Export to Livetype - resolution doesn't match

I've got a 720p project in FCE, when I say export to Livetype so i can set up the titles in the right places, two things I want don't happen...
(1) It exports it as 4:3 even though I'm importing to a 720p matching project in LT
(2) I want to be able to just grab a selection of the movie, not the whole lot so i can match up just a bit of it.

1. Check item properties for the sequence you're working in and confirm it's format.
2. Mark In and Out in the timeline for the section you want to export and export for LiveType.

Similar Messages

Image in Lightroom doesn't match exported image viewed in Photoshop

After all my hard work in Lightroom, I export the image to a folder on my hard drive. When I open this exported image in Photoshop and view it alongside the Lightroom version of its "twin" in Lightroom, there is a significant difference. Why is this? I want to use these images in my books, but my time is wasted if I end up with anything other than what I created in Lightroom. Shouldn't these images match exactly?

Thanks Jao and Michael...the color management idea makes a lot of sense.
Adding to this idea, when I open the Pshop file I get a message about the doc having an embedded profile that doesn't match current RGB working space, and the usual 3 options: Use the embedded profile, Convert color to the working space, or discard embedded profile. No matter which option I choose, none of the opened docs match the Lightroom version.
The color balance is fine, but the colors aren't as vibrant. The Pshop photo is dull and lifeless compared to the Lightroom version. I used Clarity which added subtle brightness, and Vibrance to crank up the color in LR which added wonderful dimensionality and punch to the landscape scene, but the Pshop version has dulled these back down.

After effects CC export to premiere pro CC: audio doesn't match

Hello!
I am making an animation serie for Belgian TV. They need me to export only my audio from premiere (I make the animations in after effects).
They need OMF format.
When I export from after effects CC > Premiere pro project (only to export my audio to OMF from here) the audio doesn't match.
Adobe media encoder doesn' support OMF unfortunately.
Example; if I stretch the audio time in after effects, premiere doesn't.
I am really stressing out and any help would be very welcome
Thank you!
Ellen

Hello Jim
Thanks for the reply!
When I import my after effects composition into premiere, it is perfectly visible and the audio is correct.
But now it is suddenly impossible to select > export > OMF
Do you know why this is?
Thanks!

Why does my media want to export as a MXF when I match the sequence settings?

I've made films with Premiere CC before and have never had this problem, I go to export I click the box to match my sequence settings and it will export as a MPEG, and now, it wants to export as a MXF. My computer doesn't recognize MXF files. Is there any reason why this may be happening?

Thanks so much you guys. So I don't know what was up with my computer or my software, but, it used to be that I had to check the match sequence settings to get my project to export with the same video dimensions. But, I have now fixed it! Thanks so much! Now I have better quality and I'm doing it right

Closing Stock Valuation doesn't matched physicallly

Hi SAP Gurus.,
Can you please assist me reg this issue"Closing Stock Valuation doesn't matched physicallly".
May I know the possible rectification ways to solve this problem.
Thanks in Advance,
Regards,
Balaji Bhonsle

Physical Inventory...
http://www.sap-img.com/materials/physical-inventory-process.htm

How do i export multiple full resolution movie files at the same time in final cut pro 6?

I've been using Final Cut Pro since version 3 came out, know the program well, have even had jobs consisting of just operating the program. I'm currently running version 6 because that's the latest one that works on my computer. Back in verison 3, there used to be an option under Export to export a "Final Cut Pro" movie, which was really a Quicktime movie but appeared with a FCP icon and defaulted to opening in FCP, but the important thing about it is that it was a full resolution copy of the movie with no compression. Now, that option seems to have been changed to "export Quicktime movie." In my opinion that change is kind of stupid since it is so much less specific and is even less of an implication that one is exporting a full resolution file. But in fact you are.
One also has the option of using Compressor to export a version of a movie, and therein there are so many different options that if you are not confused by it I think there's something wrong with you. Moreover, it would appear that there is no equivalent of exporting a full resolution version of a file in Compressor. Fair enough: a full-resolution file involves no compression so is not appropriate for "Compressor." BUT, suppose you want to export multiple uncompressed, full-resolution movies at once. When you use Compressor, you are able to create batch lists and export many things at the same time, for instance, lists that will take many hours to complete so you can go to bed and get the results the next day. But as far as I can tell there is no way to do this at full resolution without compression. Instead you have to sit at the computer waiting for each one to finish and after each one, manually go to the next and select "export Quicktime movie." Even if there is a way to do this I would complain that such an obviously desireable thing is so unaccessable. In fact, the only reason I've typed out my question at such length is because I'm stuck here waiting for each one of my movies to export.
Anyway, all my complaints aside, anyone know how to do this?

what you're missing to export multiple files is the batch export command available in the file menu or by control clicking on the items in the browser. You can export multiple sequences/clips at full resolution with this.
This has been available in fcp for a long long time.
Wow, you are right. Now that you mention it, I can't believe I never noticed that. Thanks.
Only if you have the 'Self-Contained' box checked. Otherwise you'll end up with a reference movie.
Correct. That box is typically checked by default. There are other default settings you could change that would not result in a full-quality version, but what I meant was hitting that option from the pull-down menu, then changing nothing and hitting ok.

Iphone 5 system serial no doesn't match with outer box? Case of misprint? i see only one latter is serial no doesn't match

I recently bought iphone 5 32gb white. Was surprise to see the outer box serial no doesn't match with iphone 5 system.
They have print XXXXXXTXXXX on box and on phone its XXXXXX7XXXXXX. Only one latter is mixprint though.
I check coverage status at apple site. The box serieal no is not found in apple system while the iphone 5 inside serial no i can see warrenty.
plz help is it normal to have serial no unmatched on phone and box or the phone is not genuine

You are correct. The SIM Tray of iPhone 5 does not have the Serial # printed on it. So your Serial # is the one in the Settings app About. This is your true Serial #. A 7 and a T from a box label are not distinct enough to matter. Apple will only honor the Settings About Serial # and the ones located inside the iPhone 5, which will be the same as the About Serial #.

Itunes will no longer accept any of my credit cards. Says security code doesn't match with any card I use. I have inputted new card info in the apple store area and it still says the same thing in itunes. Customer service is no help at all.

Itunes will no longer accept any of my credit cards. It says vcode doesn't match when it does. Customer service is no help. I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.

Itunes will no longer accept any of my credit cards. It says vcode doesn't match when it does. Customer service is no help. I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.

Error: The decapsulated inner packet doesn't match the negotiated policy in the SA

I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
After some effort, I was able to get the Android devices to connect via VPN. However, my syslog server has a number of errors recorded that look this this:
%ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y. The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp. The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
Digging further, it seems this error might be due to a NAT issues with the VPN connections. VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working. However, I made no changes in the config, except for those related to additions needed to support L2TP. With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses. I'm at a loss.
The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
I noted in the config this line:
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
nat (inside) 0 access-list inside_nat0_outbound
I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be. I'm hoping somebody might be able to point out my error.
Here's the config file (at least the parts that might be of interest):
: Saved
ASA Version 8.4(3)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa843-k8.bin
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit icmp any interface outside time-exceeded
access-list outside_access_in extended permit icmp any interface outside echo-reply
access-list outside_access_in extended permit icmp any interface outside unreachable
access-list outside_mpc extended permit ip any interface outside
access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
ip verify reverse-path interface outside
nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
object network obj-192.168.3.0
nat (outside,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy testVPN internal
group-policy testVPN attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value testVPN_splitTunnelAcl
default-domain value test.us
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
group-policy testVPNns internal
group-policy testVPNns attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
username testuser password PASSWORD encrypted privilege 15
username testuser2 password PASSWORD nt-encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group testVPN type remote-access
tunnel-group testVPN general-attributes
address-pool VPN-Pool-1
default-group-policy testVPN
tunnel-group testVPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNns type remote-access
tunnel-group testVPNns general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNns
tunnel-group testVPNns ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp type remote-access
tunnel-group testVPNnsl2tp general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group testVPNnsl2tp ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp ppp-attributes
authentication ms-chap-v2
One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup". Is that actually a limitation, or did I make an error that forced that requirement? I wanted to use "tunnel-group testVPNnsl2tp".
Thanks!

Chris,
This is still a bit off the mark. I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them). Let's just remove that stuff from consideration. I actually tested the current configs just to see if they are working since the upgrade. testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access. I guess there is a NAT config issue there, too, but not sure what it is, yet. I've not investigated that closely.
I want to solve one problem at a time, though I understand there are some interdependencies.
What I'd like to focus on right now is just the L2TP VPN connection.
From what I've been able to understand from the documentation, what I need are these lines:
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key P74bmqL6rT40bl5
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets. I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport"). I also don't think I want "pfs group5". The above config "works" in that I get connected -- all negotiation is done. It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
Paul

HT1758 Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion? My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB", mine starts with a "W." Purchased direct from Apple August 2007.

Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion? My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB" and mine starts with a "W." Purchased direct from Apple August 2007.

Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Open System Profiler and report what you find displayed for the Model Identifier.

I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for pass)

I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for password)

Your email password.
iPhoto '11: Email your photos
Open Mac Mail. From the Mac Mail menu bar click Mail > Preferences then select the General tab.
Make a selection from the: Default email reader pop up menu.

Video copied to DVD doesn't match project I can see

Okay,
Probably another basic question but I can't find an answer in the Adobe manual. I just discovered (after burning 8 copies of the same file) that the movie on the DVD doesn't match what I see in the Project screen. The dropdown of the Organize>Project looks like what I want to see except that it seems to have the original avi file that I subsequently edited as well as the edited file. The sceneline looks correct. The timeline looks correct. I have tried eliminating the "markers" but there weren't any to eliminate - the menu drop down only gave me the option to add markers. One hint is that the DVD is picking up a menu template that I was playing with but couldn't get to work and then deleted. I ended up using the very basic title screen with black video from the top line Title dropdown menu instead of the Template option in Edit. I can see the new title in scene and timelines. Again, per previous question just posted, I see nothing in the clip screen
(i.e. th boxes) under "organize". Also, the video clip on the DVD appears truncated by approx. half the play time.
At one point I could get only the old menu template clip to show up just below the montor screen but couldn't figure out how to delete.
thx

Camcorder is a Sony Handcam D8 Digital Video, not minidvd. Tape was transferred using Adobe Premiere elements 9 with brand new firewire.
First screen capture below shows only one of two black screen titles upon opening program. Nothing in media boxes. Second Capture shows frame of video clip as a result of double clicking on the third sceneline box. Third screen capture shows what the DVD opens with when played after burning. I have tried to create this from scratch but can't get rid of the fancy menu screen in the third screen capture below. Replaying the movie using the sceneline or timeline prior to burning the DVD doesn't show the "fancy picture frame" with the "play movie" option shown in the dvd playing in the third capture below. Does this help? It seems to be something like an invisible preset that I can't get rid of.
C

I have been buying apps for a long time without a problem using my credit card on file. All of a sudden itunes is not recognizing my card which is in good standing. All the info is correct but itunes/apple says it doesn't match the bank info. Any ideas

I have been buying apps for a long time without a problem using my credit card on file. All of a sudden itunes is not recognizing my card which is in good standing. All the info is correct but itunes/apple says it doesn't match the bank info. Any ideas?

Answered in your Other post on this Topic...
https://discussions.apple.com/message/24053626#24053626

I am trying to update my bank information in iTunes and I keep getting an error message stating it doesn't match my bank information. I also have 9 pending charges from iTunes. Please help

I am trying to update my bank information in iTunes and I keep getting an error message stating it doesn't match my bank information. I also have 9 pending charges from iTunes. Please help

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Error with calendar database: Program version 4.2 doesn't match enviroment

hi!
im instaling jes in a windows 2000 machine and i get this error when trying to start calendar:
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Information: Log created (1156170958)
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: Sun Java System Calendar Server 6 2005Q4 (built Dec 27 2005) csadmind starting up
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Counters Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind successfully opened the Counters Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module is refreshing
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshing
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshed
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module has refreshed
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind argc=1 argv[0]=C:\Sun\CalendarServer\bin\csadmind.exe
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Calendar Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: Error with calendar database: Program version 4.2 doesn't match environment version
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: caldb_InitializeEnvironment: dbenv->open returned 22
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Critical: Fatal error 70: Cannot open calendar database
anyone have faced same problem?
thanks in advance

Hi Vyacheslav,
its wierd that when I run db_stat on windows, for my environment, it works.... I installed Berkeley DB XML 2.4.16 from a self extracting package.
When I tried running from my Linux box, the error message appear... The native library on my Linux box was built from the zip package dbxml-2.4.16.zip
Arent they the same?
Thanks!

Export to Livetype - resolution doesn't match

Similar Messages

Maybe you are looking for