Export to ps does not support image format

I have just moved all my images to a new HD as the old one was failing. I have relocated the masters but when i then try to export to photoshop it has an error message saying Error, can not be rendered for editing because aperture does not support the image format???????
Any help greatly appreciated.

ANYONE!!! Have now just imported new files from my CF card and again cant export -
When trying to get the images to open in Photoshop, I y got this Error message This image cannot be rendered for editing because Aperture does not support the image format.
I am not sure why this has happened as it has been fine up until now?
Thanks

Similar Messages

Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

I uploaded an rtf (word) document to icloud, but when I try to open in Pages, I get a message that it does not support rtf format. What is going on?

I uploaded an rtf (word) document to icloud, but when I try to open in Pages, I get a message that it does not support rtf format. What is going on?

Supported file formats for iOS Pages
Import:
Pages ’09 for Mac
Microsoft Word - Office Open XML (.docx) and Office 97 or later (.doc)
Plain Text files (.txt)
Export:
Pages ’09 for Mac
Microsoft Word (.doc)
PDF
As you can see - .rtf is not supported.

[svn:fx-trunk] 12077: Although Spark RichText does not support link formats , modifying compiled FXG to not generate ActionScript code that will cause compile time exceptions .

Revision: 12077
Revision: 12077
Author:   [email protected]
Date:     2009-11-20 18:16:32 -0800 (Fri, 20 Nov 2009)
Log Message:
Although Spark RichText does not support link formats, modifying compiled FXG to not generate ActionScript code that will cause compile time exceptions.
Removing references to Flex Builder 3 in RPC.
QE notes: N/A
Doc notes: N/A
Bugs:
SDK-24305 - Link format property nodes cause errors on RichText in FXG 2.0
SDK-24322 - A couple references to Flex Builder 3 in Flex 4 LangRef (and code comments)
Reviewer: Deepa
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24305
    http://bugs.adobe.com/jira/browse/SDK-24322
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/xml/XMLDecoder.as
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

I have a Nikon D7100 I have tried to open a raw file but it staes it does not support the format. I am up to date on all downloads.

I have Nikon D7100 and shoot in raw. I have tried to open a raw file in elements 10 but it states it does not support the format. I also have a D800 and these open file in elements camera raw. Can anyone help please?

Hi,
You need version 7.4 or higher to read raw files from, a D7100. Unfortunately, ACR 7.4 is not compatible with PSE 10.
You need to either
- update to a new version of PSE or
- download the DNG converter - use it to conver your NEF files to DNG files which can then be read by PSE 10.
DNG Converter 8.4
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739
MAC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
DNG Converter 8.3 (if running on XP or Vista)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
Good luck
Brian

Device type does not support page format

Hi All,
There is one issue when I print a sapscript. I get an error message as follows:
Device type EPESCP9 does not support page format ZSG02
Could someone advise?
Thanks
Alice

Hi,
The page format ZSG02 is not present in Device type EPESCP9.
in SPAD t.code add the page format in that device type.
Better inform to BASIS people they will add page format in that device type.
Refer the link Device type does not support page format
Regards,
Dhina..

ITunes does not support audio format of iTubes store song

I downloaded some songs from the store but some of them say that they cannot be copied because the audio format is not supported by my iPod. The songs do not play in iTunes either. I have a nano with the latest update. What is happening and how do I fix it?
iMac Mac OS X (10.4.9)

Contact the iTunes Email Support with the names of the songs using the link at the bottom of this page:
http://www.apple.com/support/itunes/store/authorization/
Songs from the iTunes Store are in ACC format & should play in iTunes & on your iPod...So it sounds like the songs didn't download correctly.

Export to RTF does not include images???

Hi,
I ve written a script which converts a batch of indesign files to RTF files...I m using this script in a plugin in InDesign CS3 on MAC OS.
I ve used this:
exportFile(ExportFormat.rtf, f );
But the converted .rtf files does not include the images present in the .indd files...
what modification should be done to include images? is it possible?
Someone pls guide me...
Thanks.

No, that's not possible. The best you can do is to replace the images with their file names, then import those images in the application that you send the RTF files to.
Peter

Aperture does not support Pentax K 3 RAW format. Any advises?

I just bought a Pentax K - 3 camera. Aperture does not support RAW format. Does anyone else have the same problem? Is there going to be Digital Camera RAW Compatibility Update for Pentax K 3?
I would be very pleased if someone could give me some advise,
Heikki

Only Apple knows when and if a specific camera's Raw format will be supported and they never say before they release the update.
In the meantime there a few different ways to work around this. One is to shoot Raw & JPG and use the JPG now and the Raw if and when the camera is supported. The other is to convert to DNG.
In the meantime let Apple know you want support for the camera, Aperture->Provide Aperture Feedback. Don;t know how much good is does but it can;t hurt.
regards
The list of supported cameras is here http://support.apple.com/kb/HT5955
Message was edited by: Frank Caggiano

Help...people picker control does not recognize outlook formated bulk users

Hello,
Currently out of the box people picker control provides a textbox, User validity icon and a find user book. If there are bulk of users from outlook and paste it, the SharePoint control does not recognize user and cant find bulk
users in the find book directory all at once(need to find user details one at a time) , so I was told to hide the user directory icon and link. Will you please suggest me to on how to hide directory icon? is there a way using JavaScript or Jquery to hide?
Otherwise if there is a way to directly transfer bulk of users from outlook into SharePoint people control works great.
multiple users allowed in sharepoint people picker control however it does not support outlook format in SharePoint people picker.. such as
'abc, xyz <a href="mailto:[email protected]>' ; efg, pqr <">[email protected]>' ; efg, pqr <[email protected]>
Can anyone suggest me to hide the finder link & image? also to add bulk of users directly from outlook?
Thanks

Nobody has anwered. I have solution and done myself to hide and manage controls on SharePoint list. Key thing here is to map the jquery library correctly and specific version.
Hope this helps at least others and can overcome difficulties I have undergone
Here is the Javascript:
<script type="text/javascript" src=".../jquery-1.3.2.min.js"></script>
<script type="text/javascript">
$(document).ready(function(){$('a').each(function(){if($(this).attr('title') == "Check Names")$(this).hide();});});
</script>

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

This image cannot be rendered for editing because Aperture does not support

Editing Error: This image cannot be rendered for editing because Aperture does not support the image format.
I have been having this issue when trying to open photos in CS4. It only seems to be affecting images from the last year or so, although I'm using the same cameras (Canon 7D, 5D, and S90) as before. My library is large, going back to year 2000, and all the older images seem to work fine, but most all of the recent files display this error when trying to open them is CS4. I've tried the methods described in other threads and on the support website, namely starting aperture while holding option and command, pulling up the options to rebuild the library in various ways. I've done all three options, the last two twice, with no change. This is very frustrating to not be able to use the program in the way I had planned... Any ideas? I'm wondering if my library is simply too large- although I'm not sure if breaking the library into smaller chunks is the best way to go. I prefer having all my photos together. I have found that iMovie fails to operate properly when events get too large. Is this a similar problem?

Again, thanks for the input. As for the first suggestion, when I import without renaming they all work, but as of late, all appear to work no problem. It seems like it was a block of time from roughly October 2009 through November 2010 where most all the files imported during this date demonstrate the problem. As for the second suggestion, I've tried both 8 and 16 bit TIFF and PSD file types selected in the editor preferences, with no luck.
My next move has been to relocate the offending files out of their current location to another location (they are referenced, not managed). In doing this, I encountered what seems to be a file access or privelege error message, although about 20% of the files were moved, and in doing so, it seems to have solved the problem for those. But I don't have a good way of isolating the involved images outside of Aperture, and I don't want to move them with Finder anyways since that would ruin the referencing.
This bug is getting so complicated I'm ready to throw my hands in the air and just go back to Lightroom. Aperture has so much potential, especially in regards to integration with ipods, iPads, other Macs, etc. but in the 4 months I've been using it, I have spent WAY more time addressing buggy issues like this one than the amount of time supposedly saved using Aperture instead of Lightroom.

I cannot copy and paste details from my bank statement into a word document, without the formatting changing.I have a message in my Error console which reads: server does not support RFC 5746, see CVE-2009-3555

Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.

Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

Thunar does not recognize image file formats

Hi Archers,
My problem is that I use XFCE4 with Thunar file manager and Thunar does not recognize image file formats. I mean for example JPG format is an executable application fromat according to my Thunar, but I'd like Thunar to recognize JPG format as image or bitmap format appearing with small preview of the image.
Any help is appritiated!
gellb

Yes, I did.
Activating Show Thumbnails button in Preferences of Thunar does not work.

Error when trying to re-mount a VHDx (the version does not support this version of the file format)

Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
Maike

Hi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway!

Export to ps does not support image format

Similar Messages

Maybe you are looking for