Export Using Compressor, from FCP, and Virtual Clustering

Has anyone successfully used Virtual Clustering - that is, setting up shared services for multiple instances so that you can use all 4 or 8 cores on a machine - when exporting timelines directly from FCP to Compressor 3?
I know in theory it doesn't seem like it could work (with FCP send frame-by-frame rather slowly and Compressor needing frames much faster) but Compressor 3's manual (pages 119-120) says that it should work.
I believe I'm following the instructions correctly, but it always fails...

Closin' out.

Similar Messages

Export Using Compressor from FCP fails every time

When I try to use the File>Export>Using Compressor command in FC Studio 2, everything seems normal until I submit the batch. But the job fails every time.
I get the following message: "Processing service request error: Final Cut Pro.app generated an error or unexpectedly quitUser aborted Media Server".
I've gone through all the discussion stuff on how Compressor needs to be reinstalled and all that. That's not my problem here. Compressor will work fine if I use it standing alone. It's only if I try to use the FCP export that this problem occurs.

Compressor works fine as a stand alone when I import a Quicktime file. However, if I try to export a suquence directly from FCP, it gives me a message "File Error: A file of this name already exists". If I press okay it exports it to Compressor which gives me a message, "Can't preview movie Final Cup Pro App is busy".
Then when I go ahead and load the output settings into compressor ( actual compressor window shows the sequence as being loaded) it starts to render and then it stops with the following message logged
"Name: MPEG-2 6.2Mbps 2-pass
Time Elapsed: 0:00:00
Time Remaining: 0:00:00
Percent Complete: 100
Status: Failed - Final Cut Pro.app generated an error or unexpectedly quitUser aborted Media Server"
Any ideas what the problem might be?
I am using a Mac Pro 8 core with 9gigs of ram and running tiger 10.4.10 and this is FCP Studio 2

Problem exporting using Compressor in FCP?

I had a problem exporting using Compressor in FCP and then I found an interesting article from Apple:
http://support.apple.com/kb/TS1099
but it doesn't really explain the solution. What steps do I need to take exactly in Compressor to make it work?

James M. has it right. Convert the MP3 and the WAV files to AIFF, 48khz, 16 bit and use those in your Sequence. You might even have to convert the existing AIFF file(s) if they aren't 48khz, 16 bit.
Once you've edited the new files into your Sequence, do an Audio Mixdown, then export.
-DH

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH. I'm not new at this. I re-installed FCP successfully. I trashed the preferences. Please help.

Do you have any filters applied to your clips?
This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
Anywho, export again, this time with "self contained" movie selected.
Then try to import to Compressor.

Export Using Compressor locks up FCP

Im kind of a newb to compressor so bear with me.... I was under the impression that when you export using compressor from FCP that you were still able to edit and work within FCP as compressor is a separate program. However, whenever i use the export using compressor option i get a dialogue box in FCP that says 'compressor processing' and then it goes through my whole FCP timeline frame by frame. I know in the past i have exported using that option and was still able to work inside of FCP while compressor rendered. Could i have possibly changed some settings in compressor to cause this to happen?

This also is normal when compressing an HDV source sequence into h.264.
HDV is a Long-GOP format, which requires a lot of processing power to decode. H.264 is also a highly compressed format, which also takes processor power to use.
Depending on your machine, you may want to look into how to set up a Quickcluster.

FCP export using compressor

does anybody know where the jobs compressor submits get stored?
I can't export via compressor out of FCP 6.1, (FCP quits responding) but if I export a quicktime then get that in compressor using a quemaster quick cluster, it rocks along fine until I forget I can't export out of FCP, or a freelancer does it and resources get stupid until the job finally finishes. cancelling won't fix it, quitting, shutting down none of it stops the job. If I could find where the job is stored I could trash it and work could renew. Thankyou

duh
users/library/aapplication support/compressor/history
fixed it. now if only I didn't have to worry about export using compressor from FCP 6.1 Studio2. wouldn't that be something? if it really worked? wow that'd be cool

Export DPX files from FCP with Timecode

Hi,
Have anyone found a way to export DPX files from FCP, and also get the timecode in the DPX header...
Thanks for answers!!
//P

Your workflow is not correct.
In FCP I bring the clip to the timeline, trim, color correct it then File> Export> Using Compressor. Compressor opens up and places the clip into the Batch Window. This works fine, but when I go back to FCP, delete the clip from the timeline and place an other clip there and when I Export>Using Compressor, Compressor places the clip in a new Window title "Untitle 1" and so it goes on. As far as I understood, whenever you add a clip from the FCP it places it below the first clip so when I want to add my settings, I can add all 3 settings to all the clips. Did I missunderstand something?
You're misunderstanding a couple of different things. When you send a clip or sequence from FCP to Compressor, you cannot then apply the settings you want in Compressor then go back to FCP and delete that clip from your sequence ... Compressor is trying to reference that sequence. If you keep removing clips, then Compressor won't follow those clips ... you're essentially breaking the link between Compressor and FCP by doing this.
Try this:
1. Load Clip A into the Viewer, Set your In & Out points and add your Color Correction.
2. Press Command U to Make a Subclip. This will create a separate "clip" in your bin. Rename as necessary.
3. Repeat this process for your other 19 clips.
4. Then Select all of your new subclips in your Browser, then File > Export > Using Compressor. This will open Compressor and add all of those subclips into the Job window.
5. Add your appropriate Target settings and set your Destinations and revise any filenames if necessary.
6. Click Submit.
For a good, quick overview on the basics of how and when to use Compressor, check out this video from MacBreak Weekly: http://www.pixelcorps.tv/macbreak153

Exporting from FCP and using Compressor at the same time?

Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

Only in FCP 7.

Exporting using Compressor failed, and other awekward issues with FCP

Hi FCP gurus! I need your help!
Everytime I try to export using compressor, my submission fails.
I even try a sequence a exported as m2v on Monday, but today is not working.
Compressor will some times say "Unable to view preview, FCP is busy". When I press submit, it goes to Batch Processor but it either will immediately show FAILED or it will just not do any processing. When I quit and restart, then the submission appears as failed.
Also when exporting, FCP comes back with a pop message saying that 4 files went offline. When I try to reconnect them it says: "There are not clips selected that have files associated with them". So, why is FCP constantly not able to fine this files, if they are not been used?
I need to export a file for my soundtrack guy, and he needs MOV, preferable DV-PAL or Motion-JPEG or similar frame-based codecs. What are my options?
In any case, what the problem here is that I CANNOT export anything. What shall I do? I already restarted the computer twice, nothing.
I realized that I have files using in this project, saved in two different external harddrives, do you think this has anything to do with the issue?
I am using FCP 5.1.4
Thanks so much in advance!

First off, fwiw, I never "send to compressor." I export a self-contained QT movie, not a conversion. Then I run that through compressor with the appropriate settings. I like the self contained file, it becomes a master from which I can make all sorts of variations. The only difference, in theory between self contained and reference, is that if for any reason you lose the render files the reference movie will not work.
Q1 No.
Q2 see above
Q3 There is no such thing as uncompressed. It's just a different codec rather than a perfect copy of your timeline.
Q4 lots of reasons for making a conversion, but none of them are valid for making DVD's
Q5 Nothing wrong with letting DVDSP make the encoding-- just be sure to get into the preferences for DVDSP and set the destinations to a folder for the project, so you don't overwrite any other projects. Depending on how long the project is, you can let it encode in the bg while you set up your project, build the buttons etc. It's all the same encoding engine, whether is is done in compressor or dvdsp. I find it much faster to use compressor then to take to dvdsp becaue you can use quickcluster.
Now a couple of questions for you: what sort of footage are you using and what are your fcp sequence settings?

Trouble exporting Flash from FCP, and, no MPEG-2 option?

Hello. I'm trying to export a short 5 minute video from FCP. There doesn't seem to be an option for MPEG 2 anymore. Am I missing it?
Second, when I export with the Flash (FLV) setting FCP "stops responding" every time. Any idea what's up with that and what I can do to resolve it?
Thank you!
Eric P

I was hoping to export MPEG2 directly from FCP, but I used Compressor as you suggested. Now, here's a really silly question: After I "submit" the file, it processed (I can see it processing in the Batch Monitor), but I can't find the file anywhere on my computer!
I thought I changed the destination to my desktop, but even searching the computer for the file name it doesn't come up. Am I overlooking something obvious??
Thank you again,
Eric

Anyone get FCP to 'export using compressor' without it crashing?

As per the subject lads, for a long while now FCP 6 produces the spinning beachball and hangs indefinitely when I try to 'export using compressor'. I have to export using QT, then import the QT file into compressor where it works from time to time ( I think it's a really buggy app ).
Done all the usual things to try to fix it including full updates etc but it still crashes FCP. It would be handy to get it to work so if anyone has an answer I'd be grateful.
Peter

Yep trashed the lot, but I do use instances. I've come across some folks who allow compressor to employ all the available instances but expect FCP to function in the background and they experience hangs and crashes. I have allowed compressor to use half my instances and it fairly whizzes through the work when dealing with self-contained QT movies ( when it isn't playing up ) but I didn't think that using half my instances would still crash FCp when exporting directly off the timeline.
I'll disable instances and see if that cures it. If it does then it's actually worth abandoning 'export using compressor' off the timeline when I know Compressor works so quickly with self-contained QT movies and instances.

FCP Export using Compressor hangs 'em both

I searched for the answer earlier this week. Didn't find anything, but I eventually figured it out. Here was my problem:
The Compressor preferences allow you to choose a default preset. I never had defined a default preset, and things worked fine. When I do choose a default preset (I chose DVD Best Quality: 120min: All), there were problems. Selecting sequences in FCP and doing "Export using Compressor" results in a hang on both apps.
The number of sequences or their lengths seem to have no effect on the process. Just thought I'd post this in case anyone else has the same problem.
Alan

This sounds different from my problem. I was getting a hang when the sequences were being added to the batch list. It wouldn't even give me a chance to submit the batch. Maybe someone else has a clearer idea of what you're experiencing.

Export using Compressor greyed out in FCP 4.5

The hard drive in my PowerBook recently failed. It was replaced by Apple and I've restored all of my software applications from a Retrospect backup.
I originally installed FCP with installer discs that were available for me at the company, now closed, that I used to work for until December of last year. (Thus the reason for reinstalling via Retrospect.)
FCP works without any problems other than this: when I attempt to Export a project, the option to "Export Using Compressor" is greyed out in the menu. Also, I cannot launch Compressor as a standalone application.
Any ideas? I was very meticulous in restoring Frameworks and Components into their proper Library and System folders. However I must have missed something. I've read through all of the FCP discussions mentioning Compressor and didn't come across anyone with a similar problem. So it clearly must be something I haven't done correctly.
This looks like one for someone who has deep awareness of not only Compressor but software installations and their included components. I hope that someone is reading this and can offer the nugget of knowledge that will get a project back on the air...
~ Ethan

Hi Jacob,
I notice the subject of your post involves an optical Intellimouse; I'm using a wireless trackball from Kensington. I don't suspect this is the culprit, but perhaps. I'm going to post my original message in the FCP discussion list and see if anyone has any feedback to offer.
Have you installed the recent Pro Applications updates? I have, but haven't gotten a sense of whether that's caused this current problem.
~ E

Quality differences between "Export Using Compressor..." and Drag & Drop

There are quite a few people out there discussing the 24p workflow for the new Canon HV20 (on hv20.com, dvinfo.net, etc.). The HV20 can shoot 24 progressive frames/sec, but stores them as 29.97 interlaced HDV on tape, with an arbitrary cadence.
One of the better workflows is to capture into FCP using HDV over Firewire, and use Compressor to extract the progressive frames from the interlaced. Its Reverse Telecine seems to automatically figure out the cadence. I've been testing this using the "Other Workflows > Apple Codecs > Apple ProRes 422 for Progressive material (HQ)" preset, with the following modifications, Frame Controls: On, Deinterlace: Reverse Telecine, Frame Size: 1920x1080.
That's just background.
The problem is this. If I export the HDV clip from FCP, "Export > Using Compressor...", the resulting 24p footage is extremely high quality. However, if I drag & drop the HDV clip directly into Compressor, or set up a Compressor droplet (arguably more straightforward for batch conversions), the resulting footage has obvious resizing artifacts (jaggies).
Obviously, I'm keeping everything consistent setting-wise, and have thoroughly examined the resulting .movs. The only difference is the actual image quality.
Anyone seen anything like this?
I'm less concerned about this specific workflow than I am about Compressor producing non-identical results from identical footage with the same settings, dependent on your chosen workflow...
Mac OS X (10.4.10)

What I need to know if it is a dramatic different in quality that I should use DVD Pro instead of iDVD.
If you want a DRAMATIC improvement in quality, shoot sharp, high quality content like Hollywood (usually on film) and have it compressed by high quality hardware encoders.
There is a good reason Hollywood DVDs look better than iDVD/DVD Studio Pro DVDs.
F Shippey

I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube,some of the photo near the beginning was corrupted.What steps should I take to export iMovie for youtube?

I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube, some of the photo near the beginning were corrupted on youtube. I tried a different photo, and the corruption took place at the same moment of the video. How do I prepare the video for export to get it ready for youtube? I wasn't sure whether to clik web or web streaming. Am I supposed to clik Quick Time after I clik Share?

I unfortunately cannot remember where I got the 'trrndlines' plugin... I assume that it must have been from CFX (as it is located under /Users/Dom/Library/iMovie/Plug-ins/cfx/XXXtrrndlines.bundle).
As for what it does, I also do not know, as I do not think I ever used it in my previous video projects.
At this stage, I think I just need to uninstall it so that iMovie doesnt try to use it.
Do you know how to uninstall a CFX plugin in iMovie?
NOTE: I have re-installed iMovie 6.0.4 (instead of iMovie 6.0.3), but still encounter the same issue.

Export Using Compressor, from FCP, and Virtual Clustering

Similar Messages

Maybe you are looking for