Export users and groups

Hi all,
i saw a thread about getting a list of all users from the repository, but can find it anymore..
How can i get a list from all users in OBIEE with there full name and it would be even better if the groups could be included too.
I can get a list with usernames from the catalog administrator tool, but i need full names.
regards,
Osman

Hi,
You can view users and groups in presentation services.Go to Settings->Admin->Manage Preenttaion Catalog->show all group and user
If you can get their full name from rpd.
If you are using external table authentication you can get them from db table.
I am not sure about exporting them.. :)
Thanks,
Srikanth

Similar Messages

Need to migrate Shared services users and groups from 9.3.1 to 11.1.2.2 ver

Hi All,
We need to migrate Shared services users and groups from 9.3.1 to 11.1.2.2 version. Any help would be appreciated. Can we use CSS import export utility?
Thanks in advance!!

Hi John, In my another environment I have to migrate the users and groups from Hyperion HSS 11.1.1.2 to Hyperion shared services 11.1.2.2. I am using LCM for that, when I export the users and gropus from 11.1.1.2, it exports fine but when i import it to my 11.1.2.2 using LCM, I am getting the below errors.
Error when I try to import the groups:
ErrorEPMIE-00051: Failed to perform operation on role. Could not locate role matching filter {0} and filter attribute {1}. Please ensure that a role exists matching the filter with filter attribute.
EPMIE-00024: Failed to import all of the membership info for group test group. Invalid group members encountered. Please ensure the validity of members and its existence in their respective providers.
Errors when i try to import the users:
ErrorEPMIE-00051: Failed to perform operation on role. Could not locate role matching filter {0} and filter attribute {1}. Please ensure that a role exists matching the filter with filter attribute.
EPMIE-00020: Failed to update user 04668162 during import. Invalid identity for user. Please ensure that the user is available in the system with the identity specified in the import file.
Any idea?
Thanks in advance.

Creating users and groups

Hi all,
I have about 100 users and many groups.
How can i create users and groups quickly?
Appreciate any help

Like the way you export planning application to file system and use it as a source to migrate it, In the same way take shared services file system export in the file system and migrate it to the new environment.
Cheers..!!!
Rahul S.

How to import user and group at EPM11.1.2?

I found a similar topic on this at User & Groups Issue
But sounds like there is big change a tEPM11.1.2, I didn't find CSSImportExport utility at all.
Could anyone tell me how to import users and groups from flat file at this version?
Thanks
Tony

You can only use LCM from 11.1.2, it is not really that different format from the CSSImportExport utility.
I find the best way is to set up a few users and provisioning and then use LCM to export, then you get a good feel to the format of the file.
Cheers
John
http://john-goodwin.blogspot.com/

Import user and group from dump.txt to ACS Solution Engine 3.3

I have export the user and group using the CSUtil -d on my acs v2.6. But ACS Solution Engine 3.3 does not have the CSUtil command to import the user and group database. Can anyone advise me?

I'm trying to do the same thing with no luck so far.
Documentation seems to indicate you can do this using RDBMS Synchronization but we haven't got it to work yet.
I read the doco as saying you create a csv and place it on an FTP server and ACS will read from that file. When we've tried, it rights its own file with a different extension and says it can't find the one we place in that same directory.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences users and groups login items...then I deleted them from the list but it did nothing.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences>users and groups>login items...then I deleted them itunes and emial from the list but it did nothing. They continue to open up every time I turn on my Macbook Pro.

Hi r,
It sounds like you're running Lion?
Have you tried running Verify and/or Repair Disk?
Have you tried running Repair Permissions?
Do you have at least 15% free space available on your HD?

How to change default /Users and /Groups to different Volume?

Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.

1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

Generate report to show all users and groups in Shared Services in EPM 11x

Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~Adeeba

Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba

Assigning Roles to Users and Groups

Hi,
We have installed EP 5.0 SP4...with Content Management...we configured the LDAP to Portal......all the users are maintained through LDAP only...the problem is assigning the Role's to user..here in portal how to assign the roles to the users...we are not getting the Role assignment option under Portal Admin TAB..is there any way to configure the roles to User's are Group's.....
it is an urgent assignment for me..help can be appreciated...
sudhir

Sudhir,
You can assign the roles to users and groups as below.
1. Select the System Administration in the top level navigtion
2. Select user administration
3. You can search for a specific user or a group from this iView.
4. Use the edit button to edit the profie of the user or group.
5. Search for the role in the search iView.
6. Add the role to the user of group and save.

Upgraded to 3.1 and lost all users and groups. How do we get them back?

We ran the update to Server 3.1 (from 3.0) on our Mavericks Mac-Mini Server.
Everything had been fine before the update, but now all users and groups have completely disappeared.
The only user we have is the main administrator log-in.
Since we verified that all of our data, wikis, and other items are still in place, it might be easier to just re-create the groups and users (and permission therein).
But, we cannot log into Workgroup Manager, nor can we add users/groups in the Server app (because it is "grayed-out").
Can somebody please provide a suggestion??
We are a small engineering firm with only 5 users, so it's not like this would take all day.
Thanks, Mike

Have you tried
sudo sso_util configure -r REALM_NAME -a diradmin afp
(cf. Lion Server: AFP users unable to authenticate with Kerberos after upgrading)in Apple Support ?
p.

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Error when opening User and Group Preferences

After upgrading to Lion there is an error when opening User and Group Preferences.
I´ve repaired permissions but the problem is still there...
Thanks...

Hi,
Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
or
Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
Hope it helps,
Reward points if helpful.
Regards,
Shailesh Nagar

Proper user and group rights

Dear readers and admins
My question is about the "correct" setting of the user and group rights, so the following is possible. It relates to Server 10.3 and to 10.4.
Requirements:
Group 1 = "Regular user"
Group 2 = "Administration, Accounting"
User 1 and 2 belong to Group 1, users 3 and 4 belong to Group 2.
User 1 & 2 must have read/write access to files and folders in Group 1, but may not have access to files and folders of Group 2.
User 1 & 2 must be in a position of creation and deletion of file and directory of Group 1, as if they were their own files and directories. I.e. User 2 must be in a position to delete or change files and directories that an other user of Group 1 has created.
User 3 & 4 must have read and write access to files and directories of Group 1 & 2. They must be able to creating and changing such files and directories, as if they were their own files and directories. I.e. User 3 & 4 must be able to create and change files and directories which belong to user 1 & 2.
As I understand it, this can be achieved with ACL's under Server 10.6.
Am I right?
What would such a structure look like with ACL's?
I unfortunately don't have a server 10.6 running, as, down due to technical problems, my server is down.
Thank you in advance for your help.
All a happy new year.
Regards
Thomas Thaler

Yes - and it's pretty easy.
1. You would create whatever share points you would like (very easy to do)
2. You would make sure in Workgroup Manager you have the users assigned to the correct groups that you discussed.
3. On the folders for Group 1 you would add ACL permissions of Full Control for Group 1 and Full Control for Group 2.
4. On the folders for Group 2 you would add an ACL permission of Full Control for Group 2.

I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

Are you using the Office for Mac 2011 version, as you need to do? The Office for Mac 2004 is Not at all compatible with Mountain Lion, and the 2008 version has been noted to have some problems running with ML.
Hope this helps

Export users and groups

Similar Messages

Maybe you are looking for