Export to pdf failed while using Barcode 128 with CR Basic 2008
Hello,
I get the following error message when I try to export a Crystal Report Document to pdf: Error in File
"C:\DOKUME1\URSULA1.HAR\LOKALE~1\Temp\temp_57163b88-26f9-43c1-8043-d3938772b762 {F54D4509-BFEF-444C-B672-DF893EEBD942}.rpt": Operation not yet implemented.
This error only apears when the report contains a barcode with the font Code-128 (print in Barcodetype 128). Is this function not possible with Crystal Reports Basic for Visual Studio 2008? Must I install an additional tool?
Waiting for your answer and kind regards
Ursula
Hi Ursula,
Please provide following:
1) Service Pack you are on (CR)?
2) Visual Studio version
3) Windows or Web Application?
Thanks
Saurabh
Similar Messages
-
Export to PDF fails for some reports, but report viewer works
Hi all
Our application produces several different reports.
- Report A can successfully be viewed in the ASP.NET report viewer control and can be exported to PDF
- Reports B and C can successfully be viewed in the ASP.NET report viewer (all pages), but export to PDF fails with a very unclear error message. The stack trace is attached below.
Two days ago, reports B and C have fully worked, and I'm sure by 100% that the report templates haven't been modified since then.
Can anyone explain what is going wrong? Is there some internal logging inside Crystal Reports that can be investigated to find out about the reasons of the error?
Any help would be greatly appreciated!
Thanks
Kuno
PS.: The Crystal Libraries under investigation are quite old. In fact, it is a very old application that still runs under .NET 1.0.
CrystalDecisions.CrystalReports.Engine.ExportException: Fehler in Datei C:WINDOWSTEMP emp_b9cf0dd0-8964-4ddf-ba09-0daaa4e1ef20.rpt:
Fehler von Export-DLL gefunden:
at u263B.u263BJ(String u2660§, EngineExceptionErrorID u2660u25AC)
, Int32 u2660u266B)Int16 u2660
at u263B.u263BD(Int16 u2660u2640)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
at AdamsClient.Web.EngineerClient.TolerancesReportPage.btnSpecPDF_Click(Object sender, EventArgs e) in D:ProjektexxxxAdamsII SVNDevelopmentS
ourceAdamsAdamsClientWebEngineerClientTolerancesReportPage.aspx.cs:line 496
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain()Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk -
How to export low quality png while using exportToPNGSequence jsfl command ?
how export low quality png while using exportToPNGSequence jsfl command ?
var mat=fl.getDocumentDOM().library[0].matrix;
mat.a=.5;
mat.d=.5;
fl.getDocumentDOM().library[0].exportToPNGSequence(file:///yourfile.png,startframe,endfram e,mat); -
i am having problem while using ms word with anjal is not working properly but its working in facebook and other areas.i need and its very important to using tamil fonts for my job.can anyone help me out from this problem.
thanking you
by
mosesThose who are knowledgable in this area (myself not among them) say that Word's support for Asian languages is faulty. The best word processor for that use is "Mellel."
-
my Ipad 3 will not turn-on after it went off while using it, anyone with the same experience and have it resolve?
Is the battery charged?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM
Hi friends,
SUBJECT : AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM
I'm not getting any sound while using web-cam.
I tried recording my voice , and played.. i can see my video but audio
Do we have any settings where i need to cross-check to make sure that everything being turned-on ?
My laptop details:-
HP Pavilion dv6 laptop
Operating system Installed - Windows 7
Can someone help me with this?
Thanks
kiranHi,
not sure if coincidence or the same question, but the same question got asked internally. The seeded option is required to get the OJSP filter installed. Here's the internal response
ADF View integration with MDS not configured
In web.xml, you need to have mds-ojsp intg enabled to load jspx base + customizations from MDS. In your web project in Jdev, go to ADFv project properties and select “Seeded customization” property. It would enable mds-jsp engine configuration in web.xml. If you want to use user personalization feature at runtime, you would need to select “User customization” property as well which would enable ADFv change persistence config in web.xml.
Warning: Some of the metadata under ... is packaged as part of both WAR and MAR. This metadata cannot be accessed from WAR using MDS.
For these two packages, you are including the files in both WAR & MAR. This warning conveys that since these base files are being put in MAR, at runtime they would be read from mds repository & not from WAR.
Frank -
Exporting to PDF fails for a report
Hi,
One of my reports no longer exports to PDF. When run through our ERP system it looks as if it's exporting but the progress popup window quickly dissappears. When we go to the location where the exported file should be nothing is there.
I tried opening up the report in the Crystal 11 and exporting from there. I get the following two error messages:
Failed to export the report.
Not supported
This was working yesterday. The only thing I did was to add the u2lbar.dll to the bin folder and copy over the barcode font so that we could display barcodes on this report. However, even if I comment the line to do the barcode I still get the same problem.
Thanks,
JonThe font you are using probably doesn't have embedding permissions.
hth,
- Ido -
Export to .pdf fails.
Tar 6388351.992
Customer is on DBI 7.0.1 and XML Publisher 5.0.0
DBI uses XML publisher to export to .pdf.
When trying to export reports to PDF, the customer gets an
"Exception in Process Method Of FOProcessor "error message.
This does not occur when exporting to Excel.
After setting up a trace we got the error message:
[070507_112246550][][ERROR] Failed to load the image:
http://nadine1.orange.cm:8000/237/OA_MEDIA/bisorcls.gif
The problem is this URL
http://nadine1.orange.cm:8000/237/OA_MEDIA/bisorcls.gif
It should be
http://nadine1.orange.cm:8000/OA_MEDIA/bisorcls.gif
The customer has checked and this one without /237 in it works.
The customer's <db_servername> .XML file and <appl_top>/admin/adovars.env
both show the correct setting for OA_MEDIA and he has run autoconfig again.
Does anyone know where this misconfiguration could be
coming from.Hi
Please use the internal mailing list for XMLP questions the forums are meant for customers not support or development.
That said, as I remember the integration, XMLP just generates the ouput. the DBI module is in charge of where its put and how its accessed. Id suggest asking the DBI dev team for some help.
Regards, Tim -
InDesign CS5.5 Export to PDF fails how to fix?
Using InDesign CS5 to creat a portfolio, all layed out and ready to print but when I export to PDF it takes a long time and then fails.
What am I doing wrong?Is the issue with the one file only or with multiple file, if it is with the one file only then there could be some component like Image , font that could be causing the issue,
And if it with the multiple file then you can try this article:- kb2.adobe.com/cps/878/cpsid_87876.html -
Errors in Export to PDF for web use - some images are lost when PDF is enlarged & in browser
I have a multi-page PDF in InDesign CS6 that I want to export to view on the web. I need the file to stay under 2MB, and I need it to be crisp and nice enough to read the type on the page (as small as 9pt type).
The errors that are occurring are the following:
On some browsers, some images will entirely not show up. Some of the missing images have been pasted into the document, some placed. I cannot think of a correlation.
When the PDF is enlarged (Adobe Acrobat X 10.1.10) to more than ~200%, there is one placed image that will mostly disappear. What I mean by "mostly" is that little bits of it are still visible, like I masked it carelessly or something. Since this is only occurring with one image it seems that it would be a problem with the image itself, yes? I'm all ears if I'm making a mistake. It is a placed .ai file with no link errors. Should I not be placing directly from illustrator? It renders wonderfully from 100% all the way up to 188%, and then if you enlarge by margins of 1% little bits of it disappear, almost a chunk at a time.
The way I've been exporting is:
File > Export > Adobe PDF (Print)
Adobe PDF Preset: Smallest File Size
Standard: None
Compatinility: Acrobat 6 (PDF 1.5)
Options: Optimize for Fast Web View
Export Layers: Visible & Printable Layers
Compression
I always change the downsampling from [100/150] to [150/225]. I usually leave the JPG image quality low. I leave both bottom boxes checked (compress text and line art, crop image data to frames)
Output
Color Conversion: convert to destination
Destination: sRGB 1EC61966-2.1
Profile Inclusion Policy: Include Destination Profile
However, after reading a few other forum questions I started trying to export as Acrobat 4 so that it would flatten. When I do that, problem #2 still persists although I didn't test problem #1. I haven't tried using Distiller, and using the "prepare for web publishing" action within Acrobat itself makes the PDF too artifacted.
At the heart of my question is this: I am a young designer at an old company that is not necessarily keeping up with the times. I REALLY want to know what the best, most efficient way to export a pdf for web viewing is. Does this exist in InDesign, outside of InDesign? Does it exist at all? Tell me what I'm doing wrong so that I can get better!
Thank you in advance.Show Large Images is a preference inside of Acrobat which might be disabled.
Acrobat - File > Preferences -
Exporting Secured PDF from indesign using apple script
hi there, this is my first go at scripting,
basically what i am trying to do is:
tell indesign to turn on a layer called "proof" in the active document
then export pdf - set pdf preference to smallest file size, all pages, and secure the file WITH A PASSWORD so that it can be opened but not edited (unless by someone at my agency who knows this password). this easy enough to manually, but im sick of typing out a password everytime i save a proof.
then save to a specific folder on the desktop, using the already existing filename - so 'myfile.pdf'
the code below gives me this message "
error "Can’t make name of PDF export preferences into type Unicode text." number -1700 from name of «class DFpf» to Unicode text
could someone please help me word this properly? I tried first referring to a pdf preset instead of setting all the values ie set color bitmap etc but i couldnt get the password to work,
here is what i have so far, written from snippets that other people have tried:
tell application "Adobe InDesign CS4"
tell active document
try
set visible of layer "PROOF" to false
end try
set docName to name
set baseName to text item 1 of docName
set ASTID to AppleScript's text item delimiters
set AppleScript's text item delimiters to "."
set AppleScript's text item delimiters to ASTID
tell PDF export preferences
set acrobat compatibility to acrobat 4 --> create a 1.3 pdf
set use security to true
set disallow changing to true
set disallow copying to true
set disallow document assembly to true
set disallow extraction for accessibility to true
set disallow form fill in to true
set disallow notes to true
set disallow hi res printing to false
set color bitmap sampling DPI to 100
set grayscale bitmap sampling DPI to 100
set monochrome bitmap sampling DPI to 100
--set image quality
set color bitmap quality to minimum
set grayscale bitmap quality to minimum
--set fonts
set subset fonts below to 0
--set security
set use security to true
set change security password to "editedit"
set disallow extraction for accessibility to false
set disallow copying to true
export format PDF type to "/Users/kimwilson242/Desktop/_PROOFS/" & name & ".pdf" without showing options
end tell
end telltell application "Adobe InDesign CS5"
-- prefs belong to app so use in tell app block
tell PDF export preferences
set acrobat compatibility to acrobat 4 --> create a 1.3 pdf
set use security to true
set disallow changing to true
set disallow copying to true
set disallow document assembly to true
set disallow extraction for accessibility to true
set disallow form fill in to true
set disallow notes to true
set disallow hi res printing to false
set color bitmap sampling DPI to 100
set grayscale bitmap sampling DPI to 100
set monochrome bitmap sampling DPI to 100
--set image quality
set color bitmap quality to minimum
set grayscale bitmap quality to minimum
--set fonts
set subset fonts below to 0
--set security
set use security to true
set change security password to "editedit"
set disallow extraction for accessibility to false
set disallow copying to true
end tell
-- now deal with the doc
tell active document
try
set visible of layer "PROOF" to false
end try
set docName to name
set baseName to text item 1 of docName
set ASTID to AppleScript's text item delimiters
set AppleScript's text item delimiters to "."
set AppleScript's text item delimiters to ASTID
-- use flexible path to user desktop… path strings are HFS (colon delimited)
export format PDF type to (path to desktop as text) & "PROOFS:" & name & ".pdf" without showing options
end tell
end tell -
Export to PDF fails for FR - EPM 11.1.2
Looking at server noticed that the HRPrinters1-5 were created but going to non-existant directory d:\hyperion\...\pdfoutput\ Should be going to d:\oracle\middleware\...\pdfoutput. Had to delete hrprinters1-5, edit Oracle\Middleware\EPMSystem11R1\products\biplus\bin\hrcreateprinters.ini and hardcode the correct directory, run hrcreateprinters.exe in same directory, restart printer service, test export to pdf successful.
Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk -
Next_record while using barcoder
Hi All
i am using barcode reader machine i want when i fill a item form barcode reader then it will go to NEXT_RECORD
Please Guide
Thanks And Regards
Vikas SInghalThere is nothing to do with forms. The barcode settings force cursor to jump to next record not actually net record it add enter key press in the last. So, if there is no field in the same block navigable then it will jump to next record.
-Ammad -
SPNego Login fails while using MacOS 10.4 and Firefox
Hello,
we are running an EP6 NW04 SPS 19 on an HP UX. For authentification we
configured kerberos via spnego. This is working fine for all windows
clients and the browsers ie6, ie7 and firefox.
While using Firefox on MacOS X it is not working. We analyzed the error.It is the following
error message in the trace file:
Decoding error in parsing of spnego token.
[EXCEPTION]
iaik.asn1.CodingException: ASN.1 creation error:SPNego OID expected.
Found 1.2.840.113554.1.2.2
As you can see, the mac client is sending the raw kerberos ticket. How
does the WAS handles this ticket?
Kind Regards,
OliverOliver,
The SAP SPNEGO login module supports OID 1.3.6.1.5.5.2 only, which is the OID for SPNEGO protocol, and this is why it is called an SPNEGO login module. It does not support other OIDS such as RFC1964 Kerberos V5 (1.2.840.113554.1.2.2) or NTLM (1.3.6.1.4.1.311.2.2.10). If you need to support other OIDS, and not just SPNEGO then you need to use a different login module. I can help you with that if you are interested since my company has a product (comprising a login module which uses Kerberos) which supports SPNEGO as well as other OIDS - it is not 100% SPNEGO based like the login module available from SAP.
Thanks,
Tim -
Export to PDF Failed "A parameter was incorrect."
How can I get Fireworks CS4 to export to PDF when it gives me this message:
"Could not complete your request. A parameter was incorrect."
This worked a work a couple of months ago, but no longer. (Running Windows XP Pro on PC with 2.2 GHz & 3.5 MB RAM.)
Thanks!I had a button without a link. Breaking appart the button so it didn't expect a link anymore worked.
Maybe you are looking for
-
How to create creative, unique "motion" typography
Hello Apple Support Community friends, Please bear with me, I am new with Motion 5 along with Final Cut Pro X. I would like to learn how to create interesting use of "motion" typography in Motion 5. And how to import the finished Motion project file
-
Issues with rollover buttons in Indesign CS6
Hi, I was wondering if anyone can shed some light on a issue i'm currently having. I've produced a interactive map in Indesign, with rollover buttons which triggers an animation - all the buttons and animations seem to be set up correctly and once
-
Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?
-
Invoking methods on JMX with user defined objects.
Hello, All. Here is the problem description: We need to expose methods on JMX which takes some object of user defined class. We are not able to do that. Meaning, it is not getting enabled and if we invoke through code it says exception with serializa
-
[solved] emacs daemon systemd unit doesn't start
I found instructions on EmacsWiki for a systemd service file for running the emacs daemon at startup. It works just fine on my desktop, but for some reason it doesn't work on my laptop. Here's the service file (/etc/systemd/system/[email protected]):