Export to quicktime best (and only) way to go?

I have a 160 gb Apple TV. I use a Canon HG 10 1080 X 1440 AVCHD. In FCE the only good way to export (that I've found) is export using quicktime. But it takes only about 90 or seconds or less of video exported to consume one gigabyte of disk space-- an Apple TV can only accommodate perhaps 2 or three hours of FCE exported video plus all the other stuff I've got on my Apple TV.
In FCE I have tried compressing to high definition MP 4, playing with the various settings, but it doesn't seem to come close to export using quicktime. I've incrementally tweaked every setting and lots of combinations of settings and nothing seems to come close to straight quicktime.
So I guess the best (and only good way?) way to export hd video from FCE is with straight quicktime?
Are there any media players with gigabyte hard drives that can play .mov files? I don't think there is adequate room on Apple TV-- the hard drive is way way too small. You can't keep more than a couple hours of hd videos there.

The reason you can tell the difference between Quicktime and Quicktime Conversion is, as I've said before, because Quicktime Conversion compresses the video whereas Quicktime Movie leaves it uncompressed.
FCE is a single program, FCS is a whole suite of programs that include Final Cut Pro for editing, Color for color correction and such, Motion for motion graphics, Soundtrack Pro for specialized audio editing, DVD Studio Pro for DVD authoring, and Compressor for compressing. I believe what you mean when you ask about exporting is whether the compression is different in Final Cut Studio. Because FCP can export to Compressor for advanced options of compressing, there are many more ways to export than in FCE.

Similar Messages

Best and fastest way to export HD Video

What is the best and fastest way to export HD video once I have finished editing it. I shot the footage in 720p30 on an HD camera, now I am just looking for the quickest way to get this out the door, any ideas?

And compressing DVCPRO HD to DVD isn't a quick process. it took me 13 hours for 90 min. With the specs you see below.
But to us, it is worth every minute.
We see a qualitative difference in DVDs whose source is 720/24pn on our component out DVD player to a Fijitsu plasma.
I swear that it is not much different than the original DVCProHD footage out the component of the cam.
Shane is responsible for educating and encouraging us to move to the HVX200.
We intend, of course, to send the purchase price bill for cam and cards to him.

What is the best and safest way to convert songs from a dvd to an audio MP3?

What is the best and safest way to convert a song/or songs from a dvd to an audio MP3? Are there any free safe converters?
I have some live music from a concert (currently available on dvd only) that I want to convert to MP3 ... playable on my iphone.
Thanks!

Java float; IEEE 754 single precision has 32 bits: 1 sign bit, 8 bits of exponent, 23 bits for the mantissa.
Java double; IEEE 754 double precision has 64 bits: 1 sign bit, 11 bits of exponent, 52 bits for the mantissa.
When you widen a float value to a double this is what happens to the bits
   float: s y   xxxxxxx mmmmmmmmmmmmmmmmmmmmmmm
   double: s y???xxxxxxx mmmmmmmmmmmmmmmmmmmmmmm00000000000000000000000000000try this
class Widen {
    public static void main(String[] arg) {
        float f = (float)Math.PI;
        if (arg.length>0) {
            f = Float.parseFloat(arg[0]);
        double d = f;
        StringBuilder sf = new StringBuilder(toBinaryString(Float.floatToRawIntBits(f)));
        StringBuilder sd = new StringBuilder(toBinaryString(Double.doubleToRawLongBits(d)));
        sf.insert(1+8," ").insert(2,"   " ).insert(1," ");
        sd.insert(1+11," ")                .insert(1," ");
        System.out.println(sf.toString());
        System.out.println(sd.toString());
    static String toBinaryString(int i) {
        return toBinaryString((long)i).substring(32);
    static String toBinaryString(long l) {
        StringBuilder sb = new StringBuilder();
        for(int i=63;i>-1;--i) {
            sb.append(((l>>i)&1)==0?'0':'1');
        return sb.toString();
}Please point out where you think there is loss of precision.

Best and secure way to connect 2 cores

Hello,
I would like to know the best and secure way to do that :
PIX2 ethernet 0.1 --> Catalyst 3750 --> Catalyst 4006 --> PIX1 ethernet 1.1
the catalyst 4006 is the VLAN manager both of the pix use subinterfaces
for the moment i configured the interface on the 4006 as trunk but i am not really good with prunning allowed vlans
Can you please give some help ?
Regards,

sorry because i am french ;) what i want to do is to share only one vlan between the C4006 which the vlans root and the C3750 because i use virtual interfaces on my Cisco PIX's so vlans need to be configured.
What i don't want to do is to allow other vlans on the C4006 to be distribute through the C3750 which has already some vlans that can have the same vlans id.
Regards,

What is the best and easiest way to speed up a Mac-MINI?

What is the best and easiest way to speed up a Mac Mini without adding memory?

I'd tried to reply yesterday to your question but for some reason it didn't go anywhere and I got a red message box in the Discussion post area with "error." After trying three times, including log-out, clear cookies from browser (and history) and back in, I still was unable to add my post with links to resources for your Mini, here. And the last time I tried that, the copied text also went missing as I found it gone after considering to make a Text document of it, for later posting.
Anyway, the http://iFixit.com site has guides on how to replace RAM in the computer you have. Note there are different models shown and from what I remember, yours is the last 'old look' Mini with an optical drive. The model after that is thin, a 2010 model with slot in front for discs; the next one has no internal optical drive.
RAM specs: 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM (replace pair) up to 8GB total. Best price would be an online vendor of repute, once you know about what they sell for, you could ask a local mac expert if they could get you a better than retail price. I get ram from OEMPCworld and shipping is about $1. including insurance to my post office box, priority or 1st class. At about half retail. Crucial (website) offers parts, too; and so does OWC (other world computing).
In addition, I recommended checking into the build specs and quality of the OWC (esales) site for external enclosures with their own power supply, for hard disk drive; for storage and bootable clones on different partitions. And see about Bombiche Carbon copy cloner, it is a commercial product now, not donationware. I've used it successfully to make competely bootable clones on a suitable external HDD (drive should have own power supply, too) A 750GB HDD in a self-powered enclosure that can boot Mac OS X from a clone, is a good start on backing up your upgraded OSX in a way you can clone it back into an empty, wiped or new HDD inside the computer; and it can run from the external. You can't necessarily use a TimeMachine that way.
This should be your Mini -- check other indicators to be sure:
http://www.ifixit.com/Device/Mac_Mini_Model_A1283
A serial number lookup site such as the one I end up using because I had it bookmarked is OK: http://www.powerbookmedic.com/identify-mac-serial.php & also have mactracker http://mactracker.ca
Anyway, before I time out or exceed post content(?) This is not all I meant to write before.
Good luck & happy computing!

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG filesZ?

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG files?

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG files?

What is the best and safest way to clean my iPad screen?

I have had my iPad 3 for a week and I love it! I want to keep the screen in good condition. I am getting a cover, but I was wondering what the best and safest way is to clean the screen. Any suggestions? Thanks!

http://www.theipadguide.com/faq/what-best-way-clean-my-ipad-screen
 Cheers, Tom

What is the best and safest way to clean my computer screen...fingerprints, etc.,

wjhat is the best and safest way to clean my iMac screen (fingerprints, etc,)

Read the user manual that came w/your iMac - cleaning/care instructions section.

Best and easiest way to Overclock?

Been thinking lately about power management for my phone, with regard to saving the battery when I am not using much, and then maybe getting a bit more oomph when I need it.
What's the best way to achieve this, preferably with a GUI instead of X Terminal and SUDO rights (still a little scared of that one)?
I've installed a few Kernel things and CPU Freq apps too, but I am not sure which is the best and the easiest to implement.
Any help would be greatly appreciated...
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

richwhite wrote:
Ceroreoberts: when a new kernel is released is it auto updated? I had no update flashing in the status bar about it. And if we have to update/download manually does it affect our settings or seamlessly integrate in the background?
CPUFreq widget isn't actually meant to drop to 125. I spoke to the developer about it and he thought it was strange mine was at 125 and said it was because i was using a custom kernel, then he updated it and asked me if it still went that low, which it did. Anyway, it always dispalyed 125 but Conky showed it at 250, so i wonder if it just tells 125 on a custom kernel but actually doesn't change the minimum freq
the kernel should autopopulate, though this latest update installed seperately and still left the previous one there with a note to uninstall it.
this is probably because i believe he included thedrives for the fcam support to be integrated in this build rather then a seperate install.
but normally, it does it automatically.
i use xterm alot and just do a quick apt-get upgrade from time to time to check what has been done.
you can also do an apt-get update in xterm and it will update your repos.
as for the cpufreq.....there are two different ones...named very close.
i have both installed.
the first one is cpufrequi.
this one is a drop-down type that i use mostly. and i am not sure, as it doesnt show it, that it auto-drops the low to 125mhz. but conky confirms that. (this may also be because i have both installed)
the other is qcpufreq.
this one has a slider that you can change the high freq from 125mhz-1150mhz. but it actually shows you that the low is automatically 125mhz.
this low freq is most likely because of the kernel i am using, which is very stable, and anyone can install it from the repos as stated above. it is the one that i use.
NOTE- though, i have been forgetting to actually OC my device lately because the black plastic theme is just awesome and fast, especially combined with the custom transitions settings applications all set to 10.

When exporting to quicktime audio and video out of sync

i am trying to export a small four minute movie to quicktime. the movie plays back fine in the timeline but when i go to export to quicktime, some of the audio and video is out of sync and it semmingly looses a second every now and then. very wierd. the project plays back flawlessly in the timeline, but when i export to quicktime using quicktime conversion the above occours. any tips, suggestions would be greatly appreciated. thanks.
Mac Pro Mac OS X (10.4.9)

don't use quicktime conversion. use 'current settings',
x

Export with all objects and only some table data

Hi,
can we use exclude and include both at a time.Because I want export full schema but data required only some 5 table, Is it possible.
please share expdp and impdp query.
Regs,
Brijesh

Hello,
can we use exclude and include both at a time.No, EXCLUDE and INCLUDE are mutually exclusive.
I want export full schema but data required only some 5 table, Is it possible.You can make 2 separate Exports:
- *1.* With the metadata only, by using the parameter below:
CONTENT=METADATA_ONLY- *2.* With the Data of the 5 Tables.
The _1st Export_ will let you have all the Objects of the Schema but you won't have any rows.
For this _2nd Export_, you may use the INCLUDE parameter so as to select the 5 Tables for which you need Datas. As previously posted, the QUERY parameter let you apply a filter on the rows for each Tables. By that way you'll have only an extract of the content of the 5 Tables.
NB: The use of a Parameter File is recommended so as to manage better all the Parameters you need, and avoid some troubles with some special characters.
Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Apr 19, 2011 5:43 PM

Export to Quicktime Movie and end up with Final Cut document

Exactly this is happening. Yesterday no problem, today I can not export. Using Quicktime Conversion is also hopeless. How do I remedy this? Thanks, and please be simple--I am the Idiot for which the Idiot Books were written...

"today I can not export"
What happens when you export?
"Using Quicktime Conversion is also hopeless."
What happens?
Exporting to either Movie or Conversion produces a QuickTime file. The only difference is that a QuickTime Movie has Final Cut as the creator type. Both can be used in any QuickTime application on any Mac that has the appropriate codec.

What is the best and easiest way to upload a big file from an AIR app to a server?

hello everyone
i am a self-teach-as-i-go kind on person, and this is my first encounter with uploading to a server, websites and all
i have written an AIR app in which the user chooses pictures from his/her computer and fills out numerous forms. at the end i want to upload all this data to my server
currently, all the data folder gets compressed to a single zip file (using noChump zip library). i did this for simplicity reasons (uploading only a single file) - the size is the same. this files can get up to 200mb in size
as a server, i have one domain I have bought and currently only a small space (1G - basic). I control it using Parallels® Plesk panel (default from the company i bought the domain and space from)
I have no knowledge other then as3 (thanks, OReilly!), so i thought of something that doesn't require server side scripting.
after messing around a bit i found the code at this question: http://stackoverflow.com/questions/2285645/flex-crossdomain-xml-file-and-ftp
(thank you Joshua). please look at that code, basically, it uploads through a socket
I fixed it up a bit and was able to upload a 64mb zip file to my httpdocs folder in my domain. this included hard coding my username and password
looking at my site managing panel i see the file created and expanding in size, end at the end i even dowloaded the zip and decompressed it - all well.
my questions are:
the upload continued even when i exit my air app! how does this work?
i cant get progress events to fire (this relates to question 1).
this domain also holds my web page. is httpdocs the correct folder to put in user data? how do i give each user their own username and password?
is this the right way to go anyway? remember file sizes could reach 200mb and also, secure transferring is not a must
hope you guys can make sense in the mess
cheers
Saar

Google search.
iTunes does not sync with non-Apple devices.

Problems whit save/export in quicktime preview and textedit

After upgrading to 10.8.2 the save and export boxes are not displayed correctly ... I can not save and documents pile up
In the screenshot you can see how it shows the save box

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

What is the best and easiest way to get xml data into the rtf document

Hello Frenz
I'm using rtf document(with bi publisher desktop plug in installed in the word document)... please suggest me the best way(to get the xml data from tables) to load the xml data into this rtf document..
I'm not developing oracle apps reports. It is for Oracle retail...
another doubt is... in the rtf document itself there is oracle bi publisher.. can it be used for generating xml data...
please bear with me and suggest me a way out
Thanks and regards

What will you be using in your production system to generate XML? Or are you just trying out BIP?
If you're familiar with dbms_xmlquery.getxml , you can pass your SQL to generate the XML output. Save the output in a file and use it in your RTF template.
If you have Oracle reports, you can create XML output when you run the report.

Export to quicktime best (and only) way to go?

Similar Messages

Maybe you are looking for