Export to PDF from Infoview does not show correct data - CRS 2008

I have a problem where users attempt to export a report from the Infoview interface to a PDF. The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values. To troubleshoot, I have tried this on different clients - without a change in the result. I have also pulled the latest instance of the report from this history on the Central Management Console. Interestingly enough, the same thing happens when I export to a PDF from there as well. Any insight or help would be greatly appreciated. Thanks!

Hello,
I can't tell you offhand on what the issue is here, as various factors come into play.
Here are a few troubleshooting steps you can try:
- Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
- Instead of viewing the report and export; schedule a report to PDF and check the results.
- there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
Regards,
Duncan

Similar Messages

Discoverer Report opened from Portal does not show correct data

Hi,
When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly.
Does anyone know what the reason could be for this?
Thank you,
Santoshi

I assume you used the Discoverer Portlet Provider. A discoverer portlet is never live data. When you define the portlet you specify how often to 'refresh' the data. If you skipped this step, then you just get the data as-of when you created the portlet.
Generally you specify the refresh time to be sometime after your usual database load completes.

Export as pdf from safari does not save correctly

I used to be able to print a page and save it as pdf. When I do this the page saved is blank. What is going on? This is since updating to Mavericks.

It happened in Firefox as well and the preview image in the print dialog box was blank. Trashing two adobe pdf plug ins from the /libraryInternet/plug-ins fixed my issue. I am not sure if this will cause me issues in Adobe Creative Suite but so far it looks okay. I am not sure what you mean by /applications/utilities/console How do I get look at the console? I opened the application and I have no idea what to make of the Console.

LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

Hi,
The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item", shows an empty space and a colon ":" and an empty box.
Please let me know if there is any other way to remove the last data fresh without showing the empty space.
We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
Thankyou,
-Sini
Message was edited by: Sini Kumar

Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
first(last(<All InfoProviders under Multi - ROLLUPTIME>))
It uses the earliest rollup time from the last rolluptime of all the base providers.

Export to PDF from VC does not work

Hello experts,
I tried to use the system command to export the VC data to PDF. However instead of opening the pdf file, it opens the selection screen of the BI query. Can anyone help to check the link I used as a hyperlink (as perovided in the SAP how to document)
"pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=" & STORE@REPTNAME &"&BI_COMMAND_1-BI_COMMAND_TYPE=EXPORT&BI_COMMAND_1-EXPORT_FORMAT=PDF&BI_COMMAND_1-SHOW_EXPORT_DIALOG=X&BI_COMMAND_1-null="
Thanks
KS

Hello,
Had a similar problem which was due to some blanks in the formula.
Please recheck if its the same with you.
Rgds

Creating pdf from clipboard does not import images or formatting

Creating PDF from clipboard works perfect in acrobat X however in acrobat XI no images are imported and the text just defaults to times roman font. My wife uses acrobat for her craft patterns and copies from the web all the time with no issues in Acrobat X. She tried it on Acrobat XI and it just looks like garbage. The text is there but the images that were copied along with the text are not. I have examples that she did using the exact same clipboard in both X and XI.

Bill@VT wrote:
I guess I must not understand how you are transferring the items to the clipboard. Is the browser the same one you used with AA X?
Yes, I used the same browser (Chrome) with AA X and AA XI.
Bill@VT wrote:
When I did it with AA XI, I used the mouse (on a PC) to select the text and figures in my browser and copied that info to the clipboard (ctrl-C on the PC and I assume similar on the MAC).
Yes, the procedure for copying info to the clipboard is similar for a Mac and a PC. I select the info (in this case, text and graphics) with the mouse, and can copy it to the clipboard with either Command-C (Mac equivalent of ctrl-C), or by right-clicking on the highlighted info and choosing "copy" from the pop-up window. I do not have to use Print Screen in conjunction with this procedure. If I use Print Screen, it copies everything that my monitor displays and the results of a paste are an image.
Is there something I am missing about getting the web page parts wanted to the clipboard? If you clip the items into a graphics packages, does the graphics show up as desired?
No, you are not missing anything. All of the web page parts are in the clipboard. The problem is that only the text is showing up when I use the create PDF from clipboard option in AA XI. I do not have a graphics package installed; however, if I paste the clipboard contents into Word, both the text and graphics show up.
I checked the PDF created with my AA XI and found the text as text and the the graphic as graphic, not simply a graphic as you suggested. Is it possible the graphic is shown with a place holder or just space for the graphic. If that is the case, check the preferences that you have "view large images" turned on.
As I explained ad nauseum, the PDF I try to create with AA XI using create PDF from clipboard does not include the graphics; it only has the text. I just checked the preferences and "view large images" is turned on. I could not find any other preference settings that would seem to help with the problem I am having.
I can paste the clipboard contents directly into Word and print the document to a PDF. When I do that, though, I usually have to spend a lot of time editing the Word document, because the contents are not in the same format. The paragraphs are usually squashed together, or the photos are too large and I have to change the size. This just takes up more time than I have to spend.
The bottom line is that it seems to me Adobe must have changed something in the Mac version of AA XI that causes it to not work the same way it does in AA X. The PC version is obviously okay, because you are able to get the feature to work.
I guess I am going to have to give up on this problem and stick with using AA X.
Thanks again for all your help.

HT1937 i have a white iphone 4 that says it was approved but restoring from itunes does not show (congrats unlocked message)

i have a white iphone 4 that says it was approved but restoring from itunes does not show (congrats unlocked message)
hel

MaDCrackeR wrote:
Email from AT&T says the IMEI number was approved for unlocking
..........4S that worked fine and it shows the message "congrats unlocked" in itunes
When restored. But the 4 does not. AT&T insists its unlocked but they are only going off
Of the request and IMEI number. Is there a way from the phone i can verify it was unlocked?
If AT&T e-mail says it is unlocked, then believe it is so. Insert non-AT&T SIM inside and after backing up restore in iTunes again. Unlock gets attached.
You can check the status of the unlock request on AT&T web-site.

Sometimes JavaFX form (BorderPane) does not show correctly

We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
Additional information:
the form (BorderPane) is loaded during application start-up but it is not shown initially,
to show the form we remove previous contents from a StackPane and add the form instead,
to hide the form we do the reverse.
Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

I am unaware of any such issue being reported previously.
Without a reproducible test case, you are unlikely to get much assistance.
Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
There were many bug fixes implemented for Java 8.
I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
If the issue still reproduces, create a bug report which includes your test case and full environment details.

Site does not show correct on Samsung Tablet

Hi all,
I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
cheers,
Larry

Hi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
Both of them has got android 4.04
See the image with the specs in which it loads correct.(white background)
And here the specs of a older one (dark grey one And arround 3 years old)
And this problem occurs:
So on a newer tablet it shows correct.
Verstuurd vanaf mijn iPhone
Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
Re: Site does not show correct on Samsung Tablet
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi Larry
Please let me know if there is any specific page element not showing up correctly on Tablet.
Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
The device details would also help.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

The web site of Adobe does not show correctly in FireFox

I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?

Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris

Bex report does not show loaded data at once

Hi experts,
Why Bex report does not show loaded data at once after loading is finished but after some time?
Could be the reason of it:
a) huge amount of data in infocube.
b) there are no deleting/creating indexes before/after loading, because it takes too much time
c) anothe reason?
Thank you,
Tigr_Z

Hi Tigr,
A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
C - it can be resource issue, so please look into all and double check with basis if thats the case.
Regards
Sunny

Dreamweaver codes does not show correctly

Hi, i have a problem with dreamweaver.
İ use last version Adobe CC. When i use dreamweaver for my job, codes does not show correct.
look ss please. letters cut of middle. look letter "g" "j" "y " Look MysQl letter. you see "y" is cut of
Thank you for help.

Are you using frames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:f9hns3$soa$[email protected]..
> FlashRenaissance wrote:
>> When I try to preview my .html pages in Dreamweaver
8 it does not know
>> the page. The only thing that shows up is a page
that "Cannot be found"
>> with a strange extension (TMPztriqmk5y3.htm).
>
> See the TMP at the beginning? It stands for temporary.
>
>> Any suggestions on how I can get the pages to show
up again in preview
>> mode? Maybe something went wrong in the preferences?
>
> Go to Preferences, select Preview in Browser, and
deselect the option to
> preview using temporary files.
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

Webi does not pick correct Data

Hi Guys,
I have a webi. The Universe for the Webi is based on Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
I have checked following points already:-
1] No Resstriction at Query Level
2] No restriction at Universe Level
3] No Filters/ Restriction at Webi Level.
Can anyone suggest whats happening?
Regards

Hi Ray,
It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
This will give you the idea about aggregation.
Regards
Vineeta

Drop Down In List From Lookup Does Not show all items in mobile view

I have list called "incident".
I have a list called "locations"
The "incident" list looks up a value from the "location" list as a dropdown.
The location list contains 25 building names.
When I try to fill out the "incident" list in mobile view
the "location" drop down only shows 16 items. I checked the "locations" mobile view limit and set it to 99 to make sure all would show up.
The desktop view for the "incident" list shows all 25 buildings from the "locations" list.
Any advice on how to get those extra 7 locations to show up?
Jef

Still don't have an answer. I'm now looking to use a radio button or something to use as a work-around. If I use a lookup and tell it to allow multiple selections (shows as checkbox) it does not show all values in the mobile view.
If I input each item and choose choice, it only shows up as dropdown. I need radio buttons. If I choose lookup and allow multiple selections, it does not show all the options.
I need some help on this.
Jef

Export to PDF from Infoview does not show correct data - CRS 2008

Similar Messages

Maybe you are looking for