Export to iTunes failing

When I export a song to iTunes it seems to work until I try to play the song in iTunes, at which point I see an error message saying the file can't be found. Any ideas? I'm using GarageBand 2.0.2 (50) with OS 10.5.8.
Thanks,
John Link

ok, no problems there... try the oddball problem fix:
first two things to try for “oddball” probs:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Export to iTunes fails

I have a single lecture recording, out of a series of six that were all recorded on the same equipment, which consists of one track of voice, and which when I export it to iTunes, creates a "mixdown" that progresses through the entire recording timeline, and then begins converting and immediately ends. The result is an empty file passed to iTunes. The other five recordings have all worked without a problem. One complication only, they were all recorded under the previous version of GarageBand and I am editing them on GarageBand '08. Has anyone seen anything like this?

how long are they?

Can't export to iTunes anymore

Been using GB for about six months. Yesterday after finishing a song in GB, I told it to export to iTunes, and it tried...it finished up until the part where iTunes automatically opens and the file appears in iTunes. Instead of that happening, iTunes opened, and I saw in the iTunes status window: "Copying 1 of 1: Bounced" then that failed, then the OSX message "Error: Cannot read or write to disk." I checked the permissions for the HD, and "Read and Write" is NOT highlighted as an option. However, I can save documents anywhere but GB. So I reinstalled all my OSX software, including iTunes. Now iTunes won't open at all--it tries, and then I get a message that it unexpectedly quit. I thought it might be a Library issue, so I tried dragging the library onto the desktop, even the old libraries. Nothing changed. I reinstalled iTunes, but still the same thing. I don't think it's a GB problem, but I really can't tell at this point. I posted a similar question in iTunes, so hopefully someone from one of the forums can help...Please?

Deauthorization:
If you have ever purchased songs from the iTunes Music Store, Apple has placed digital rights management copy protection software on your main hard drive (where Mac OS X lives) that identifies you as the legal purchaser of those recordings.
If you back up your whole hard drive, reformat it and re-install everything, or if you put in a new hard drive and set it up to be your Mac OS X main drive, you lose the right to access any of the iTunes Music Store songs that you have purchased, because you have inadvertently deleted Apple's digital rights management copy protection keys that authorize you as the owner of those recordings you purchased.
So if you need to do this to your main hard drive, first you must go into iTunes and do a de-authorization. When you set up your new hard drive, you have to re-authorize.
Apple sez:
[blockquote]To deauthorize a computer to play songs or spoken word content purchased from the iTunes Music Store, choose Advanced > Deauthorize Account. Then choose "Deauthorize Computer for Music Store Account" and enter your Apple or AOL ID and password.[/blockquote]
Similar steps have to be taken with many other music programs that utilize copy protection in software, such as Sibelius, SampleTank, Cubase, etc.
It's confusing because all that Apple and other companies tell you that you must de-authorize and then re-authorize if you move all your files to a new computer. While that's true, it's misleading, because the authorization issue also applies if you move to a new hard drive inside your existing computer.

I can't figure out how to make Garageband (v2.0.2 (50) export to iTunes

After recording the track, and selecting the region I want to export, I select the "export to iTunes" option on the pulldown menu, as per the instructions. A window then appears with a progress-meter, and I can see the locator moving along with it as it mixes down. However, the file is nowhere to be found on iTunes. What am I doing wrong? Thanks!

be sure you have a playlist already created in itunes and that the spelling matches it exactly on the export setup screen. GB is supposed to create a new playlist for you, however i've heard of this problem before. let me know if that fails.

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

HT1926 Routine update of iTunes failed. Eventually had to uninstall and reinstall iTunes x2. Installation failed with message 'Service Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services.

Hi,
When I tried to install iTunes update this failed, then tried to uninstall and reinstall itunes twice. Failed again. Could not open iTunes. I use an HP PC. Even tried to disable Macafee firewall, still itunes failed to install. Please help!!

Followed these instructions with a few changes. (Windows 7 x64)
Uninstalled programs in the following order:
- Itunes
- Apple Application Support
- Apple Software Update
- Bonjour
- Apple Mobile Device Support (uninstall failed due to Apple Mobile Device failure)***
- Restarted System
- Redownloaded Itunes from website.
- Run installer as Administratot
- Succefully installed
***To uninstall Apple Mobile Device Support
- Right clicked on Apple Mobile Device Support, Clicked Charge (second option), Repair, Next (failed to repari)
- Right clicked the Apple Mobile Device Support in the Programs and Features window and clicked Repair (third option in drop down list). (repaired successfully)
- Uninstall successful after the repair.
Below is a guess at a quicker solution:
Looking at the uninstalls, it may be worth trying to repair the Apple Mobile Device Support through the Program and Features window before trying to uninstall everything. It may be a faster fix for the freezing service. After the repair is successful the itunes update may work.
Hope this helps.

Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Please help! Itunes fails to open on my macbook pro. I have remove itunes and reinstalled it and it still will not work!, Please help! Itunes fails to open on my macbook pro. I have remove itunes and reinstalled it and it still will not work!

Please help! Itunes fails to open on my macbook pro. I have removed itunes and reinstalled it and it still will not work!

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

How can I export my iTunes Library to an external hard drive?

How can I export my iTunes Library to an external hard drive? and once i do that how can i play the library through the external drive? I basically want to be able to delete all my music on itunes once it is on my external hard drive so i can have more internal hard drive space.

Follow this guide very carefully: http://support.apple.com/kb/HT1364?viewlocale=en_US
It's very easy to do....

Creation of the export data source failed

trying to activate ods but getting this message that the creation of the export data source failed.
and it also gives message that RFC Connection to source system is damaged===> no metadata upload
Please can someone help me with this.
Thanks in advance.
Michelle

Hi,
Check ur source system connection. by going to RSA1-> Source System-> right click and then select check.
U will get the info about the source system Connection. IF RFC has failed then better be in touch with ur basis.
Or try restoring ur source system connection by
Source system-> Restore.
Its sets all the default conenctions b/n ur systems.
Once again check the connection now. if it says ok.. then try do the export data source and then assign the data source to info source and then maintain the Update rules..
Hope this helps-
Regards-
MM

HT1473 I have an EZ Vinyl/Tape Converter (MixMeister) to export vinyl records to iTunes. The computer downloads (records) the songs from the record, but when it is to be exported to iTunes, I get a window that says iTunes unable to export. (compatability?

I have an EZ Vinyl/Tape Converter (MixMeister) to record vinly records to my computer; which then is supposed to automatically download to my iTunes program. But it does not. It records and stores (somewhere) in the computer, but when it is supposed to be exported into iTones, I get a window that says something about incompatability and/or "close other windows in iTunes; but there are no open windows and iTunes is closed. I followed all instructions to EZ Vinyl to the T, but no export/import to iTunes. What am I doing wrong? What do I need to do? THX!

Tony, thanks so much. The message reads: "Unable to export to iTunes. Please make sure you close any active windows in iTunes. Would you like to try exporting again? [Yes] [No]"
And of course I click on Yesl, but I keep getting the same window message. I read somewhere, that MixMeister is not compatible with Apple iTunes 10 series versions. The advice said to go to control panel; Programs; click on iTunes; click on Change; click on Repair. I tried that, but I still get the same window message. Then I read that I should contact the mixmeister support website, which will be my next step. But if you can provide any direction, I would greatly appreciate it. Thanks again!
Dan

Export to PDF fails for some reports, but report viewer works

Hi all
Our application produces several different reports.
- Report A can successfully be viewed in the ASP.NET report viewer control and can be exported to PDF
- Reports B and C can successfully be viewed in the ASP.NET report viewer (all pages), but export to PDF fails with a very unclear error message. The stack trace is attached below.
Two days ago, reports B and C have fully worked, and I'm sure by 100% that the report templates haven't been modified since then.
Can anyone explain what is going wrong? Is there some internal logging inside Crystal Reports that can be investigated to find out about the reasons of the error?
Any help would be greatly appreciated!
Thanks
Kuno
PS.: The Crystal Libraries under investigation are quite old. In fact, it is a very old application that still runs under .NET 1.0.
CrystalDecisions.CrystalReports.Engine.ExportException: Fehler in Datei C:WINDOWSTEMP     emp_b9cf0dd0-8964-4ddf-ba09-0daaa4e1ef20.rpt:
Fehler von Export-DLL gefunden:
   at u263B.u263BJ(String u2660§, EngineExceptionErrorID u2660u25AC)
, Int32 u2660u266B)Int16 u2660
   at u263B.u263BD(Int16 u2660u2640)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
   at AdamsClient.Web.EngineerClient.TolerancesReportPage.btnSpecPDF_Click(Object sender, EventArgs e) in D:ProjektexxxxAdamsII SVNDevelopmentS
ourceAdamsAdamsClientWebEngineerClientTolerancesReportPage.aspx.cs:line 496
   at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
   at System.Web.UI.Page.ProcessRequestMain()

Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk

Itunes failed to download. Service apple mobile device failed to start. how do you verify you have sufficient privileges to start system services/

I was trying to upgrad my itunes and keep getting the message: itunes failed to download. Service apple mobile device failed to start. Verify that you have sufficient privileges to start system service. I uninstalled itunes, but keep getting this message. Any ideas how to fix this? thank you

How to restart the Apple Mobile Device Service (AMDS) on Windows
Solving MSVCR80 issue and Windows iTunes install issues.

ITunes fails to load. Message is Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services. Never had this problem before trying to install this upgrade

iTunes fails to load. Message is "Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services." Never had this problem before trying to install this upgrade. How do I fix this?

Dave, same problem here. And I did go in as admin to Administrative Tools, Services, Apple Mobile Devices and tried restarting the service. It seems there is a bug with the newest update, period. All of the normal "easy" steps don't work. Before I remove all of Apple's programs, including Bonjour....I'm running a full system scan.
But the answer will be to remove all of the Apple stuff, then reboot, then use whatever utility you have to remove all temp files...then go download and install it again. This has worked for several people (I read the thread before posting). Win 7 64bit. It just seems that Apple did not thoroughly test this new version. Period.
If Apple reads this...I have many computers...and whenever Apple wants to update something...it just about stops everything else that is going on. Total memory hog, even with 16G RAM and dual quad core processors. It has to learn to play nice with others.
After the scan and I'm sure an hour or two of work...I'll re-post.
Of course if you do image back-ups, as I do, you can simply restore your drive to its previous state and run the previous version of iTunes, declining the update, until Apple gets it right. Depending on the size of your drive, this could take hours. It is a matter of choice, of course.

ITunes failing to reconize existing MP3 files.

Ok this has happened to me more than once, but now it has gotten really sevre and to the point I'm just not willing to fix it the way I have in the past.
Before my iTunes library approx 1600songs; 128 albums, was working fine. Every single song, from every single album was in iTunes properly, and all the tags were correct as I've spent a while meticulously sorting them out. I take great pride in the cleanliness and organization of my library.
However now my iTunes wants to be a jerk to me and refuse to play certain albums, and sometimes 1 or 2 songs from an album while the rest will work. Where the album art used to be proudly displayed, there is now ugly text that just tells me "Album art unmodifiable" and will not play the song when double clicked, or the play button is pressed.
I figured it might just be some wierd problem, so I deleted the albums in question from the library and tried to re-add them by dragging and dropping them into the iTunes window; to no avail, as iTunes fails to reconize that I have added it at all.
I decided to re-install iTunes, and delete the iTunes library folder in My Music and try again. It still will not reconize these albums, and I have no idea why.
Before it's done this with maybe say one album at a time, which I can live with as I would just gain another copy of the album, either by downloading or ripping from CD to mp3. An answer telling me to rip directly to iTunes won't do, because some of the CD's I own are currently not in my posession, and exist solely on my harddrive at the moment. What I'm looking to do is re-add the existing files back into iTunes without re-ripping, or re-downloading, as the ones I have already on my computer have completely correct tags, aswell as album artwork.
So right now iTunes seems to hate me and it's decided to do this with upwards of 10 albums out of nowhere. All my songs have had thier ID3 tags updated to the newest version via iTunes so the artwork and tags edited in iTunes would be displayed on my player (archos, at the time I don't own an iPod but this may change as killed my archos during an "operation" to fix the battery)
So I've been reading stickies and other posts but none seem to directly provide an answer to my seemingly unique case of iTunes difficulty.
Any help at all would be greatly appreciated as this has happened many times: too many to be considered funny.
I've read on the forum that burning to an audio CD and the using that to import into iTunes may work, HOWEVER so many full albums are doing this that it is not practical to burn so many CD's just to put them back onto my PC.
Is that an alternate solution where one does not have to use about 10-20 CDs?

Yeah, what stubchain said. If they play in WMP, then you've run into the bug where iTUnes can't read the MP3 tags.
iTunes has problems with v2.4 ID3 tags.
http://www.id3.org/iTunes
iTunes also has a problem with v2.2 tags and artwork/beats per minutes tags on the same song.
Try setting them to v1 in another program and then see if iTunes can read them.
Then once iTnues can read tehm, I would convert them to v2.3 tags, which seem to be the most stable & have the best features.

Export to iTunes failing

Similar Messages

Maybe you are looking for