Export to tape failed

I did have lots of trouble using PPRO 5.5., stuttering video, no Encore library, bad editing conditions etc. After lots of tryings which didn't work, I decided to completely reinstall everyting and change the SSD for a oldfashioned 7200 rpm disk.
It Looks that changing my SSD drive for the OS and completely reinstall everything has solved most of my problems. I only don't know if it is the reinstalling or changing the SSD what helped me out.
I must do some editing to look if this stay this way. Hopefully it works now.
But one problem stays, and this is a main problem for me, because I use DV tape to archive my editing results. And without this feature PPRO 5.5 is not working for me.
When I try export to tape, the recorders start to record, but there is no video and no audio signal on the output. I did try two recorders and tried a lot of "external device" possibilities.
Capturing from tape goes well.
I did try the suggestions Harm Millard gave on one of his valuable forumsuggestions , to quit CPU accelerator and to change the IEEE driver into the "old" driver. But that didn't help much.
Anyone any suggestions to overcome this problem?
Thanks for replying
Chris Nierop

To answer your questions
2 decks, one is listed in the PPRO list: JVC BR DV 600 and an SONY DHR 1000 VC .
The JVC I already used when I edited with the PPRO 2.0, and that worked (at least in combination with the Matrox 100 card wich I used then) .
I did try different cables, I did completely new installation of windows 7, several new installations of PPRO 5.5, I did try to "power on" deck first, and then start windows, power on first after start windows and before starting PPRO, and all the combinations you can think of. I did try manually recording. I tried the two recorders, both failed. I searched the forumsites, I bought a custom build system completely conform the ADOBE specs, just to avoid the problems which I am in now. I did install only the ADOBE software to look if there could be some problems with other software.
Because Adobe suggested to install the "old driver" for the IEEE and use the "softwaresetting" I think Adobe PPRO 5.5 has a bug that they tried to "solve" with some special settings, that maybe sometimes helps, but not in my case. The last three months I am daily busy to get the software workable.
So far, so bad and I lost my trust in the ADOBE software. It looks to me that they never got to overcome the problems which they had in the 80 of the 20e century, when the computer software of the PPRO 5 series normally was named as "Plug and Pray", but then that was not only to blame ADOBE, the windows software also had his problems working with installed software.
But today, with the superfast systems it miust be possible to develope a system which is Plug and Play, with probally some minor settingproblems to solve.
Chris

Similar Messages

Cannot export to tape from CS4

I have PPro CS4 connected by firewire to either a Canon HV 30 MiniDV camera or a Sony GV-D1000 Mini DV deck. (I've tried both).
I am trying to export my project to MiniDV tape. I have succeeded in the past but for some reason now can't do it.
I select "Export to tape" in PPro and all seem to go smoothly, the device being controlled from the PPro device controller and the tape starting to roll. It's just that no image appears in the screen on the HV30 or GV-D1000, and nothing is recorded. I am following the instructions for each device regarding recording via this method. It just seems no data is being sent from the PC to the device.
Options in Edit - Preferences - Device Control are set for the approrpriate PAL system and device.
I can record from the device onto my PC using the same firewire port and cable.
I'm using Windows 7.
12Gb RAM
i7 chip
ATI Radeon HD5870 graphics card
Can anyone help, please?

Thanks again, Ann, but as mentioned in my "Dropping frames during capture" thread, this has already been tried and failed.
The following things have been tried and have all failed to prevent, roughly every minute or so during capture or export, two or three seconds of interference which results in lots of dropped frames during capture or a blank screen during export:
Different firewire cables
Different programs: PPro CS4; Pr Elements 9, Windows Live Movie Maker
Capturing to different hard discs
Capturing to external hard disc
Closing every non-essential process
Detaching every non-essential peripheral
Switching off all other electronic devices in that part of the house, phone included
Capturing from/exporting to different devices from different makers
Changing the firewire driver
I think it's either the firewire driver on Windows 64 bit, (althouhg I've treid changing it) or a problem with the graphics card.
The firewire slot is not in a card by itself, but part of a panel of many slots and plugholes at the back of my PC - USBs, minijacks, firewire etc I have no further slots available for a separate firewire card.
The only solution I can see is to save the project as a huge AVI file, transfer that to my lap top, make a movie out of it with Windows Live Movie Maker, and export from there.

CS3 Exporting to tape HELP!

Hi! I am using Premiere CS3 on Windows XP. I have a Panasonic mini DV camcorder plugged in. I am trying desperately to work out how to export my project to tape. I have the settings okay. I set the 'Assemble at timecode' to 10 seconds. I had recorded 30 seconds of black onto the tape previously. When I click
on 'Record', the camcorder gets itself to 10 seconds, frame by frame, and then stops- and I get a message of 'Recording Failed'.
I've tried it having the camcorder playing and on pause, and also stopped, but on playback setting.
What am I doing wrong?!
PRIZE for anyone who can fix this for me!!!

nope. sorry. to be honest I sorta think I recall that exporting to tape isnt a happening thing with premiere cs3...like it doesnt actually do that...but my memory is not so great as I am losing brain cell function on a regular basis.
is lemonbaden in any way related to baden baden ?.. a great great grandfather came from there ( baden baden ).
though I can't imagine what lemons might have to do with badens.

Creation of the export data source failed

trying to activate ods but getting this message that the creation of the export data source failed.
and it also gives message that RFC Connection to source system is damaged===> no metadata upload
Please can someone help me with this.
Thanks in advance.
Michelle

Hi,
Check ur source system connection. by going to RSA1-> Source System-> right click and then select check.
U will get the info about the source system Connection. IF RFC has failed then better be in touch with ur basis.
Or try restoring ur source system connection by
Source system-> Restore.
Its sets all the default conenctions b/n ur systems.
Once again check the connection now. if it says ok.. then try do the export data source and then assign the data source to info source and then maintain the Update rules..
Hope this helps-
Regards-
MM

Backup to tape failed in DPM 2012

I am new to DPM.
We have configured a protection group for short term goal with 7 days retention range, Synchronization frequency 6 hours. And recovery points are based on synchronization (means 4 Recovery points per day and DPM will have 28 valid restore points after a
week...!!??). In long term goals we have configured 2 recovery goals to tape ... 1 recovery point per week on saturday (retention 4 weeks) and 1 recovery point per month (on day 1 with retention range of 1 month).
Now Im getting PG status "backup to Tape failed" I want to know the process how DPM will check and verify recovery points on disk before writing them to tape.
Based on my protection group settings, there should be 4 recovery points on disk everyday. but there is something different result...see the below in reply.
My queries are:
1) On Saturday weekly tape job, does it require DPM to have valid 28 Recovery points?? What happen if any RP missing.
2) Due to some issues, if weekely tape backup failed on saturday. Can we resume it on monday,tuesday..with corrective actions??
3) the DPM process of verifying disk based recovery points before writing them to tape.

Hi,
<New questions Snip<
Q1) For file/volume protection, synchronization is not RP. We have to configure RP creation time manually.
A1) Correct, file synchronizations are not recoverable, only "recovery points" are recoverable.
Q2) For application's (SQL,EXCH,SHAREPOINT) recovery points each synchronization job will create a RP as per synchronization frequency.
A2) Yes, for applications like SQL and Exchange that support incremental backups, then incremental synchronizations are recoverable.
Q3) If a tape backup is getting failed due to invalid RP on disk, I am creating a manual RP with Express full backup(for databases) and a RP with Incremental(for file/volume share), then resuming tape backup. Is it correct way to do this?
A3) Yes, A manual Express full for application data or a manual recover point with synchronization for file / share data and that should allow you to manually create a new tape based backup from the alert.
Q4)How to enable the verify option to check the integrity of the tape backup?
A4) Simply modify the PG that has tape based protection and while on the "Select Library and tape Details" page, select the option "check backup for data integrity (time consuming operation)".
Q5) And what is Co-Location..!!
A5) Tape co-location allows data from different protection groups to be written to the same tape. You need to make a tape protection group set using the "Optimize usage" feature under the management - Libraries page of the DPM console.
See the following TechNet pages.
Tape Optimization Setup - Create-Modify Protection Group Set
http://technet.microsoft.com/en-us/library/jj628037.aspx
Tape Optimization Setup - Advanced Options
http://technet.microsoft.com/en-us/library/jj628016.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Export to PDF fails for some reports, but report viewer works

Hi all
Our application produces several different reports.
- Report A can successfully be viewed in the ASP.NET report viewer control and can be exported to PDF
- Reports B and C can successfully be viewed in the ASP.NET report viewer (all pages), but export to PDF fails with a very unclear error message. The stack trace is attached below.
Two days ago, reports B and C have fully worked, and I'm sure by 100% that the report templates haven't been modified since then.
Can anyone explain what is going wrong? Is there some internal logging inside Crystal Reports that can be investigated to find out about the reasons of the error?
Any help would be greatly appreciated!
Thanks
Kuno
PS.: The Crystal Libraries under investigation are quite old. In fact, it is a very old application that still runs under .NET 1.0.
CrystalDecisions.CrystalReports.Engine.ExportException: Fehler in Datei C:WINDOWSTEMP     emp_b9cf0dd0-8964-4ddf-ba09-0daaa4e1ef20.rpt:
Fehler von Export-DLL gefunden:
   at u263B.u263BJ(String u2660§, EngineExceptionErrorID u2660u25AC)
, Int32 u2660u266B)Int16 u2660
   at u263B.u263BD(Int16 u2660u2640)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
   at AdamsClient.Web.EngineerClient.TolerancesReportPage.btnSpecPDF_Click(Object sender, EventArgs e) in D:ProjektexxxxAdamsII SVNDevelopmentS
ourceAdamsAdamsClientWebEngineerClientTolerancesReportPage.aspx.cs:line 496
   at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
   at System.Web.UI.Page.ProcessRequestMain()

Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk

Any 3rd Party Application(s) to export to tape?

Heya guys. Hope production has been treating you all well. I'm kind of in a jam here where for some reason both my sony dv decks have stopped working via firewire. I currently need a third party application(if one exists) that can export a ProRes file to DV Tape. I'm about to go through the pain of reinstalling FCS 7, but I've asked a friend to come by with his cam for me to export a program to tape. I reinstalled my OS as a last ditch effort to see if that was the problem, sadly, it wasn't. So I can only conclude that my decks are... swabed.

That's strange then Nick. Almost all my timelines are in a different codec setting. I just figured FCP just plays em back through DV signal which is why all these years I've been able to export my ProRes timeline to mini DV tapes. Premier Pro did it as well...H.264 is another story. Been trying to switch over to FCPX lately so I don't wanna have to reinstall FCP 7 if I don't have to... or Premier for that matter. I don't mind converting the clips to DV but the question still remains, do you guys have any apps to export to tape?

Can't export to tape on Premier Pro CS4 Extended

When I attempt to export to tape from Premier Pro CS4 Extended, version 4.1.0, to a DV Cam, the tape rolls and records (with device control) but I get no video or audio.
I have:
-selected the timeline for the sequence
-the work area bar is over the entire sequence
-I’ve made sure the tape is record enabled
-I have tried two DV cameras, and three fire wire cords
-I am able to capture video into the computer using all of the above
-I’ve tried moving my project from my external hard drive to my internal one
Still no export…….
Any ideas why?
-I am using a Dell computer with:
            - Windows XP Professional 2002 Service pack 3
            - Intel[R] Core [TM]2 Quad CPU
            -Q9450 @ 2.66JHz
            -2/66 GHz, 3.25 GB of RAM
            -Physical Address Extension
            -Unfortunately I can not find the name of my video card but this computer was built specifically to edit video so I am sure it has one.

Make sure External Device under Export is enabled in the Playback Settings of the Program monitor.
See the picture below.

Can't export to tape ! Help !

Hi,
I'm having some trouble exporting an HDV sequence back out to tape from Premiere Pro CC.
I click on "File > Export > To Tape".
Then the "render and record" window pops up.
I click ok, but instead of the render line coming up and then recording, it just jumps to the "Transcoding to HDV" box, and almost instantly just returns to the "Render and record" one without doing anything.
And when I try to export a DV sequence, the VCR starts recording but received neither picture nor sound from PC.
Import works normally !
The problem is the same regardless of the recording device: Camcorder Canon HV20 and XHA1, or VCR Sony M25 .
Curiously, a few weeks ago, export was ok.
I don't understand !!!
With Premiere Pro CS6, everything is ok, both import AND export.
Has anyone experienced something like this before ?
Thanks in advance for your help !

Same problem here, double checked on another system with Adobe Premiere CS6 export works fine.
The same project settings / sequence settings (HDV 1440x1080@50i in Premiere CC and unable to export to Sony HDV deck. It starts rendering and writing but image stays black.
Using an other NLE software on the same system exports normally, so the firewirecard / deck and connections are fine.
Device control is the same as in CS6, disabled mercury engine (problem in the past)
Any idea would be appriciated

Can't export to tape...HELP PLEASE

Hi,
I can't seem to export my sequence to tape on my Sony DCR-PC8E PAL camcorder.
I select select File -> export -> export to tape
It says it is ready; starts the camera recording automatically; but the camcorder screen remains blue and no signal is recorded.
The camcorder says 'DV IN' on the screen.
Sending a sequence to tape from windows movie maker works fine.
Capturing from tape works fine.
Anyone got any ideas on how to make this work?
Thanks D.

Solved
You have to change the playback settings in the sequence settings for each sequence.

Can`t export to tape

When I try to export to tape the start dialog box appears after some minutes and nothing else happends
what is wrong, it is no problem when capture
It also appears a dialogbox Premiere runs at low memory ,is these two problems related?

Yes.
For the rest look here and read carefully, inluding all the included links and report back with at least all 16 questions answered: Some suggestions

Trouble with new Sony Z5U exporting to tape

I am using Premiere Pro CS3. Just purchased the New Sony Camcorder Model Z5U. Tried to export to tape and Premiere doesn't want to cooperate. Anyone having the same problem and if so, any fixes that you might have run across???

I exported the same project to a JVC model HR-DVS2 tape deck and it recorded it. I also have to confess that I am new to CS3. Not to Premiere. I have avoided using CS3 because I have not taken the time to learn it. I work with TV production and the timing has forced me to use old reliable 6.5. I guess I am getting too old to learn. I am having fits with CS3 because I didn't take the time to work with any of the Pro series. Have them all but didn't use them. First version crashed on me in a hurryup project so I gave up on it. I used to be able to figure these issues out on my own...now I'm lost.

Render and record, export to tape question?

Hi,
I have finished a ten minute HDV project.
I now want to export to tape. (HDV Sony V1e) When I hit export - tape then hit the render and record box. This then brings up the Export to HDV (transcoding to HDV) box.
The problem I have is that 10 min project trancodes for about ten minutes then just goes back to the render and record dialogue box, without the exporting to tape.
I then tried exporting a smaller chunk (25seconds) and this renders in about three minutes and exports fine!!
So, I think my camera etc is fine.
Why won't my ten min movie render and record?
Sometimes it does give me a low memory warning too. I have set the preference from performance to memory already.
Please help!
thanks
scott

Hi Scott,
I am having this very same problem.
Did you manage to solve it? If so, how??
I've been trying to figure it out for the past 5 days and it's driving me crazy!!!
I exported a 3 minutes sequence and it exported to tape fine. But when I tried to do the entire film - 55 minutes - it began the 'transcoding' then just stopped and went back to the 'render and record' pop up without any error message or anything.
I am trying to get from CS3 to a Sony HDV deck.
Thanks,
Alicia

Premiere Pro CS5 Not exportting to tape on TWO different Computers!!! HELP

I had a prior post in january with a new desktop having problems exporting to tape. when it would export a blue screen would come up at random times breaking up the recording. almost like the camera was losing signal with the computer.
Im capturing and exporting using a Canon XHG1 HDV camera.
Both the Laptop (sony vpcf11x) and Desktop (custom with intel sandybridge motherboard) can CAPTURE tapes fine. but export causes problems on BOTH machines.
Both of my computers (a laptop and desktop use the Intel i7 chipset.
I have a Third desktop (gateway something or other) that ive been using Sony Vegas to Export to tape and it WORKS EVERYTIME! with the same Camera and Firewire Cable.
Itried installing Sony Vegas onto the new Desktop to export and I get the SAME problem that I get with Exporting with Premiere.
has anyone else heard of these problems? it is really starting to irritate me. with everything ive done, it has to be something with Adobe. how can i have the same problem on two different computers?

Here are more specific information with my system and settings for you to see. I also included a video of my workflow and showing you what exactly is happening on export.
Project Settings:
Capture Format DV
Video Rendering and Playback: Mercury Playback Engine Software only
Sequence Settings:
DV NTSC
29.97 fps
720x480
Aspect Ratio 16:9
30fps Drop-Frame Timecode
Playback Settings:
Desktop Video Display during playback checked box
External Device: DV_29.97 720x480i
Aspect Ration Conversion: Hardware Only
External Device Audio
Export: external device DV: 29.97 720x480i
Disable video output when in the background is not checked
Export to tape settings:
Activate recording device is checked
assemble timecode, delay movie start, and preroll _ frames (none are checked)
abort after _ dropped frames (not checked)
report dropped frames (not checked)
render audio before video (is checked)
I render out the video to one file (on my desktop).
then import the clip into a new sequence with the above settings.
file>export>tape>
then it begins recording and drops out like the camera loses signal.
this is really frusterating.

Random freeze or stop on export to tape

I have an i7 2.93 GHz with 3GB DDR-3 RAM. I have a Zotac TX295 video card. The system is a dual boot with Vista Ultimate 32 bit/XP Pro 32 bit. I am primarily using Vista. I have 2TB between2 RAID pairs, 750GB OS drive and a separate 750GB data drive.
Windows, Adobe hardware firmware, etc. is all up to date.
4 weeks ago (6/6) I successfully exported over 8 hours of DV footage to a DVCAM and a mini-DV camera. Now i keep having a tape export problem. One of two things happens:
1. The tape will not record the full length of the project, not report any dropped frames but say it was successful. It's random. It can be a minute into the project or 30 minutes into it when it happens. When this happens you see the camera viewfinder flicker to a blue screen real quick before returning to the video and stop recording.
2. The video hits a random frame and continues recording but frozen on that frame with the sound stuttering on the sound of a single frame.
As of tonight now, I have an additional issue where once you try to export Premiere slows down dramatically. But, if I turn off or disconnect the camera from the computer everything suddenly speeds back up.
All the while Premiere still reports I have about 1.2GB of free memory. I even set the Page File to min. of 3 GB and a max of 6 GB.
Here's what I have tried but have still had no success:
1. I brought the project into a new one and deleted the render files and then re-rendered.
2. I exported the project out as a new AVI, brought that into a new project.
3. I exported the project out as a new AVI, switched to the XP OS, brought it into a new project in different scratch disk folders on a different hard drive.
4. I held down Shift while Premiere started to clear the plug-in cache.
Now the only recent changes that I'm aware of in the last 4 weeks are as follows (I listed what I did to try to resolve the issue):
1. I updated my RAID controller card so I moved the files to a non-RAID drive thinking the firmware update created a problem.
2. I updated the video card drivers so I rolled them back to the version they were 4 weeks ago.
3. I saw that there was a .Net Framework 3.5 Service Pack 1 update. According to Microsoft this only provided a security patch for Firefox.
I can't figure out what's going on. I can't export this project yet 2 projects that are from 4 weeks ago or older seem to export to tape fine. And the weird thing is if I take the exported clip of this project that won't export to tape and bring it to my friend's computer who has Premiere Pro 2.0 it exports to tape successfully every time.
I don't trust the stability of the software now. I even had a few weird instances that when mono clips were imported Premiere randomly saw them as stero clips.
Any ideas? I have another major project to start and the instability is really worrying me. Please contact me at [email protected]. Thanks.

One other thing...
I tried to different cameras, firewires and the firewire connection on my firewire card and coming off the motheboard.

Export to tape failed

Similar Messages

Maybe you are looking for