Export to iTunes, unable to find file

Gentlefolk;
Please forgive the very newbie question. I have the Checkbook app, which is great, but I want to have the app do some simple summing of monthly expenses. This is apparently does not do, but it does export out to CSV format. Given that, I can pop into Excel and go nuts.
After the export, the prompt says to recover the file in iTunes. But it doesn't say how. This apparently is so self-evident that no further direction is needed.
The support at iBear said with the iPad connected to the computer, go to the Apps tab and scroll to the Common files and get the export from there. But I have no "Common" files in the App store, nor does anything like that appear in the iPad that I can tell. I could grouse about lack of file access, but moving on....
So, I tried to export a Numbers app to iTunes thinking I could find THAT. But I cannot.
So, when something is exported to iTunes, just where the deuce is it to be found?
Many thanks.
Don

Try opening the stereo file in Quicktime Movieplayer and check the info:
1. Control click on the file.
2. From the contextual menu that pops up choose "open with" and select QuicktimePlayer.
3. When the file opens press ⌘ + i to get info on the file.
4. Is the original file 16 bit 44.1 khz? Or if it is an mp3, is it stereo, 44.1 khz?It needs to be for GB to read it correctly.
Kurt

Similar Messages

I get itunes can't find file when I tried to play a TV show I had purchased that was supposed to be in the cloud. There are several of these, including an entire season. In the store it shows that I purchased these shows when I checked them.

I get itunes can't find file when I tried to play a TV show I had purchased. I then checked and had this problem with an entire TV season I had purchesed. The shows were supposed to be in the cloud. I went to the itunes store, went to the tv shows and they showed that I had purchesed them. They do not show up when I click on purchesed in the store.

Try this...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Unable to find file "ConfigureClusterNode" error

Hi All
I am trying to install UCM Cluster. According to Universal Content Management Cluster Configuration Guide for UNIX 10g Release 3 (10.1.3.3.1)
I can do this running Installer with some parameters, but I have Unable to find file "ConfigureClusterNode" error.
(http://download-west.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/integrator/install_cserver_unix_10en.pdf)
[wc@hostname linux]$ ./Installer -set-ClusterNodeIntradocDir=/home/wc/cluster/node1 -set-ClusterNodeName=node1 -set-ClusterNodeAddress=10.33.33.33 -set-ClusterBinDirRule=local ConfigureClusterNode ConfigureAdminClusterNode
Unable to find file "ConfigureClusterNode".
The file wait.dat wasn't removed.
I need help to identify and solve the problem.

Hi, and a warm welcome to the forums!
Forgive me, I'm about to go for a psychic cure here and pull a rabbit out of the hat, or is it a needle from a haystack!?
I'm thinking that if this remote volume was like SMB/MS-DOS/Fat32, that the "caseness" may be the problem... here's why... Uppercase may translate to be shown either Capitalized or lowercase on the other end, and although Fat32 is supposed to be/ and in fact IS Case Sensitive, many things along the way may almost rightfully expect Uppercase 8/3 format, and "Testing.df1" may show as "Testing.df1", but also "TESTING.DF1", and "testing.df1" might show as "Testing.df1", but behind the scenes it's back to reality.
Might be the most nothingness I've ever pulled out of thin air!?

Backint failed "ERROR: unable to find file "

Hello
I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
I got errror:
BR0231E Backup utility call failed
ERROR: unable to find file /oracle/BWP/sapdata4
Can u help me
Regards
Fethi

This is the backup logfile:
BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
BR0101I Parameters
Name                           Value
oracle_sid                     BWP
oracle_home                    /oracle/BWP/102_64
oracle_profile                 /oracle/BWP/102_64/dbs/initBWP.ora
sapdata_home                   /oracle/BWP
sap_profile                    /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
backup_mode                    ALL
backup_type                    offline
backup_dev_type                util_file
util_par_file                  /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
system_info                    orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
oracle_info                    BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
sap_info                       700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
make_info                      linuxx86_64 OCI_102 Feb 8 2008
command_line                   brbackup -c force -p initBWP_sapdata_offline.sap
BR0116I ARCHIVE LOG LIST before backup for database instance BWP
Parameter                      Value
Database log mode              No Archive Mode
Automatic archival             Disabled
Archive destination            /oracle/BWP/oraarch/BWParch
Archive format                 %t_%s_%r.dbf
Oldest online log sequence     27
Next log sequence to archive   30
Current log sequence           30               SCN: 88160883
Database block size            8192             Thread: 1
Current system change number   88168768         ResetId: 655409152
BR0118I Tablespaces and data files
Tablespace     TS-Status F-Status File                                                       Size   Id.     Device Link    Type       MaxSize     IncrSize BlkSize
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data1                      17498636288    4       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data2                      16450060288    5       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data3                      15820914688    6       64785 NOLINK FILE   34359721984    104857600     8192
PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWM700.data1                   15128862720   11       64784 NOLINK FILE   34359721984    104857600     8192
PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM700.data2                    4132511744   12       64785 NOLINK FILE   34359721984         8192     8192
PSAPBWPDIM     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMdim.data1                    4202700800    7       64770 NOLINK FILE   10485760000     20971520     8192
PSAPBWPFACT    ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMfact.data1                   6719283200    8       64770 NOLINK FILE   34359721984     20971520     8192
PSAPBWPODS     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWMods.data1                   19868426240    9       64784 NOLINK FILE   34359721984     20971520     8192
PSAPBWPUSR     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMusr.data1                     239083520   10       64770 NOLINK FILE   10485760000     20971520     8192
PSAPSR3USR     ONLINE+    ONLINE+   /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1            134225920   20       64785 NOLINK FILE   10485760000     20971520     8192
PSAPTEMP       ONLINE#    ONLINE+   /oracle/BWP/sapdata1/temp_1/temp.data1              10485768192   -1       64770 NOLINK FILE   34358689792     20971520     8192
PSAPUNDO       ONLINE-    ONLINE+   /oracle/BWP/sapdata1/undo_1/undo.data1               1073750016    2       64770 NOLINK FILE   34359721984     20971520     8192
SYSAUX         ONLINE*    ONLINE+   /oracle/BWP/sapdata1/sysaux_1/sysaux.data1            671096832    3       64770 NOLINK FILE   10485760000     20971520     8192
SYSTEM         ONLINE*    SYSTEM+   /oracle/BWP/sapdata1/system_1/system.data1            838868992    1       64770 NOLINK FILE   10485760000     20971520     8192
BR0119I Redo log files
File                                                Size Group     Device Status    Link    Type
/oracle/BWP/origlogA/log_g11m1.dbf              52429312    1        64774 INUSE     NOLINK FILE
/oracle/BWP/mirrlogA/log_g11m2.dbf              52429312    1        64776 INUSE     NOLINK FILE
/oracle/BWP/origlogB/log_g12m1.dbf              52429312    2        64775 INUSE     NOLINK FILE
/oracle/BWP/mirrlogB/log_g12m2.dbf              52429312    2        64777 INUSE     NOLINK FILE
/oracle/BWP/origlogA/log_g13m1.dbf              52429312    3        64774 INUSE     NOLINK FILE
/oracle/BWP/mirrlogA/log_g13m2.dbf              52429312    3        64776 INUSE     NOLINK FILE
/oracle/BWP/origlogB/log_g14m1.dbf              52429312    4        64775 INUSE     NOLINK FILE
/oracle/BWP/mirrlogB/log_g14m2.dbf              52429312    4        64777 INUSE     NOLINK FILE
BR0120I Control files
File                                                Size   Id.      Device Link    Type
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf         34979840    0        64774 NOLINK FILE
/oracle/BWP/origlogB/cntrl/cntrlBWP.dbf         34979840    0        64775 NOLINK FILE
/oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf         34979840    0        64770 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
PSAPBWPUSR
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0057I Backup of database: BWP
BR0058I BRBACKUP action ID: bdxzgdlt
BR0059I BRBACKUP function ID: aff
BR0110I Backup mode: ALL
BR0077I Database files for backup:
/oracle/BWP/origlogA/log_g11m1.dbf
/oracle/BWP/origlogB/log_g12m1.dbf
/oracle/BWP/origlogA/log_g13m1.dbf
/oracle/BWP/origlogB/log_g14m1.dbf
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
BR0061I 19 files found for backup, total size 108250.510 MB
BR0143I Backup type: offline
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0307I Shutting down database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0308I Shutdown of database instance BWP successful
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
WARNING: unknown parameter: print_log_flag 1
WARNING: sort_backup_type not specified in .utl file
WARNING: default sort_backup_type to <size> for restore
Program:                /usr/sap/BWP/SYS/exe/run/backint 5.1
Input File:             /oracle/BWP/sapbackup/.bdxzgdlt.lst
Profile:                /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
Function:               BACKUP
Backup Type:            BACKUP_FILE
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
BR0232E 0 of 19 files saved by backup utility
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
BR0304I Starting and opening database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
BR0305I Start and open of database instance BWP successful
BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
Thank you
Regards

GRUB unable to find file, fails to install

(FTP install via floppies, GRUB 0.96-1, installation via arch/setup utility)
GRUB fails to install, giving the error message "Error: unable to find file" after checking for a file in /boot/grub (grub.menu IIRC), and quitting without further action. Menu.1st is there, but GRUB seems to want something else.

There might be an issue relative to the used fs. I allways had problems if I tried to install grub into xfs or jfs partitions, and had to install lilo first during installation procedure. After first boot, I usually removed lilo and installed grub without any problems.

CS2 Unable to find file errors

Hi
We are having trouble with photoshop cs2. We can not open most files. Tiff, PSD, some PDF files will give an "unable to find file error". Jpg files, and certain PDF files and TIFF files that use jpg compression work. I have tried resetting all the settings, changing scratch disks / memory usage, uninstalling all fonts, and reinstalling the application and the problem persists.
Also i do not know if this is related but the same time we started having errors in photoshop we also have problems in Microsoft Word. The font list shows a lot of fonts as just a white box. Other apps can use the fonts fine. Just not in word.
I have attatched a JPG file with screen caps of the errors.

I reset the options by doing the hold shift alt ctrl while starting up photoshop. Also i deleted all the preference files out of the application data\adobe\photoshop folder. Same problem persists.
Also another issue i have noticed. Say you perform an action like erasing somthing, or changing the brightness/contrast. You can not see the changes until you click on a different tool. Then it updates the display.
I will try and locate the faq and see what it says.

EP7.0 BI7 Report Export to excel - unable to read file

Hello
we have a EP7.0 portal that calls a BI7.0 BW report.
Once the report is displayed and we select "export to excel" a pop up comes up and if we select "open" it calls MS Excel but then a pop up shows inside excel - "unable to read file".
This also displays if we save the file locally then try and open it.
Our Excel 2003 application is running on a citrix desktop.
any help or ideas?
Simon.

Were you able to resolve this issue? We are incurring now.

Songs relocate, itunes unable to find

So basically I have many many albums stored on my computer which I have imported through vinyl lps. I recently relocated them all to a different folder in my documents and now whenever I try to play them on itunes the little exclamation point appears next to the song title and it says the original file can't be found. When I go and find it, the song plays just fine.
My issue is that I don't know how to fix this without having to go locate each and every song that itunes can't find. It would take a looooong time. Is there any way I can do it faster?

the only problem is that after deleting and re-adding albums I would have to retype all of the song info (save song title) for each song separately as I re-add them, which would take more time than just locating each song again.

Download Application - Itunes unable to find

Hi,
I have recently bought the Iphone 4. I have installed the itunes 10 in my PC (windows 7). I'm using it to synchronize the iphone with my PC.
I want to install some applications through internet sites (for e.g: appshouter.com) but whenever I try to download it, the following message appears: "We are unable to find iTunes on your computer. To download the free application, get iTunes now".
How can I solve this? Thanks!
cheers
How can I solv

Just found the solution in another discussion. Solution is not to use Google Chrome but Internet Explorer instead.

When exporting to Photoshop can not find files

I have a drive that when I export an image to Photoshop it can not find the files. Any suggestions on getting them to read?

I'm using MAC OS 10.49 the latest. I have 9 external hard drives. I can bring in all thumb nail images from all drives and as I update meta data it changes on all drives. But when I go to edit a specific image in Photoshop any image from this one drive and only this one drive I get error message "can not find file". If go out of Lightroom and into Bridge I can see the image and launch it in photoshop. It only happens so far with this one drive. I have several of the same manufacture drives. Does this help!

Missing links-Itunes unable to locate files after having ext HD unplugged

I have my music in different folders on my laptop, some on the internal hard drive, and most on my external hard drive (labeled drive F). I recently went out of town and didn't bring my external HD, and while I was gone I used my laptop to play songs and burn CDs from the folders I have on the internal hard drive (drive D). Now I got back home and plugged my external HD back in, and every time I try to play a song on that drive, I get the message "The song "_" could not be located because the original file could not be found. Would you like to locate it?" I can go and locate each song individually exactly where it was before, but I have way too many songs to do this. When I hit "Get Info" for one of these missing songs, at the bottom next to "Where," the filename starts with "file://localhost/G:/MP3 Library/etc." It should be "F://MP3 Library/etc." Is there a way for me to get Itunes to locate these files without going through them individually? I don't even have a drive G on my computer. If I changed my external HD's label from F to G, would that help? I have no idea what to do and I don't want to lose all of my playlists that I have made over the years. I also do not want to consolidate my music/folders into one Itunes library folder.

likely your ext hd used to be G and when you had it unplugged for a while your computer gave it the F drive when you plugged it back in. therefore the path was broken
So yes, changing it back to the G drive SHOULD fix it.
Message was edited by: Nudethecih

Itunes can't find files

ok - this has probably already been asked somewhere but i've been reading and reading and everyone else seems to have split their library or failed to copy their files properly when moving them to an external, etc, etc, and i don't thik i've made any errors here...
so here is my version of the age old thing.
i keep my entire itunes library on a portable external hard drive that i take everywhere i take my computer, and that i always attach when using itunes and my ipod. i have been doing this for a few months and have not had any trouble. the default folder in preferences>advanced>etc is set to the hard drive and all the files are there.
itunes has recently taken to not finding the files i want it to play, and thus not syncing properly to the ipod and all the rest of it. when i double click a track to play it, or try to get info on a track, it dispalys the dreaded ! symbol and tells me it can't locate the file. if i choose to manually locate them they are in the default itunes file and they play fine once i have told itunes where they are.
am i going to have to do this track by track for 30 gig of music, or is some wonderful person out there going to be able to tell me how to grab itunes by the back of the neck and march it down to my external hard drive, showing it all the files at once and shouting "there they are - right there!"...?
thanks in advance.
macbook Mac OS X (10.4.9)

nope - that's not it either! all my xml text things have identical paths to the real location of the files. nice idea, though!
i have fixed my problem, though. probably not permanently or in a very convenient way, but at present itunes is working for me again. here is how i did it...
all my files were also on my ipod, so i used a downloadble software package (music rescue, which is fantastic!) to copy all of the mp3 files from my ipod to my internal hard drive. i then dragged these and dropped them all into my itunes library. this meant that after a lot of copying i had all tracks twice, and every other track had the '!' symbol next to it.
i therefore had my library twice over, once working and once not working. i highlighted all the tracks with exclamation marks and deleted them, leaving the new version of my old library. i lost my playlists but i didn't really have any anyway, and no smart lists or anything like that. i probably also lost playcounts and the like but i don't really care about that either because i don't use itunes in that involved a way...
i am fully expecting itunes to work fine for a while, then do the same thing again, so i am leaving this as a unanswered question in the hope that someone has a suggestion that will offer a more permanent solution.
thanks to everyone for their help...
macbook Mac OS X (10.4.9)

HT4527 Itunes can't find files!

I transfrerred my entire Itunes folder from one external drive to another. I held option and selected the new folder as the library and it opened fine, showed files but when I tried to watch a TV show it said it couldn't locate the file.
I tried going throught the Itunes option after this of changing media folder location (http://support.apple.com/kb/ht1449) but this is even worse where the library data files and random folders are still on one drive and only media on the other (the point was to completely move from one d

Sounds like you may need to undo what you did and then try again. Normally moving the entire iTunes folder as a unit will work, provided everything is in the correct layout.
That said, it may be that there is another way to fix things. Select a broken track and press CMD+I to Get Info. Say no when prompted to look for the file, then look at the location given on the summary tab - it will begin file://localhost. Now find out where that same file really is. If you post back the two paths I may be able to suggest the easiest path to a resolution.
tt2

ITunes stalls when finding files-won't add to Library...

This started with trying to delete several duplicate files. The cure turned out to be far worse than the disease.
So tonight I moved all copies of all my music to another hard drive. Then I took a backup from a few weeks and (with Carbon Copy Cloner) ONLY backed up my iTunes music folders, hoping to start fresh.
When I open iTunes, I get that import, download or find music files screen. If I go to add to Library nothing happens. I select the link to search for files, and it works for anywhere from 3-20 minutes. It gets to a point where it says "processing download.m4v" and then it stalls. I waited over an hour once. All you can do is force quit at that point.
The weirder thing is I have even gone into terminal to display hidden files and there is no file with that name anywhere on my computer.
I do have what is on my iPhone and I have it set so it won't sync. My understanding is sync will replace my iphone with my iTunes library (which is nothing).
I thought there used to be a way to have the iPhone override the computer, or truly sync in that whatever is on one will be copied to the other. But this is how I lost everything yesterday.
Even if i were to throw money at this problem right now, I have no idea how to get iTunes to import anything at this point. I have gone in and deleted the preferences, and i have zapped the pRAM.
Any suggestions or reference much appreciated.
enzosf

I've been having the same problem on my wife's Windows XP machine and after some experimentation determined that iTunes does not like the fact that there is a space in name of the "TV Shows" folder. Since iTunes wants to put TV Shows in this folder you can't change the name but I did find a pretty simple work around. From Windows Explorer I mapped a network drive directly to the "TV Shows" folder, so instead of selecting "...\iTunes Music\TV Shows" (or some level above that) as the folder when doing a File, Add Folder to Library..., I selected n:\ (the network drive I mapped) and it worked great.
I don't understand what the issue is with the space, especially since music stored on a network drive does have this problem, but this did the trick.

ITunes can't find files in library

I moved my iTunes library to an external hard drive following the instructions but after I consolidated I saw that most of the files were not moved so I dragged and dropped the missing files into the library. The problem is that iTunes does not recognize the files that were dragged and dropped into the library and each time I try to open one from iTunes I have to manually direct it to the file. Since I have thousands of files I need to find a way to do this without going one by one. Can anyone help?

Can anyone help?

Export to iTunes, unable to find file

Similar Messages

Maybe you are looking for