Export to comressor 2 failed

I tried to export to compressor numerous times, the dolby sound was OK but video failed. I noticed that the timeline had 2 ins and 1 out markers. I never seen this before. Is this caused the failure?
Thanks,

The sequence settings are DVNTSC 720x480. I have done 100s of jobs, never had a problem. This project is 2.5 hours long. I divided in two parts. Exporting the first Part 1.25 hrs I had no problem what so ever. I marked the second part in and out, and the video portion failed 4 times. I tried to mark in and out just 15 minutes of the timeline and it was OK. than I increased to 25 minutes... it was OK. But If I take the whole second portion of the timeline it fails.
Could it be these possible causes:
1. Exporting to external drive (but the first part was OK)
2. 2 of the chapter markers name had + sign for example speech+Interview
3. Maybe some other issues in the timeline.
Why the compressor doesn't have the cause of the failure?
My next step will be to create a self contain movie and try the compressor.

Similar Messages

Creation of the export data source failed

trying to activate ods but getting this message that the creation of the export data source failed.
and it also gives message that RFC Connection to source system is damaged===> no metadata upload
Please can someone help me with this.
Thanks in advance.
Michelle

Hi,
Check ur source system connection. by going to RSA1-> Source System-> right click and then select check.
U will get the info about the source system Connection. IF RFC has failed then better be in touch with ur basis.
Or try restoring ur source system connection by
Source system-> Restore.
Its sets all the default conenctions b/n ur systems.
Once again check the connection now. if it says ok.. then try do the export data source and then assign the data source to info source and then maintain the Update rules..
Hope this helps-
Regards-
MM

Export to PDF fails for some reports, but report viewer works

Hi all
Our application produces several different reports.
- Report A can successfully be viewed in the ASP.NET report viewer control and can be exported to PDF
- Reports B and C can successfully be viewed in the ASP.NET report viewer (all pages), but export to PDF fails with a very unclear error message. The stack trace is attached below.
Two days ago, reports B and C have fully worked, and I'm sure by 100% that the report templates haven't been modified since then.
Can anyone explain what is going wrong? Is there some internal logging inside Crystal Reports that can be investigated to find out about the reasons of the error?
Any help would be greatly appreciated!
Thanks
Kuno
PS.: The Crystal Libraries under investigation are quite old. In fact, it is a very old application that still runs under .NET 1.0.
CrystalDecisions.CrystalReports.Engine.ExportException: Fehler in Datei C:WINDOWSTEMP     emp_b9cf0dd0-8964-4ddf-ba09-0daaa4e1ef20.rpt:
Fehler von Export-DLL gefunden:
   at u263B.u263BJ(String u2660§, EngineExceptionErrorID u2660u25AC)
, Int32 u2660u266B)Int16 u2660
   at u263B.u263BD(Int16 u2660u2640)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
   at AdamsClient.Web.EngineerClient.TolerancesReportPage.btnSpecPDF_Click(Object sender, EventArgs e) in D:ProjektexxxxAdamsII SVNDevelopmentS
ourceAdamsAdamsClientWebEngineerClientTolerancesReportPage.aspx.cs:line 496
   at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
   at System.Web.UI.Page.ProcessRequestMain()

Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk

IMP-00010: not a valid export file, header failed verification

Hi everyone,
I am new in oracle's world, and I've been working with an export from a sun platform, and I try to import to a windows platform. I've been receiving this message error
IMP-00010: not a valid export file, header failed verification
Please, help me I have to finish with that today..
Thanks and have a nice New Year

thanks for your answer.
sorry, but I don't have all exact information, because that export is comming from a client, and I don't know all information. I only know that the platform is sun.
I received the file via an usb memory, directly from the source.
I've been read that if you make an export in sun platform and it isn't as binary when you transfer it to a windows platform, it will be corrupt.
Could you confirm me that?

Keynote export to Quicktime fails with any animation

I'm making recordings of Keynote slideshows, and I keep running into the same problem: any time I include an animation, of any sort, the export to Quicktime fails. Any advice?
Specifically, regardless of the format (whether it's an animated GIF, a Quicktime movie, or ???), I have the animation set to begin immediately, on transition. I can see it animating while I'm talking. When I export it to Quicktime, my voice continues, but Keynote remains stuck on the first frame. Sometimes it does animate a little bit, toward the end of the time that I'm on the slide, but regardless, voice and video sync are way, way off for the rest of the movie.
Has anyone else encountered this and fixed it? I've seen one person be advised to export using fixed timing, but that's not an option for me: the amount of time I spend on the different slides varies quite a bit.

Yeah, it's pretty simple- with your keynote slideshow open, just open quicktime player, go to "file" then "new screen recording". A little box will open with a record button. Press record, and then play your slideshow in keynote from the beginning. You will have to wait and let it record in real time. After it is done, it will prompt you to save it as a quicktime movie. Then you just have to open iMovie, click "import" and then select the quicktime movie you just made. Then click the musical note button on the lower right, select the mp3 of the VO track or music that you want to use, and drag that onto the timeline. You should right-click and select "detach audio" so you can move it around and get the timing you need. Then just "finalize project" and you're done! Easy-peezie.
And I have no idea about future keynote updates...overall it's a nice program but the exporting problems definitely need to be addressed.

PDF export from Pages fails "Print - error while printing"

Every month I have been generating PDF versions of my invoices by using the 'export' function of Pages. This has always worked fine without any problems.
Today (end of Feb 08), the pdf export function always fails with 'Print - error while printing". A pdf file is saved to disc but it is corrupted and unreadable. I can still export as rtfd.
I don't see anything about this in the logs, but I do notice that there was a Pages software update to 3.0.2 earlier this month.
Anybody know how to fix this?

Hello
Before re-installing, it may be useful to
a - repair permissions with Disk Utility
b - trash the preferences file: <bootVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.plis t
if it's not sufficient, try to print from an other user account.
If it works this way, you will know that the application's files are not the wrongdoers as every account calls the same application file.
Yvan KOENIG (from FRANCE samedi 1 mars 2008 15:33:41)

I just updated my Indesign to CC14 and now I cannot export to anything - Failed to export PDF file

I just updated my Indesign to CC14 and now I cannot export to anything - Failed to export PDF file@

No error message it goes through the actions and then in the background task it shows error. I have tried to export to pdf, jpeg anything and nothing is product. I have tried highquality, low quality settings (all of them) and nothing.

Export to Text failing when Report height is more than 23 inches

I have a problem while exporting to Text, when report height is more than 23 inches. It's failing with "an unhandled exception occurred in crw32.exe [3856]"
Both Crystal Reports 2008 and Crystal Reports XI Release 2 are failing. Export to PDF is working fine.
I am trying to design a lengthy report and export to text.
I searched in forum with out any results.
It would be great, if some body can point me in right direction. Thank you.
Regards,
Raveendra

Hi Raveendra
To work around this error message, disable DEP by performing the following steps:
1. Click Start > Settings > Control Panel.
2. Double-click 'System'. The "System Properties" dialog box appears.
3. Click the 'Advanced' tab.
4. Click 'settings' under 'performance'.
5. Click the 'Data Execution Prevention' tab
6. Select 'Turn on DEP for all programs and services except those I select:'.
7. Click 'Add'.
8. Browse for the application CRW32.exe. This file is located in:
C:\Program Files\Business Objects\Crystal Reports 12\
9. Select CRW32.exe and click 'Apply'.
10. Click 'OK' to close the 'System Properties' dialog box.
11. Log on as an Administrator and start Crystal Reports.
Now try to export report to the text format and observe the behavior.
Regards
Girish Bhosale

Exporting to PDF fails for a report

Hi,
One of my reports no longer exports to PDF. When run through our ERP system it looks as if it's exporting but the progress popup window quickly dissappears. When we go to the location where the exported file should be nothing is there.
I tried opening up the report in the Crystal 11 and exporting from there. I get the following two error messages:
Failed to export the report.
Not supported
This was working yesterday. The only thing I did was to add the u2lbar.dll to the bin folder and copy over the barcode font so that we could display barcodes on this report. However, even if I comment the line to do the barcode I still get the same problem.
Thanks,
Jon

The font you are using probably doesn't have embedding permissions.
hth,
- Ido

Export to .pdf fails.

Tar 6388351.992
Customer is on DBI 7.0.1 and XML Publisher 5.0.0
DBI uses XML publisher to export to .pdf.
When trying to export reports to PDF, the customer gets an
"Exception in Process Method Of FOProcessor "error message.
This does not occur when exporting to Excel.
After setting up a trace we got the error message:
[070507_112246550][][ERROR] Failed to load the image:
http://nadine1.orange.cm:8000/237/OA_MEDIA/bisorcls.gif
The problem is this URL
http://nadine1.orange.cm:8000/237/OA_MEDIA/bisorcls.gif
It should be
http://nadine1.orange.cm:8000/OA_MEDIA/bisorcls.gif
The customer has checked and this one without /237 in it works.
The customer's <db_servername> .XML file and <appl_top>/admin/adovars.env
both show the correct setting for OA_MEDIA and he has run autoconfig again.
Does anyone know where this misconfiguration could be
coming from.

Hi
Please use the internal mailing list for XMLP questions the forums are meant for customers not support or development.
That said, as I remember the integration, XMLP just generates the ouput. the DBI module is in charge of where its put and how its accessed. Id suggest asking the DBI dev team for some help.
Regards, Tim

Macs: Export to Word fails

Take one simple Word file containing one line...
     simple document.
On MacOS I'm using Word 2008.
Export this file as a PDF - this appears to use the native Mac PDF export.
Open PDF with Acrobat DC and attempt to export as a Word - or any complex format.
I get the dreaded
Save as failed to open this document
No file was created.
This works on one of my machines, and fails on another. There are no problems with file permissions because I am working on the Desktop.
Is there ANY log which tells me why this is failing? There appears to be nothing in the system log.
I don't seem to have the option of repairing the installation which some people ask - it's not in my Help menu.
Re-installing from Creative Cloud seems impossible without losing Acrobat completely - which doesn't seem to be good engineering - what happens if I cannot get it back?
Anyone with good ideas about
a)     why this fails?
b)     can I stop it happening?
This is Yosemite BTW.

Thanks for this. However, after some experimenting, I found the SAME file exports on my laptop but not my desktop. So this is not the file format. It's the installation - OR some library that Acrobat is using or failing to use or it's processor related. Both Laptop and Desktop are running 10.10.3 and are at identical update levels.
The lack of any diagnostics from Acrobat doesn't help either. Is there some preference which says Tell me everything that is happening?
Now if Creative Clould allowed me to either verify an installation OR update one - without removing the old one - I might be able to cure it. CC should allow me to re-install anything, just in case.

Export to Word fails

Most of my help projects are exported to Word at some point
for editorial review. This works fine except on one project. When
exporting this problem project, the process fails on any number of
topics and always with the glossary. It looks like the project is
damaged in some way, though it builds fine as Web help and HTML
help. here's what the log says:
Warning: The Word Document became corrupt when attempting to
append a malformed topic: mytopic.htm'
Failed to process 'mytopic'...
Fatal Error: Word Document got corrupt. Abort building
'References'.
Failed to build 'References'...
Failed to build 'References'...
Failed to build one or more chapters.
Building 'Glossary'...
Failed to build 'Glossary'...
I've replace 'mytopic' but the errors remain. The source code
does not seem to be the problem. also, the export fails on various
other topics too. If I exclude the glossary the export fails anyway
on any number of topics. As soon as an error occurs, Word fails to
respond. The only way out at that point is to kill the applications
via Task Manager.
The project is huge - about 1000 topics and plenty of
hyperlinks between them. I don't want to have to import them into a
new RoboHelp project unless all the links remain intact.
I am using RoboHelp 5.02x on Windows XP on a computer with
ample resources.
Any suggestions would be very welcome!
googun

You could also create several SSLs, each of which generates a
portion of the project. If you have topics grouped into folders,
even better.
If you must have a single document, then just append all the
Word docs after running all the SSLs (and by the way, you can batch
generate any combination of SSLs).
Good luck,
Leon

Export to Excel Failed - Unexpected Error

I am trying to export a PDF document to Excel. The PDF uploads no problem but then the exporting process takes several minutes before ending with an error message. Export failed, unexpected error. Please advise.

Justin,
You are fine! Believe me - I get it. And it's my fault I have not been able to get to these fast enough. But I'm getting there!
I hope to have an answer for you by tomorrow.
Have a great day!
Stacy

Export release build failed with an error message: complilation failed while excuting : compile-abc

I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem. But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc.
I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
Here is the command line:
compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?

Still having similar issues - seems to be when I embed an image - but works for every release except for release build
Tried your work around but doesnt seem to make a different
[Embed(source = "/../assets/[email protected]")]
protected static const ATLAS_IMAGE:Class;
[Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
protected static const ATLAS_XML:Class;
[Embed(source = "/../assets/iconMap.png")]
protected static const ATLAS_IMAGE_LOW_RES:Class;
[Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
protected static const ATLAS_XML_LOW_RES:Class;
if(Starling.current.viewPort.width > 320)
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));
}else{
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));

Flash Builder Export Release Build Fails

I'm having an issue when trying to export the release build of my AIR application in Flash Builder 4.5. After choosing the key to sign the package and clicking finish to complete the export, it errors saying that "Error occurred while saving the project settings: "default" build target cannot be found for the selected project." I've included the error message output to the log in the .metadata folder. Any help would be great as this is baffling to me.
!ENTRY com.adobe.flexbuilder.project 4 43 2011-05-10 15:56:11.432
!MESSAGE Failed to get build target settings: default
!STACK 0
java.lang.Exception
    at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1009)
    at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
    at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
    at com.adobe.flexbuilder.project.ui.utils.ProjectBuildPackagingUI.doApplySettings(ProjectBui ldPackagingUI.java:754)
    at com.adobe.flexbuilder.project.ui.utils.ProjectBuildPackagingUI.applySettings(ProjectBuild PackagingUI.java:781)
    at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionBuildPackagingPa geContent.saveSettings(ExportReleaseVersionBuildPackagingPageContent.java:131)
    at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionBuildPackagingPa ge.saveSettings(ExportReleaseVersionBuildPackagingPage.java:84)
    at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:144)
    at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:811)
    at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:430)
    at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
    at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:234)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4066)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3657)
    at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
    at org.eclipse.jface.window.Window.open(Window.java:801)
    at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
    at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
    at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
    at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
    at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4066)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3657)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2640)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2604)
    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
    at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1407)

Take a look at .actionScriptProperties file, there is <buildTargets/> tag. Ideally it should look something similar to
<buildTargets>
    <buildTarget buildTargetName="default">
      <airSettings airCertificatePath="" airTimestamp="true" anePathSet="false" version="1">
        <airExcludes/>
        <anePaths/>
      </airSettings>
      <actionScriptSettings version="1"/>
    </buildTarget>
</buildTargets>
Changing this when FB is open wouldn't help. You would need update the file, while project is closed or flash builder is closed.

Export to comressor 2 failed

Similar Messages

Maybe you are looking for