Export to jpeg issue: ROES can't preview the files

We are using InDesign to create album layouts which we then order from our lab using their ROES software. Annoyingly, the jpegs created by InDesign cannot be previewed by the ROES software. I have to open them all in Photoshop and resave, which is very much not my intended workflow.
I have two questions.
1) What is different about the jpeg format that InDesign uses vs the one used by Photoshop?
2) Is there a setting in InDesign to make the jpegs compatible with the output from Photoshop?

http://www.myphotopipe.com/ROESFaqs.php
there is something - search for JPG and JPEG phrases
"How should I set up my files to send to you?
We prefer 8bit sRGB or Adobe98 color space. We prefer JPEG files (make sure that they are baseline-standard compression) but also support TIFF files (make sure that they are flattened and saved with no compression). JPG files will upload much faster for you."
or try to contact SoftWorks directly - if your Lab can't help you:
http://www.softworkssystems2.com/NewSite/index.php
robin
www.adobescripts.com

Similar Messages

How can we copy the file in to the importdp/exportdp location

How can we copy the file in to the importdp/exportdp location after doing the import and export activity.?

How can we copy the file in to the importdp/exportdp location after doing the import and export activity.?use Operating System command; like COPY or cp.

Can't create the file "mwmac_white.png." The disk may be damaged or full, o

I keep trying to upload my web page and keep getting this error message?
Does anyone have a clue what could be the issue?
Can’t create the file “mwmac_white.png.” The disk may be damaged or full, or you may not have sufficient access privileges.

You disk is not damaged or full. iWeb just can't find that file. I had the same problem. I found what the file was, deleted it from the site in iWeb and added it anew and published. That solved the problem.
Go to your site online, in the Window menu select "Activity" window. When it comes up locate in the list of files that are in the site the mwmac_white.png file. Click on its url to see bring up a new window with it so see what it is. If it's one that you can find in iWeb and delete you can add it again.
I'm not sure how you would go about it if that file is one that iWeb creates on the fly when publishing the site.
OT

Can't preview RAW files in Bridge CC, administrator issue?

Can't preview RAW files in Bridge CC.
When i try to upate Bridge, it says:
Bridge is unable to check for updates, cause it can't connect to the internet or user is logged in as a non-administrative user.
So then i have to log in as a administrative user to the Bridge...and update..
Can't it be done easier???
I must also say i have also Bridge CS6 installed on pc and there everything is working fine.
Thx.

1/ Adobe Bridge should be possible to open without administrator issue.
By default it does, something seems wrong with your install
2/the images DO appear first for 2 or 3 seconds , then it turns to a RAW file icon.
Again indicating a wrong install, you see the embedded jpeg previews briefly but then the Raw thumbs should be build. When you see the generic Raw icon this means you don't have the correct version of the ACR plug in installed to match your camera or no converter at all.
Try this page:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
3/i only succeed in openening Bridge descently , so with ableing to see RAW files , WHEN i go to c:/progamfiles/Adobe/AdobeBridhecc/Bridge.exe
When, If i copy the exe file for opening Bridge CC and i put it on the Desktop, it DOES NOT Preview the RAW files.
Here you have lost me. As a Mac user I'm afraid I don't know nor understand anything about .exe, I download the .dmg file for an application which then automatically opens and I just click on the install icon, provide admin password and serial number once and then start using it without bothering about install ever again

HT4075 I don't have any problems merging the documents by dragging, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I tried save and export, how can I create the file after merging?

Hi, I'm having trouble saving the documents when merging in Preview. I don't have any problems merging the pdf documents by dragging them in preview, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I've tried save and export, but none merge the documents after saving... how can I create the file (with all the pdf files) after merging?

That's a comment in the file. It has no effect at all.

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles pannel because it's locked. I would also like to know how I shold tag my cove content. I dont' want rea

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles panel because it's locked. I would also like to know how I should tag my cove content. I don't want the reader to get lost in content other than the body of the report, but I also don't want to ignore some content completely by tagging it as artifacts. What should I do y'all?
Thanks,
Josh

Hi Rob,
From the screen shots it looks like your script is not formatted properly (you may refer to 'Paladin Script' in 'Sample Project' to get an idea of how the script should be formatted.).
Further please follow the steps mentioned below to use Story to PP workflow.
Create a new Film script in Adobe Story
Create scene heading – INT. LOCATION – Day (these will show up in the outline view panel on left hand side)
Hit enter, hit TAB
Enter the name of the speaker, hit TAB or ENTER
Copy over the transcribed text
Build your script this way
Number scenes from the production menu
Export ASTX file for your script : File->Export->.astx
Open Premiere Pro
Create a new project, bring in media
In the project pane, find the "Scene" column
For the clip that contains the spoken text, assign the same scene number to the clip as you have in the story script (lets say both are scene 1)
Click out of the scene box in the project panel in Ppro
Right click on the scene that you just assigned a scene number to and select – attach Story script
Select the .astx fle you exported in step 8
Click ok
You should now see the script data in the metadata panel for the clip in the metadata panel.
You can now run speech to text based on "Embedded Script metadata" to time align spoken word to the script.
Let us know if this is helpful.
Thanks
Rashi - Story Team

My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

The dark bar is caused by the option "Show metadata below image".
Check the settings for the metadata overlays in Grid view (basic and expanded) by clicking the little "badge" icon below the Browser and selecting "Edit". Is the filename still enabled in the list? And in a high enough position to have precedence for other metadata tags, if the space does not suffice to show all selected tags?
Regards
Léonie

HT3775 I just made a movie in iMovie and exported in MP4 format, now it won't open, error message says quicktime can't open the file ***? Anyone?

i just made a movie in iMovie and exported in MP4 format, now it won't open, error message says quicktime can't open the file ***? Anyone?

I have the same problem. I'm using Mavericks OS and latest iMovie. Both downloaded last week. I save the movie into File (as directed) and QuickTime
will not open. I'm then directed to a page of formats which are supposed to be supported on which is .mp4. Any tips?

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

CS5 can't preview the fonts image after upgrade the OS X 10.10.1

My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!

Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...

Within itunes, can I use the file/library/export library option to transfer itunes to a new pc

Within itunes, can I use the file/library/export library option to transfer itunes to a new pc? I have read the other options but they will be difficult for me to action. Can this be used as an easier route?

No. See this migrate iTunes library post.
tt2

Renamed Macintosh HD now Dreamweaver can't preview local files in Web Browser even though I have redefined local sites

I've renamed my Macintosh HD on my Macbook something else-and
then went in and redefined all the local sites in Dreamweaver CS3
with the new name. Dreamweaver locates all the local files and
allows me to edit and work on them-but then when I save and preview
it can't locate the files. I've changed the name of my hard drive
back to Macintosh HD and still the same problem. I'm completely
stuck and this is frustrating the hell out of me-what do I
do?

If it is during the preview, check the test server
information in the site settings.

I am having issues with trying to update safari. It keeps saying, "Safari can't open the file "Safari_Updater-2.exe" because no available application can open it.

I am having problems with trying to update safari and this keeps popping up, Safari can’t open the file “Safari_Updater-2.exe” because no available application can open it. Also, I have a bunch of pops and I have my pop up blocker on but I keep having pop ups.

The info below should help with your pop-up issue.
Check the links below for options to remove the Adware
Easy method: http://www.adwaremedic.com/index.php
Somewhat more difficult method: Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
And, read this article below to see how the Adware arrived on your computer.
How to install adware
The Safari update can be found at The App Store updates section. Where are you obtaining the file?

I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

So it sounds like you are trying to burn a DVD with photos on it so the photos can be either transferred to or displayed on a Windows PC, is that correct?
For the purposes of this I am going to assume you are using iPhoto '11.
Gather the photos you want to burn to DVD in one album in iPhoto. This is not absolutely necessary but it sure makes things easier for me.
Select that album, then go to the File menu and select Export...
In the dialog that shows up, select the File Export tab. Select the setting you want to use for export. Click the Export button.
Another dialog will show up. Set the location to Desktop and click the New Folder button. Name the folder something nice and descriptive and click the Create button.
Click the OK button. Quit iPhoto as the rest of this work will be done in the Finder.
You will now have a folder on your desktop with that nice descriptive name. Find it and select it. Go to the File menu and from it select Burn "Descriptive folder name" to Disc...
Insert a blank DVD when prompted.
Let the finder complete the work and eject the disc afterwards.
That's it. Best of luck.

Export to jpeg issue: ROES can't preview the files

Similar Messages

Maybe you are looking for