Export to FLA results in white page

Hi,
Not new to InDesign but completely new to the export to FLA function. I would like to have some interactive InDesign features as HTML5. I read in several posts this could be done by exporting to FLA and from within Flash export to HTML5
Everyone seems to do it. But I feel stupid as can be. Whatever I make in InDesign (5.5 and CC) with an interactive feature (Fly inn from left) exports and shows a blank page in Flash. Why?
Any ideas are welcome.
Thanks.

Sorry for the delay, my head was stuck in another project.
What I try to do is this:  http://www.adobetrainer.co.uk/indesign-tips/indesign-how-to-create-html5-advert.html
Now it refers to Walliby. That is now linked to a Flash page.
I saw the same in a 'whats new in InDesign' movie. Where InDesign animation worked in Flash. Indeed a page per frame, but still, working.
The only way I can get a page visible, is to rasterize it. But then, its just a picture. (duhhh ;-))
Setting:
On pageload
flyin from left
duration 12 seconds
Play 6 times
Any thoughts why I endup with a white page?

Similar Messages

Export Next Page Zoom and Search Issues - blank/white page freezes report

I'm using a vendor product that uses Crystal Reports Viewer for .NET v13.0 on a 64-bit windows 2008 server.
Everthing works fine in the vendor's environment but when I installed it on my servers when I try and Export, click next page, zoom or search I get a plain white overlay over the normal UI and it freezes the report.
Specifically if I click the export icon for a split second I can see the export dialog show up but it's immediately covered up by a white page that is the same size as the export dialog. The rest of the report is shaded gray as normal but it freezes that way. If I click on the gray area then hit ESC it goes back to normal, but I can't export anything.
Same basic behavior when I click Next or try and search for text. A small progress window shows but is white only then, I can't hit ESC and have to close the report out.
With zoom if I click on the zoom drop-down I see the zoom choices for a split-second but it's again covered over by whiteness.
I've searched through this forum quite a bit and can't find any similar issues. I can see all other graphics just fine and this same server was working fine with the 2008 version in the past. Are there any temp directories or special permissions required?
Thank you!
Tony.

Hi Tony,
If it is an install issue there should be a log folder that may indicate if there was a problem.
They really need to dig into the problem, if they have questions pass them along or if they have support with us they can create a case to help debug the issue.
You may want to search hear also, there have been a few post on this question but not sure what the results are.
Thanks
Don

MF8280CW scan result is a white page

Hey everybody, hey Canon !
I'm having a serious trouble scanning with my brand new Canon i-SENSYS MF8280CW and I was wondering if someone else is experiencing or has experienced any similar issue : all scanned documents are white, no content shows on the scanned file, whatever the employed scanning method is (scan through dedicated software, scan to PC or scan directly to an USB stick).
On one hand, scanning through Mac OS Preview or through MF Toolbox gives white pages. Same thing happens if you ask the printer to send the document directly to your hard-drive (scan to PC).
On the other hand, the printer doesn't recognize any USB sticks, I tried all USB sticks and external hard-drives I own, some formatted in NTF, other for Mac OS. No result. They all work otherwise.
Even scanning through a USB cable results in a white page
I spoke 3 times with the hotline and all they say is that I need to install the most up-to-date drivers. But I do have the most up to date drivers and everything works just fine except for the scanner : http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/color_imagec...
My configuration : Mac OS 10.10 (Yosemite) and Mac OS 10.9.5 (Macericks) : I actually have both and unfortunately the results are strictly the same
Is there any diagnostic tool to run on the printer ? Is it possible it's a hardware issue ?
Thanks in advance for your help !!

I confirm, it wasn't a driver problem!
After many many calls to the hotline over two weeks (and several tweets), Canon finally accepted to send a guy to check the printer and try to repare it. He wasn't able to figure out what was wrong, and he ordered a replacement mothernoard. I waited for a month or so without any news, called several times in the meanwhile, and finally they told me then tought the problem was resolved... ?!!
Finally, the repare guy came and try to inslall the motherboard, but it wasn't the right model for my printer ... Finally, after some more calls and tweeting, they finally agreed to send a new printer that now works just fine. The whole thing took 2 months...
Of course, I'm very disappointed... I could understand that occassioally, due to a human error, a customer could fond himself in my situation, but Canon didn't even try to apologize. For the last 20 years, I've bought several printers and digital cameras, the next time I might consider trying something else.
Hope your problem will be solved soon !

Search results are blank white pages?

Ever since the last upgrade Firefox/3.6.10 ( .NET CLR 3.5.30729) I am having constant trouble with blank white search results. Also, pages load and are white and blank and it shoes the staus as done. I am ready to jump ship. Any fixes? Thanks

See [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
Open the Media tab of the "Page Info" window.
Select the first image and scroll down though the list with the Down arrow key.
If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

When I export PDFs from Illustrator CC my files are coming out as white pages.

I've never had this issue before. I recently updated to Mac OS Yosemite and now this is happening. Mac OS Preview will see the files as created in Illustrator, but Adobe Acrobat will open them as White Pages.

Save as>PDF>Illustrator Default (I've also tried High Quality Print)

InDesign printing to PDF results in white "highlight" effect behind PLAIN black text.

InDesign printing to PDF booklet spreads results in white "highlight" effect behind PLAIN black text. There are no text effects like drop shadows or transparency. Some of the text is in it's own shape above a semi-transparent shape, but not all.
Exporting to PDF does not cause this problem, just printing to pdf. I cannot use the exported pdf as I need the full booklet spreads. Help!

In addition to vinny38's advise to not print to PDF, you may not even need printer's spreads, unless you are printing this yourself. If you are sending this off press, the prepress team will want to do the imposition themselves. If you are printing to a network copier, some have the ability to do booklet printing from a multi-page PDF saved in single-page reader's spreads (one page for each page of the document, rather than two document pages for each PDF page).
If you do need to print this yourself and if you have to impose it in InDesign, consider making a new document and placing the pages of your original document onto the pages of the new document, the way you would place any other images. You can decide where the pages have to go in order to get printer's spreads, and when you're done imposing, export as a PDF and print that PDF to your printer. You will get a better-quality PDF than printing to PDF.

How to get rid of blank white page next to cover page when converting an indesign file into a pdf flip book

Hey Everyone,
I created an catalog using indesign and now I want to convert that into a pdf flip book. I have exported it as a SWF then changing the SWF back into a pdf. It works great however, I keep getting a blank white page next too my cover page, and I really don't want this. I find it very distracting and visually unappealing. Is there any way to get rid of this blank white page? Or any other suggestions on how to create a flip book out of an indesign file.

It sounds as if you're not checking the pagination properties of the chapter after the problem within the book file.
The book file settings always trump the component file's settings.
So this would mean that, if Chapter 3 is set in the book file to start on a Right page, the book enforces this by adding a blank page to Chapter 2.
You should be able to fix this by selecting all the component chapters in the book, right-clicking and setting all the pagination properties to start on Next Available page, but I don't have 7 on this system so I can't give you the exact key strokes.
Art

Having trouble with my PHP code. Appers to get stuck on a white page.

HI all,
I have just began having trouble with my PHP code. Was working before and haven't made any changes to the code since last time it worked.
What happens is after the form is submitted it goes to a white page (no text just all white page) and in the address bar it has the path for my php page. what supposed to happen is either it goes to a success page or a error page.
I've had a problem where the info entered is correct but was directed to the error page. i managed to fix that issue but i am puzzled what is happening to my php page now.
Mind you that i didn't write this code i just took over the responsiblities of this website and i am hopping that its a quick fix.
I appreciate any help you could give me. Thank you.
CODE:
<?php
 $to = '[email protected]';
 $from = '[email protected]';
 //Make sure we have some info posted from the form...
 if (isset($HTTP_POST_VARS)){
 //Clear the body of the message to be sent
 $body = '';
 //go through all POSTed variables sent
 while (list($key, $value) = each($HTTP_POST_VARS)){
 if($key <> "Submit" && $key <> "submit") {
 $body .= $key . ' = ' . $value . "\r\n";
 //Now building mail headers.....
 $headers = "From: ".$from."\r\n";
 //Mail message
 $success = mail($to, "Email Club" . date("m/d/Y"), $body, $headers);
 // CURL stuff.....
 $ch = curl_init();
 curl_setopt($ch, CURLOPT_FAILONERROR, 1);
 curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1);
 curl_setopt($ch, CURLOPT_TIMEOUT, 4); //times out after 4s
 curl_setopt($ch, CURLOPT_RETURNTRANSFER,1);
 if ($success){
 //readfile('http://www.lvpaiutegolf.com/thankyou.html');
 curl_setopt($ch, CURLOPT_URL,"http://www.lvpaiutegolf.com/thankyou.html");
 header("Location:http://www.lvpaiutegolf.com/thankyou.html");
 else{
 // readfile('http://www.lvpaiutegolf.com/error.html');
 curl_setopt($ch, CURLOPT_URL,"http://www.lvpaiutegolf.com/error.html");
 header("Location:http://www.lvpaiutegolf.com/error.html");
 // Output
 //$result=curl_exec ($ch);
 //curl_close ($ch);
 //echo $result'";
?>

Insert the install disk and boot from it. Use disk utitlity to repair your drive and check for errors (report any errors back here) then reinstall the os. This should not erase your data.

Exporting to SWF: embed SWFs on pages?

Hi there
I've been experimenting with the export to SWF option in ID CS4. I was hoping I'd be able to place individual SWFs on each page of my ID document and then export the whole document as a sinlge SWF, giving me a nicely interactive publication. The SWFs that I've placed on the pages don't play in the final document, though.
Any ideas about fixing this?
I've looked at all the Movie Options for the SWFs that I've placed and the options available at export and nothing seems to have helped.
I'd appreciate any thoughts.

I was hoping to take advantage of InDesign's page transitions to present the SWFs, but it looks like I may have to work out how to do it all in Flash instead.
I do a lot of Flash work but have only briefly experimented with the ID exporter, so there could be something I'm missing. I'm guessing to get what you are after to work will be difficult depending on your ActionScript skills. Unfortunately when you export an fla, the fla does not include the transition code—your pages get placed sequentially on the timeline with no transitions. There is the bitmap representation of the swf and it wouldn't take much to load your swfs into position, but you'll have to build your own page flip transitions.

Utilizing APEX 4.2 mobile picture upload issue, undefined white page.

1 Use your phone (I have iphone)
2 go to http://apex.oracle.com/pls/apex/f?p=64562 in your browser demo/demo4u
3 type a number in for the id (PK)
4 click load image
5 take picture
6 choose use
7 wait for load to server
8 click create
9 after create, click download
10 results in a blank white page with the word undefined.
If you remove the reference on the end of the url you can get the picture to show. This does not go over very well with customers.

I made the change and the problem still exist. Give it a go.
The odd part is that after you get undefined, if you do a refresh of the page the picture shows up and you get stuck in a strange state of hitting the back button that eventually lands you back on a application page.
Nice, but not something I could move to production.
Thank you for your time ;-)

Printer regonizes Black/white page as color page

When we print a Word document to a PDF file with the Acrobat printer, pages that contain only Black/White information but with an image that looks as if it is Black/White, the printer recognizes the page as a color page. When we print this page with Word directly to the printer, the page is recognized as a Black/White page.
Are there color setting available which control the setting for gray scale images to be printed Black/White?

Leo,
choose for default settings a joboption set which
contains for output
Settingsfile: None
Color Management: Leave Color Unchanged (!)
Results:
Source sRGB (color): PDF color 3x8 bits
OK
Source Grayscale: PDF gray 1x8 bits (Indexed)
OK
Source sRGB (gray) with R=G=B: PDF gray 1x8bits (Indexed)
Very wrong.
This is a well known bug in the Acrobat software:
http://www.adobeforums.com/webx/.59b641a5
Best regards --Gernot Hoffmann

How can I export the query result into access(*.mdb) file?

Dear all:
I want to export the query result displayed in jsp into excel file
and access file. And I have exported the result into excel format successfully, only one line should be added in the head of Jsp:
<%@ page contentType="application/vnd.ms-excel; charset=gb2312" %>
But how can I export it in access(*.mdb) file? I have replaced "excel"
with "access". But it can't achive my goal.
What should I do to achieve my goal?
Thanks!

The only reason your Excel export works is that Excel knows how to interpret comma separated values as an input file format. Access has no such beast.
If you absolutely must provide info in an mdb, one solution would be to create an ODBC datasource pointing to an empty mdb, then push data into it using the jdbc:odbc bridge, then make a copy of the file and stream it down to the browser. You may run into some ugly file locking items here - set the ODBC connection so it is not shared, and that might help.
This one is going to be ugly.
I suppose another approach would be to write a simple VB applicatin that uses automation to create an MDB, then stream that file down to the browser from your servlet. That would almost certainly be faster than the ODBC approach.
- K

[SOLVED] phpmyadmin white page

hello,
i have a big problem with the phpmyadmin from xampp and i cant solve it ...
i installed the xampp version: 1.8.3.4 on the manually way.
when i start lampp with: sudo /opt/lampp/lampp start i get this result:
Starting XAMPP for Linux 1.8.3-4...
XAMPP: Starting Apache...ok.
XAMPP: Starting MySQL...ok.
XAMPP: Starting ProFTPD...ok.
i can open http://localhost/xampp/ and i see the typical xampp website and the guestbook from xampp works fine so mysql should be right.
when i open http://localhost/phpmyadmin/ i get only a white page, no errors, nothing ...
i searched the web for that problem and i found that i have to edit /etc/hosts and commend out ::1 but this doesnt solved my problem.
has someone a idee to solve my problem?
thank for your help!
Last edited by Martago (2014-08-02 19:43:45)

SOLVED
sorry for posting this problem, the problem was, that no script blocked localhost, after i allowed localhost to use javascript then i get the normal phpmyadmin page.

Blank White pages will not delete

Help please if you can! I am making my first A3 photo book and love so many features that are offered. However I have a big problem that I cannot seem to fix. There are about 10 blank / white pages that I cannot delete - they are stuck! If I click the minus ( - ) button I get the message asking if I am sure I want to delete, I say yes, and then nothing happens. The pages all say "Insert Text" on them. If I try to turn them into a new page with pictures as layout then that adds a NEW page instead of replacing the white page. I have tried everything I can think of and cannot get rid of these.
Please help?!

Hi Caz - I had the same "can't delete or change" hyperlink problem. Fortunately for me is that I discovered the answer at the beginning of my project (I think you have some major complaining to do to Adobe about your situation).
Anyway, when first creating hyperlinks, you *MUST* be very very careful.
The "shared hyperline destination" checkbox MUST be checked. If it isn't, you are screwed.
To edit or delete those hyperlinks, you MUST have the Hyperlink dialog box open. If you can't find it, go to your main file menu, select WINDOW > Interactive > Hyperlinks.
That window will show hundreds of your listed hyperlinks.
In your text, click in the hyperlink you want to edit or delete. The resulting hyperlink "name" will be highlighted in the Hyperlink dialog box. From there, you can edit or delete.
Now, you might have to completely re-work your document (oy!), but at least, you will not make the same mistake again (oy! oy!).
InDesign has a bug that I just reported - although you can seemingly link to a file, it saves the information using escape characters in the filename path, which makes opening the file (at least on a PC) impossible. I have to edit every single pathname in Acrobat! Adobe better get back to me QUICK on this bug report because it is major, major, major!
We purchased InDesign to create beautiful linked PDF files - we could have just worked in Microsoft Word, but noooooo, we decided that InDesign offered so many wonderful features it was worth the investment. Who'd a thought they would have screwed up on the whole hyperlink thing. The programmers should have been shot for not making the "shared hyperlink destination" required and hidden from view.
Karen Little

F12 tools cause Internet Explorer 11 to not open any sites; blank white page only

On Windows 8.1 with Internet Explorer 11, if I open the F12 tools and close IE without closing the F12 tools, the next time I open IE (for any site) it opens to a blank white page and nothing loads. The workaround is to open IE using the "iexplore.exe
-extoff" command > turn on the F12 tools > and then close the F12 tools using the 'X' from the F12 tools pane > and then close IE. After this, IE opens all pages fine. Has anyone else seen this behavior with the F12 tools? Is there possibly a
hotfix for this?

Hi,
On my test machine, I cannot reproduce this issue, this would be related to IE settings.
I would like to suggest you try reset IE or test without addons to check result.
1. Run IE with no add-ons. Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
2. Try to reset IE to resolve the issue.
How to reset Internet Explorer settings
http://support.microsoft.com/kb/923737
Please understand that reset Internet Explorer to its default configuration. This step will also disable any add-ons, plug-ins, or toolbars that are installed.If this doesn't work, please provide us the error message in the Event Viewer for further research.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Export to FLA results in white page

Similar Messages

Maybe you are looking for