Export to html- what is the domain name?

When exporting as an html file what domain name is it asking for?

It's asking for the website address you'll eventually upload the site to.
If you're going to upload the site to www.calyn-is-awesome.com, enter that for the domain name.
Muse uses this information when it needs to refer to your site address while generating the HTML for your site.

Similar Messages

  • 6.1 What is the Domain Name when using LDAP

    Hi,
    We are currently installing Tidal 6.1, we are going to integrate Oracle Directory Server for LDAP (not AD).
    Qustion is, what is the domain name we have to provide when we install?
    Master and CM both on Linux.
    Thanks!

    Do you know any document which shows LDAP compatibility?
    I havent seen on Intsallation Guide.
    Problem is, when I install, linux servers are on different network (domain) but LDAP contains different domain details. Wondering how Tidal check the domain details when authenticating.
    When we give LDAP domain details, it gives following error.
    WARN:  javax.security.auth.login.LoginException: [LDAP: error code 49 - Invalid Credentials]
    Anyone know how to increase log level to debug?
    Thanks!

  • What is the domain name setting under internet tcp/ip?

    In the airport utility > Internet > TCP/IP panel, what is the 'Domain Name' field used for?

    The Domain Name setting would be that of your ISP. For example, I have Cox as my ISP. My Domain Name setting is: cox.net
    This field is not mandatory and is used to establish the appropriate domain that your Public IP address is located to assist DNS in directing requests.

  • What Is The Domain Name System for Active Directory on My Computer a Mac OS X

    When I try to bind my mac to an active directory domain I get the error message (“An invalid Domain and Forest combination was specified.  You should enter a fully qualified DNS name for the domain and forest”). I have tried so many things,nothing works
    Any suggestions?

    In general, the domain name you use must be correctly looked up (both backward AND forward) by the Domain Name Server you are using or using Active Directory or Open Directory will not work properly.
    In general, the first-listed DNS Address for each workstation must be one that contains the Active Directory or Open Directory names.
    You can use Network Utility "Lookup" function to test whether the names and the IP Addresses are looked up correctly. Both symbolic (e.g., mydomain.com) and numeric (e.g., 192.168.2.22) addresses of the Active directory server MUST lookup to the other.
    In MacOS X Server installations with private, non-Internet-visible Domain names, this problem can be solved by providing a local DNS Server, and populating the DNS Server with the Active Directory or Open Directory names and IP Addresses set for forward and reverse lookup.
    If the above is gibberish to you, you will need to contact your Active Directory Administrator for guidance.

  • The publishing settings page does not open when I click on the domain name and the iWeb application will not stay on the dock.

    Hello,
    I have been trying to help a friend who is having problems publishing her website. (She has done so previously using Mobile me)
    There seem to be a couple of things wrong with the application,
    1     if I drag the application icon onto the dock, it won't stay there
    2     I wanted to change where her site is published to (she has bought a domain name and has a hosting service now) but when I click on the domain name I do not get the "site publishing settings page" so we can't enter the new details.  All that comes up is the main page of her website.
    I would suggest uninstalling and re-installing Iweb, to see if that clears the problem, but as Iweb came pre-installed with her Imac, I am not sure that we can do this.
    Any ideas please?
    she's using and imac 24 in (approx 4 years old) and running osx 10.5.8

    NO - not correct.  Even if you are still using iWeb 08, you can still publish to another host and not MobileMe.  You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
    MobileMe will not be here after the end of June, so you will have to find alternative hosting.  They are not taking any new subscriptions.
    On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11.  Both contains iWeb 09, which is what you would want.

  • Nodemanager doesn't display the domain name

    Hi
    Iam new to wlst scripting and concepts of nodemanager. My aim is to start the server using nodemanager through wlst.
    First i invoked the wlst.sh shell script
    then i started the nodemanager by using startNodeManager command
    Then i tried to connect to nodemanager through nmconnect
    Now if i type the command nm() it displays the following
    Currently connected to Node Manager to monitor the domain {0}.
    It doesn't display my domain name , instead displays {0}. I guess because of the domain name not set properly , i am not able to view the status of the admin server. For this iam using the command nmserverstatus("AdminServer") , it displays the status as UNKNOWN.
    Can you please let me know what is that iam missing.

    To ask Apple to fix this, you need to repost it at
    http://www.apple.com/feedback
    If I remember right, display of such domains in the original script may depend on whether the domain officials have policies in place to safeguard against potential confusion between names that look the same in cyrillic and latin.  But it could also be a simple oversight.
    Each browser may be different:  Do Firefox and Chrome behave the same?

  • How can i edit the domain name ?

    Hello,
    I tried to register my first website through business catalyst.The domain name i took was www.wildixel.com . But, when i am trying to open the website it open other website with the same name. I guess it was already taken. Now i want to edit the domain name. Please let me know how can i.
    Thanks

    Hi there,
    Could you please explain more what you are trying to do and have done?
    You can not purchase a domain name through Business Catalyst so you would have not obtained a domain you listed there. You have to by it from a domain registra.
    If you have just entered a domain into the domain manager of your website but have not purchased the domain, this will not work. You have to obtain the domain first.
    If you have got your domain, have you gone into the domain settings of BC and added the domain in? Have you gone to the domain registra and changed either the A-record or the NS records to point to your BC site?

  • What should the global names be if I am cloning a server daily

    Hello Experts
    Currently I have two Oracle servers (on NT 4 , Oracle v 7.3.4.0). One is a Production server and second is a Stand by server. We have a NT scheduled batch job that shuts down both the servers once daily and copies over Data, log, clt etc. files over from Production to Standby. In case there is a failure, we simply switch our users from Production to Standby by asking them to connect using service name for the clone.
    Now, we need to test the same on Oracle 8.1.6. The confusion that I have is with the Domain Name. I guess I cannot supply the same domain names to both the servers. And if I do not give both the servers the same domain names, when I copy over all the files (after shutting down oracle on both machines) will the server come up???
    Please advise as to how can I accomplish the same task that I was doing earlier with 7.3.4.0
    Appreciate any inputs
    Arif

    This shows 2 databases, c6e and c6t. This came directly from exporting the KEY_OraHome10R2 from the registry.
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OraHome10R2]
    "ORACLE_HOME"="c:\\Oracle\\Oracle10R2"
    "ORACLE_HOME_NAME"="OraHome10R2"
    "ORACLE_GROUP_NAME"="Oracle - OraHome10R2"
    "NLS_LANG"="AMERICAN_AMERICA.WE8MSWIN1252"
    "ORACLE_BUNDLE_NAME"="Enterprise"
    "SQLPATH"="c:\\Oracle\\Oracle10R2\\dbs"
    "ORACLE_HOME_KEY"="SOFTWARE\\ORACLE\\KEY_OraHome10R2"
    "MSHELP_TOOLS"="c:\\Oracle\\Oracle10R2\\MSHELP"
    "ORACLE_BASE"="c:\\Oracle"
    "RDBMS_CONTROL"="c:\\Oracle\\Oracle10R2\\DATABASE"
    "RDBMS_ARCHIVE"="c:\\Oracle\\Oracle10R2\\DATABASE\\ARCHIVE"
    "ORA_CURATOR6_AUTOSTART"=hex(2):54,00,52,00,55,00,45,00,00,00
    "ORA_CURATOR6_SHUTDOWN"=hex(2):54,00,52,00,55,00,45,00,00,00
    "ORA_CURATOR6_SHUTDOWNTYPE"=hex(2):69,00,6d,00,6d,00,65,00,64,00,69,00,61,00,\
    74,00,65,00,00,00
    "ORA_CURATOR6_SHUTDOWN_TIMEOUT"=hex(2):39,00,30,00,00,00
    "ORA_c6e_AUTOSTART"=hex(2):54,00,52,00,55,00,45,00,00,00
    "ORA_c6e_SHUTDOWN"=hex(2):54,00,52,00,55,00,45,00,00,00
    "ORA_c6e_SHUTDOWNTYPE"=hex(2):69,00,6d,00,6d,00,65,00,64,00,69,00,61,00,74,00,\
    65,00,00,00
    "ORA_c6e_SHUTDOWN_TIMEOUT"=hex(2):39,00,30,00,00,00
    "ORA_c6t_AUTOSTART"=hex(2):54,00,52,00,55,00,45,00,00,00
    "ORA_c6t_SHUTDOWN"=hex(2):54,00,52,00,55,00,45,00,00,00
    "ORA_c6t_SHUTDOWNTYPE"=hex(2):69,00,6d,00,6d,00,65,00,64,00,69,00,61,00,74,00,\
    65,00,00,00
    "ORA_c6t_SHUTDOWN_TIMEOUT"=hex(2):39,00,30,00,00,00
    "ORACLE_SID"="C6E"

  • How to get the domain name from the System

    I need to get the domain name from the system in JDK 1.1.8
    Any Ideas?

    InetAddress.getLocalHost().getHostName() will get you the name of the computer the code is executed on. If that isn't the "domain name" then perhaps you could give more detail about what "domain" you are trying to find the name of.

  • How to enter the domain name in MS Exchange account

    When I want to connect my macbook with the companies e-mail what is on an MS Exchange Server I am missing the filed for entering the domain name. This is available in IOS 6 on ipad and iphone but where it is on the OS X?
    ..by the way: how do I enter an backslash?
    Thanks

    Hi,
    You should not need the domain if you use the recent Exchange server 2007 or 2010.
    However if those are not confugured properl and you do need to put it in you should try:
    domain\username
    ( \ is next -left- to the Enter key on your MBP :-)
    You may have to use [email protected]
    This all is not great though.
    Also worth mentioning that you will not be able to connect to Exchange 2003.
    Let m kenow if you have more questions.

  • Need to see the domain name displayed at the admin console login page

    I used to see the domain name at the console login page until I was running WLS 8.1 SP3.
    Now that I have SP5 I am not able to see it anymore, I am curious to know what has caused this error.
    If anyone has an answer , please reply .

    Hi,
    For accessing any application outside domain you need to have Public IP of the server where your you have put your application.
    Regards,
    Gulrez Alam

  • What are the field names for below mentioned

    Hello Friends
    What are the fields names for below tables
    in EKKO
    Purchase Document Date
    Net Value of the purchase document.
    In EKPO
    Item Description
    From which place We bought it. (It means in Sales Items there we can know from which plant we sold the goods, like in EKPO, there is any field like this)
    Please let we are defining the report to find out the stock availability for perticular storage location using select Options plant, company code, material no.
    How many tables involve her to build this report. and also field names, they come under which table.
    Please send me this information ASAP. PLz Plz Plz..........
    Regards
    Praveen

    You can check the fields of these tables via SE11
    Purchase Document Date  -  EKKO-BEDAT
    Item Description  -  EKPO-TXZ01
    Net price per item - EKPO-NETPR.
    Regards,
    Rich Heilman

  • What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro?  I need to transfer files from the old hard drive to the new computer.

    What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro?  I need to transfere files from the old hard drive to the new computer.

    No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
    I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
    I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
    synghem wrote:
    Thank you LowLuster,
    At the apple store they said I needed an esata to usb wire.  But looking at wires on line has been confusing.  Is sata the same as esata?  How do I know if I need a usb 3 or usb 2?

  • I started downloading my Upgrade to Photoshop Elements Version 13 and received my upgrade confirmation and cannot locate the download on my PC running Windows 7,what is the exact name of the download and where should I find it?

    I cannot locate the upgrade to Photoshop Elements 11 to Version 13, which I purchased today and started the download as per the Order Confirmation. My order No. is AD014117711. I am running Windows 7 on my PC and cannot locate the Download. How do I find it? What is the exact name of the Download?

    EdWeidman by default the download will be saved to your Download folder.  I do not know the exact name of the file which was provided to you.

  • What are the table names for CRM and APO?

    hi friends,
    what are the table names for CRM and APO?
    Regards
    suneel.

    hi Suneel,
    check in crm forum
    Re: SAP-CRM Tables
    BUT051 BP Relationship: Contact Person Relationship
    Similar to BUT050 , additionally contains Contact Person’s Address data
    BUT0BK Business Partner: Bank Data & Details
    BP Number, Bank Key, Bank Country Key, Bank Account Number
    BNKA Bank Master Data
    BUT100 BP: Roles
    ADR2 Telephone Numbers (Business Address Services)
    ADR6 SMTP Numbers (Business Address Services)
    Contains Email – Id of the BP.
    ADRC Addresses (Business Address Services)
    BP’s Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
    TSAD3T Table containing the Title text against a Title No.
    COMM_PRODUCT Master Table for Product
    CRMM_BUAG Master table for Business Agreement
    CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
    Note:
    1. It doesn’t store the Business Partner
    responsible for the transaction. To
    get the Partner No, link it with
    CRM_ORDER_INDEX.
    2. This table can be used for search
    based on the Object Id(Business
    Transaction No).
    CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
    CRMC_PROC_TYPE Master table Business Transaction Type
    CRMC_PARTNER_FCT Definition of Partner Functions
    SCPRIOT Priorities for Activities with priority text.
    CRMC_PROC_TYPE_T Text for a transaction type
    CRMC_ACT_OBJ_T Objective Number and Text for Activities
    TJ30T All the status code and text
    CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
    IBIB : Installed Base/Ibase
    IBIN : Installed Base Components
    COMM_PRODUCT : Products
    CRMC_T077D : customer account groups
    CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
    CRMD_ORDERADM_H Business Transactions CRM
    CRMD_ACTIVITY_H Activity
    CRMD_OPPORT_H Opportunity
    BUTOO : Customer details
    BUT001 BP: General data II
    BUT100 BP: Roles
    BUT150 BP relationship: Attribute table (test
    different
    BUT_HIER_TREE Business Partner Group Hierarchy
    CDBC_T_PRODUCTID Mapping: Product Id
    CDBD_ORGMAN Business transaction - organizational unit -
    set
    COMC_PRODUCT General Product Settings
    COMC_R3_FIELDS Assignment of R/3 material master fields to
    CFOP
    COMM_CATEGORY Category
    COMM_CFGMAT Basic Data for Materials
    COMM_HIERARCHY Category Hierarchy
    COMP_TYPES Hierarchy Tool: Comparison Type Check
    Table
    CRMC_CPRICPROC Customer Pricing Procedures
    SMOKVBEZ15 Assignment employees to positions
    CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
    CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
    SMOFSUBTAB : Mapping & Parameters
    SMOFDSTAT : Download Monitor (R4AM1)
    SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
    SMOFOBJECT Definition of Objects for Download
    SMOFOBJPAR Parent Objects of an Object in Table
    SMOFPARSFA Middleware Parameter
    SMOFQFIND Queue Finder Table for MW-Queue finder
    SMOFTABLES Definition of Tables for Download

Maybe you are looking for