Export To PDF with OLE Objects/Word

I got a report that has several OLE Objects that are each linked to a Word document.
Upon viewing the exported file, you notice that these objects have lost resolution and do not appear as clearly as they did in the report designer.
Upgraded to SP 4. The issues is still happening.
The issue happens when the linked word doc is right justified.
Any idea what causes this?
Using Crystal Reports 11.0.0.2495
Using Word 2003

you may try following things:
1. Put crystal on the highest level of service pack(SP 4) and then check fro the results.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
2.Suppress each section one by one (where these ole objects are placed) and then check whether a particular object is causing the trouble.Also, it will be clear if this issue is really due to ole objects or something else.
3.you are currently on release 1.If you have a chance to test this on release 2 or CR 2008 then it would be better.
Could you please explain what you exactly mean by fuzzy/distorted.I mean, do the objects/text appear blurd/misalligned or what.

Similar Messages

JRC for Eclipse 2.0: Export to PDF with Flash Objects in RPT file

Hi,
We've a few reports created with Flash objects in it ( from Xcelsius). We are trying to generate the reports and export it to PDF using the new JRC for Eclipse 2.0. The exported file size is big ( 600MB) but there is no flash object or data in it. Can you please help us with this one?
Thanks,
Bala

Hi, Ted. Thanks for looking into this.
I asked a similar question last September in this [thread|CR report with embedded SWF: Export to PDF displays nothing;. It's my understanding that exporting flash objects to pdf is not support in CR 2008.
In CR 2008, when I export a report containing a swf to pdf, the flash file is not rendered in Adobe Reader. It looks like there's just a picture. In fact, in CR, if you r-click on the swf and do Format Flash... | Flash, you can change the picture used for export and printing. The default picture is what I'm seeing in the pdf.
I'm creating the swf using Xcelsius 2008. In XC 2008, if I export to pdf, the flash object is rendered. Why the difference?
The same Adobe reader is being used in both cases.
I'd be glad to send an .rpt with embeded swf for you to test.
Thanks again.
Tim

Report with OLE Object Problem (Crystal Report 11)

Post Author: ibertola
CA Forum: General
Hi all,I'm a new user, and I've got a problem with OLE object. I would like to have a report that show me ONLY one of many OLE (word document) in Crystal structure.I've created 3 section detail, and in each one I've insert OLE object (creating from a file, and LINK).So, if I change one document stored locally, and then refresh the report, the content doesn't change like the linked file! Actually I've got all locally Please help me.

CR XI r2 is not supported on WIN 2008. See the [supported platforms|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
documentation and [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki.
Ludek

I am trying to export a pdf and convert to word and it is not allowing me to sign in

I am trying to export a pdf and convert to word and it is not allowing me to sign in

See this picture. I am trying to Sign in in the upper right hand corner and
it just blinks it does not open up the sing in
From: Sara.Forsberg
Sent: Tuesday, January 20, 2015 11:35 AM
To: Jennifer Casali
Subject: I am trying to export a pdf and
convert to word and it is not allowing me to sign in
I am trying to export a pdf and convert to word and it is not allowing me
to sign in
created by Sara.Forsberg
<https://forums.adobe.com/people/Sara.Forsberg> in *Adobe
Acrobat.com Services* - View the full discussion
<https://forums.adobe.com/message/7114040#7114040>

I can't export a PDF scanned file into WORD, help please.

I can't export a PDF scanned file into Word, please help.

Hi solarpowerprincess,
Are you having trouble signing in to your subscription, or having trouble converting files once you're signed in. If you can't sign in, it could be that your subscription just hasn't finished processing yet. Please let us know if you're unable to sign in and we'll go from there.
Best,
Sara

Exporting to pdf with new numbers app

recently i upgraded from numbers 09 to numbers 3.0. i have a worksheet with 2 pages. with numbers 09 when i export to pdf it export as pdf with 2 pages works fine. but in numbers 3.0 when i wxport the same worksheet it combines both pages in one pdf page so i can't print it on 2 pages. any solution ?

Vikas
The solution is to Print to PDF rather than Export to PDF.
You will see that there are two pages in the Print dialog preview, and when you choose PDF, Open in Preview, you will see that the PDF version of the file has two pages.
Jerry

Really struggling to export adobe pdf to a microsoft word format so i can send onwards as email attachment

really struggling to export adobe pdf to a microsoft word format so i can send onwards as email attachment

Why would you need to do that? You can attach a PDF to an email directly...

How to keep embedded PDF's in an MS Word 2010 document during export to PDF with PDFmaker

Hi,
I am preparing in MS Word 2010 a Software Manual with embedded PDF's
When I double click in MS Word on the inserted PDF, Acrobat opens the embedded PDF (these are A0 CAD Drawings).
I want this functionality also after I have converted the MS Word file to a PDF with the PDFMaker add-in (Acrobat X Pro)
Is this possible?
Greetzzz,
Gerben

No. PDF files cannot be embedded within the pages of other PDF files.
What you could do is attach the other files after the PDF has been created, then manually link to those attachments in Acrobat.

Problem with ole objects

Hello to all,
I'm having a problem concerning the use of ole objects.
I'm using Oracle Forms 6.0.8.16.0 with Oracle Reports 6.0.8.1.7.1 on Windows 2000 with Oracle Database Server 9.2.0.4.0.
I have several forms with base tables including blob columns which are used to store ole objects. These could be MS-Word-documents or Bitmaps of signatures. When inserting these objects via "create new" and choose the object type, Word or Paintbrush opens and i can create my objects. After committing these changes to the database, these objects are printed in a report correctly. When inserting these objects via "create from file" or using a push button which is executing "initialize_container" with a file and committing to the database, i get an error while executing the report "REP-0082: Error executing SCA utility".
I want to use a push button to store my ole objects because the "create" dialogue is confusing our users because there is a huge list of all possible ole objects on the client.
Can anybody help with this ?
And to the Oracle Team, please don't suggest simply to upgrade to a higher patch level without looking at the problem. First, I tested all patch levels up to 16, with no change. Second, it's not easy to upgrade for an 24x7 application with hundreds of users in different countries with different ways of deployment.
Regards
Kai

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

How can I export this pdf into a readable word?

Dear all,
I am trying to export the following pdf document into a word document :
However, here is what I get: Db bte earf>eltung ber rf enntniff e, bie aum mernunf tgef d)de g ören, ben fid)eren @ang einer iff enfd)a gee ober nid)t, baß läßt fid) f>alb au bem @rfolg beurteilen. etc.
Instead of: Ob die Bearbeitung der Erkenntnisse, die zum Vernunftgeschäft gehören, etc…
Does anyone know how I could solve this issue?
Thank you very much in advance,
Pierre

Have you started with a scanned document and then trying to go to DOCX. If so, you may have OCR set on the document before the export and it may be that the OCR can not recognize the fonts. However, the recognition appears to be based on typical block characters and I might interpret them the same way. You can try to change the primary language to German in the OCR, but that will likely not do the job. I suspect what you need is something that recognized old-German as this document appears to be (if I got the language wrong, I apologize). I am not sure Acrobat is up to the task on the type style, but is comparing to standard block characters. Some of the dedicated OCR packages might be able to do a better job.

Problem while exporting to PDF with japanese character in Crystal Report X1

Hi,
I am using Crystal report X1 with classic ASP on a Windows 2003 Enterprise Server, SP 2. In my application, I have to export the report into PDF, CSV, DOC formats. I am have Japanese strings in the report. While exporting to PDF, empty boxes has displayed in the place of Japanese string and in CSV file, question mark has been displayed instead of Japanese string. But the Doc file is exported correctly. I have not installed any language support software either in server or in client machine. I have used MS Gothic and Arial Unicode MS fonts for the text-objects which has Japanese strings.
Please give me a solution so that I will get PDF file with Japanese strings instead of empty box or question mark.
Do I need to install any language support pack software?
Thanks in advance.
Regards,
Manju

Hi Don,
Thank You for your reply. I have resolved the issue of exporting to pdf from crystal report X1 having Japanese data after installing the language pack.
But when I am exporting to CSV or TXT, i am getting ??? instead of Japanese characters. I have tried "export" through crystal report designer and got ??? instead of Japanese.
The Crystal report version I am using is Crystal report X1 11.0.0.1282
Crystal Report Desinger is installed in Windows Xp machine
Font set for Text object is Arial Unicode MS, MS PMincho, MS PGothic
Does the Crystal report X1 11.0.0.1282 has the UTF-8 support for CVS / txt
Please provide me a solution
Thanks in advance,
Regards,
Manju

InDesign CS6 Export to PDF has missing objects

When exporting to PDF, I have a 6-page document that has missing objects from the master.
Here's the document with the content removed:
lab.cyke.net/pdf/MissingObjects.pdf
The first and last pages were constructed correctly. All pages in between are screwed up. Any ideas?

@Jongware – I have a case with InDesign CS5.5 7.5.3 on Mac OS X 10.6.8 where master pages based on each other lead to false representation of page objects.
Not only in pdf export, but also on the actual InDesign pages. Made an IDML from it, opened that in InDesign CS4 and the error was gone.
This problem is documented at the German-Swiss forum "HilfDirSelbst" at:
http://www.hilfdirselbst.ch/gforum/gforum.cgi?post=496285#496285
Some screen grabs together with the IDML are attached there.
After opening the IDML from InDesign CS4 with the error gone, I exported another IDML from CS4, opened that in InDesign CS5.5 7.5.3 and the error was present.
To detect the error look at pages 1* and 4 of the mentioned screen grabs.
Uwe
//EDIT: *the screen grab of the pages palette of InDesign CS5.5 shows the error on page 4 only. The error is present outside of page 1 as well, but cannot show on the screen grab.
Message was edited by: Laubender

Can't export a PDF with XFA form

Cannot convert/export a PDF document containing an SFA form - can this program not do this?

Hi Morin27,
XFA forms are not regular PDF's but XML files in a PDF shell.
To create a word file from those files, you first have to flatten the XFA forms by printing as PDF with the Adobe PDF Printer.
Then you can save using ExportPDF the created static PDF as Word document.
~ Pranav

Is possible to save a vector.pdf with smart object?

Hi PS masters
I am finishing a poster, fully created in shapes in illustrator. Due to customers request I was forced to do some color corrections so I decided to use my PhotoShop CS6.
I imported vector files into my photoshop as smart objects, added some adjustments layer, few vector masks and I changed their layer style to get the finest result.
When I finished my work in PS I tryed to save this as .pdf
In my .psd there are shape layers, some groups and some adjustments layers with layer masks and changed Layer style to "color", one text layer and 3 smart objects imported from illustrator.
I want to keep my image scaleable for bigger resolutions.
... So I was trying to save this file as Adobe PDF but I found that whole graphic in exported .pdf was converted to raster, besides the border, cut marks and that one text layer.
I think that this is becuase of smart objects. (saving as .pdf without them works pretty good)
Now finaly my question. Is somehow possible to save this document from photoshop as vector.pdf? or is possible to import group of shapes from illustrator to photoshop as shapes in photoshop? no as smart objects.
I am running out of time so I saved it as high res .Jpeg, but I want to know if this is somehow possible for future use or If I have to rather avoid that solution.
Thank you very much for your reactions
// I just thought if I can use InDesign for that. Will be included .pdf file as raster? or it will stay scaleable even with smart objects in it?

I am sorry but I don't have vector files right now (I'm on another PC), but I can show you "old" version of a poster, where you can see parts of their structure

How can I Export a PDF with Hebrew Font

I am having trouble exporting a PDF file with a Hebrew font into word document.

Sorry for the long delay in getting back to you! I must have missed your original post.
Unfortunately our ExportPDF service doesn't support Hebrew text. You can vote for this feature in here: http://forums.adobe.com/ideas/1554 We use the Ideas section to help prioritize features.
-David

Export To PDF with OLE Objects/Word

Similar Messages

Maybe you are looking for