this forum.
I use Premier Elements 12, a PC, 64 Bit, Windows 7, high powered computer.
Just started trimming AVCHD in this software.
I would like to know if it is possible to export trimmed AVCHD files to a folder elsewhere (files which were originally imported into the project timeline), so that I can burn the trimmed AVCHD files (not in 'Project' form) to Blu Ray disc (using another software which I know that works to burn video files to Blu Ray disc).

Kathy
Thanks for the update. Your progress sounds very good.
Premiere Elements 11, 12, and 13 are similar. But, version 13 has significant feature removals and a new Elements Organizer.
So, when viewing or reading tutorials, try to determine the version of the program being used for the tutorials. As I typically write
principles tend to remain the same from version to version, but the features tend to move, change, or be discontinued from version
to version. And, it is frustrating to be armed with principles when you cannot find a feature.
Some Comprehensive Free Resources for version 12.....
http://tv.adobe.com/show/learn-premiere-elements-12/
http://help.adobe.com/archive/en/premiere-elements/12/premiere-elements_reference.pdf
http://help.adobe.com/archive/en/elements-organizer/12/elements-organizer_reference.pdf
ATR Premiere Elements Troubleshooting: Premiere Elements 12 First Look Details
ATR Premiere Elements Troubleshooting: Premiere Elements 12 Daily Discoveries
Please do not hesitate to ask if questions or need clarification.
Best wishes
ATR

Is it possible to export interactive textfields with data?

Hey guys,
I have following problem. I´m creating our variable price list for our customers. "variable" means an interactive pdf for our customers where they can edit the prices, product discription etc.
I can paginate our catalogue with "Easy Catalogue" including all interactive textfields. It looks like this:
https://www.dropbox.com/s/kn81v9db69dx0a7/screenshot_pagination_incl_interactive_textfield s.png?dl=0
The problem now is, when I export it as an interactive pdf, the data of the textfields will not be exported -> Dropbox - screenshot_exported_interactive_form.png
it`s just blank
Does anybody have a solution for this problem. I need the fields to be preset with the data!
Is it generally possible to export interactive textfields with data?
Any idea is appreciated!
cheers from Austria,
Chris

I´m using Easy Catalog http://www.65bit.com/software/easycatalog/
But I think it has something to do with indesign interactive pdf export properties.
What I also tried:
Converted an ordinary textfield with text into an interactive textfield -> then exported as an interactive pdf -> also blank editable field!

Premiere elements 12: how 2 burn video with menu on avchd disk with 1280x720

Hi, I have a source HD video (from TV) in resolution 1280x720/50. In export presets for avchd disk I only can find presets for 1440x1080 and 1920x1080. I'd like to export this video with menus in 1280x720 which is original resolution to AVCHD disk.
How to handle?
Regards, Juergen

Juegen
No version of Premiere Elements lets you produce a DVD disc with or without menus with AVCHD format of 1280 x 720 at 50 progressive frames per second.
The burn to disc, DVD, AVCHD, and Blu-ray are offered as you found them.
You could burn your Premiere Elements 12 Timeline content to a file AVCHD.mp4 (720p50) via Publish+Share/Computer/AVCHD with Presets = MP4 - HD 720p50. And, then burn that file to a DVD disc as data disc if the disc capacity allowed. But you would not have any menus. Disc menus are offered only for burn to disc/burn to folder. And, important, stop markers do not function at playback of the Premiere Elements (any version) AVCHD DVD or Blu-ray disc format on Blu-ray disc.
Please let us know if you need clarification on anything written.
Thank you.
ATR

Can you export as AVCHD if you use "Matched sequence"?

As far as I know, "Matched sequence" means that you will export the file exactly the same as your sequence settings. Adobe says that you can't export to AVCHD, you can only import AVCHD but you have to export to something like MPEG 2.
So what if I export a AVCHD sequence as "Matched sequence"? Will the final export be a AVCHD file or something different?
How do I check if the exported file is a AVCHD file?

Where it says "Format" that would be the exporter you'd want to use from Premiere Pro or AME.
1.Youtube.
Format: H.264. There is a preset for YouTube 720p that you can use as a baseline; increase the dimensions to 1080p, change the frame rate, and I set the bit rate to 8mbps target/10mbps maximum for my YouTube 1080p uploads. Save this as a preset so you can reuse it later.
2.Delivery for TV broadcast.
That's hard to answer; every broadcaster will want different deliverables. You'll need to check with their requirements. I deliver everything from H.264 MP4s, Avid MOVs, DV AVIs, and HD MPEG2 files--it's sort of a mish-mash so it's not really possible or practical to give you a set number of parameters for this one.
3.Archival use on my computer.
You could use an uncompressed AVI or MOV (Format: Microsoft AVI/QuickTime, Codec: None), but they will be very large files. Why not just keep the footage and the project file? You could also try a lossless codec like the Ut Video Codec Suite or (my preference) Lagarith Lossless Video Codec. Both are free, Windows-only, and appear as codecs under Microsoft AVI. They're both good; they'll be big files as well, but not quite as big as uncompressed.
4.To burn to DVD.
5.To burn to blue ray.
Premiere Pro has specific exporters for both of these; check out Format: MPEG2-DVD for DVD and Format: MPEG2 Blu-ray or H.264 Blu-ray for BD. You can also just send your sequence to Encore and let it pick the best settings based on your desired output format; select your sequence and go to File > Adobe Dynamic Link > Send to Encore.
6.To upload and sell the footage on a website like shutterstock.
Just like #2 above, you'll need to check with the specific stock service what their requirements are. They should be pretty simply spelled out, and then you can choose the format and codec based on those requirements. Googling for the particular service and other users' experiences would help, too.

Export to excel with formatting was autowrapping text in a cell

Export to excel with formatting was autowrapping text in a cell without having to check the can grow option. When the can grow option is checked it does wrap the text however it spans multiple rows, which causes complications when trying to sort.
It worked in:
ProductVersion=10.0.0.533
ProductName=Crystal Enterprise 10 Embedded
Doesnt work in:
Crystal Reports 10.0 Service Pack 6
After the upgrade the reports did not autowrap, b/c the "can grow" option was not checked. I believe this was fixed by "ADAPT00305137 Patch ID: 36479914
Description:
When users export to Excel 97-2000 with the page-based format, text fields are wrapped, even when the "can grow" feature in the
Designer is turned off." . After we turn the option to grow on it does wrap however it spans across multiple rows. So I guess my question is there a way for it not to span multiple rows when wrapping text?
Edited by: dforde on Jan 27, 2010 11:12 PM

I could be wrong, but I believe the export to excel option exports the database values, and the export to HTML exports the values seen in the sheets. If the database values are stored as seconds, the Excel will see them as seconds, and the data will have to be formatted properly in Excel.
I haven't toyed around with Excel exports that much, but it might be possible to set up a template or macro in excel that would have the proper formatting, and use it when opening the Disco export.

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

Okay, Even if i remove the scene numbers from Story and export the file to Final Draft 8. The format in incorrect. The "transitions" ex. CUT TO: are not in the correct allignment. Also there are numbers on each of the dialogues
Pretty much alot of the formatting is not the same. Spaces that break dialouge and action which are there in Story, are not converted over to Final Draft.
Please fix this as soon as possible.
thanks,
Rohit

Exporting a slide with video content

I started a slide show in keynote. A few of my slides have video content. I am trying to export my slides so that I can edit them in iMovie. It's harder than I thought. When I export it, the video content does not play because it exports a picture of the slides. How do I export my slides with video content so that it still plays when I bring it to iMovie. I already tried making that slide a Quicktime movie with no luck. Maybe I missed something in that process. Thanks for any help you can provide.

You need to export from Keynote as Quicktime using either Fixed timing (in which case you specify enough time per slide for all the builds to complete) or using Recorded timing.
You can read more about the different Quicktime Export options in the Keynote help menu: http://docs.info.apple.com/article.html?path=Keynote/5.0/en/kyntc6c24df4.html
Hope that helps.

Exporting to pdf with textboxes, having RTF enabled

I'm doing a lot of documents with editable text fields, but I can't seem to export to pdf, so that its possible to write in the fields with subscript and superscript in acrobat reader.
I need to export the fields with Rich Text Format enabled. Is that possible?
regards
Christian

Form features in ID are pretty limited and advanced text formatting would need to be added in Acrobat after export, but I'm not sure waht you want to do is supported even there.

Exporting a template with multiple images

Let's assume I want to have a large print made at an outside commecial lab because my printer does not handle the size.
In the Print Module, is there a way to export a template with multiple images so that it can be sent to an outside lab for printing?
Or, is this not possible and I would have to design the template in Photoshop and send the file to the lab?
If Lightroom is not yet capable of this, it certainly seems like a worthwhile feature.

Thanks for sticking with this thread to help me.
I am on Windows and I do have PDF capability, the full Adobe Acrobat Professional.
I have been experimenting with your suggestions and, yes, saving it as a PDF and bringing it into Photoshop is a workaround. The images and Identity plate come into Photoshop as they appear in the template in Lightroom.
What doesn't appear in Photoshop is the whitespace(margins)around the images. They appear in the PDF, but they don't appear when I open the PDF in Photoshop. Is there a setting I'm overlooking in the PDF settings dialog that will correct this? Or, is this just the way importing a PDF works when it comes to margins? Must I always go to Image/Canvas size to get the canvas I want? Is there a way of not having to do this?

Exporting a table with Long datatype col. name

Hello,
I need help exporting a table, One of the column is long datatype.
How can I do this without using Export Util?
Is it possible.
(If someone has a solution then PLEASE Email
me)
URGENT.
Thanks.
Pankaj Patel.

Just wanted to find out, if you already solved this problem. I have a similar issue with long column. I am trying to sql dump a table with long column that will be imported into another database(probably using sql*load), but the spooled file puts the data from the long column in separate lines 80 char long and not on a single line. I have set the long to 64000 and linesize to 32000. Wrap is on too.
null

Keynote export to Quicktime with automaic slide settings doesnt work.

I made a Keynote presentation with automatic settings.
All the animation and slides are going automatically from the beginning to the end, I dont have to click.
But when I want to export it to Quicktme movie, it looses all the automatic settings and doesnt fit the background music .
Would be good to export the movie with the original settings, because it fits/syncronized to the music only with this settings.
How can I keep all the slide/animation settings during the export to QT movie?
Thanks

Thank you!
But I think its not an issue, and I found the solution!
You have to make a Slideshow Record first, with your automated settings/transitions, from the begining to the end: Menu-Play-Slideshow Record
After when you are ready, go to Export-QT Movie, and CHOOSE the SLIDESHOW RECORD, NOT the Self Playing option with the preset timings in the export dialogue box.
With this you can create a QT movie with your automatic settings/sliding/transitions.
For me its working.
=)
Hope I help to anybody!

Export to avchd with menu, possible ?

Similar Messages

Maybe you are looking for